DVD drive won't even read Disc... options?

It seems my Superdrive is on it's last leg and now it can't read anything... Do I have any options? I've read people doing an install through firewire and target disk, but that won't work apparently (due to the iMac being Intel and Powerbook PPC).
The iMac is all good, but can I get an installation to my Powerbook sans the Superdrive? Maybe using my 5G iPod as a disk (though it too has been firewire crippled, correct)?
I really want to get Leopard on this 1.33Ghz to breath some new life into it... help!

Target Disk Mode install will work as long as the PowerBook meets Leopard's requirements. It doesn't matter if the iMac is Intel. Put the DVD in the iMac and boot it in Target Disk Mode. Connect it to the PowerBook and boot the PowerBook with Option pressed. When the cursor changes to an arrow, select the DVD and click the straight right pointing arrow.

Similar Messages

Cd/dvd drive won't burn a disc,although it will read a cd

i have a compaq cq62 with windows 7 home premium with the cd/dvd drive won't burn a disc,although it will read a cd

Hi,
First, try the automated fixit from Microsoft on the link below.
Windows 7
Check if the drive will now burn a disc.
If it still doesn't work, click the Start Menu, open All Programs, open Accessories, right click the Command Prompt and select 'Run as Administrator'. In to the prompt type the following command and hit enter.
sfc /scannow ( note that there is a space between sfc and the / )
Let the process complete, then type exit and hit enter.
Next, click the Start Menu, open the Control Panel and click on Device Manager. Next click to open DVD/CD-ROM Drives. Right click the drive and select uninstall. Do not delete drivers if asked. When the device has uninstalled click on the 'Scan for Hardware Changes' icon ( usually just below Help on the toolbar ). Let windows reinstall the drive and see if it is now able to burn a disc.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

MacBook CD/DVD drive won't read disc

I have a Apple MacBook MC207LL. I have run into a major problem. My CD/DVD drive won't recogonize a disc when it's inserted (I have to force eject it). Disk utility shows that there is a disc present in the CD/DVD drive.
My major issue is that I erased my partition so I can have a clean install of my laptop. Now I can't reinstall the OS because it won't read the disc or a USB.
Is there a way to use Terminal to force it to read my data on the disc?
Otherwise I am stuck with an empty computer that I will never be able to use I have done research on this and nobody has run into this exact problem as me. If someone can take their time to help me out that would be greatly appreciated.

I am having the same problem, but now mine wont even notice that the disc is there! I wouldsay take it to the genius bar.

CD/DVD drive won't read media

I just bought a Power Mac G4 Quicksilver from a friend (I'm new to this) and she said that the CD/DVD drive sometimes has problems reading discs. She also said that a friend of hers told her that all it needed was a new "drive reader" which would only be about $20.
So far it hasn't been able to read anything for me. When I insert a disc it makes some clicking sounds as if it's trying to read it but then after about a minute it just ejects it without any error message. I'd rather not replace it if I can avoid it.
Any suggestions on how to fix this? Is there such thing as a "drive reader"? What drive should I get if I do need to replace it?
Thanks.
Jeff

Jeff, welcome to Apple Discussions & the Mac Community.
The drive could have failed. It could also be dust on the read lens inside the drive. You can get a CD/DVD drive cleaner CD at most computer stores.
There are several types of drives that you could replace the current one with:
1) one that is read only (ie. drive reader)
2) one that will read CDs & DVDs and burn CDs
3) one that will read CDs & DVDs and burn CDs & DVDs
#1 is cheapest & doesn't require any special software
#2 & #3 are more expensive & may/will require special software
 Cheers, Tom

EXPERTS!! CD/DVD Drive Won't Recognize Discs

Hello Experts,
My CD/DVD drive is unable to read discs. This has happened before while the computer was under warranty and the tech was able to remotely fix it, but it has started doing it again.
I figured my drive had gone bad, so I have bought a new drive and installed it, but the same problem. I have also uninstalled and reinstalled the drivers as well. No new software has been added or removed either.
HP Pavilion Notebook dv7-2185dx
The drive is a TSSTcorp CDDVDW TS-L633M ATA Device
Thanks in advance for the help!
Brian

Also have tried clearing the upper/lower filters in the registry, as well as system restore and microsoft fix it.
You can hear the drive reading, or attempting to read the disc, but it says there is no disc present.

