DVD Drive Will Not Eject

The DVD Drive will not open with the keyboard eject button. The only way to open it is restart it and then put in appleoption+OF then type "eject cd" then type "Mac-boot" but there must be a simpler way to do this with out rebooting it every time you want to open the drive bay. The key board is brand new. I am using a IOgear Miniview III KVM switch. It works when you plug the keyboard in directly into the mac it works fine. Is there a KVM switch driver that is compatible with the Powermac G5 and a PC.

Open the Terminal application in the /Applications/Utilities/ folder and enter "drutil eject" without the quote marks. If you need to use this command often, it can be made into a double-clickable application. To do this, open the Script Editor in the /Applications/AppleScript/ folder, paste the following in:
do shell script "drutil eject"
and save it as an application.
(11147)

Similar Messages

  • My CD/DVD drive will not eject disc

    I have just recently purchased a new Macbook and I had the system for less then a few hours and there was already a problem with the system. The only thing that I have done to it is run the system updates and install the new Leopard OS. Upon completing the installation the disc would not eject from the drive. I have tried all the ways possible to eject it, but every time it makes three clicking noises as if it is trying to eject then the disc just reloads. I have even gone so far as to bring it in for service where they just shipped it to Apple to fix it. They claimed that the bottom of the case was bent and that Apple replaced it therefore fixing the problem. To my dismay when I brought the system back home the problem was still there. Apple wants me to ship it back to them, but I was hoping that there is some unseen solution to my problem, because I'm getting really feed up with this because I have owned this product for almost 3 weeks now and still have not been able to use it. So any help out there would be greatly appreciated.

    Read the os Help menu. 
    Apple Portables: Troubleshooting the slot load optical disc drive  
    Cures for an uncooperative CD/DVD drive

  • CD/DVD drive will not eject disk, it is obstructed, help!

    Hi,
    I formatted my G4 slot loading ibook today, I then went to eject the installation DVD, the drive makes the sounds as if it is ejecting however no disk appears, I took the whole laptop to pieces and looked at the drive, there appears to be a strip of metal that is on a hinge, this can be moved up and down, I think that it might be this that is causing the problem - the disk ejects so far, hits the bar and returns back into the computer. The disk is read by the computer and I am able to eject it so far as the ejection symbol appears and it sounds like it is trying to eject however it is unable to do so. Any help would be much appreciated.
    Thanks in advance!!!
    Jonathan

    Ok I have fixed this myself, after searching for solutions all night and trying many different weird and wacky solutions I found one that worked therefore I thought I would share it to help with anyone else with a similar problem, basically I opened up the firmware window (start up holding - command, option, f, o,) then type "eject cd", the next bit is the most difficult bit whilst the computer is trying to eject rummage about on the left hand side of the cd drive with a credit card like object, (I used a small bit of thick cardboard. I slowed and stop the CD with the card whilst pushing it about after about 2 minutes of this it popped out, after this I used a blank CD to try it again, it got stuck, I repeated this process and it popped out again, after a couple more incidents of it getting stuck I have managed to get 54 ejections in a row without issue. I recommend this solution to anyone as a last resort.

  • CD/DVD Drive Will Not Open

    CD/DVD Drive Will Not Open

    Thank you.  I did find the problem - i'm running Windows 7 through Parallels and i need to Diconnect th CD drive within Windows to let the keyboard eject button work properly.

  • Updated my HP Laptop to Windows 8 and now DVD driver will not work. Help!

    I have a Hp Pavilion dv-7013cl Entertainment PC and everything was working perfectly. I updated to Windows 8 about a month ago and had some problems. I then did a clean install of Windows 8 and now all the bugs are fixed except my DVD drive will not work. 
    I insert a DVD or CD and nothing happens. I go to My Computer and click on it and it just ejects the DVD. I don't know what to do and need my DVD drive.
    Also, I tried to go to device manager and reinstall the driver but that didn't help. 

    Hi Crosby,
    Take a look at this document and try the troubleshooting steps.  Please let me know if it helps to resolve your issues.
    Good luck!
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Cd/dvd drive will not receive a disc, can anyone please help?

    cd/dvd drive will not receive a disc, can anyone please help?

