DVD driver for the externel DVD device

Hi,
I have Lenovo u110 laptop and it has the externel DVD R/W device. Is there an DVD drivers software (for window XP) that I need to install? Thanks.

No, you don't. Driver is generic.
//help will save the world

Similar Messages

Question about the Intel driver for the IDE controller

Greetings to all:
Lenovo has recently published another driver for the IDE controller and I wonder how many of you that have a T60, T60p, T61 and T61p have been able to actually install it.
My controller device is:
Intel(R) 82801GBM/GHM (ICH7-M Family) Serial ATA Storage Controller - 27C4,
both in XP-SP3 as in Vista SP1, 32bits versions ( see bellow details of my T60p, which has 2 hard drives)
Interestingly enough the driver on each is v:7.0.0.1020 (2005/05/23) for XP and v:6.0.6001.1800 (2006/06/21) for Vista-B. They are working well as far as I see, but now and several times before, I have tried to update them but they do not install. The message is that I have already the best driver. I noticed that the label of the controller is not quite exactly spell out in the instruction text file or the .inf, and the one that comes close, is that of the so call ICH7-M family.
Why is this? There are at least 7 versions discussed in the history. It it perhaps because the one for the ICH7-M family is always the same? System update does not install them either.
Forgive my curiosity but why bother publishing if they can not be installed? Or perhaps somebody has. This is not logical.
Cheers.
Rolando E Creagh, MD. FACS. USA. T61p, 64608WU, Dual Core Centrino 2.6 GHz, T9500, 8GB RAM, Intel TurboMem 4GB (working). HDD 0: 1.0TB 7.4K rpm AF w/ W-7 Ultimate SP1 64b (2nd clean install). HDD 1: 0.5TB 10K rpm w/ W-7 Ultimate SP1 64b (cloned). HDD 2:1TB 7.4K rpm AF w/W-7 SP1 64b (1rst clean install). HDD 3:250GB, Vista-B-SP2 clean install, HDD 4:100GB, XP-SP3, factory install. HDD 5:1.5TB, 5K rpm, AF, DATA. 2504-10U Mini-Dock
Solved!
Go to Solution.

For those who think I can not follow directions.
First, the driver for the Intel IDE device in a T60p is obviously from Intel. But there are two ways to get it fulfilled.
Lenovo publish the Intel drivers with perhaps there own twists, refinements and in the absence of clear contrary information, that they are perhaps more fine tuned to the machine. It uses the following inf files to have them install: iaahci.inf and iastor.inf. They are revised whenever Lenovo fell is necessary and eventually published.
I must assume they are in use if you have a Vista system originally installed by Lenovo and that is why those inf are the ones you find in the updates.
Mi T60p was purchased 2 years ago with XP-Pro, just before the release of Vista, with the understanding of a free upgrade to Vista-B shall be send when finally released. An Indeed they keep their word and send me a Lenovo branded full version of MS Vista-Business, some 4 months latter (not an image). Rather than upgrade XP-Pro and to avoid the time in limbo and work interruption of the Vista less desirable over XP, I did a successful clean install into a new hard drive, followed by a Lenovo system update, which changed many drivers and installed programs, etc. But as you might imagine, the Intel IDE-SATA driver installed is the one provided by MS (v:6.0.6001.1800 of 2006/06/21), (which uses a different installation file mshdc.inf) and, until proven otherwise, I must assume more generic, since it is for any and all machines, following the standard of the hard drive SATA type.
Talking to Lenovo support for nearly 1 1/2 hours last week, was at least not good for my blood pressure, while attempting to explain the issue and refuting a collections of nonsense from the support tech. Eventually a supervisor assure me that the driver was the same and that it has not change for a long time, as it is the same even for XP. Well, why bother with updates if that is the case? But I see that there are others IDE drivers species for animals such as Dell, or HP, etc. Thus you must accept that there is a strong case for a Lenovo modified Intel driver and thus the updates. Tech support could not answer such question, nor they were able to install version 8.6.0.1007 (date 2008/12/04) of the driver.
I fell the machine is working well, but have nothing to compare with (MS Experience Index 4.3). And as usually happened, sometimes you do not appreciate how sick you are, until you get cure. The question remains about the driver been generic and sufficient or specific and optimal.
Cheers and happy holidays.
Rolando E Creagh, MD. FACS. USA. T61p, 64608WU, Dual Core Centrino 2.6 GHz, T9500, 8GB RAM, Intel TurboMem 4GB (working). HDD 0: 1.0TB 7.4K rpm AF w/ W-7 Ultimate SP1 64b (2nd clean install). HDD 1: 0.5TB 10K rpm w/ W-7 Ultimate SP1 64b (cloned). HDD 2:1TB 7.4K rpm AF w/W-7 SP1 64b (1rst clean install). HDD 3:250GB, Vista-B-SP2 clean install, HDD 4:100GB, XP-SP3, factory install. HDD 5:1.5TB, 5K rpm, AF, DATA. 2504-10U Mini-Dock