My dvd drive won't open so I can insert a disc. It has opened in the past by pushing the button on my mac

I can't insert any dvd's because my dvd drive won't open when I push the open key. It has always worked in the past. Any suggestions on how to fix this?

It's possible there is a CD/DVD in the drive that's stuck. Open Disk Utility in Applications/Utilities. Do you see a CD/DVD in the drive? Try ejecting using unmount.
If that fails, restart and hold down the mouse button whe restarting.
Other links:
Kappy's Five ways to eject a stuck CD or DVD from the optical drive https://discussions.apple.com/thread/4795807
Ds store's suggestion: Reboot the computer holding the option key down, wait for the boot drive options to appear, then press the eject key on the keyboard. When it's out, then select your boot drive and click the arrow key to boot up.
http://guides.macrumors.com/Force_Eject_a_Stuck_CD_or_DVD
Hope this helps!

G4 DVD drive won't recognize OS 10.4 upgrade disc

I have a a PowerMac G4 (AGP graphics) with a CPU type PowerPC G4 (2.9). I have a upgrade disc for OS 10.4. When I load it into my Quantam Fireballlp LM27.3 DVD drive, the drive won't recognize the disc. It attempts to read it and then ejects it. I have an external USB 2.0 DVD RW burner plugged into a USB 1.0 port, and it recognizes the disc, but I can't select it as the startup disc.
How do I get my system to read the upgrade disc so I can upgrade to OS 10.4? I've run a lens cleaner several times with no change.
Thanks!

Hi-
Well, if you know someone who has a Mac, or, if you have another machine, try the disc in another machine. There is a possibility that the disc itself is bad. I would consider this a strong possibility, since the drive recognizes other DVD's, and the Panther install disc.
If the disc tests good in another machine, then you will need to consider replacing the drive for a newer model. A new combo drive is only about $30-$40. The Pioneer DVR-112 would be a good consideration.
http://eshop.macsales.com/item/Pioneer/DVR112DBK/
As for the "helpful" not working, there seems to be a problem within the system (known by the hosts, yet allowed to continue....). For now, I will gladly accept your thanks! (and, you're welcome!)

HT1338 DVD drive won't read or burn

DVD drive won't read after upgrade to mountain lion install

do you have the win 7 cd handy, try to boot into the discs and see whether that works, this will tell you whether that is software or hardware problem. Such failures do occur, due to ageing of laser.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

I have an older IMac 5. I installed snow Leopard on. Now my DVD drive is not working. Discs go in but it dosn't boot up or show in finder. Then disc won't eject unless i shut down and restart. HELP !

I have an older IMac 5. I installed snow Leopard on. Now my DVD drive is not working. Discs go in but it dosn't boot up or show in finder. Then disc won't eject unless i shut down and restart. HELP !

Snow Leopard cannot run on a PPC G5 Mac as it requires an Intel processor. Please confirm what Mac you have.

Imac dvd drive won't accept disks

My iMac's dvd drive won't let me insert any disks. It feels like there's something blocking the way in. The eject button on my keyboard doesn't seem to be working either – usually the dvd drive makes an 'ejecting sound' when the button is pushed, even when there's no disk. I've also tried some disk ejecting tricks found in this community. The dvd drive seems to be responding to nothing...

Try this:
Repairing the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
No guarantee this will work but it's a start.

