DVD Drive on 4-5 yr old Macbook Pro

MY DVD drive is ejecting my discs. Is this a way of telling me to clean the lens, or is there some way to fix this drive?
It has the power to eject so it is working. Is there a way to get the drive up and running without removing it, or replacing it?

You could always try one of those 'lens cleaning' kits.... if no joy with that you'll need to take your machine to your local Apple Store or an AASP and have them check out the drive. If it needs to be replaced, you can either have Apple do it or (less expensively) DIY.
Clinton

Similar Messages

  • My cd/dvd drive is inop on my 13inch macbook pro and will not show a disc or eject it

    cd/dvd drive will not work and will not display any disc in the drive. I have been unsucsessful in trouble this and the blank cd-r currently in the drive won't even eject manually even with a restart.

    This fixed my issue, which sounds just like yours:
    http://www.powermax.com/askjacob/2012/02/optical-drive-in-imac-not-accepting-cdd vd/
    Basically:
    1) Shut down
    2) Wait until iMac has completely powered off
    3) Hold down mouse button
    4) Power on iMac and continue to hold down mouse button
    5) Listen for sound of drive cycling itself (makes the sound of ejecting a disk)
    6) Let mouse button go
    7) Log in as normal
    Good luck!
    - Tom -

  • My dvd drive won't work on my MacBook Pro.

    I've looked through tons of forums on this subject but have only found people that have the same problem as me but no solutions. I slide in a store bought DVD movie it spins and whirs for a few seconds and then gets spit back out. No sign of it even reading the DVD at all. Please help.

    Probably you have already read this article. If so ignore this reply.
    http://support.apple.com/kb/HT2801

  • After a clean install of the original OS 10.6.4 on my old MacBook Pro, I'm not able to install iLife with the application DVD. Anybody can help?

    My old MacBook Pro 13" 2011 (2.4 Ghz, Intel core duo, 10Gb RAM, 250Mb HD) was running on Lion 10.7 (upgraded last Spring from the original Snow Leopard). As I got a new laptop just a week ago, I was trying to restore the old one to the original factory settings and resell it.
    After unsuccessfully trying to restore Lion with the remote apple server and after going through several messages here in the community, I was finally able to re install the original Snow Leopard system from the Mac Os X install DVD that came with the computer. I did that booting the laptop from the DVD, going to disc Utility, making the partition GUID formatted Mac Os Journal extended, and then installing the system. The hard drive had been erased previously.
    It all seemed to work well; I had intended to shut down and leave the option to the future owner to configure the computer and perform the additional installs. But to double check that everything was ok, I decided to go ahead instead, and install the applications that were on a separate DVD (AHT Version 3A192, Disc Version 2.0), like iPhoto, iMovie, iDVD, etc.  Unfortunately, as soon as the installer would begin to work, after clicking on the agreement and all the preliminary steps, it would quit with an error. I tried several times.
    Does anybody have a clue of what happened and how I can fix it? I hope you can help me! Thank you!

    Selling old Mac
    Selling old Mac (2)
    Selling old Mac (3)
    Selling old Mac (4)          Apple support

  • I have a 2 year old MacBook Pro and the superdrive has stopped working, it won't take discs in as if there is one already inside but iTunes or the dvd player doesn't recognise that there is a disc inside and if there is it can't be ejected

    I have a 2 year old MacBook Pro and the superdrive has stopped working, it won't take discs in as if there is one already inside but iTunes or the dvd player doesn't recognise that there is a disc inside and if there is it can't be ejected, i have tried shutting down and restartinf while holding down the trackpad, as recommended on some forums but that has done nothing
    It might be a huge coincidence but the drive was working fine before i installed lion?

    Installing Lion would not cause the superdrive to stop working.  Are you unsure as to whether or no a cd/dvd is inside?  Something may be broken inside and you should consider bringing it in for service.

  • Where can I buy a larger hard drive for my late 2008, 15" macbook pro?  From reviewing questions and answers on the support community it would appear that having Apple remove the old and install the new hard drive is recommended.  But how/where?

    Where can I buy a larger hard drive for my late 2008, 15" macbook pro?  From reviewing questions and answers on the support community it would appear that having Apple remove the old and install the new hard drive is recommended.  But how/where?

    Welcome to Apple Support Communities
    You can install the new hard disk yourself if you want to. You just need a 2'5" SATA II hard drive, which is compatible with your MacBook Pro. You can buy one at OWC > http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/ You can filter hard drives by computer, so press a "Click to view all...", choose your computer in the sidebar and it will give you the compatible hard drives.
    There are different brands for the MacBook Pro. The most recommended are HGST and Seagate, which have good reputation. A 7200 rpm hard drive will give you extra performance

  • I am trying to restore my old Macbook Pro data using Time Machine on a new Mackbook Air from external hard drive, but when I install I get two different loggin accounts and I only want one loggin account

    I am trying to restore my old Macbook Pro data using Time Machine to a new Macbook Air from an external hard drive, but when I restore I get two diferrent loggin accounts and I only wnat one loggin account to access all my data/files?

