DVD drive stopped writting DVD's on my Satellite 5200-801

Quick question that I hope someone knows the answer to. My DVD drive stopped writting DVD's a while ago (several system reinstalls have proved that it is the drive and not a driver error/conflict) So I got hold of another drive. Fitting was easy however it appears that there is something funny with the ide chain configuration in this laptop. The old drive was set on cable select, however the new drive is set as slave. because of this neither the HD or the DVD drive are accessable.
Does anyone know how to switch dvd drives to cable select to make them work (I tried putting jumpers on the HD to change it between a master and slave but with no joy.)
Thanks in advance
John Walker

Hi John,
Normally, slim design CD/DVD drives are preset by the manufacturer but it is apparently possible to change the setting if you really want to. Please check out the following post :-
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=5946&messageID=20727#20727
HTH

Similar Messages

  • My touchsmart iq500 series PC dvd drive stopped working. how do i fix it

    my touchsmart iq500 series PC dvd drive stopped working. how do i fix it

    Hi Kozi:
                Welcome to HP forum. You mean replacing this page will show you how to excess it and replace it. You still need to order a new one. Ounce you open it and remove it you will then have the part number to order a new one. I choose Touchsmart IQ503jp closeted number listed here in United States to your computers number. http://h1005.www1.hp.com/ewfrf/wc/document?docname=c01498907&cc=us&dlc=en&dlc=en&product=37718827&tm...

  • CD/DVD Drive only reads DVDS Not CD But the computer reads it as a DVD RW Drive!

    CD/DVD Drive only reads DVDS Not CD But the computer reads it as a DVD RW Drive.the drive door say RW DVD+R DL,Compact Disk Rewritable,Ultraspeed,DVD Multi Recorder.I was Wondering if Windows Loaded the wrong Driver?My Laptop S/N IsCNF62612TZ And P/N Is EZ601UA#ABA And The Front Of My Monitor says Hp Pavilion Dv 1000 Entertainment Notebook PC,And The Service Tag Is dv1738od and the Sticker On The Back Of The monitor say Hp Pavilion dv5- 1235dx Entertainment notebook PC.it Cme Factory With Win xp and when i got it the os was corrupted.i tried to reinstall xp but disk said no hard found.so i booted it up with vista ultimate and then downloaded the drivers and stuff from the here.should i had downloaded the 64 bit set as well?

    della wrote:
    My toshiba tecra a2 can only read DVDs. I cant read any type of cd. Ive tried so many things. My laptop is running on xp service pack 3 with a mat**bleep**a DVD RAm UJ 820s. I can burn/run any type of DVD but cant do anything with cds. Ive tried unistalling the drive and that didnt work. Ive uninstalled the IDE drivers and that didnt work. Nothing seams to work. I cant use recovery cds because there CDS. Please Help!!!!!!!!!
    It's probable that the CD 'side' of the combo drive has failed.  That you cannot boot from the recovery CD is pretty much proof of the failure.  

  • My DVD drive not reading DVDs, but can read some DVDs with data on it. Device manager shows no error

    My DVD drive not reading DVDs, but can read some DVDs with data on it. Device manager shows no errors.
    I tried to reinstall driver.
    I downloaded new codec
    I tried Microsoft FIX IT
     Nothing worked.
    Need some help.
    Thank you!!
    Paul

    Hi Albos, This is a known problem. These superdrives die after a while. See the various threads on this site and the internet. I have the same problem with my Imac 20" 2.16 ghz. Just wants to burn and read cd's. Its has to do with the laser. For DVD an CD are two different laser and the one for DVD's has probably died in yours (as it did in mine). I bought an external LG burner and problem solved. (And a lot cheaper than replacing the superdrive)
    Hope this helps you.
    Robert

  • Help, DVD Driver keeps ejecting DVD and requesting a Blank, I insert a Blank and the same message keeps coming up, any suggestions ?

    DVD Driver keeps ejecting DVD and requesting a Blank, I insert a Blank and the same message keeps coming up, any suggestions ?