Installed itunes 6 and now CD/DVD drive won't work at all

I just bought a new ipod and installed the software and now my CD/DVD drive won't work at all. Here is my info: Could someone please help!!!
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Dell Computer Corporation Inspiron 5160
iTunes 6.0.4.2
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: ASAPIW2K (6.0.2.0),
UpperFilters: GEARAspiWDM (2.0.4.3),
Video Driver: NVIDIA GeForce FX Go5200 \GeForce FX Go5200
IDE\DiskFUJITSUMHT2080AH_______________________006C___, Bus Type ATA, Bus Address [0,0]
IDE\CdRomSONYDVD+-RW_DW-D56A____________________PDS7___, Bus Type ATA, Bus Address [0,0]
SCSI\CdRomROXIO__DVD-ROM_EMULATOR___, Bus Type SCSI, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
D: SONY DVD+-RW DW-D56A, Rev PDS7
Drive is empty.
E: ROXIO DVD-ROM EMULATOR, Rev
Drive is empty.
If anyone has a solution for this stupid problem that would be great.
Thanks

Yes, I suspect that it's the virtual drive emulator software you have there. I know nothing about that software and it doesn't look like the Roxio support page even mentions it, so it's probably software old enough that they're not supporting it anymore.
To uninstall any software, I would start with the "Add and Remove Programs" Control Panel. Uninstall it there, and then use the Microsoft Installer Cleanup Utility —
http://support.microsoft.com/default.aspx?kbid=290301
Download and install that. Run it and find the drive emulator software on the list and remove it there. And reboot and see if that has successfully removed it.
There is a work around that if we just remove the iTunes CD driver, you'll probably get your drive back, but you'll only be able to rip CDs, you won't be able to burn them without the iTunes CD driver installed. You do have some Pinnacle CD burning software installed. Are you currently using that or is that leftover cruft as well?

External dvd drive won't work on USB macBook air

External dvd drive won't work on my macBook air usb port. It works on older versions of air and iMac.
Any ideas. Tried the left shift, control, option and power button sumultaniously, but did not work.

I know that no one has replied yet, but figured out the issue. I called Applecare and they couldn't figure it out, so sent me to a genuis at the Apple store. They too couldn't figure it out and told me that it was a firmware issue with the Toshiba dvd external drive. When I got home, I thought I would try one more thing. I hooked it up to a powered hub and it works perfectly. I'm not sure why no one else thought of it, but glad that I did.

TX2 DVD Drive Won't Open

I bought the Tx2 2 days ago. I had the keyboard stop working on me and was able to get that fixed. Now the dvd drive won't open. When I first boot up the LED light flashes, letting me know that there is power to it but whenever I push the open button, nothing happens. I have tried ejecting it from the drive icon inside of windows explorer and media player.
I bought this so I could watch movies during my 2 1/2 hour commute so if I can't get this drive open I will be returning it.

Is there a small paperclip-sized hole on the front of, or next to, the drive? If so, you can put a paperclip in there to manually eject the disc drive.
Is the drive showing up in the "Computer" explorer window?
Also, try going to Device Manager and see if the drive is listed or in an error state.
"A riot is the language of the unheard." - Dr. Martin Luther King Jr.

HT5639 after The Boot Camp for Windows 8? DVD Drive Not Recognized or Reading CD/DVD

after i made The Boot Camp Setup for running Microsoft Windows 8? DVD Drive Not Recognized or Reading CD/DVD

thanks for the response
1. Yeah I thought that's a mandatory thing because i need to be able to control the brightness with my keyboard, updated graphics card, boot camp control panel, etc
2. No there's no enable for this because Windows 8 recognizes it as a "disconnected device" and asks me to reconnect the dvd drive to the machine (which it obviously already is).
3. Ive tried those before, also even editing the registry but it didnt work.
It's weird because it never happened before on Snow Leopard » Lion bootcamp driver updates. Just in Mountain Lion

My DVD drive won't open when I click the button

Hi there
I'm hoping someone can help me.
My DVD drive won't open when I click the button.
I've tried clicking on eject on the DVD Drive icon in My Computers and it comes up with an error message.
I think I deleted cookies the other day. Could that have anything to do with the problem?
Any help would be greatly appreciated as I really don't want to send my laptop away to a technician.

Hi
Try to open the CD/DVD drive manually.
Near the eject button you will find a small hole.
You could use a small object like staple and could push it carefully into this hole.
Usually this should helps to open the drive manually.

DVD drive won't even read Disc... options?

Similar Messages

Maybe you are looking for