How can I switch the region code on MBP w/ DVD drive for the 5th and final time?

How can I switch the region code on MBP w/ DVD drive for the 5th and final time? It brings up the window with that world map to do it, including the warning that "this is the 5th and final time I can do this", when inserting a DVD and opening "DVD Player", but it never executes my click on the "Change Drive Region" button prompt.
VLC or Quicktime Player won't play it either, but won't bring up that window to change Region Code anyway....
Otherwise, I'm not having any other issues with this MBP at all. Peak performance on all counts :-)
I tried resetting SMC after chatting w/ Apple Support, but it didn't help.
That was the link they provided. Resetting the System Management Controller (SMC) on your Mac
Tried zapping PRAM as well.
Thanks for any clues, Rene

Region encoding is the mechanism that enables motion picture studios to control the worldwide release of their movies. It is required by the DVD Forum (http://www.dvdforum.org/forum.shtml) in all commercial hardware DVD players. Every DVD-Video disc contains one byte of data representing a region code, which limits where the disc can be played.
http://support.apple.com/kb/HT2397
Once you have set the region in DVD Player five times it cannot be changed. However see this also:
http://support.apple.com/kb/TA25416?viewlocale=en_US&locale=en_US
Instead, use VLC to view videos from different regions:
http://www.videolan.org/vlc/download-macosx.html

Where is the driver for the LGE-DMGSA-U10N(B) DVD multi Burner.

Where is the driver for the LGE-DMGSA-U10N(B) DVD multi Burner.
Thank you,
Tim

Hello,
As far as I know, DVD±RW disc drives are automatically detected by Microsoft Windows XP and newer versions of Windows. Are you looking for the latest firmware? The latest update I could find for a T61 is here on Lenovo's support web site.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Has anyone created a device driver for the DG101 Programmable Delay Generator?

I am wondering if anyone has written a LabVIEW driver for the DG101 Programmable Delay Generator third party device?

I have looked at the instrument driver network and there is nothing listed there. The board comes with the source code for the device as well as a gui to run under windows but I am working on the PXI-8196 embedded controller running a RTOS so the .dll that comes with the board is not compatible. I have been on the phone and email with NI over the last 3-4 weeks trying to figure out how to import the .dll, how to wrap the .dll, and how to create a new .dll. I spoke with someone yesterday and they told me that I would have to write a register level interface driver to work with the board and that it is very difficult for even the most experienced person. They suggested I outsource it but I was just curious, seeing that this board belongs to a very small community of programmable delay generators, that someone may have written a driver that is available.
Thanks,
Tracy L.
Message Edited by Tracy L. on 09-19-2006 11:48 AM

Where can I download a Windows 7 64bit driver for the hp CDDVDW TS-L633N on my cpq60-615DX