    This web site might answer all of your Time machine questions:
    http://pondini.org/OSX/Home.html
    Ciao.

  • Old MacBook Pro slow and hangs frequently, hard drive problems?

    Hi,
    I have an old Macbook Pro (one of the originals, from about 4 1/2 years ago). Recently I've been noticing that it runs really slow, especially when its been running for a while and there are multiple programs open. It will take a long time to switch between windows, opening a tab in Safari will usually cause a spinning beach ball for 10-15 seconds and Safari crashes frequently. Other programs have similar problems, but don't normally crash. It's running Snow Leopard and has 1GB of RAM. Obviously I expect it to be slower with lots of stuff open, but my usage patterns haven't changed and its performance certainly has. The harddrive always seems to be being accessed when I have these problems.
    The hard drive S.M.A.R.T. status is "verified," and I ran the Apple Hardware Test and it came out fine. But I'm still really worried that something could be going wrong, especially with the hard drive and since I am going away in a few weeks to work on a project and will be away from my backup drive I really want to make sure any problem is taken care of beforehand.
    Does anyone have any ideas as to what could be the the problem or about anything I should try?
    Much Thanks.

    With lots of concurrent processes and insufficient memory you will experience slow performance and beachballing. This is because the OS is forced to use the hard drive to replace the non-existent physical RAM. See the following:
    About OS X Memory Management and Usage
    Reading system memory usage in Activity Monitor
    Memory Management in Mac OS X
    Performance Guidelines- Memory Management in Mac OS X
    A detailed look at memory usage in OS X
    Understanding top output in the Terminal
    The amount of available RAM for applications is the sum of Free RAM and Inactive RAM. This will change as applications are opened and closed or change from active to inactive status. The Swap figure represents an estimate of the total amount of swap space required for VM if used, but does not necessarily indicate the actual size of the existing swap file. If you are really in need of more RAM that would be indicated by how frequently the system uses VM. If you open the Terminal and run the top command at the prompt you will find information reported on Pageins () and Pageouts (). Pageouts () is the important figure. If the value in the parentheses is 0 (zero) then OS X is not making instantaneous use of VM which means you have adequate physical RAM for the system with the applications you have loaded. If the figure in parentheses is running positive and your hard drive is constantly being used (thrashing) then you need more physical RAM.
    Also, a small hard drive with too little free space and a system lacking in any regular maintenance can also lead to slow performance. See the following:
    Kappy's Personal Suggestions for OS X Maintenance
    For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utilities are: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible. TechTool Pro provides additional repair options including file repair and recovery, system diagnostics, and disk defragmentation. TechTool Pro 4.5.1 or higher are Intel Mac compatible; Drive Genius is similar to TechTool Pro in terms of the various repair services provided. Versions 1.5.1 or later are Intel Mac compatible.
    OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts had been significantly reduced in Tiger and Leopard. These utilities have limited or no functionality with Snow Leopard and should not be installed.
    OS X automatically defrags files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems.
    I would also recommend downloading the shareware utility TinkerTool System that you can use for periodic maintenance such as removing old logfiles and archives, clearing caches, etc. Other utilities are also available such as Onyx, Leopard Cache Cleaner, CockTail, and Xupport, for example.
    For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the commandline. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard.
    When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
    Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
    Backuplist
    Carbon Copy Cloner
    Data Backup
    Deja Vu
    iBackup
    JaBack
    Silver Keeper
    MimMac
    Retrospect
    Super Flexible File Synchronizer
    ynchronizer
    SuperDuper!
    Synchronize Pro! X
    SyncTwoFolders
    Synk Pro
    Synk Standard
    Tri-Backup
    Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
    Additional suggestions will be found in Mac Maintenance Quick Assist.
    Referenced software can be found at CNet Downloads or MacUpdate.
    This should give you a few things to start sorting things out and getting better performance from your computer within its limitations.
    If you have a Core Duo model then 2 GBs is the maximum RAM you can install. If you have a Core 2 Duo model then you can install up to 4 GBs but they system will only make use of 3 GBs. As for the hard drive it can be replaced. Notebook drives in the 250 to 500 GB - 7200 RPM range are relatively inexpensive. Visit OWC for pricing on drives and RAM. Visit Data Mem for pricing on RAM.

  • How to migrate from my old MacBook Pro to a new one with less disk space and an external hard drive?

    I have just bought a new MacBook Pro and an external hard drive.
    Yet I have problems migrating data from my old MacBook Pro (more internal disk space with around 500 GB data) to my new one (internal disk space less than 500 GB). 
    I have connected all 3 devices but it seems the Migration Assistant does not have an option for us to select to migrate to an external hard drive.
    Any other way to do it?
    Kindly help me.  Thanks.