    Hi
    a. You are using Cheap media as Memorex, NoName etc DVDs - I only use Verbatim
    b. You use a DL-DVD or DVD+/-RW type of media - Old Macs can not use DL-DVDs - I only use DVD-R
    c. Your DVD-burner needs a cleaning - Cleaning DVD without liquid but the brush type
    d. Is there OK free space on Your Start-Up (Macintosh HD) hard disk - I never go less than 25Gb free.
    e. Can You describe the material used to create Your DVD
    - Video Codec/s
    - Photo file formats
    - Audio file formats
    iDVD can not use all but only a few of them - still it tries and then often fails
    Just to start by.
    Yours Bengt W

  • CD/DVD Drive Stopped Working Windows 8

    My CD/DVD Drive is not working. I have no Idea what to do.
    Specs:
    HP Pavilion dv6-6b85ec
    Windows 8
    HP CDDVDW SN-208BB Stopped working Code (19)
    Device SCSI\CdRom&Ven_hp&Prod_CDDVDW_SN-208BB\4&bc34cf3&0&050000 had a problem starting.
    Driver Name: cdrom.inf
    Class GUID: {4D36E965-E325-11CE-BFC1-08002BE10318}
    Service: cdrom
    Lower Filters:
    Upper Filters:
    Problem: 0x13
    Status: 0x0
    Thanks in Advance

    Hi:
    See if running the automated fix it tool works for you.
    http://support.microsoft.com/mats/cd_dvd_drive_problems/
    If the auto fix doesn't work, try the manual fix listed by clicking the "Let Me Fix it Myself" heading.
    http://support.microsoft.com/kb/982116

  • DVD drive stopped working after Mavericks install

    I have a Macbook Pro (late 08 model) that was running Snow Leopard. I recently did a clean install of Mavericks and since then the DVD drive just spins and ejects discs without being able to read them (doesn't seem to matter what I use. Software, games, audio cds, etc..). It was working fine before installing Mavericks and I can still boot from the DVD drive (old snow leopard boot disc) but it won't read any discs once booted into the OS even though the OS is detecting the drive just not the disc when inserted.
    I've tried resetting the NVRAM/PRAM and resetting the SMC as suggested on other forums but like many others with the same issue it didn't help. I also cycled through several drutil commands as suggested to "wake up" the drive but that didn't help any either.
    I'm kind of stumped here guys. I could roll back to Snow Leopard but I've got some software thats dropping support so I'd rather be running Mavericks if I can sort out this DVD drive issue. Clearly its not the drive itself since it worked fine before and I can boot from it. Any ideas?

    Hrm looks like I might of fixed it. I went back after seeing another post about spamming drutil commands to "wake up" the drive and just spammed them about 20 or so times and the drive started working again.
    I'm still very confused as to why it just stopped working within the OS after installing Mavericks (yet I was still able to boot from the DVD just fine). Clearly something is bugged in mavericks. I even came across a post on the apple forums from someone with this issue and it was effecting both his late 08 and early 2013 Macbook Pros.
    I'll keep an eye on my own machine to see if it stops working again but for now it seems my drive is "fixed" go figure.

  • T400 DVD drive stops spinning

    I just had to install my third hard drive in this lemon of a computer. I'm running XP SP3 with all current updates. The bios and dvd drivers that were installed by Thinkvantage Productivity Center are newer than what are listed on the Lenovo updates page. I had no problem with the DVD drive with the old hard drive and its drivers.
    Now I try to reinstall my software from the original CDs and the drive stops spinning within a minute of starting the install. Setup.exe process hangs and System log gets a message from Service Control Manager that reads "The IMAPI CD-Burning COM Service service entered the stopped state." I can start the service manually but it reenters the stopped state every time I try the install from CD again.
    Current bios 7UET89WW (3.19) date
    Model HL-DT-ST RW/DVD MU10N combo CD/DVD driver seen in Device Manager is 5.1.2535.0 date 7/1/2001. No newer driver is found when I choose update from Device Manager or when I use ThinkPad SATA Optical Disc Drive Firmware Update Utility. I have uninstalled the device and let it reinstall on its own and get the same driver.
    However, when I launch Thinkvantage Productivity Center and go to Advanced System Info, under Components/CD-ROM the driver is version 5.1.2600.5512 date 4/13/2008. The drive does not show up under Problem Devices and tests fine.
    Any suggestions how to get my optical drive back to functioning? I've lost 3 days of work from this whole episode.
    tia