     
    Apple Portables: Troubleshooting the slot load optical disc drive  
    Cures for an uncooperative CD/DVD drive

  • My granddaughter put the Start Up Disk in the drive inadvertently and now the drive will not eject it or start up using the HD.  I have tried all of the suggestions for opening it that appear in the manual.  Help?

    My granddaughter put the Start Up Disk in the drive inadvertently and now the drive will not eject it or start up using the HD.  I have tried all of the suggestions for opening it that appear in the manual.  Help?  It is her computer, a iMac G3 or G4 with superdrive, the one with the ball shaped base.   Thank you.

    It's a tray loading drive, there should be a little hole next to it, just large enough for a paper clip.  Stick the end of the paper clip in it and the tray should open.
    Miriam

  • DVD Drive will not recognize any movie DVD disk in the drive - thus will not play any dvd movies.

    HP G71 449WV dvd drive will not recognize any dvd disc that has a movie on it. Will not play movies, keeps saying to insert disc when there is a disc in there.  It will recognize a dvd data disc or a blank dvd, it just will not recognize any dvd movies.  I've tried the microsoft fix it, downloaded new codecs, using different dvd playback software but none of that works since the drive will not recognize there is even a dvd movie in the drive.  Computer is out of warranty.

    Hello crollinsphoto1, welcome to the HP Forums.
    It appears that you're not able to play movie DVD's in the DVD player in your notebook. I will try to assist you with this.
    I'd recommend starting with this document:
        Resolving DVD and Blu-ray Movie Problems (Windows 7).
    Also, are these purchased DVD's or burnt DVD's?  
    Do the movies play in other sources? (DVD player, other PC)
    Let me know how this goes.
    Thanks.
    I worked on behalf of HP.

  • Satellite A40-151 DVD drive will not play DVDs

    hi my dvd drive will play music cd's but when i try to play a dvd it just makes a beep and nothing happens i tried windvd and it comes on but everything is blurred and still wont play a dvd

    Hello John
    Please dont be mad on me but in your posting there is no question or something just small report that DVD drive will not play DVDs.
    Anyway, if I am remembering well your unit is about 2 years old and has probably DVD-CDRW (Combo) drive. In my opinion there is no much to do. If the drive has problem with original DVDs I presume that there is laser calibrations problem and the device must be replaced.
    I dont know how old is your unit exactly but please check if the warranty is still valid. If yes contact service partner in your country immediately. The drive should be replaced for free. If not you must replaced it on your own. If the drive replacement costs too much I recommend you to use external device (I do it with my old Satellite). On this way I can use newest and very fast super multi DL devices and also create own DVDs.
    You can also try to find already used DVD/CD-RW drive and replace it alone. If you need assistance by replacement please write again.
    Once again, dont be mad on me. I am ready to write my opinion but it is really annoying when someone write just one sentence and nothing more.
    Good luck!

  • My CD/DVD drive will not open

    My CD/DVD drive will not open when I insert any type CD/DVD. The CD/DVD just runs but will not open.

    Try cleaning the lens:
    Use a DVD lens cleaning disk.
    Use a few shots of compressed air in the slot.
    Wrap a fine microfiber cloth (eyeglasses cleaning cloth?) around a business card and gently insert it in the slot.
    If no success, a trip to the genius bar at an Apple store is the best option.
    Ciao.

  • My CD/DVD drive will not accept a disk anymore. Any ideas?

    My CD/DVD drive will not accept disks anymore. Any ideas to make this work short of a very expensive replacement?

