Dvd drive not working after upgrade to osx10.9

Since my Macbook upgraded to 10.9 the DVD drive no longer works.
Putting in either a pre-recorded disc or a blank to burn results in the disc being ejected after spinning for a few seconds.
The SD card reader also stopped working but I was able to correct that problem.

Same problem here on a mid-2010 21.5" iMac. Will read CDs and 1 out of 100 DVDs (1 kids' DVD, weird) but generally nothing in DVD format.
I tried all the solves listed (change prefs, reset EMC and both PRAMs, boot from internet disks, even an Endust cleaning CD). Nada. I then set up a Joint Venture call and they diagnosed the drive as faulty after repeating all of the above. They say it's very possible that dying Superdrives can read CDs and even burn disks but not read DVDs. They said it'd be about $150 to replace the drive at a Genius Bar.
Here's where I try to be helpful.
If you're found this thread and you're not under warranty, don't waste ANY time testing it or trying to fix. Certainly don't roll back to previous software versions -- wasting hours of time and eliminating software features you may like or introducing incompatibilities. Just hop on over to Amazon and buy a $30 (not kidding) Amazon Basics external DVD drive. I ordered one w/ my cleaning disk knowing I'd prob need it and prob wouldn't want to pay Apple to fix my 3-year old machine. Works like an absolute charm for me. Faster ripping CDs than the Superdrive, plays DVDs through DVD Player, VLC, or XBMC instantly.
So my advice (ignore it if you like, it's worth what you paid for it) is to ignore any conspiracy theories about whether Apple planned this. IMHO, it doesn't matter for $30. Your time is worth more than $30. Just buy an external and get on with your life. You can even use it with your drive-less Air when you get one, if you don't have one already. How often can you solve a complex computer problem instantly, and be better off in the end, for $30? Just do it. End of advice.
HTH.

Similar Messages

  • DVD burning not working after upgrading to 10.5.1

    Hi,
    I just purchased a macbook and found that dvd burning stopped working after upgrading to mac os 10.5.1. I went back to 10.5 and now it works without problems. Since so far I haven't experience problems with 10.5, I will continue using it.
    Anyway, I just wanted to let other users know about this problem. I didn't find any references about it in the forum.
    Best wishes,
    Manuel

    Hi,
    I just got DVD burning to work under 10.5.1. I had originally formatted the OS-X partition as "case sensitive". Today I reformatted the partition as a regular Mac-os journaled partition, re-installed leopard and the upgrade, and now DVD burning works fine. I am not 100% sure, but it seems that using the case sensitive format caused the problem.
    Manuel

  • DVD Drives not working after Snow Leopard install

    Hello all. I'm having problems after installing Snow Leopard. Om my MacBook Pro, my DVD drive doesn't even read discs anymore. It keeps it spinning for a while and then ejects it.
    Coincidentally, the drive on my iMac 3+ GHZ is not accepting my discs into the DVD drive. It's not sucking in the discs anymore.
    Both of these things started happening right after the Snow Leopard installation.
    Can anyone help?

    Have been running without trouble and had total ability to burn disc images to DVD until SL installation. after installation, every burn attempt fails to complete, give me an unrecoverabl, unable to restart error. I does burn data to the disc, but fails at some point near the end of the burn wich renders the disc a "coaster". I put my spare HDD back in wich was running 10.5, the problem exists with that drive also. My next step was to load a fresh drive with 10.5, even then the problem exists. I find it hard to believe that the drive failed exactly when SL was installed, more likely that the installation changed a hardware setting, or installed a firmware update which cause the problem. As I am a repair tech, I have done a ton of reaserch on the subject, and I find that litterally 10's of thousands of people have had the same issue after the SL upgrade. Come on Apple, I always heard you were better than Microsoft, but as everyone can see there is a problem. Get working on the fix and patch it just like Microsoft.

  • DVD drive not recognized after upgrading to W10

    Yesterday I upgraded from Windows 8.1 to Windows 10 on my Hp Pavilion Notebook PC. However, the DVD drive is no longer recognized, and I cannot play CDs or DVDs. The DVD drive is hp CDDVW SU-208FB SATA CdRom Device. Anyone who can help me?

