Dvd drive won't read/ejects dvds at a whim

Hi all,
My macbook dvd drive seems to not wish to play certain dvds- only a few though... when this occurs, it just tends to spit them back out at me.
It's not a problem with the dvds, as they play on my dvd player, just not on the laptop...
any ideas?

Hi Peeps
I had exactly the same problem with my Macbook, again from the UK. Really weird though as would intermittantly read DVD film's which worked fine previously.
Well.... Took it to my local Apple store and saw a genius and anyway they replaced the super drive and logic board (surprised about the logic board!).
But just got it back today and the DVD drive is completely fubard so is being returned tomorrow to get this sorted!
Moral of the story, sounds like a drive or board problem. Will keep you updated when I get mine back
Macbook 2Ghz, 512Mb, 60Gb, Superdrive Mac OS X (10.4.7)

Similar Messages

After SL-DVD drive won't read any dvd-ejects it after spinning some time

Yesterday I bought the SnowLeopard DVD in order to do the update of my Mac OS.
Right after inserting the DVD in the drive (MATSHITA CD-RW CW-8221) it started to have some problems with reading the DVD.
The Drive has stopped recognizing/reading any blank DVD media (and many recorded DVDs, including movie discs). It spins for some time with a noise and then ejects it out. The same media works fine in my Toshiba laptop.
I tried several times, but the drive isn't able to read the DVD and now has the same problem with other CD-Roms and DVD.
I am very suprised (and angry) about it, especially because I hardly use the drive.
As a lot of other people are having the same problem, there seems to be a structural problem with the drive and I think that Apple has to clearify if they are planning to do something and what.

Mine MacBook seems to be doing almost the same thing. The SL disk spins a bit then is ejected. It does the same thing with my first SL disk and the one Amazon sent as a replacement. I had the same trouble with the 10.5 Install disk purchased retail. Apple sent a replacement Non-retail disk and it worked. I can burn DVDs and read DVDs I've burned.

Satellite M40-145: CD/DVD drive won't read some DVDs

Hello!
I own a Satellite M40-145 purchased just over one year ago; the DVD driver worked perfectly until three days ago, but today I discovered something... peculiar. It still reads commercial DVDs and burned DVD+R, but apparently it doesn't read burned DVD-Rs anymore. I have tried with different DVD-Rs I burned through the same DVD player, with no success; trying to access the DVD yields a "insert disk in D: drive" message.
In this case, I'm talking about movies on DVDs. Please tell me there's a way to solve this without sending the computer to customer service...
I'd hate to think it broke down just days after the expiration date of the warranty.

Hi
Well, you can try to remove the drive form the device manger.
After new reboot the drive should be recognized again. Check then if its possible to read the DVD-R CD.
But the issue sounds as a lens calibration error. If you use different media the lens must be calibrated again. But if this procedure fails, the drive is not able to read or write the DVD for example.
Unfortunately, in such cases only the drive replacement will solve this issue.

DVD Drive won't read blank DVD+R or DVD-R media

It just, ehm, won't. I've tried both, and I've never had any problems reading DVDs or writing CDs, though this is the first time I've tried to write to a DVD. When either disc is in the drive, the computer acts as if it's simply not there--Explorer, Nero, and everything else all act the same. Help would be greatly appreciated, because this DVD is fairly important...
I'd be more than happy to answer any questions about the problem, if you have any.
Thanks!
ThinkPad T61p [June 2008]: 2.5Ghz Penryn Core 2 Duo, 4GB DDR2 RAM, NVidia Quadro FX 570m 256MB, 160GB 7200RPM Fujitsu HDD, 1920x1200 WUXGA Matte LCD, Windows 7 RC1

it would be helpful if you could post which T-Series system you have, even better post the Type and Model Number this will help members to help you. If it ends in CTO please provide some details about it. Please do NOT post your s/n.
Thanks
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

HT1338 DVD drive won't read or burn

DVD drive won't read after upgrade to mountain lion install

do you have the win 7 cd handy, try to boot into the discs and see whether that works, this will tell you whether that is software or hardware problem. Such failures do occur, due to ageing of laser.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

HT2801 My DVD drive is not reading any DVD

My iMac's DVD drive is not reading any DVD. Whenever I am inserting any DVD, The DVD icon is not appearing and the DVD is ejected out after sometime. I have also tried the troubleshooting steps given in the apple support site by restting the SMC but my iMac still does not read any DVD. What do I do now? Somebody help me.

Could try purchasing a commercially available, retail dry brush CD/DVD lens cleaning system disc. These can sometimes revive a malfunctioning optical disc drive.