    Read the os Help menu. 
    Apple Portables: Troubleshooting the slot load optical disc drive  
    Cures for an uncooperative CD/DVD drive

  • External hard drive will not eject

    Since upgrading to ML my small "my passport" hard drive will not eject. First it gives me the message "the disk couldnt be ejected because Safari is using it and to close Safari and try again". (not sure why safari would be using it..) When I close safari then I get the message " the disk couldnt be eject because another program is using it"
    My only option is to force eject each time.
    Any suggestions?
    Thanks
    Susan
    Mid 2011 15" macbook pro

    Have you updated your "My Passport" software lately, there have been recent updates for Mountain Lion issues: http://community.wdc.com/t5/News-Announcements/bd-p/Announcements
    http://community.wdc.com/t5/News-Announcements/Software-Update-WD-SmartWare-Upda te-1-3-4-x-for-Mac-Users-7-26/td-p/444122

  • Optical drive will not eject

    My Satellite A205-S5814 optical drive will not eject when I press the eject button.
    Before this problem started, the drive would eject, but sometimes a blank screen would immediately appear after the tray ejected and then the computer would restart itself and give me the option of restarting in safe mode.
    Please let me know what may be wrong.
    Thanks.

    Your machine is booting into a Windows partition.
    Apple does not support Windows. They do provide "Boot camp" which allows a knowledgeable person to install XP in a drive partition on a Mac.
    However "boot camp" still in "beta" status and some of the keyboard mapping is not the same as a Windows PC, because it's a Mac, not a PC.
    Mac's come with Mac OS X standard, not Windows. The copy of Windows you got on the machine was likely put there for demonstration purposes, not for sale. If you know how to hack Windows, I'm sure you could bypass the admin password, that's a "store trick" to sell a product with a illegal copy of Windows.
    All Mac's will open the c.d. tray if you reboot holding the mouse button down with a wired keyboard.
    You can also reboot again holding "option key" to select a drive partition to boot from, there should be a Mac OS X and a Windows partition, however it's possible the Mac OS X partition was erased.
    You can stick the Mac OS X installer disk in the c.d. tray, close it and reboot holding "c". It will boot off the disk. There you can select Disk Utility from the Installer menu and Erase w/Zero the internal hard drive. When finished Quit and install Mac OS X Tiger. Your "store copy" of Windows will be gone of course.
    If your unfamiliar with Mac's, Mac OS X, "Boot Camp" with Windows, I suggest you have someone help you. Your in very deep too early in your learning curve.
    You'll really need to learn Mac OS X first, then you can play around with "Boot-Camp" and a legal copy of XP in a drive partition.
    With Mac OS X your machine will be very safe from internet threats, but when your in "Boot Camp" under XP, your just like any Windows PC, completely vulnerable.

  • I have a dvd that will not eject, is there a way of manually getting it out?

    I have a dvd that will not eject, is there a way of manually getting it out?

    Reboot while holding the mouse key (or trackpad) down. Also see this thread.

  • DVD drive will not open

    I have just now set up my new HP Pavilion p7-1110 - the DVD drive will not open.

    Hello Melly,
    I would like to assist you with some information I have found about this issue and give you the in's and out's of your issue. The link below will give you different ways to get your dvd drive open:
    http://www.computerhope.com/issues/ch000214.htm
    >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
    >>>>>>Please click Kudos, if this information has been helpful >>>>>>
    >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

Maybe you are looking for

  • BI : ABAP Rule in transformation

    Hi Experts , I have problem in the ABAP rule. there is an 3x update rule which contains the routine. In the transformation when i create and check the routine  , I am getting the below error : "E:The field "SOURCE_FIELDS-PEINH" cannot be changed. -".

  • Swing EDT

    I'm working on a project where we have problems with deadlock due to incorrectly executing code outside of the EDT. I'm just trying to understand what exactly happens when code is written incorrectly like this. Does the entire code including the pain

  • Making brushes

    Hallo folks, I'm wanting to make my own "Artist's stroke brush." What I was planning to do is get an A4 pieces of paper and apply some thick brush strokes on it with paint, scan them in to Photoshop and I'm guessing I would fill the bacground so that

  • Ios 7 photos

    Hi all, Yesterday I upgraded my iPhone 5 to iOS7.  Now, I see duplicates of all my photos in Collections.  I have also found I can only manually delete one of these photos (the little trash can icon does not display when viewing the 'copy'). These du

  • PO form issue

    Hi all, My reqmt is to change the logo in the standard PO form and display it with the same details.For this what should I do? What is the standard PO form? Is it in script or smartform? Should I need to take a Z copy and then make changes in the pri