    Do you mean test it to see if it will burn data or boot from a Linux distro to look more closely at the drive? I have knoppix on DVD but I could use another computer to burn linux live if that has some particularly good tools.
    I haven't tried to burn anything to a DVD using the drive. I was able to get a few photos copied off a CDROM onto the hard drive before it spun down and imapi stopped itself.
    thanks

  • Equium A210 - After BIOS update the DVD drive stopped working

    hi, since I have updated my BIOS recently, my DVD drive has stopped working on my Equium A210-1AS with Vista 32bit.
    I have tried Microsoft fixme program that does not work, upper and lower registry is not there ether in regedit.
    Has anyone got any solutions to get DVD drive working again?
    Thank you

    The CD/DVD was working fine before I was prompted by Toshiba tempro to update my BIOS, since then my CD/DVD drive doesnt work.
    Have tried fixme from Microsoft that doesnt work, have tried to delete upper/lower filters they are not there, have unistalled CD drive and restarted the drive re-installs and still does not reconise any CD/DVD to boot up and DVD drive disapears some times
    Any suggestions?
    Thanks

  • Got hp pavillion 23@ (prod no H6U2AA#ABL model no 23-f319 and dvd drive stopped working

    have been having an problem with burning cd's and dvd for a while but now it cant even find them to play or rip to my media player ( or add to my phone etc) is there a driver for the dvd rw in this model that i can reload?running windows 8.1 and windows media player (iplayer cant find it either) its like the drive isnt even there. help!thanks in advance.

    I did what you said Vidya.   the drive is listed and i could move it in the boot order.  I could not however, verify anything beyond that.   screenshots below.  What's the prognosis?  is the drive truly good and dead? Thank you again for your help.

  • CD/DVD drive stopped working :(

    I am trying to install iLife '08 on my MacBook but suddenly my CD/DVD drive won't work - it won't even accept the disk at all1!! HELP!!!

    See if anything in this link helps. Trouble shooting slot load drives.

  • Bootcamp woes, unable to boot from USB and DVD drive reads all DVDs blank

    My partner and I are completely unable to install Windows using Bootcamp.  We have tried dozens of solutions on the internet.
    2011 iMac (purchased in by me and my partner 2012) reads all DVDs as blank.  We have (hilariously) another Mac, an MBP, that has the same exact problem.  You'd almost think "Superdrives" eventually just stop working or something.  So obviously we can't install Bootcamp on the iMac using a DVD.
    But what about a USB stick?  Well after modifying the plist file and writing a bootable Windows USB and trying to boot from that, we were greeted with the mysterious and apparently yet-unsolved "no bootable device" error. 
    So our iMac can't boot from USB drives or read DVDs.  We've only owned it for two years.  And this is the second Mac we've owned where the Superdrive has died.  And we don't even use DVDs more than like once a year.
    But anyway, can someone tell me what we're supposed to do if we want to install Windows aside from throwing money away to buy another Superdrive that is probably going to die again in a year?  Maybe a way to make our mac boot from our USB stick?  Something?
    Thanks.

     Should you have another drive with a MBR, use it to rule that issue out. Alternatively create a GPT on the flash drive and try to boot from it.
     What options are there for the usb controller/boot priorities/order/options? Does the laptop recognize the usb flash when already in bios setup? Should there be any form of choosing the device to boot, use that with the flash drive in the socket, then switch it with the external drive.

  • Dvd driver kicks out dvd media -

    Please help me.
    I have a iMac in my home and Power MacG5 in the office.
    I need to get some video editing files to bring in office.
    If I take a data dvds of the editing files from my home to my working place, dvd driver just bring them out of dvd driver.
    No messages!
    I wonder if anybody can help me.

    The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
    The Superdrives are crappy. My mini has had two in less than three years. Thankfully under warranty. Anything can send one over the edge, even an OS upgrade. However, an external USB drive may be cheaper than the internal if you are paying out-of-pocket.