    For your situation, Target disk mode may be the most efficient method:
    http://support.apple.com/kb/ht1661
    Ciao.

  • Can I use my old Macbook Pro as an external disc drive while installing Windows 7 through boot camp?

    I want to install the Windows 7 CD on the newest version of the 2013 Macbook pro 10.9.2 running OSX Mavericks, through Boot Camp.  It does not have a disc port, nor do I have an external disc drive....but I do have an older macbook that does have a disc drive and I know you can supplement it for an external disc drive.
    My question is can I use my old Macbook pro's as an external disc drive for the installation of Windows 7 in Boot camp? Will this be a problem? Or do I have to buy an external disc drive separately.

    http://support.apple.com/kb/HT5287

  • Whats the best way to transfer everything from my old macbook pro to a new mac mini, i have a external hard drive which i backup to regularly via time capsule

    whats the best way to transfer everything from my old macbook pro to a new mac mini, i have a external hard drive which i backup to regularly via time capsule

    Check out > OS X Lion: How to use Migration Assistant to transfer files from another Mac

  • I just bought a MBA and I need to move my photos and itunes to an external hard drive (from my old MacBook Pro) because they won't fit on the Air.  I got the photos moved fine and I followed an online tutorial to move the necessary files for itunes, but i

    I just bought a MBA and I need to move my photos and itunes to an external hard drive (from my old MacBook Pro) because they won't fit on the Air.  I got the photos moved fine and I followed an online tutorial to move the necessary files for itunes, but it didn't work.  The files copied fine, but when I tell iTunes on the Air to look at the external drive for the library, it doesn't find anything.  What I copied was the entire iTunes Media folder.  So, how do I move the necessary iTunes files from my old Pro to a external drive so I can access them from my new Air?  Whew!

    iTunes- How to move the library to an EHD
    After you move the library you need to open iTunes by first depressing the OPTION key then launching iTunes. You will be given a choice of which library to use. This can then be made a permanent change, if you wish, in the Advanced section of iTunes preferences.

  • Trying to instal a new hard drive in my old macbook pro laptop but it wont recognize the disk to install osx

    I want to give my old macbook pro away as a gift & bought a 250 GB SATA internal hard drive and installed it, then popped in the osx install disk.  When I start it up it begins well, but when it gets to the point to install the software on the drive, the drive simply doesnt show up on the menu to be chosen to instal the software.
    The cables are on right and should be working well, so I don't understand why this brand new, never used hard drive doesn't allow the software to mount.  Thanks for the help! 

    jcbarker wrote:
    It's a toshiba 250 gb.  The place I bought it from said it was, but as I type this, I'm startting to think it's not.  Could I simply take it out of the laptop, put it into an enclosure and format it using another mac? 
    Would that work or is there a better/ different way?  Thanks again.
    How about an exact model number, there are a lot of 250G Toshiba drives, but even if it is formatted for Windows it should not be necessary to remove it just to format it.
    Can you see the drive in Disk Utility? (Applications>Utilities>Disk Utility)

  • External dvd drive won't work on USB macBook air

    External dvd drive won't work on my macBook air usb port.  It works on older versions of air and iMac.
    Any ideas.  Tried the left shift, control, option and power button sumultaniously, but did not work.

    I know that no one has replied yet, but figured out the issue.  I called Applecare and they couldn't figure it out, so sent me to a genuis at the Apple store.  They too couldn't figure it out and told me that it was a firmware issue with the Toshiba dvd external drive.  When I got home, I thought I would try one more thing.  I hooked it up to a powered hub and it works perfectly.  I'm not sure why no one else thought of it, but glad that I did.

  • My 3 year old MacBook Pro, with OS 10.7.1, won't play movie DVDs I burned on Panther. Why?

    My 3 year old MacBook Pro, with OS 10.7.1, won't play movie DVDs I burned on Panther.
    Why?

    But to answer your question, you might be able to create a ISO of the DVD and burn that to a new DVD.
    Insert your DVD.
    Open /Applications/Utilities/Disk Utility.app.
    In the left side of the window, select the “DVD”.
    Click “New Image” from the Disk Utility toolbar and select where you want to save the temporary image. For “Image Format”, choose “DVD/CD master” and for “Encryption”, choose “none”.
    The image extension in the “Save As” box will be .cdr (this is what you want) — click “Save”.
    Once the temporary image is created, it will show up on the left side of the Disk Utility window. Select it.
    Insert a blank DVD (I prefer Verbatim discs).
    Click “Burn” from the Disk Utility toolbar.
    Another problem could be that you burned the DVD using a codec that your new machine doesn't have.
    Install Perian, VLC and Flip4Mac, that combination will play anything.
    Also install Flash for web content and Silverlight for Netflix.
    http://flashbuilder.eu/flash-player-version.html

Maybe you are looking for