EDIT --
I neglected to say that I tried updating the driver from the Device Manager device window and the result was a message saying it could not find a newer driver, that the one installed was correct.
Another EDIT
I also did not say that I have uninstalled the device, through Device Manager. Upon restarting the system, the drive was found and software installed but the problem remains.
Original message follows:
System: CPQ60-615DX
Windows 7 Home Premium 64bit
Drive: hp CDDVDW TS-L633N
In the process of installing some Roxio software, Creator 9, an unusable driver, are part of one, was installed. Now the device is not working.
When I didn't see on the list of devices on Windows Explorer, I went to Device Manager and found that it was flagged with the "problem" icon (exclamation point on a yellow background).
The General Tab Device Status box contains"
A driver (service) for this device has been disabled. An alternate driver may be providing this functionality. (Code 32)
The following information is shown for the device:
hp CDDVDW TS-L633N ATA Device Properties windo
Driver Tab:
hp CDDVDW TS-L633N ATA Device
Driver Provider: Microsoft
Driver Date:     6/21/2006
Driver Version: 6.1.7601.17514
Digtal Signer:   Microsoft Windows
Driver File Details:
hp CDDVDW TS-L633N ATA Device
Driver files: c:\Windows\system32\Drivers\cdrom.sys
Provider:         Microsoft Corporation
File Version:     6.1.7600.16385 (win7_rtm.090713-1255)
Copyright:        Microsoft Corporation. All rights reserved.
Digital Signer:   Microsoft Windows
c:\Windows\System32Drivers\PxHlpa64.sys
Provider:         Sonic Solutions
File version:     2.03.27a
Copyright:        Copyright 2003 Sonic Software
Digital Signer:   Not digitally signed
It appears that the Creator install installed part of the driver but not one that functions. It might be a problem with Windows 7 or the fact that this install is 64 bits.
I have searched the HP site and can't find a driver for the device. When I look at the list of drivers available for this system, the optical drive is not shown.
I downloaded and installed the HP driver search program - or whatever it is called - and ran it. There were no devices listed on "Optical Drive" tab when I looked at the results - it could not "see" the drive.
I realize that what I need is probably a generic driver from MS, that's why one is not shown on the HP site, but how do I go about finding the right one for this device?
Is there a generic "one size fits all" driver for Windows 7 which can drive this device?
Any assistance will be greatly appreciated.
Bob and Simon
This question was solved.
View Solution.

HI nhgfdstr:
Thank you for your inquiry. I am pleased to assist you!!
I am sending you a link to a "CD/DVD Drive Is Not Detected (Windows 7)" click here. For your convenience here is a document on "Downloading or Updating Software and Drivers for HP Computers"   click here.   I am also sending you a link, to third party site, with a driver for your hp CDDVDW TS-L633N , " Hp CDDVDW TS-L633N ATA Device Drivers Download" click here.
Happy Holidays!!!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Is it possible to have two USB drives for the IPad? I want to bring RAW photo files from my camera, through the IPad and back to an external hard drive. One of my cameras does not use an SD card. How can I do this?

Is it possible to have two USB drives for the IPad? I want to bring RAW files from my camera through the IPad and out to an external hard drive. One of my cameras has an SD card but the other one doesn't have a card that would fit in any of the camera devices I've seen on line. Realted to this, I bought the IPad camera accessory. Can I put the SD card in the device and also hook the external hard drive to the USB port of the accessory and download from the camera to the hard drive? Can I put Lightroom or the Nikon photo editing software on the IPad? Right now I carry a PC laptop and external hard drives with me on wildernes trips. Internet and WiFi are not available. Because I shoot so many photos and they're in RAW I need to download from the camera to the external drive because I run out of memory on the PC (and it has much more memory than the IPad). I have Nikon NX software and lightroom on my PC. I'd love to be able to reduce the weight I carry by using the IPad to edit my photos each night while on trips. Is this possible and how would I do it? I'd appreciate any guidance.

No, the camera connection kit only supports the copying of photos and videos to the Photos app, it doesn't support copying content off the iPad. For your second camera instead of the SD reader part of the kit, does the iPad to camera cable not work with it for direct transfer to the iPad ?
For Lightroom and Nikon software again no - you can only install apps that are available in the iTunes app store on your computer and the App Store app on the iPad, 'normal' PC and Mac (OS X) software are not compatible with the iPad (iOS). There are some apps that perform fairly basic editing functions that are available in the store, but nothing as sophisticated as, for example, Lightroom.

Where can I find a driver for the SM bus? It is not available thru HP support.