Drive won't read any dvd ejects it automatically

My drive Won't read any kind of DVDs, it keeps ejecting automatically after spinning for a while. it's been going on for a while now. please help!!!!!

You can try resetting the SMC Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
and PRAM How to Reset NVRAM on your Mac - Apple Support
If that doesn't help you can try a cleaning disc or a quick shot of canned air. It's likely though that your drive has failed, it' not all that uncommon. It that is the case you can either replace it or have it replaced but it's far cheaper just to buy a usb external drive....just not Apples because it won't work with macs with a built in drive working or not. .

MacBook CD/DVD drive won't read disc

I have a Apple MacBook MC207LL. I have run into a major problem. My CD/DVD drive won't recogonize a disc when it's inserted (I have to force eject it). Disk utility shows that there is a disc present in the CD/DVD drive.
My major issue is that I erased my partition so I can have a clean install of my laptop. Now I can't reinstall the OS because it won't read the disc or a USB.
Is there a way to use Terminal to force it to read my data on the disc?
Otherwise I am stuck with an empty computer that I will never be able to use I have done research on this and nobody has run into this exact problem as me. If someone can take their time to help me out that would be greatly appreciated.

I am having the same problem, but now mine wont even notice that the disc is there! I wouldsay take it to the genius bar.

DVD drive won't read disks at boot

I have a Paviliton DV6-2113sa running Win7 HP 64bit.
I removed Acronis True Image and when I rebooted I got a BSOD at the point when the coloured balls should merge into one.
I thought OK, put the system repair disk into the DVD drive and boot up, but the drive is failing to read any recovery dosks. I think the drive has packed up as I haven't used it for some time.
Can I use any replacement drive in this model or must I get the same one again?
The drive light flickers as though it is reading data but it doesn't 'spool up' to speed and I don't get the 'press any key to load from DVD'.
The BSODs are a seperate issue which I think running a system repair will fix but I can't as the drive won't read data.
Is it possible to put the repair disk files onto a 4gb USB stick and if so, how do I do it?
Thanks.

Hi Peeps
I had exactly the same problem with my Macbook, again from the UK. Really weird though as would intermittantly read DVD film's which worked fine previously.
Well.... Took it to my local Apple store and saw a genius and anyway they replaced the super drive and logic board (surprised about the logic board!).
But just got it back today and the DVD drive is completely fubard so is being returned tomorrow to get this sorted!
Moral of the story, sounds like a drive or board problem. Will keep you updated when I get mine back
Macbook 2Ghz, 512Mb, 60Gb, Superdrive Mac OS X (10.4.7)

Hp pavilion cd/DVD drive won't read discs

My pavilion G6 G6 2295sa won't read cd/DVD but will play DVDs with cyber link I have gone through the suggested routes when I put in the error code E:\hp DVD-RAM UJ8D1 H.01 please help.

Hi Primhak,
Welcome to the HP Forums! I need to clarify a couple of things the optical drive (CD/DVD drive) is playing DVDs but won't CDs is that correct? What is this error code that you are talking about? What operating system are you running?
Finding your OS:
http://windows.microsoft.com/en-CA/windows/which-operating-system
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Satellite M30X: drive won't read data DVD-R's but plays DVD-R movies and CD's

I have a Toshiba M30X with DVD/CDRW combi drive.
I have accumulated 12gb of digital photo's that I wanted to clear but did not fancy the number of CD's that entailed so I purchased a LITEON EZ-DUB external DVD rewriter and made 3 DVD-R's full of JPEG's.
However, when I put these DVD's in the Toshiba combi drive, it clicks away for a moment or two but when I click on the combi drive in My Computer, the folder is empty and it says there's 0 bytes.
CD's still work, both audio and data, DVD movies play just fine, DVD-R's made on my Pioneer DVD recorder (for TV - looks like a video/nothing to do with PC) play fine, but it will not recognise DVD-R's with data (JPEG's or MP3's) on them.
It makes no difference which software was used (both Nero 6.6 and LITEON EZDUB) and it doesn't matter whether the discs are finalised, single session, multi session or what - it won't play any of them.
These discs however work perfectly in my 7 year old desktop with a 4 year old Sony DVD/CDRW combi.
I'm stumped.
I don't particularly want to reinstall windows in case it doesn't recognise the Recovery DVD and I seem to remember Microsoft One Note having to be activated by telephone with a code that is different each time you ask it to generate one.
It's a bit of a pain as I wanted to carry my photo's with me in my laptop bag.
I don't want to be carting around an external DVD writer just to read the DVD's.
I've updated the firmware for SD-R 2512.
It had no effect other than to freeze on an all black screen during restart - I had to hold down the power switch after 15 minutes in that condition.
The laptop is 1 year and 26 days old if that counts for anything.
Anyone have any ideas? Or do I just put up with it.

