DVD drive won't play

Edit: Apparently it's not possible to list the maker of my DVD drive without being bleeped. I have edited the subject title.
I have a Satellite A105-S4274 with a Mat**bleep**a DVD-RAM UJ-841S ATA drive. I've never used it for burning any media, only watching the occasional DVD. But now it won't play any DVD, nor will it play any music CDs. I've also tried using it to read CDs and DVDs I've burned on my desktop PC, but the drive won't read them, either.
The DVD drive is recognized in the Vista device manager, which says it's working properly. It also shows up on Windows Explorer. However, when I put a disk in the drive, the light on the drive flashes as normal, but then stays on and nothing happens. When I use Windows Explorer to attempt to look at what's on the disk, it shows nothing.
Is there any way to fix this problem? If not, what drive will work as a replacement?
Solved!
Go to Solution.

It sounds like a drive failure. Replacement drives are problematic since Toshiba doesn't publish a list of compatible drives and it can be tricky getting a replacement. There have been cases where even the identical make and model drive fails to work because of firmware differences. The easiest, but not the cheapest solution would be to buy a replacement from a Toshiba Authorized Service Provider. Those usually run around $400. You can also use Google and search the net for info. www.sparepartswarehouse.com sells all manner of laptop parts and would be a good place to start.

Similar Messages

DVD drive won't play brand new store bought DVDs - makes grinding noise

I just bought my iMac last September and it was going great until the last month or so. First it started making noises when I inserted a new DVD and was slow to start, but it still worked. Then it started taking longer and sometimes rejecting the disc once - I'd re-insert and it'd be fine. Later it started rejecting more than once before it would play and now it seems to have stopped altogether and generally won't play any DVDs. I do watch a lot of movies, but even with a little more than average use it still seems a bit ridiculous that the drive would die or burn out in less than one year, right?? Has anyone else had this issue and/or resolved this issue? I'm new to Macs and haven't had to call the service people before but have heard others say they've had issues with the store service - should I call AppleCare instead? Any suggestions/tips/help would be appreciated. Thx.

It happens. Just be lucky it's still under warranty and give Apple Care a call.
George

DVD Player won't play some DVDs

My DVD Player won't play certain DVDs. Presumably all commercial DVDs should be playable in the software. Fox discs are a problem. I can get Player to turn on, but after the menu, the screen flashes a reading error, from which it could not recover. Yesterday I tried to play a Paramount disc, and nothing happened. The computer didn't even acknowledge that there was a disc in the tray. A Wolfe Video wouldn't read at first (I got a dialogue box that the disc was blank) but I put it in again and that time it played.
Also, on a side note, I would like future editions of DVD Player to add the feature of allowing the viewer the ability to go backwards a frame at a time, as well as forwards.

Hi, Doug.
This is starting to sound like a different problem. Your original report seemed to apply only to specific DVDs. Now it's with all DVDs. Before we get into how to reinstall DVD player, let's try a few other things that are more likely troublemakers with DVD Player.
1. As a general check, run the procedure specified in my "Resolving Disk, Permission, and Cache Corruption" FAQ. Perform the steps therein in the order specified.
2. Reset DVD Player. Peform all of the following steps before attempting to launch DVD Player again:2.1. Trash the com.apple.DVDPlayer.plist file in your Home > Library > Preferences folder. This file is the preferences file for DVD Player.
2.2. Using Get Info, make sure you are the Owner and have Access of Read & Write on the following folders on your account:• Home > Library > Application Support.
• Home > Library > Application Support > DVD Player.
• Home > Library > Application Support > DVD Player > Settings.If not, correct the permissions accordingly using the Owner and Access pop-up menus in the Details sub-panel of the Ownership & Permissions panel of the folders' Get Info windows.
2.3. Trash the contents of your Home > Library > Application Support > DVD Player > Settings folder.3. If none of the above sorts it out, let's see what Console can tell us: After the problem occurs, make note of the time, then immediately check the ends of these Console logs for clues that may have been logged when the problem occurred.
4. Note that none of the above rules out the possibility that your optical drive has become defective.4.1. Can you burn DVDs, e.g. even data DVDs from Finder?
4.2. See if the freeware VLC Media Player (nee VideoLan Client) can play the DVDs.Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

My 10.6.8 macbook pro's DVD player won't play a movie from Netflix. The DVD does play on a 10.5 mb pro. So DVD is ok. Message says "not permitted" when I click play. Is there a compatibility issue? Or something else?

My 10.6.8 macbook pro's DVD player won't play a movie from Netflix. The DVD does play on a 10.5 mb pro. So DVD is ok. Message says "not permitted" when I click play. Is there a compatibility issue? Or something else?

