DVD drive replacement on Satellite 1400

I have Satellite 1400-153E Laptop. Where are the fixing screws for the DVD player located please?

To remove optical disc drive you must disassemble the whole notebook. The optical disc drive is connected to mainboard and you need access to right connector. Unfortunately maintenance manuals document is not public document and there is no step-by-step explanation how to do this.
Google a little bit around. Maybe you will find instruction how to do this.

Similar Messages

  • DVD drive replacement on Satellite A100-646

    Hi all,
    I want replace the DVD drive on my laptop. (I have many problems never solved)
    Do you know if exist a list of compatibility model for the A100-646?
    Model to suggest me?
    Thanks a lot.
    Regards
    Fabrizio

    Hi!
    In your case I would only choose a DVD drive from the list of the user manual. Otherwise the drive could not work and/or recognized.
    By the way, if you have lost your user manual you can download it on the Toshiba website:
    http://eu.computers.toshiba-europe.com
    You can also look on eBay for a second hand drive. Maybe there you can find a good offer.
    Bye

  • Broken DVD Drive on my Satellite M35x laptop

    Hi,
    the CD-DVD Drive on my Satellite Laptop apparently is broken and I was thinking about purchasing an external CD-DVD Drive and would appreciate HELP.
    In the event that I need to RE-Install Windows, would I be able to do this with an External CD Drive since I believe I need to boot from the CD to begin the reinstall and I am not sure if the Laptop will "recognize" the external drive?
    Thank you,
    Bob

    Hi Barrie, I purchased a (used) Drive for a M35X Laptop and to a non techie, it looked just like the one that was inside the Laptop but when I slide the replacement DVD-CD Drive in the opening, it did NOT "click-in" (connect to the MB) and wehn i turned the Laptop on and ent to My Computer, their was NO DVD-CD identified.
    I tried install new HW but again, the Drive was not recognized so my deductions are that the Drive may look just like the other one but it is not meant for this system, the drive could be OK but the connection to the MB is defected, their is something not functioning properly on the MB or most likely, I don't know what I am talking about and need ALL the H-E-L-P that I can get!
    Thanks,
    Bob

  • DVD drive light on Satellite M50 does not turning OFF, drive not reading CDs/DVDs

    Hello,
    I have a Satellite M50-mx5 with a Mat****a DVD drive. When I insert CDs or DVDs, the drive starts up, spins the CD around (the light is blinking)...but a few seconds later, the drive stops spinning, but the DVD drive light remains on.
    Windows also thinks that the DVD drive is empty.
    I also tried to boot Windows from CD when the computer starts up, but with no success either.
    Any ideas to what's wrong? Is my DVD drive broken?
    Thanks
    Eli

    Hi
    Sorry to said it but in my opinion the drive is dead and only the replacement can helps to get the drive functionality back.
    But be aware that not every drive is supported and can be used with the notebook!
    Take a look into the user manual. Sometimes the compatible drives are listed.
    And its useful to known that all parts can be ordered from the ASP in your country.
    have a nice weekend ;)

  • Noisy CD/DVD drive on my Satellite A60

    Hi I have a Satellite A60 and for some reason the CD/DVD drive makes a terrible noise on some CDs and DVDs but not on others. It sounds as though the CD is rubbing on something but it is not as it now makes this noise with CDs that i have played for ages. Ideas please

    Hi Roger,
    There are two possibilities for this problem :-
    1. The CDs themselves may be slightly distorted with the centre hole slightly off-centre, this makes the disc 'wobble' as it spins and can cause the noise that you describe.
    2. The clamping latch in your CD drive may have worn to the extent that it does not lock the CD in position correctly. This will also cause a wobble in the disc as it spins and the accompanying noise.
    Since you say the noise occurs on discs that you have used previously I assume that the second of the two options is the cause so before taking any further actions I would recommend checking that the CD drive is not loose in its mounting in your notebook.
    Sadly, if all else fails you may need to replace the drive.
    regards,

  • HDD & Optical Drive replacements for Satellite A45-S1202

    Can anyone point me to an alternative replacement drive other than the CMS (100GB-250gb) 5400 RPM 2.5 PATA Universal Notebook Hard Drives?
    Can I get buy from another manufacturer... if so, what drives are recommended?
    I'd like to get more than what came with this particular computer (60gb) but these replacement prices from Toshiba seem quite steep.
    Also, the A45-S1202 came with a DVD reader / CDrW combo. drive.
    Does anyone know of an DVDrw/CDrw (DVD burner) drive replacement that works with this model?
    Any & all help is greatly appreciated!

