Dvd either gets rejected or won't eject

i just got my mac book pro about 5 months ago. I have recently ran into a problem with my dvd slot where at first when i would insert a dvd, it would automatically spit it back at no matter how many times i re-inserted it back in. But now that it takes my DVD, it won't eject it unless i tilt the whole laptop so that the dvd slot is perpendicular to my desk. It would also make large, deep scratches on my dvd once it's ejected. Please help me. THere may be something wrong inside because i do hear sounds of parts when i tilt me computer and i know that is not right.

Wrong Forum. But, your SuperDrive is messed up. Call Apple Repair.
Michael

Similar Messages

Since installing mountain lion on my late 2008 macbook the cd/dvd drive isn't working won't ejects cd.

since installing mountain lion on my late 2008 aluminum macbook the cd/dvd super drive isnt working won't play or import media/music just ejects cd.
Any Ideas ?

Have you set System Preferences/CDs & DVDs to what you want to happen? This helped one person.
Here is an Apple support article, but the information is pretty basic:
http://support.apple.com/kb/PH10614

Can't Back up iTunes library - DVDs keep getting rejected

Have just upgraded to iTunes 7.1. Tried to use the Back Up function mentioned in "What's new...". Unfortunately, every time I try to back up the iTunes library to a blank DVD-RW, the computer fails to work out what the disc is and then spits it out. Why would that happen?
Are some brands of DVD-RWs incompatible with Macs? Have tried TDK 4.7GB DVD-RW & Panasonic 4.7GB DVD+RWs. Both rejected.
Any advice appreciated. Apart from buying an External HD; too strapped for cash!
PowerBook 17" Mac OS X (10.4.8)

DVD-R or DVD-RW, either should be fine; it's the +R disks that won't work.
The fact that -RWs won't work suggests to me that you may have a hardware problem with the drive (it's quite possible for a drive to be able to work with CDs but fail with DVDs or vice-versa). In any case, it's not an iTunes problem, so you might want to take the issue up in the PowerBook DVD forum. Someone there may be able to suggest something to try to determine if it's an OS or hardware problem.

DVD keeps getting rejected!

Friday night I was able to put a DVD in and play it, but starting today I tried to put a DVD in and it ejects it right out about 30 seconds later. It doesn't sound like it reads it or anything. It is an actual DVD, no copy no DVD -R. Can anyone share some light onto this problem?

sorry about that, it's working on my end. Anyway, here is the exerpt that applies to you
The drive accepts discs but they do not mount or are automatically ejected
Check the disc's surface for scratches and dirt, since these things can prevent the disc from appearing on the desktop.
Reset the Power Manager (PMU) or System Management Controller (SMC).
Ensure your drive can read the specific type of disc being used. For example a "combo drive" can read a DVD-R and burn a CD-R however it cannot burn a DVD-R. The utility System Profiler may provide additional information regarding what media your computer supports.
If the discs continue to not be recognized, please contact Apple, contact an Apple Authorized Service Provider, or make an appointment with an Apple Retail Store for additional troubleshooting, evaluation, or service.
SMC RESET INSTRUCTIONS:
Resetting the SMC on Mac portables with a battery you can remove
Shut down the computer.
Disconnect the MagSafe power adapter from the computer, if it's connected.
Remove the battery.
Press and hold the power button for 5 seconds.
Release the power button.
Reconnect the battery and MagSafe power adapter.
Press the power button to turn on the computer.
Resetting the SMC on portables with a battery you should not remove on your own
Note: Portable computers that have a battery you should not remove on your own include MacBook Pro (Early 2009) and later, all models of MacBook Air, and MacBook (Late 2009).
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.

My dvd won't eject

I bought my desktop 27 inch mac last year and haven't had any problems. however, suddenly when I put in a dvd, i get a message that the disc is not supported. Mind you, I'm inserting dvd's from Netflix and legit manufacturers. Today, I tried to circumvent the problem by opening dvd player before inserting the disc only to get the same message; and now the disc won't eject via the player, or via the keyboard. I'm stumped.

Hi, orange07 -
Don't know about the DVD not working. But, to eject it try this:
Restart. Immediately press the left mouse button, keep it held down. This is a hardware-based instruction to the Mac to eject all removable media.

How do you remove a cd from the macbook air superdrive when it won't eject. all is get is the option to burn a cd when i click eject

Just bought a mini and a dvd superdrive. was uploading pictures and one cd won't eject when I click on the eject icon. It will display that I can burn one if I insert a cd, but won't eject the current cd. How do you override the pop up or manually eject the cd from the superdrive without taking it to a store or asking for a replacement?

You can also eject a disc by restarting your computer and holding down the primary mouse button while the computer is starting up until the disc is ejected.

TS3648 great, but my MBA did not come with an installion disc, only a tiny jump drive that is not recognized by windows; and I can't get the contents of that burned to a DVD either. So how the heck do I get the drivers into Windows 7? My MBA has bootcamp

great, but my MBA did not come with an installion disc, only a tiny jump drive that is not recognized by windows; and I can't get the contents of that burned to a DVD either. So how the heck do I get the drivers into Windows 7? My MBA has bootcamp 3.0.4.

Here's what I get:
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0 mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether 00:11:24:7d:e7:1e
media: autoselect (none) status: inactive
supported media: none autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback>
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::211:24ff:fe28:2e71%en1 prefixlen 64 scopeid 0x5
inet 169.254.115.141 netmask 0xffff0000 broadcast 169.254.255.255
ether 00:11:24:28:2e:71
media: autoselect status: active
supported media: autoselect
fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 2030
lladdr 00:11:24:ff:fe:7d:e7:1e
media: autoselect <full-duplex> status: inactive
supported media: autoselect <full-duplex>

DVD Drive won't eject!!!

