DVD dual layer blank media problem

Hi,
I used HP branded media without any problems in the past. Now I got a roll of Ritek dual layer DVDs and most unfortunately the drive ejects them as if they were incompatible.
Does anybody know if Apple keeps a page with compatible media? Or is there any indication which brands would work and which don't? The dual layer media is still quite expensive and I don't know if I can convince the retailer to take back opened disks...
Best
Jurgen

If they're DVD-R DL discs then there's the problem. They should be DVD+R DL.

Similar Messages

Why won't my Mac recognize Verbatim Dual Layer blank DVDs?

Why won't my Mac recognize Verbatim Dual Layer blank DVDs?
I've just completed a 140 minute project in FCP. I've encoded an MPEG2 file that is 5.75GB in size. Brought into DVDSP and am trying to burn the DVD.
I have Final Cut Studio 1, latest updates and everything.
Because of the 5.75GB size I need to burn to Dual Layer DVD. I have Verbatim 4x 8.56GB dual layer DVDs.
When I click buld/burn and pop in a dual layer DVD I get an error saying "please insert compatible disc".
Even with every app closed. If I put one of these DVDs in my Mac it simply spits it out after about 20 seconds.
For some reason the Mac won't handle or understand these Dual Layer DVDs.
I bought this Mac Pro about 4 months ago and it is the 2 x 2.66Ghz Dual Core Intel Xeon machine and the DVD drive (according to system profiler) is a Pioneer DVD-RW DVD-111D. In system profiler it says "Pioneer DVD-RW DVD-111D"
Can anyone tell me if this DVD player is actually capable of dual layer, or do I need to buy one.
In System Profiler under Revision it says: AB09 and under Protocol it says: ATAPI
Can anyone advise please?

If you have access to a pc into which you can install the 112, or if you have bootcamp, you can replace the Apple supplied firmware with Pioneer firmware. This should restore full functionality to the drive. The latest Pioneer firmware for the drive is version 1.21 and can be found here: http://www.cdrinfo.com/Sections/Firmware/SingleModel.aspx?DriveId=1426
mac pro, dual 1.25 g4 - Pioneer 111d, LG H10, Plextor 716UF, LG 4163,Pioneer 112 Mac OS X (10.4.10) dell 9200, dell xps 400 Benq 1650, Plextor Premium

DVD dual layer write speed?

Anybody know what the maximum write speed of the Superdrive is, for dual-layer DVDs?
I have a late 2011 MacBook Pro 15" and I want to buy some blank DL DVDs. I'm looking at Verabtim DVD+R DL blank media. They offer both 2.4X and 8X speeds. I've read that the 8X disks - which are more expensive, roughly 15 for the price of 20 of the slower disks - can be a problem for older drives that don't support that speed.
I already know that my Superdrive will write at 8X or more for a single-layer disk.

"Be sure to take full advantage of:
About this Mac > ( More Info ) > Disk Burning ..."
Yup, this showed me that my 8X (single layer) disk could in fact be burned at 8X, but without any DL disks for testing, ATM doesn't tell you anything about burning speeds.
Thanks for the confirmation that I do NOT want to buy the 8X disks. I've gone ahead and ordered the 2.4X Verbatim disks. I also saw some labeled as 2.4-6X, and I suppose those would work with my 4X drive.

DM4-3055DX DVD-Dual Layer Burner

I have a DM4-3055DX notebook
i wanted to burn some home movies and i purchased DVD-R DL - Dual layer DVD to increase the capacity of the DVD to 240minutes or 8.5 gb
my question is how do i know or find out if my notebook has a DVD-Dual Layer Burner. or supported Dual Layer DVD-Rs
thank you

Try this free Nero info tool
http://www.softpedia.com/get/CD-DVD-Tools/CD-DVD-Rip-Other-Tools/Nero-InfoTool.shtml

DVD Studio Pro Dual Layer Break Point Problem

I have a problem with a disc that I am burning. It is a dual layer (the break point is not set to seamless) with 1 movie that is about 3.6 GB and 1hr 23 min long, a 30 min slideshow, another 30 min extra and five other extras that total to about 20 min. I put the dual layer break point at the beginning of the slideshow, everything played fine on the computer, but on the Panasonic DVD player it just freezes at 35 seconds into the slideshow. Its never had a problem with DLs before. Itried the DVD on my softmodded Wii, on a program for it called WiiMC (it uses Mplayer) and everything played fine. I tried another burn where i set the break point to fifteen minutes before the end on the main 1:23 movie and on the DVD player it still froze at 35 seconds on the slideshow. Is there anything that you guys can suggest to help?