    Hi!
    You can buy a larger HDD, this is no problem.
    The Satellite A45 is not known to me but I think the largest HDD should be 120GB because the notebook has an IDE interface and ATA-5 standard supports only the LBA 28-bit which means that HDDs larger than 120GB will be not recognized.
    So you need a 2,5 HDD and 120GB max.
    I think you also exchange the drive for a DVD burner but if you want a new one contact a local ASP. They can offer such drives.
    Bye

  • Problem with cd/dvd drive on my Satellite 1900-303

    Hi Every body
    I bought a Satellite 1900-303 in 2003. Recently, it's cd/Dvd drive stopped to work properly. whenever I put a Cd in the driver it assumes that the CD is a audio cd. if the CD is completly Audio cd or partly contained audio files it opens the cd without any problem. but if cd is data CD or software CD after trying along time my system hangs up. I change the settings of the properites of Cd drive in Autoplay section from Music file to other options such as "mixed content". but after inserting CD into the drivers it agains changes automaticaly to the "music file". I showed my notebook an expert in computer system and facility, he tried to reinstall windows XP to solve the problem but it didn't work. Since the driver was not working he used external driver to install windows XP. but the problem has not been solved.
    Is there anybody who knows by accident what I should do to recover it?
    Awaiting helpful advices.
    Vahed

    HI,
    did your friend installed the XP from a MS Cd or from the Toshiba recovery CD?
    At my Toshiba notebook the autoplay section is also setted to Music file and works properly!
    When did this failure occured for the first time? Did you used the MS System recovery option at Start - Accessories - system prog. - System recovery
    Perhaps the backsetting of your system solve the problem!
    You can also check if a firmware update is available for your drive! (If it is a Toshiba drive go to http://www.toshiba-europe.com/storage/index.asp?nav=HOM&page=HOM&frame=home
    Bye Hans

  • New Mac Mini dvd drive replacement

    hey has anyone tried to replace the DVD drive with the Sony BC-5600S bluray drive
    its sata and the right size and its a slot drive, i really want to give it a shot
    the drive can be had online for around $100. anyone tried this or think its possible?

    Well I got a bluray drive in my PC rig I could pull out and connect to my mini and test this out but that's way too much work besides I could just google it and find out which I did:
    It looks like it works in bootcamp just need to make sure to watch out for some stuff
    http://discussions.apple.com/thread.jspa?threadID=1213777&tstart=4
    Someone was even nice enough to write a step-by-step on how to do it:
    http://forum.blu-ray.com/showthread.php?t=84989
    p.s. Since the 9400 video that comes with the 2009 mini is HDCP compliant you should be able to use the DVI adapter it came with and you'll get smooth video since the 9400 was designed for high definition playback!
    Message was edited by: davi angel

  • How to make the CD/DVD drive compatible on Satellite 5000-204

    Hi all,
    I see a thread on replacing CD/DVD drive on this notebook, but it was closed, so i write this post.
    The most of recent unit is "cable select" type and will not be recognized from many Toshiba notebook.
    To solve that you must search a drive for which you can found a firmware update that change it to be "reverse cable select" type, as Nec or Optiarc
    If you buy a drive that can't be recognize (like me) read below.
    I succesfully replaced the DVD-ROM/CD-RW unit with a Pioneer DVR-KD08 DVD writer.
    This unit is a "cable select" type (as most other recent unit) so it can't be recognise by this notebook (and many other Toshiba models). The solution is to connect pin 45 and 47 together on the drive or on the connector adapter (this second solution is simpler).
    If you watch the drive from behind these pins are the second and third from the left on the upper row of pin of the connector.
    In the connector adapter it's simpler to connect these pin (with care) with a solder iron directly on the circuit board.
    Obviously on the circuit board the pins are the second and third from the right.
    After this the unit will recognize ok.

    Hi buddy
    First of all thank you for participation in the forum its always nice to have users who shares the own experience and knowledge.
    Thanks you also for this info how to make the CD/DVD drive compatible.
    But to be honest Im a little bit skeptical because there is a chance that the drive could be damage during this procedure.
    So everyone could do this but only at the own risk!!!
    Usually the compatible drives can be found in the user manual and it would be useful taking a look into the user manual before buying an NOT compatible drive ;)
    Cheers mate

  • DVD drive not writing - Satellite M40X-175

    im having a problem w/ my dvd. i tried to burn my movies, music and my files into a dvdr or cdr, i even tried dvdrw and cdrw but everytime i do it gives an error "d:\ is not accessible incorrect function". but when i try to watch a dvd movie or play my music cd, it does work. it reads. does this mean that my dvd drive can only read and not write?
    [Edited by: admin on 04-Feb-06 20:23]

    Hi there,
    I think Satellite M40X is new enough to have CD writing feature. Seems to me a HW issue but you can try:
    1- clean the empty CD with a dry cloth
    2- blow to the lens and be sure there is no dust
    3- you can uninstall its driver from
    control panel-> system -> hardware -> device manager -> DVD-RAM -> (right click) properties -> driver -> Uninstall -> restart your laptop.
    If they do not help you can contact an Authorised Service Partner of Toshiba. You can find the nearest one from http://217.45.123.236/toshiba/resellerselector.nsf/WebServiceProv?OpenForm

  • DVD Drive Replacement

    So... the situation is I can't use my DVD drive... I don't need any help on how to fix it or what to check since I've already gone through the problem/situation... does anyone know a different way where I can access/use my dvds... such as cd/dvd sharing on a different computer and use it from there... I would like any idea/suggestion... when I say that I mean like EVERYTHING/ANYTHING. I want whatever ideas you have 'cause I don't have any and I really badly want to use my dvds. If all else fails I will buy an external dvd drive or get a dvd replacement...