    Hi: See if performing #3 and #5 resolution steps from the link below resolves the problem. Normally one of them should. https://support.microsoft.com/en-us/kb/314060  

  • Samsung External Drive Not Working After Upgrade to 10.9

    Hi,
    I upgraded to Mavericks (10.9) on Friday and now my external drive does not show up when I connect it to my Macbook Air (2GHz Intel Core i7, 4 GB 1600 MHz DDR3).
    My external drive is a 1 TB Samsung S2 Portable Drive.
    I am attaching how it appears in Disk Utility now.
    Please please can you help me? I'm nervous that I have lost all my personal data.
    Thanks,
    Emmett

    The drive may have some software on it that is incompatible with Mavericks. Not your files that are on the drive, but something from the manufacturer of the drive.
    There may be some software on your mac, also from the drive manufacturer, that is usually used for accessing the drive, and this may be incompatible with Mavericks.
    Or your drive may just have taken a very inopportune time to die.
    I'd try:
    a different USB or firewire cable
    It would help to give us more information about your computer. If you can, use EtreCheck  Etresoft: EtreCheck  to generate a system report and paste it in a response here.
    Try a safe boot (restart, hold down shift until you see the Apple logo). Then try to mount the drive. If this works, then you know the problem is with some 3rd party software on your mac, probably some utility from the drive manufacturer.  Mac OS X: What is Safe Boot, Safe Mode?
    TechTool may be able to repair the drive so that you could mount it. Techtool Pro 7
    Look on the drive manufacturer's website for an update to the software.
    If you have another computer with Mountain Lion on it, perhaps you can use this computer to copy the files, then erase the drive, and then put the files back, without the incompatible software.
    Maybe the drive will mount in target mode on your mac or another mac, and you could transfer the files. How to use and troubleshoot FireWire target disk mode

  • USB Flash drive not working after upgrade.

    Its a SanDisk 8GB USB memory stick with the U3 filesystem on it. It works fine on Windows machines and on 10.5, but won't show up as a useable volume in Finder when inserted into my MBP.
    Oddly enough, it does show up when I run Parallels - but only in the windows VM. It also shows in Parallels in the list of attached USB devices.
    It just won't mount as a volume.
    Any ideas?

    Hi,
    copy anything on your drive to your desktop in parallels then reformat the drive.
    There's a good article Here on how to format a drive for Mac and Windows.
    Regards

  • Bluetooth Driver In Windows 8.1 is Not Working after upgrading please help (pavilion g6 2008Tx)

    Bluetooth Driver In Windows 8.1 is Not Working after upgrading please help (pavilion g6 2008Tx)
    what cAN i do to make it work?please help

    Hi:
    If your model uses a Ralink wireless card, see if installing this bluetooth driver works.
    http://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_135494_1

  • Super drive issue not working after upgrade of Maverick or Mountain Liont

    Super drive issue not working after upgrade of Maverick or Mountain Liont
    try this commands , it will wrk and respond after few trys 
    go to APPS - Utiltiy - Terminal
    Put these commands in
    drutil status
    drutil info
    drutil getconfig
    drutil eject
    it will keep ejecting for bit or sign of life in it and after couple try in 5 mins it will wrk. and dont waste ur money to buy new one .

    Super drive issue not working after upgrade of Maverick or Mountain Liont
    try this commands , it will wrk and respond after few trys 
    go to APPS - Utiltiy - Terminal
    Put these commands in
    drutil status
    drutil info
    drutil getconfig
    drutil eject
    it will keep ejecting for bit or sign of life in it and after couple try in 5 mins it will wrk. and dont waste ur money to buy new one .

  • Iphone 4 Home button not working after upgrade to OS 4.3.5

    Iphone 4 Home button not working after upgrade to OS 4.3.5.Please help!!!!!!!!

    It seems that settings of mail accounts have something to do with it. I've delete my gmail account and am now using Microsoft Exchange. It seems better, yet not perfect. The issue is definitely due to OS 4.3.1
    Apple answer is - no answer. It is a shame that the quality of their products, in terms of design and concept, is not match by a care for customers. It is not normal that I, as a customer, have to spend hours reading Apple Discussions forum to try to understand what the problem is. A little more respect for a customer that spend big $$$ buying their products wouldn't hurt.