DVD+R or DVD-R?
http://documentation.apple.com/en/dvdstudiopro/usermanual/index.html#chapter=1%2 6section=9%26tasks=true
DVD+R Double-Layer
You can use DVD+R double-layer media, often referred to as DVD+R DL, for burning your dual-layer projects. With DVD+R double-layer media, DVD Studio Pro places the layer break point and sets the switch point to be nonseamless as specified in your project.
DVD+R double-layer discs require you to use the Opposite Track Path (OTP) direction setting when burning the disc. This means that the first layer must be larger than the second layer. See Setting the Dual-Layer Direction for more information.
While DVD+R double-layer discs allow you to burn your dual-layer projects, they tend to have more compatibility issues than the other types of DVD media.
DVD-R Dual-Layer
If your system contains a DVD drive that can write to the new DVD-R dual-layer media, you can burn your DVD project to it with DVD Studio Pro. However, there are several issues:
Because currently DVD Studio Pro has no way to identify DVD-R dual-layer media as having two layers, burning a dual-layer project to it results in the appearance of an alert message telling you that the DVD media may have insufficient room to hold the project. This message is based on the assumption that the disc is single layer. Both layers of the disc will be written to as needed, however, when you click Continue.
If you are burning a dual-layer project, the break point you set will not affect where the layer break actually occurs. Instead, the first layer is written to until filled, at which point the drive switches to writing to the second layer.
The switch between layers is a seamless layer change not supported by some DVD players, which may stop playing the disc when the switch point is reached.
Important: Do not use DVD-R dual-layer media unless these issues do not impact your project.

DVD Dual Layer Not Working?

Hi all!
This is my first time to these forums and I have some trouble with a used Toshiba x205-SLI1 I just bought. the HD Dual Layer burning does not function and the driver appears to be updated properly. It is a TS L802a model, with drivers dated as of 6/21/2006 version # 6.0.6002.18005.
When I insert the Memorex HD +R Media Nero 9 runs up and begins the process but only goes to about 1% then stops. It ejects the DVD which apears to have nothing written to it by looks since I can put the DVD back in and there are no written areas all i can see with data.
Plus the speed of the drive only reaches 2.4 when the max is 8X.
Is there a newer driver somewhere? I need to get this working if possible and without spending tons of money on different media types to "test" the Burner.
Does this burner have some inate problems as i have read on other forums in burning dual layer dvd's?
oh, and it does work with the normal 4.7GB DVD's just fine i have done several of these to back up data on the system.
The system is running as the following drive configuration:
2 @ 200GB Raid 0. Vista ultimate 64 upgraded from Home Premium by the original owner.
The Laptop works in everything else and is in pristine condition all over.
Let me know if more info is needed to make a determination for help please.
Thanks in advance!
Robert
Attachments:
x205-SLI1.txt ‏442 KB

It sounds like a hardware problem to me. Your best bet considering it is new is to take it back to the place of purchase and exchange it for a working model (if it's within the exchange period) or contact Toshiba Support and have it repaired under warranty. Se the Warranty Link at the top of this page for details.
If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

Dual Layer Break Point problem

Hi,
I just found out after I updated DSP 4 to version 4.0.3 my Layer 1 on every project since updating gets corrupted!
I thought it was the Dual Layer discs I used that caused the problem, but after I re-installed DVD Studio to the original version 4.0.0 the same project worked perfect.
Anyone else have issues with Dual Layer Break Point after updating to 4.0.3?
I have tried different chapters as layerbreak points on my project, and even a test project, with the same result. The finished discs is barely playable on some DVD players, showing wierd interference and noise, and DVD Player on mac crashes when reaching the dual layer break point, and the plant i send the master have a software to check DVDs and they said that it couldnt find/was corrupt Layer 1 on one of my discs. Hope someone can fix this, DSP is the best software otherwise!
Best regards,
Mats.