  • DVD drive died - l need to reinstall XP Satellite A105

    Hi everyone,
    My wife went on vacation to Hawaii, and while she was gone, her Satellite A105 (no longer under warranty with a dead DVD drive) started malfunctioning to the point where XP where freeze on boot.
    I tried everything I could but it wouldn't boot.
    So finally I took a USB DVD drive formatted the hard drive with killdisk and tried to use the recovery disc to at least get the unit operational. Problem is the unit will not complete the installation I get the following error:
    Windows cannot find c:/bin/errordialog.exe
    I thought it was the disc so I cleaned it, and still the same thing, since I'm a student, I had access to XP pro from the msdn network so I got a copy, and still the same error.
    I don't have a large enough USB flash drive, and the laptop doesn't have a floppy so I'm stuck with no way to restore the OS... needless to say the wife is not pleased with me!
    I managed to get Linux installed without problem, but my wife wants her laptop back to xp and will probably hate me until I can fix what I have done. PLEASE help!
    TIA

    >feilks, your grammar and sarcasm are as bad as the design of this laptop
    :) you are right about my grammar but notebook design is not so bad.
    Maybe my grammar is bad but you understood me very well. Thats make me happy.
    So let be serious now.
    You have notebook with defective optical disc drive.
    You don't have floppy disc drive.
    If you want to start OS installation from second partition you must somehow start notebook in DOS mode.
    The question is how to do this. Usually you can do this using start disc (FDD) or you can create bootable start CD. The funny thing is: you cannot use any of them.
    The whole time you are writing about USB. Ok I can understand what you want. Probably you want to use external USB connected CD/DVD drive. Right?
    Idea is not bad but this drive will not be recognized for boot-up. Why? You must load DOS driver for external drive. How to do this? Using floppy? You don't have it.
    Can you now understand my joke with gasoline tank?
    BTW: sorry for all my intrusive unintelligent remarks. This is my last posting. I will not disturb you anymore. I just thought we can be realistic here.
    I will follow this thread. Maybe someone else have better solution.
    Good luck!

  • IMac - external DVD drive crashes Aimersoft DVD Ripping program

    I am using Aimersoft DVD ripping software (legal version) to make mp4 files out of DVDs. It works fine on the IMac internal DVD drive. But when I try and use an external DVD drive using FW800/400 conversion cable, Aimersoft program keeps crashing.
    Any thoughts?

    Peter,Welcome to Apple Discussions.
    Here are some alternative choices for playing DVDs.
    If the LaCie drive USB or FW?
    Tiger is serious improvement over 10.1 (although you may need some more RAM) I'm not sure whether it will cure the DVD player issue? If you still have space (9Gb) on your 40Gb drive you could use Mac the Ripper, and then open the VIDEO_TS file in DVD Player.
    mrtotes

Maybe you are looking for

  • Adding Data to the database for SAP Transactions

    Hi I'm new to the whole ABAP. I would like to enquire about adding transaction data in SAP through ABAP but it must be immediate. I know that one can use a BAPI to add data and can rollback if any problems occur. But if no BAPI exists how does one wr

  • Using part of file name in a query

    I am putting together a member directory and I want to be sure that it is best optimized for the search engines (SEO). For this reason, I want to appear to have a unique file for each member. I know that I could just link to a master file and pass th

  • Job_queue-process number on R12?

    We have EBS R12 with VIS demo database installed. I found VIS database 'alert.log" have error messages: +Process J000 died, see its trace file+ +Tue Feb 3 13:24:47 2009+ +kkjcre1p: unable to spawn jobq slave process+ +Tue Feb 3 13:24:47 2009+ +Errors

  • MacBook stolen, now recovered, but the thief changed the name of it on iCloud how do I change it back to my name?

    I would like to know how to change the name of my macbook on the icloud system. I recently had my mac stolen, thankfully i know have it back but the theif managed to change the name of the laptop to "13" and i would like to change it back to my own n

  • How do I paste a copied filename into the save as window?

    I am used to copying filenames into the save as window ... it is more accurate and mroe efficient than typing them.  When I upgraded to CS1 and CS3, I can not do this, either on Snow Leopard or on Win7.  How do I regain the ability to do this?