Hello:
This is not an area I have much experience in......I rarely insert DVDs and I have never had a similar problem.
When the DVD is in the drive (and DVD players is open) click on File>get disk info.
Barry

Combo drive won't play CD's

after recently (seemingly) ironing out the bugs in iTunes 7.0.1, my combo drive won't play commercial CD's. MP3 CD's play in iTunes just fine and it will burn CD's. but both the finder (copying) and iTunes freeze when i try to play commercial CD's. when trying to copy aiff files to harddrive as a workaround, i get the following error message:
"some data on (in the file) is unreadable or unwritable. error (-34)"
i suspect the problem is with the drive itself as an external CD-DVD firewire writer has no problem and works with iTunes just fine.
is the combo drive dying? is there a software patch somewhere? is the problem caused by iTunes? quicktime?
PowerBook G4 Mac OS X (10.3.9)

As in the posting of Oct 3 from regmetc, following
the install of iTunes 7.0.2 and QT 7.1.3, my combo
drive won't play most commercial CD's. Most curious
is that I have so far found ONE commercial CD in my
library that plays just fine, but haven't had the
time to check all of the 200+ cds I own. It will burn
CD's and read DVDs. but iTunes will freeze when I try
to play commercial a CD.
An external CD firewire writer has no problem and
works with iTunes just fine.
Booting from an external backup drive with an earlier
cloned OSX 10.4.6 and iTunes 6.0.2 did not cure the
problem.
Hardware test shows no hardware problems.
as a followup ... did extensive hardware testing and software re-loading and found that there was nothing wrong with the hardware ... everything worked just fine if I returned to OS 10.3.9 or earlier and itunes 6 or earlier. I found I could run OS 10.4.0 through 10.4.8 and have the cd drive work fine if I stayed at itunes 4, but once I changed up to 6 or 7 I lost the drives ability to read music cds. Data cds are not affected and DVDs play just fine.
I am now assuming that there is some code change whereas OS 10.4 and itunes 6 or 7 doesn't provide the proper driver for the cd combo drive. I have a cd rom drive in another laptop that is not affected and any external cd drive seems to be fine. It would be curious to know if a different enternal drive like a superdrive would work.

My dvd drive won't open so I can insert a disc. It has opened in the past by pushing the button on my mac

I can't insert any dvd's because my dvd drive won't open when I push the open key. It has always worked in the past. Any suggestions on how to fix this?

It's possible there is a CD/DVD in the drive that's stuck. Open Disk Utility in Applications/Utilities. Do you see a CD/DVD in the drive? Try ejecting using unmount.
If that fails, restart and hold down the mouse button whe restarting.
Other links:
Kappy's Five ways to eject a stuck CD or DVD from the optical drive https://discussions.apple.com/thread/4795807
Ds store's suggestion: Reboot the computer holding the option key down, wait for the boot drive options to appear, then press the eject key on the keyboard. When it's out, then select your boot drive and click the arrow key to boot up.
http://guides.macrumors.com/Force_Eject_a_Stuck_CD_or_DVD
Hope this helps!

Installed itunes 6 and now CD/DVD drive won't work at all

I just bought a new ipod and installed the software and now my CD/DVD drive won't work at all. Here is my info: Could someone please help!!!
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Dell Computer Corporation Inspiron 5160
iTunes 6.0.4.2
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: ASAPIW2K (6.0.2.0),
UpperFilters: GEARAspiWDM (2.0.4.3),
Video Driver: NVIDIA GeForce FX Go5200 \GeForce FX Go5200
IDE\DiskFUJITSUMHT2080AH_______________________006C___, Bus Type ATA, Bus Address [0,0]
IDE\CdRomSONYDVD+-RW_DW-D56A____________________PDS7___, Bus Type ATA, Bus Address [0,0]
SCSI\CdRomROXIO__DVD-ROM_EMULATOR___, Bus Type SCSI, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
D: SONY DVD+-RW DW-D56A, Rev PDS7
Drive is empty.
E: ROXIO DVD-ROM EMULATOR, Rev
Drive is empty.
If anyone has a solution for this stupid problem that would be great.
Thanks

Yes, I suspect that it's the virtual drive emulator software you have there. I know nothing about that software and it doesn't look like the Roxio support page even mentions it, so it's probably software old enough that they're not supporting it anymore.
To uninstall any software, I would start with the "Add and Remove Programs" Control Panel. Uninstall it there, and then use the Microsoft Installer Cleanup Utility —
http://support.microsoft.com/default.aspx?kbid=290301
Download and install that. Run it and find the drive emulator software on the list and remove it there. And reboot and see if that has successfully removed it.
There is a work around that if we just remove the iTunes CD driver, you'll probably get your drive back, but you'll only be able to rip CDs, you won't be able to burn them without the iTunes CD driver installed. You do have some Pinnacle CD burning software installed. Are you currently using that or is that leftover cruft as well?