    See if this helps:
    http://www.bukisa.com/articles/265078_how-to-really-enable-dvd-drive-sharing-on- a-non-air-macbook

  • Re: I need to change the CD/DVD drive in my Satellite Pro P200

    Hi,
    I need to change the DVDRW unit in my Satellite Pro P200, but I'dont know extract the old unit.
    Anybody help me??
    Thanks.
    (Sorry for my english :S ).

    To remove the optical drive module, you need to remove the battery and secondary HDD cover first.
    In the middle of the bottom cover you would find an black screw which secures the CD/DVD drive.
    This screw has to be removed.
    In the secondary HDD bay you will find an bracket.
    Use your hand to push the module bracket and then slide the module from the bay.
    Thats all!
    But once again; be careful and if you have no experience, get in contact with an notebook technician!

  • Tecra A8-EZ8312 DVD Drive Replacement Compatability??

    Hi All..
    Working on a clients Tecra A8-EZ8312 to replace the dead DVD drive.
    For whatever reason Toshiba apparently is hardware specific?
    What's so special about the DVD Drives that the Bios wont recognize a basic DVD replacement Drive?
    Does anyone know what drives are compatable with the Tecra?
    Please don't answer with "Call Toshiba for a replacement drive".  There's a better answer out there.
    Anyone have experience with this?

    Tecra A8-EZ8312 (PTA83U-03202C)
    These two part numbers will for sure work.
       P000480110 & P000463850
    -Jerry

  • Macbook pro unibody dvd drive replacement

    Hi guys, im new here, looking for some advice.
    My dvd drive on my macbook pro 13" unibody is playing up, it makes a odd noise when a disc is inserted, like something plastic is scratching.
    my DVD burner is GS23N SB03, i think i need to replace mine. Ive found a burner on the net but its a GS23N S23NA, does anyone know if i can swap mine for this? and would i need to do something software wise to get it to work?
    many thanks
    Gary

    How new is your MacBook Pro?, if it is a mid 2010 you can bring it to the apple store to have them take a look to it. If this is the case (having a 2010 MBP), you'll most likely be under the 1 year hardware warranty, and if an error is found with your MBP internal DVD drive, Apple will replace it at no cost.

  • Is it possible to install a HD-DVD drive on a Satellite P20

    Hi Everyone
    Is it possible to install a HD-DVD drive on my P20?
    My screen has died, so I'm going to use this machine as a dedicated Media Centre attached to my TV.
    If I can install a HD-DVD drive it would help a lot.
    Regards
    Richard

    Well, I dont believe that you will be able to use a new HD drive or blue ray drive on this notebook but who knows everything depends on the master / slave and c-sel settings.
    Its possible to change such settings on external desktop drives by switching the jumper but something like that is not possible on slim line internal drivesusually the firmware controls this settings on notebooks drives.
    It seems nobody tried upgrade the P20 with such drive that because this is a new technology and at this time you will not find many internal HD or Blue Ray drives on the market.
    However, please come back and report if you have more info about the upgrade.

Maybe you are looking for

  • How do I create a screen saver from a video file?

    I've been trying to search for an answer to this question for 20 minutes, without luck, so I figured the best course of action is to ask the experts. I'm a video editor.  If I cut together a series of clips, of any length, how do I make that movie in

  • Support for CUCM 8.6 in B200 M3

    Is the new B200 M3 a supported platform for deploying Cisco Unified Communication Manager 8.6? The tested reference configuration available at Unified Communication virtualization wiki does not list B200 M3 as a supported platform . Please can anyone

  • Can a PDF be made to by default print with "flip on short edge" set if printed double-sided?

    I'm producing a 4-side, 1-sheet PDF booklet download. Our main target audience is professionals (not necessarily tech-profecient) who will download it and print it on regular office printers. Most modern office printers can print double-sided, so we

  • Not able to open a 2013 plan in mpp 2013

    The error thrown is -Sorry, we were unable to open your project,If it happens again,please contact your administrator. 1.Not able to open from PWA as well. 2.The task bar in mpp shows All offline projects sync to server.closing "Project Name" any Hel

  • Passing parameters dynamically to an FTP adapter

    Hi All We have a requirement to pass the FTP location to the FTP adapter dynamically based on a small check condition. We have used the following XML fragment to pass the ftp location from the assign statement instead of specifying it in the FTP adap