  • File- Export not working after upgrade from 11i to R12

    Hi,
    File -> Export not working after upgrade from 11i to R12.1.3 in few systems. Can you please let me know what could be the issue.
    If export record count more than 200 it is working fine in all the systems and if change the profile option "Export MIME type” value to ‘text/tab-separated-values’ from application/excel also it is wokring.
    Thanks and Regards,
    Jagadeesha

    Enabled the FRD. Below are few last lines. Can you please let me know what i can in this log file contents.
    In Argument 1 - Type: String Value: global.frd_debug
    Executing GET_ITEM_PROPERTY/FIELD_CHARACTERISTIC Built-in:
    In Argument 0 - Type: Integer Value: 196613
    In Argument 1 - Type: Number Value: 54
    Out Argument 0 - Type: String Value: 12
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: Entering app_menu.set_prop.
    In Argument 1 - Type: String Value: global.frd_debug
    Executing FIND_MENU_ITEM Built-in:
    In Argument 0 - Type: String Value: FILE.EXPORT
    Out Argument 0 - Type: Integer Value: 19
    Executing GET_MENU_ITEM_PROPERTY Built-in:
    In Argument 0 - Type: Integer Value: 19
    In Argument 1 - Type: Number Value: 79
    Out Argument 0 - Type: String Value: TRUE
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: Completed app_menu.set_prop.
    In Argument 1 - Type: String Value: global.frd_debug
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: Completed app_synch.menu_toolbar_sync. Event is WHEN-NEW-ITEM-INSTANCE.
    In Argument 1 - Type: String Value: global.frd_debug
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
    Out Argument 0 - Type: String Value: NORMAL
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
    Out Argument 0 - Type: String Value: NORMAL
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: NULL
    In Argument 1 - Type: String Value: GLOBAL.OUT
    Executing USER_EXIT Built-in:
    In Argument 0 - Type: String Value: FND GETPROFILE NAME="UPK_RECORDING_ENABLED" FIELD="GLOBAL.OUT" N
    FNDCPVCM, 11, Built-In, Entry, 316509814, USER_EXIT
    FNDCPVCM, 11, Built-In, Exit, 316509814, USER_EXIT
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: GLOBAL.OUT
    Out Argument 0 - Type: String Value: N
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: system.current_form
    Out Argument 0 - Type: String Value: FNDCPVCM
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: system.current_block
    Out Argument 0 - Type: String Value: MASTER
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: system.current_form
    Out Argument 0 - Type: String Value: FNDCPVCM
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: system.current_block
    Out Argument 0 - Type: String Value: MASTER
    Executing GET_APPLICATION_PROPERTY Built-in:
    In Argument 0 - Type: Number Value: 75
    Out Argument 0 - Type: String Value: IHR40P
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: Completed call_all_libraries. Event is WHEN-NEW-ITEM-INSTANCE.
    In Argument 1 - Type: String Value: global.frd_debug
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: Completed app_standard.event. Event is WHEN-NEW-ITEM-INSTANCE.
    In Argument 1 - Type: String Value: global.frd_debug
    FNDCPVCM, 10, Prog Unit, Exit, 316509814, /FNDCPVCM-3/P45_30_DEC_201223_28_33
    FNDCPVCM, 9, Trigger, Exit, 316509814, WHEN-NEW-ITEM-INSTANCE
    FNDCPVCM, 8, Prog Unit, Exit, 316509814, /DMU-4/P8_30_DEC_201223_23_12
    # 15 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301498413820
    WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3
    # 16 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301512613925
    WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3

  • Ipohone 4 hotspot not working after upgrading to ios7.1 ?

    my ipohone 4 hotspot not working after upgrading to ios7.1 but my some friends having iphone 4s its works fine and those having iphone 4 it's not working although we all have same operator and same operating system (i.e ios 7.1).I think this is problem only  with iphone 4 users with ios 7.1 , so apple plz fix it in ur next update.