I have a Compaq Presario V5120NR notebook. My operating system crashed and was not recoverable. I ourchased a copy of Windows XP Home Edition and installed it. This is the same operating system that came on the notebook. I downloaded all drivers available thru HP support and installed them. The Device Manager still shows that I have no driver installed for the SM bus. The notebook works, but has a few "quirks", such as the screen saver comes on, but then goes off for no apparent reason. No major problems, just little annoying things like that. Any idea where I can get the driver for the SM bus would be greatly appreciated, :-)
This question was solved.
View Solution.

You're very welcome.
Normally the SMBus controller with the chipset in your notebook is installed with the graphics driver.
I figured installing the generic AMD driver might contain the SMBus controller your notebook needs.
So, you can try that, or...
I have one other suggestion. Try this driver and see if it works. You have to manually install it.
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12...
Download and run the file. It will extract to C:\SWSetup\sp33927.
Go to the device manager and click on the SMBus controller needing drivers.
Click on the driver tab. Click on Update Driver.
Select the manual search method and browse to the above folder.
Select the SMBUSati.inf file and see if it installs the smbus controller.
This driver is from a dc5750 desktop with an AMD chipset. Maybe that is a generic ATI controller used by a lot of PC's.

Where can i find a Labview driver for the "8990a PEAK POWER ANALYZER" it's not on NI's site.

where can i find a Labview driver for the "8990a PEAK POWER ANALYZER" it's not on NI's site.
if there is no driver maybe you can tell me the closest instrument that comes to this one from the list at,
http://search.ni.com/query.html?lk=1&col=alldocs&nh=500&rf=3&ql=&pw=595&qp=%2BContentType%3AInstrumentDriver+%2BIDNetManufacturer%3A%22Hewlett-Packard%22&qt=peak+power+analyzer&layout=IDNet
so i could modify and use the driver

Hello,
It looks like Agilent/HP makes the 8990A, but I was not able to find a driver for it that we or Agilent has written for this device.
Since I am not familiar with the 8990A, I cannot recommend which drivers might be similar, but you are pointed in the right direction. Agilent themselves might know more about which models use similar command sets so that you can modify a driver easily.
Hope this helps.
Scott B.
Applications Engineer
National Instruments

Is there a driver for the PXI-8310 that works with Windows 7?

The only one I can seem to find is for XP.

Hello LouisTI,
Unfortunately there is not a Windows 7 driver for the PXI-Cardbus8310, as this is a legacy device which is currently going EOL (End of Life). The XP driver for the 8310 (which you may already have found) can be downloaded here:
http://joule.ni.com/nidu/cds/view/p/id/370/lang/en
If using Win 7 is critical, we recommend the PXI-ExpressCard 8360 as a replacement for the 8310:
http://sine.ni.com/nips/cds/view/p/lang/en/nid/202294
Hope that helps!
James M. | Applications Engineer | National Instruments
James M. | Applications Engineer | National Instruments

OS X driver for the Motorola DS6707

s there no OS X driver for the Motorola DS6707 the recomended barcode scanner for service providers for Apple?
I just bought one on Apple's reccomendation and can't find any support for OS X of any kind.

While the device works perfectly fine as a scanner and sends simulated keystrokes to the computer, the DS6707 is also capable of working as a camera for stills and video.
That's where the drivers come in.
If you're using POS or repair management software that allows for image capture, it is nice to photographically document any damage to systems when they are checked in for service. Since I was always holding the scanner(camera) in my hand I wanted that functionality.
The hardest scans for me are the AP/BT cards and the MBP 13" display 2D code on the cables. Strangely moving the cross-hairs slightly off the target barcode seems to improve the read success.