Hi
Well, I can only make some suggestions.
You are able to place many MP3 and Jpeg files on the DVD.
Maybe this is a reason why the explorer cannot handle the DVD.
Try to burn the DVD with JEPG picture but don't make the DVD full with these files.
You should let a free space on the medium. Maybe it helps.
But it's very strange for me and this is only a suggestion. I have never tired it and don't know if it helps.
I had a similar issue on my notebook but I have solved it by using a compatible medium. Some drives prefer different mediums for different kind of files.

G60t-200 CD/DVD drive won't read XP discs

I recently re-installed Windows 7 Home Premium after I had a blue screen crash forcing me to re-format the hard drive on a g-60t-200. I've installed all the recommended Windows updates as well as all the HP updates for the g60t-200 model that I have but now the CD/DVD drive will not read the files on older discs that I burned using Windows XP on another machine. It shows the disc in the drive and shows the folders on the disc but when you open the folders, the files are not visible. When I right click and open up the properties of the disc while it's in the drive it shows it as "UDF" format. The other machines in the house running Windows XP can read the disks just fine and show all the files. Is there an update or driver I'm missing that will allow the drives to read the files on discs burned using Windows XP?

Hi sherifawad, and welcome to the HP Forums!
I understand that after restoring your computer, you can no longer read CD/DVD's that were burned on XP with the Windows 7 operating system. I will try my best to help you resolve this issue. I suggest that you make sure that you have the latest service pack for Windows 7. Here is the Service Pack and Update Center for Windows.
I am including this document for Using HP Support Tools to Update HP Software, Drivers, and BIOS with Windows 7.
I hope this helps, please let me know how it goes.
Thank you,
I worked on behalf of HP.

CD/DVD Drive will Not read CD/DVDs

This desktop is only about 3 months old and so far has worked great!! But since last week for some reason the CD/DVD Drive will not read any disc. The tray will open but then nothing happens at all once a CD/DVD is in. Doesn't even sound like it is spinning. Any ideas?? Please help!! Thanks!!

Also it is running Windows 8 and is a Ideacentre K410. And the CD/DVD Drive it is showing I have installed is TSSTCorpDVD-RW SH-216BB Not sure if that has always been the drive or not.

Drive won't read any dvd .. ejects it automatically after spinin some time

My MBP is just some 2 months old and suddenly it has stopped recongnizing/reading the dvds, they dont even show up on the desktop, dont even read a blank dvd. it spins for some time with a noise and then ejects it out by itself. it is doing this for all the dvds ( a great number of different dvds ) i have tried in it.
The strange thing is it reads the CD , the only problem is with the DVDs.
Is dvd reader has got defective ? ..or some firmware problem?..
Profiler details for my cd/dvd drive is :
HL-DT-ST DVDRW GSA-S10N:
Firmware Revision: AP09
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -R DL, -RW, +R, +RW, +R DL
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: No
Any help will be highly appreciated.
Regards & Thanks
Naveen

had the exact same problem. Found by accident a solution on eBay.
http://cgi.ebay.nl/ws/eBayISAPI.dll?ViewItem&item=140220469470
--- part of the description ---
Q) The drive keeps ejecting CDs and DVDs after installation?
A) The screws which holds the drive chassis down are apparently too long for the drive. I suggest loosen them or screw the left drive rail in with a single screw in the front, removed the CD guide completely and screwed it all back together
The back screws should be loosened and / or left out completely if the problem persists.
--- end part ---
So I decided to open my MBP and used the guides form ww.ifixit.com and loosened the screws as described above, closed my MBP.
The problem is now gone !

My DVD Drive won't read Any DL Dvd

Hello, I have a problem. I am trying to burn a DVD+R DL from memorex and everytime I put it in my drive it always eject. But the drive works since I just re-installed my OS from the mac OS boot disc that came with the computer when I bought it. And I also installed programs from dvd before. Is this a driver not updated or my dvd drive is broken or what's wrong with my computer. Please help me. BTW, My computer is running on leopard, its a unibody 2,4ghz.
Sebastien

You can try resetting the SMC Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
and PRAM How to Reset NVRAM on your Mac - Apple Support
If that doesn't help you can try a cleaning disc or a quick shot of canned air. It's likely though that your drive has failed, it' not all that uncommon. It that is the case you can either replace it or have it replaced but it's far cheaper just to buy a usb external drive....just not Apples because it won't work with macs with a built in drive working or not. .

Dvd drive won't read/ejects dvds at a whim

Similar Messages

Maybe you are looking for