I was transferring some files from a dvd I had burned and now it won't eject the disc. When I press the eject button, it ejects, but before any of the disc comes out, it automatically reloads the disc. I've tried restarting the computer, even holding down the eject button when the computer boots up. But in the end, it's the same result. I'M nearly desperate to take it in to be worked on. what should I do????????

This is quite interesting, bear with me.
Apple reseller removed the dust guard because he suspected that was fouling the disc. However he returned the laptop to me minus the guard so there was a great big hole in the side of the case. I complained to Apple and they agreed it should not have been removed without my say so. Apple do not replace this part as its part of the lower case, unless you (me) pays for this repair, (which I find strange as the part was easily removed),
Long story short the lower case is being changed free of charge to enable the dust guard to be fitted.

DVD won't eject and MacBook pro 2,16 new

On a new Macbook pro 2,16 last generation the Disk won't eject, I have tried F12 and start but won't come out, anybody had the same problem the MAC try to eject the DVD but it won't come out

I would like to share with you my experience.
Only 2 hours after buying the MBP, I decided to re-install all the system to save space inHDD.
The second disk was stuck, I tried to pull it out without success.
I tried to see whet happened and i concluded that the CD hit the top of the slot.
So I decided to push with my thumb, reasonnably on the right hand side part of the computer (close to the trackpad) to move down the SuperDrive...An it worked.
I have to mention that I trid to find in the NET what was the fittings condition of the SD, and I knew there was some degree of feedom verticaly. I assumed it was just a matter of few millimeters.

I have an older IMac 5. I installed snow Leopard on. Now my DVD drive is not working. Discs go in but it dosn't boot up or show in finder. Then disc won't eject unless i shut down and restart. HELP !

I have an older IMac 5. I installed snow Leopard on. Now my DVD drive is not working. Discs go in but it dosn't boot up or show in finder. Then disc won't eject unless i shut down and restart. HELP !

Snow Leopard cannot run on a PPC G5 Mac as it requires an Intel processor. Please confirm what Mac you have.

HT1379 I have a DVD that won't eject in my iMac intel computer..any suggestions

I put a DVD in mi imac to burn, but now it won't eject, tried a variety of things,but no luck..any ideas?

Force eject a stuck cd/dvd
First try the normal methods to remove the disc. Drag its icon to the Trash can in the Dock or select 'Eject' from the File menu.
If you are running a virtual machine, e.g. VMFusion, ensure that the CD is disconnected from the virtual machine. This will sometimes allow the CD to now show up in Mac OS X.
Shut down the computer and start up whilst holding down the mouse button. This may take some time, but keep your finger on the mouse button right up until the disc comes out or the log-in screen has appeared.
If you have Toast Titanium installed on your computer, choose EJECT DISC from the menubar.
Sometimes you can successfully use the eject disc button in iTunes even if the disc is not visible to the Finder
Open Disc utility and choose the disc you wish to eject in the left-hand pane, then click on the Eject button.
Some Macintoshes have a paperclip hole that you can insert a straightened paperclip into, manually triggering the eject mechanism.
Open Terminal and type "drutil tray eject" to eject the disc/tray, and "drutil tray close" to close the tray.
If your computer has an eject button on the keyboard, restart the computer holding down the Option key. When the startup disk selection screen appears, let go of the option key and press the keyboard's eject button.
Source: http://guides.macrumors.com/Force_Eject_a_Stuck_CD_or_DVD

Mounting Windows shared disk - getting stuck; won't eject?

I'm sharing the C: on my windows 2000 server machine, on the network. Most of the time I can mount and eject the volume just fine.
However, sometimes it gets "stuck". Meaning, I can mount it once, then eject it, but when I try to mount it again, i get the ?-mark over the drive. I go to relaunch Finder, and the volume is still there, but it won't eject. I can browse it still, but every action I try seems to not cause it to eject. I have to reboot to get it to clear off.
Is there a way to force a volume to eject? Am I mounting my drive wrong in the first place? Is there a proper way to eject a volume? Thanks.
Ryan

bump.
it seems to do it more after i wake the macbook from sleeping...

I inserted what I thought was blank DVD-R/W to verify. It won't eject.

I inserted what I thought was a blank DVD-R/W to verify. It won't eject.
I have an appointment for tomorrow in the evening to remove DVD-R/W disc at the Grove in L.A.
Phone support declined to assist without $19.00 charge.

Restart the computer and hold the trackpad until the dvd is ejected.
Best.

HT2622 I have inserted a DVD into my minimac and now it won't eject. Is there an override for this?

I have inserted a DVD into my minimac and now it won't eject. Is there an override for this?

Try this discussion > https://discussions.apple.com/message/19931572

Dropped MacBook won't eject DVD-Any ideas?

I dropped my MacBook and it landed flat on its back. Fortunately, all seems to be working fine (few) except that it won't eject the previously loaded DVD. I'm open for any suggestions that might remedy this situation, before taking it in to a repair shop.
Thanks, Becky

Five ways to eject a stuck CD or DVD from the optical drive
Ejecting the stuck disc can usually be done in one of the following ways:
1. Restart the computer and after the chime press and hold down the left mouse button until the disc ejects.
2. Press the Eject button on your keyboard.
3. Click on the Eject button in the menubar.
4. Press COMMAND-E.
5. If none of the above work try this: Open the Terminal application in your Utilities folder. At the prompt enter or paste the following:
/usr/bin/drutil eject
If this fails then try this:
Boot the computer into single-user mode. At the prompt enter the same command as used above. To restart the computer enter "reboot" at the prompt without quotes.
If no success take it in for repair. You may have to repair or replace something to fix the problem.

Dvd either gets rejected or won't eject

Similar Messages

Maybe you are looking for