DVD+R or DVD-R?
http://documentation.apple.com/en/dvdstudiopro/usermanual/index.html#chapter=1%2 6section=9%26tasks=true
DVD+R Double-Layer
You can use DVD+R double-layer media, often referred to as DVD+R DL, for burning your dual-layer projects. With DVD+R double-layer media, DVD Studio Pro places the layer break point and sets the switch point to be nonseamless as specified in your project.
DVD+R double-layer discs require you to use the Opposite Track Path (OTP) direction setting when burning the disc. This means that the first layer must be larger than the second layer. See Setting the Dual-Layer Direction for more information.
While DVD+R double-layer discs allow you to burn your dual-layer projects, they tend to have more compatibility issues than the other types of DVD media.
DVD-R Dual-Layer
If your system contains a DVD drive that can write to the new DVD-R dual-layer media, you can burn your DVD project to it with DVD Studio Pro. However, there are several issues:
Because currently DVD Studio Pro has no way to identify DVD-R dual-layer media as having two layers, burning a dual-layer project to it results in the appearance of an alert message telling you that the DVD media may have insufficient room to hold the project. This message is based on the assumption that the disc is single layer. Both layers of the disc will be written to as needed, however, when you click Continue.
If you are burning a dual-layer project, the break point you set will not affect where the layer break actually occurs. Instead, the first layer is written to until filled, at which point the drive switches to writing to the second layer.
The switch between layers is a seamless layer change not supported by some DVD players, which may stop playing the disc when the switch point is reached.
Important: Do not use DVD-R dual-layer media unless these issues do not impact your project.

Which kind of DVD Dual Layer work on MacPro DVD Drive?

On my MacPro 2X3 GHz Quad Core Intel Xeon I have, as a DVD Drive, an
OPTIARC DVD RW AD-7170A:
Revisione firmware: 1.N8
Interconnessione: ATAPI
Supporto masterizzazione: Sì (unità fornita da Apple)
Cache: 2048 KB
Legge i DVD: Sì
Masterizzatore CD: -R, -RW
Masterizzatore DVD: -R, -RW, +R, +R DL, +RW
Strategie di scrittura: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: Inserisci il supporto e aggiorna per mostrare le velocità di masterizzazione disponibili
Now, I purchased 50 not branded DVDs +R Dual Layer (like indicated by the features above) but every time I make a burning I get an error message on verifying ("....sector is unreadable").
My supplier told me that
"It is normal that all DVD writers have problems with some DVDs, while
others work perfectly".
So I don't know which DVD I can take..
Has anyone used successfully some kind? And which?
Tnx

There is a web site that rates DVD media brands. Verbatim DL is what I use and never had trouble.

G4 DVD Dual Layer question

I have a 14" G4 1.07GHz iBook with a Non DVD Burning CD/CDR/CDRW/DVD drive. My question is, will it READ a dual layer DVD? Thanks!

Hhmmm...let me know if it works for you. I have (I think) the exact same setup, and my drive spits out dual discs. We bought Bruce Springsteen's The Seeger Sessions, which is a dual disc, and I had to resort to alternate methods to import the songs into my iTunes library. I Googled after having the problem and found others who had the same problem.

DVD Dual Layer, +/- which is better?

I've been trying to burn a dual layer DVD-R DL from iDVD6 but it won't let me, it will however let me burn a DVD+R DL even though my burner can burn both. What are the benefits however of burning one from the other as iDVD seems to mainly support DVD+R DL whereas it is always recommended to use DVD-R when burning single layer?