E440 CD/DVD Drive Won't Open

Hello. I bought a Thinkpad Edge E440 and it came yesterday. However the CD/DVD Drive won't open. If it do the paperclip trick, it will, but when I press the button it just makes a few noises and then nothing, if I right click the drive and press eject, same result. Any suggestions please?

reliablepctechs wrote:
obtain a paper clip, straighten it out and insert it in the small hole found on the bezel of the cdrom drive. Doing so mechanically releases the drive...
take reasonable care in doing so....insert it about an inch or so
I saw that you posted the suggested paper clip trick as a solution, but it does not work for me. my machine is a new (2011) hp. i do not think it matters that it is a bluray drive. any other hints would be hugely appreciated

Cd/dvd drive won't burn a disc,although it will read a cd

i have a compaq cq62 with windows 7 home premium with the cd/dvd drive won't burn a disc,although it will read a cd

Hi,
First, try the automated fixit from Microsoft on the link below.
Windows 7
Check if the drive will now burn a disc.
If it still doesn't work, click the Start Menu, open All Programs, open Accessories, right click the Command Prompt and select 'Run as Administrator'. In to the prompt type the following command and hit enter.
sfc /scannow ( note that there is a space between sfc and the / )
Let the process complete, then type exit and hit enter.
Next, click the Start Menu, open the Control Panel and click on Device Manager. Next click to open DVD/CD-ROM Drives. Right click the drive and select uninstall. Do not delete drivers if asked. When the device has uninstalled click on the 'Scan for Hardware Changes' icon ( usually just below Help on the toolbar ). Let windows reinstall the drive and see if it is now able to burn a disc.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Imac dvd drive won't accept disks

My iMac's dvd drive won't let me insert any disks. It feels like there's something blocking the way in. The eject button on my keyboard doesn't seem to be working either – usually the dvd drive makes an 'ejecting sound' when the button is pushed, even when there's no disk. I've also tried some disk ejecting tricks found in this community. The dvd drive seems to be responding to nothing...

Try this:
Repairing the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
No guarantee this will work but it's a start.

MacBook CD/DVD drive won't read disc

I have a Apple MacBook MC207LL. I have run into a major problem. My CD/DVD drive won't recogonize a disc when it's inserted (I have to force eject it). Disk utility shows that there is a disc present in the CD/DVD drive.
My major issue is that I erased my partition so I can have a clean install of my laptop. Now I can't reinstall the OS because it won't read the disc or a USB.
Is there a way to use Terminal to force it to read my data on the disc?
Otherwise I am stuck with an empty computer that I will never be able to use I have done research on this and nobody has run into this exact problem as me. If someone can take their time to help me out that would be greatly appreciated.

I am having the same problem, but now mine wont even notice that the disc is there! I wouldsay take it to the genius bar.

HT1338 DVD drive won't read or burn

DVD drive won't read after upgrade to mountain lion install

do you have the win 7 cd handy, try to boot into the discs and see whether that works, this will tell you whether that is software or hardware problem. Such failures do occur, due to ageing of laser.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Satellite A40-151 DVD drive will not play DVDs

hi my dvd drive will play music cd's but when i try to play a dvd it just makes a beep and nothing happens i tried windvd and it comes on but everything is blurred and still wont play a dvd

Hello John
Please dont be mad on me but in your posting there is no question or something just small report that DVD drive will not play DVDs.
Anyway, if I am remembering well your unit is about 2 years old and has probably DVD-CDRW (Combo) drive. In my opinion there is no much to do. If the drive has problem with original DVDs I presume that there is laser calibrations problem and the device must be replaced.
I dont know how old is your unit exactly but please check if the warranty is still valid. If yes contact service partner in your country immediately. The drive should be replaced for free. If not you must replaced it on your own. If the drive replacement costs too much I recommend you to use external device (I do it with my old Satellite). On this way I can use newest and very fast super multi DL devices and also create own DVDs.
You can also try to find already used DVD/CD-RW drive and replace it alone. If you need assistance by replacement please write again.
Once again, dont be mad on me. I am ready to write my opinion but it is really annoying when someone write just one sentence and nothing more.
Good luck!

External dvd drive won't work on USB macBook air

External dvd drive won't work on my macBook air usb port. It works on older versions of air and iMac.
Any ideas. Tried the left shift, control, option and power button sumultaniously, but did not work.

I know that no one has replied yet, but figured out the issue. I called Applecare and they couldn't figure it out, so sent me to a genuis at the Apple store. They too couldn't figure it out and told me that it was a firmware issue with the Toshiba dvd external drive. When I got home, I thought I would try one more thing. I hooked it up to a powered hub and it works perfectly. I'm not sure why no one else thought of it, but glad that I did.

My DVD drive won't open when I click the button

Hi there
I'm hoping someone can help me.
My DVD drive won't open when I click the button.
I've tried clicking on eject on the DVD Drive icon in My Computers and it comes up with an error message.
I think I deleted cookies the other day. Could that have anything to do with the problem?
Any help would be greatly appreciated as I really don't want to send my laptop away to a technician.

Hi
Try to open the CD/DVD drive manually.
Near the eject button you will find a small hole.
You could use a small object like staple and could push it carefully into this hole.
Usually this should helps to open the drive manually.

DVD drive won't play

Similar Messages

Maybe you are looking for