    You don't like the answer?
    Again it's not a bug, use a supported carrier if you want Personal Hotspot.
    Read the list one more time, if carrier is not on the list, IOS7.1 patch the loophole.
    Message was edited by: ckuan

  • Web Service is not working after Upgrade SAP EHP6

    Hi ,
    Recently we upgraded SAP ECC 6.0 to EHP 6.
    We have a custom web service which is consumed in  .NET Application to get the Sold To from Sales Order.
    the service is working perfectly before upgrade and it is not working after upgrade to EHP6.
    When I tested the Service in WS Navigator in SAP, it is working fine.
    We raised a message to SAP and SAP analyze the Traces and confirm that the HTTP Request Header coming from .NET application is not having User ID and Password , so it is throwing exception from SAP as unauthorized.
    But in service it is configuration as basic authentication and log on using user id and password and .NET application is calling service by passing user ID & Password.
    Customer is not happy as it is working before Upgrade and SAP confirmed every thing fine in SAP, but the service is not working.
    we did the below steps.
    Regenerated the configuration
    Re imported the Certificates
    Activated the service in SICF.
    Please let me know if anybody have same problem or if any steps we are  missing.
    thanks.
    Uma

    after changing the .NET Application , Service is working fine.

  • TS1702 My app store, Apple ID, safari, and most other apps do not work after upgrading to iSO 6, How do i solve this problem?

    My app store, Apple ID, safari, and most other apps do not work after upgrading to iSO 6, How do i solve this problem? Can somebody help me please?

    The App store is a problem for many and I have not seen a solution.
    What is "wrong" with your Apple ID?
    Try the following:
    - A reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory settings/new iPod.

  • IPhone 4's WIFI has been not working after upgraded to 6.1.3(10B329)

         My IPhone 4 was working fine with its WIFI when it is running in default IOS version, I believe it was 5.x.x version, however after I upgraded to 6.1.3(10B329) then WIFI got very aweired issues again and again.starting from then I never get my WIFI working again:
    1. Sometimes I can connect to my home's network and keep alive for 1-2 minutes then WIFI will not work on IPone, my home's router is not working either, I need to restart my home's router manually;
    2. I can connect to my office's network and keep alive 5-10 minutes then WIFI is not working, however my office router is not affected; however the following days then I can't connect WIFI to office's network any more.
    3. I tried to connect to other public area's free network via WIFI, however never joined in.
         I called Apple's service centre couple of times they have no clues, they said they never met this problem before for WIFI not working after upgraded to IOS 6.1.3 and no suggestions from them at all, every time I called them they gave me the same suggestion, such as restore-re-install, check your own router etc, nothing help, however my friend bought a brand new IPhone 4 with default IOS version 6.1.3 which is working perfectly without any issues on its WIFI then I believe this is a completely software issue.
         I know this is a general issue for Apple users and I refuse to upgrade to higher version as I am not sure the higher version can fix this issue however I am pretty sure the newer version of IOS did bring a lot of new bugs, anyone can provide me any suggestions guys ? THANKS A LOTTTTTTTT!!!!!!!!!!!!!!!!
    Terrence

    I have fixed this issue after upgraded my router's firmware finally, this is a completely compatibility issue between Apple and other third party manufactures, hopefully we can get compabitlity list for each future IOS version ahead of time which can potentially avoid such kind of embarrassing situations moving forward, thanks !

  • IMessage does not work after upgrade to iOS 8.1.3 to my iPad 4

    iMessage does not work after upgrade to iOS 8.1.3 on my iPad 4

    I Fixed it by trying to sign in with a different ID and canceling when it asked For a password and then signed in with my ID and it works! No more error message. I got this idea from another discussion. Thank you for replying though.

Maybe you are looking for

  • Problems with binary files

    Hello everybody! I'm having deep trouble with reading from binary files. I have opened a DataInputStream with a FileInputStream to read the data (which consists of a lot of short-Variables) into my program. Then I wondered why the data read is always

  • STILL having trouble with in app purchases

    Everything I've read this morning says everything was up and running but since yesterday's outage I have been unable to complete an in app game purchase in a game I play called Puzzles and Dragons.  After confirming I want to make the purchase it the

  • Tables not allowing inserting

    Hi im new to all of this and so going at my own pace, i quite literate at sql for making tables and inserting data from a live website but i used a different product. The trouble i am having with this product is that when i log into either Admin or H

  • How to integrate mapviewer in obiee 11g?

    Hi , May i ask you how to configure mapviewer in oracle business intelligence ( i have already installed it)?

  • I have forgotten my iphone passcode, can anyone help me please? thanks

    I recently changed my iphone 4 passcode, soon i forgot it, i have tried and tried to remember but i cant.so now my iphone is disabled. i tried backing up my iphone on itunes but it told me that i need to turn off "find my iphone" on my device which i