Thanks guys.
The problem is I purchased a Dual layer external burner by LaCie and after some digging it appears that although it is capable of burning both +/-R DL, my system profiler only states +R DL, however I can burn -R DL through both system utilities and Toast so this leads me to think that there is a lack of support for -R DL on iDVD6 (whether this is due to the incorrect system profiler provided by LaCie?)
I've had a few tests and iDVD6 just spits the DVD-R DL back not recognising it as a dual layer disc. I've been on to LaCie and Apple about this but they're both passing off blame to each other.
Am I right in assuming that DVD+R DL can play ok in most DVD players? I obviously want to create a stable disc and burning DVD-R DL through system utilities has given me many problems on various players.

Help! DVD dual layer settings

I am trying to burn a 1hr and 47 minutes movie onto an 8.5 gb dual layer dvd. When I try to format this message comes up:
Formatting was not successful. The image exceeds the maximum allowed size for a dual-layer configuration.
I cannot get a successful burn. And also, when I make a break point it's still the same thing:
layer 0 exceeds layer 1?
What do I need to do to have a successful burn with a dual layer DVD? Settings?

The first layer (layer 0) must must be bigger than the second (layer 1), in other words, your layer break must be past the "halfway point" in your media, but before the "halfway point" of the total capacity of the disc.
You would only see this message if you had manually placed a layer break marker. You have two options:
1. move the layer break marker to a position that meets this condition, probably earlier in the main video track
2. rearrange the contents of the disc in the VTS pane of the outline tab. There'll be a little button at the top right of the outline tab that will toggle between the two views, or you can drag the veritcal divider in this window to see the two columns in the outline tab. The VTS view shows you the order in which the media is physically arranged on the disc. You can rearrange these by dragging.
Hope this helps
Max Average

DR8-A firware upgrade to dvd dual-layer?

I am very happy with my DR8-A burner, but i am wondering if MSI has any plans to upgrade the firmware to the future Dual-layer dvd formats. I have read that Bueq is offer this for their new drives.

if it can upgrade to 8x8 - good or bad news

DVD "Dual Layer"

Folks - I assume my model (iSight - last version) came with a "dual layer" DVD RW. Does this mean I can burn 9G DVDs? What is "dual layer"? Thanks.

Yes, you can burn dual-layer DVDs on your iSight iMac. The capacity is about 8.5GB per disk.
A DVD contains a layer of an ink substrate that is hit (burned) by a laser. The laser creates small holes in this ink. A dual-layer DVD obviously contains two layers of this chemical and by adapting the laser intensity both layers can be written.
It is like an old vinyl record, only where both sides are on the same side of the disk.

DVD Dual-Layer Drives Recommendations

I am looking to get a Dual Layer DVD drive.
Does anybody have a good recommendation? Internal? or External?
Oh by the way, I am still using DVD SP2, do I need to upgrade?
Thanks
Paul

I am under the impression that even Toast 7 will not read the dual layer break point set by DVDSP in either a VIDEO_TS or a disc image. Believe me, I would love to find out that I'm wrong on this. This ability alone would be worth the price of the upgrade for me (I'm still using Toast 6).
Someone asked a question specifically about this either late last week or early this week in this forum, and I believe it went unanswered.
This recent post on the CreativeCow was the closest answer I could find: http://forums.creativecow.net/cgi-bin/newreadpost.cgi?univpostid=859311&forumid=155&postid=859517&pview=t
I have not used Discribe, so I can't speak for its abilities. Its website isn't very helpful in this regard.
Hopefully someone who has firsthand experience trying this will post a reply.

15" PB Dual Layer SD Airport Problem

This new 15" PB has the same problem with signal strength that other threads have posted. I have not found an answer that works on the new 15"PB. Does anyone have a suggestion? Do Apple techs read these questions?
PB 15" Dual Layer SD Mac OS X (10.4.3) 1.5 GB

Officially Apple will not respond to issues in these discussion boards. As it says on the forum home page, "Our discussion forums are filled with thousands of Macintosh and iPod users from around the world. Search for an answer, post your question, or answer other users' questions in the Apple Discussions community...."
The keyword is 'users'.
However, you probably can post a suggestion here:
http://www.apple.com/feedback/powerbook.html

DVD dual layer blank media problem

Similar Messages

Maybe you are looking for