Will there be a camera driver for the Lenovo ThinkPad X220T using Windows 10 64-bit

Will there be a camera driver for the Lenovo ThinkPad X220T using Windows 10 64-bit? Laptop Tablet Model 4294CTO

I installed the latest Win7 and Win8 drivers and the camera appears for Skype and in Device Manager as Integrated Camera under Imaging Devices, but does not appear in Devices and Printers. There is no VEN DEV ID property for the device. Hardware IDs are:USB\VID_04F2&PID_B217&REV_8029&MI_00USB\VID_04F2&PID_B217&MI_00

Windows 7 beta driver for the Creative N400

Hi everyone,
There is a Windows 7 beta driver for the Creative N400 speakers system.
Creative Speakers Beta Driver 1.02.000
Filesize : 24.68 MB
Release date : 13 Apr 09
File Name : USPK_W7DRVBETA_US_1_02_000.exe
This download is a beta driver providing Microsoft Windows 7 Beta support for certain Creative speakers. For more details, read the rest of this web release note.
Take note of the following:
* THIS IS AN UNSUPPORTED BETA DRIVER. There is no technical support for this driver.
* We recommend that only experienced users install this driver. Do not install this driver on a system used to perform critical tasks.
* Users who are looking for stable drivers should wait for the final release. When this happens, user should install the latest Creative driver available.
This download supports the following devices only:
* Creative N400
Requirements:
* Microsoft Windows 7 Beta
Notes:
* To install this driver
1. Download the .exe file onto your local hard disk.
2. Double-click the downloaded file.
3. Follow the instructions on the screen.

Sorry but this information is not available at this time. If there is any updates, you will see it in the announcement page.

I would like to know if you have to back up a macbook hard drive, can I use a external hard drive that has been previously used to back up several pc 's, or is it best to have a separate external drive for the Mac?

I would like to know if you have to back up a macbook hard drive, can I use a external hard drive that has been previously used to back up several pc 's, or is it best to have a separate external drive for the Mac?

In the Mac side of things, backups usually come in two flavors: clones or incrementals.
A bootable clone is a bit-for-bit copy of all essential files in the startup volume. If using the Lions, clones can be made using CarbonCopyCloner or just plain old Disk Utility. These backups represent the safest protection of your info, but take the longest to do. Recovery is an inverse process: you copy the clone back into the internal drive.
Incremental backups start with a complete backup of the startup volume and only copy whatever changed from the previous run. OS X includes the fully integrated Time Machine backup utility to do this. It is extremely easy to do and takes the least amount of time. Recovery is another matter altogether since you have to start with a freshly installed instance of the OS and have to apply all intervening backups to bring the result to the latest saved version.
As for where the backup takes place, the recommended media is an external dedicated drive or drives connected via the fastest interface available on your Mac: Thunderbolt, USB3, Firewire, or USB2. Network-based backups, wired or wireless, are attractive but may not offer the same performance and hence take longer. Also important to note that the entire drive need not be completely dedicated to a single backup. The Mac's EFI firmware infrastructure allows for an unlimited number of partitions on a hard drive and each can be used for either type of backups.
Holler if you need specifics on how to do each. This was just an executive summary.

Firefox (latest and greatest) has been giving me synaptics scroll wheel errors. It has worked fine up until 3 days ago. I have the latest driver for the touch-pad, from synaptics, for my toshiba laptop L505D-S5986. Operating system is Windows 7 (32-Bit).

Firefox (latest and greatest) has been giving me synaptics scroll wheel errors. It has worked fine up until 3 days ago. I have the latest driver for the touch-pad, from synaptics, for my toshiba laptop L505D-S5986. Operating system is Windows 7 (32-Bit). Have tried it on other browsers, and works as it should. The last add-on i installed for Firefox was "Fox Filter" so my kids couldn't accidentally stumble onto sites of immoral tastes. I can't see why that would have any effect, but it was the last update/add-on i installed to the browser, but even then,.......it was working fine for a week and a half afterwards until now. Please help.
== This happened ==
A few times a week
== A week and a half after i installed Fox Filter. ==
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/532.5 (KHTML, like Gecko) Chrome/4.1.249.1064 Safari/532.5

Hello Steve.
You may be having a problem with some extension or plugin that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
If you detect a faulty add-on, you should contact its author for support. You can also search for alternatives. Site filters are relatively common in the add-ons gallery: [http://addons.mozilla.org addons.mozilla.org].

DVD driver for the externel DVD device

Similar Messages

Maybe you are looking for