DVD error -224

初めてPremiereProを使って、mpgファイルをDVDとして作成しようとしています。
編集などを済ませて「DVDへ書き出し」を行うのですが、書き込み途中に
[DVD error -224]
という表示が出て、DVDの書き込みが失敗します。これで2枚無駄にしました(泣
googleなどで調べるとこれに似た症状が報告されているのですが、どうも日本語・英語どちらでもない言語で書かれているのでよくわかりません。
本当に困っています。どなたかわかる方がいらっしゃれば是非教えてください。

ご意見ありがとうございます。お返事が遅くなり大変申し訳ありませんでした。
私なりにいろいろ調べたのですが、どうもDVDドライブ自体がおかしかったのが大きな原因だったようです。
または6GBほどもあるmpegファイルを「シーケンス」を使わずに書き込もうとしたので、フレームレートを落としたとはいえ、大きすぎるファイルに対するエラーであったのかもしれません。
とりあえずドライブを換えることによって無事に書き込みができました。ありがとうございました。

Similar Messages

  • DVD Error - 27303..HELP...

    hi everyone, i'm a beginner of encore DVD.
    i've done a simple task, when i burn it to DVD..
    an error appears:
    Unexpected files were found in the AUDIO_TS or VIDEO_TS directory
    (DVD Error - 27303)
    may i know what happened?
    i'm using encore 1.5.
    contains 13 menu (including motion menu) & 123 timelines.
    also working with a playlist...
    by the way, wanna ask 1 more question:
    any limitation in encore? i mean..
    about the number of timeline, menu, buttons or so..?
    thank you very much...(crying)

    Some links I've saved... (haven't looked in awhile, do note that links sometimes go away on servers)
    General DVD Authoring Information and Tutorials
    Wikipedia
    and
    VideoGuys
    and
    VideoHelp
    and
    at Encore
    Encore Tutorials
    http://www.stevengotz.com/
    http://www.doogs-tutorials.com/
    http://www.adobe.com/designcenter/
    Workflow
    http://www.adobe.com/go/vid0239
    Quicktime Movies
    http://www.adobe.com/designcenter/encore/articles/encttstart.html
    http://www.adobe.com/designcenter/encore/articles/enc15ttdeeper.html
    http://www.adobe.com/designcenter/encore/articles/enc15ttall.html
    http://www.adobe.com/designcenter/encore/articles/enc15ttstring.html
    http://www.adobe.com/designcenter/encore/articles/enc15ttworkspace.html
    http://www.adobe.com/designcenter/encore/articles/encttburning.html
    http://www.adobe.com/designcenter/encore/articles/encttlinkeff.html
    http://www.adobe.com/designcenter/encore/articles/enc1ppassemble.html

  • Dvd error.  (-70012)

    dvd error.    (-70012)  Initialization error

    https://discussions.apple.com/thread/5568408
    Also see "More like this" on the right hand side.

  • (DVD Error -1) Encore DVD 1.5

    Que tal. Tengo tiempo usando Encore DVD 1.5 y de pronto empezó a lanzarme un "DVD Error -1" al momento de mandar el proyecto a folder. Lo raro es que los proyectos exportados previamente (ya hasta quemé en DVD)ahora tampoco puedo exportarlos. En cualquier cosa que deseé exportar en Encore me manda este error, así sea un clip sencillo sin menú ni nada. Pasé el proyecto a mi otra computadora y ahora tampoco en esa puedo exportar nada. Como decía, incluso proyectos anteriores que ya habían sido previamente exportados. Ayuda por favor, no encuentro nada en internet que hable de mi caso. Gracias. Cualquier cosa pueden contactarme a mi correo [email protected] Gracias.

    I'm basically having the same problem, I do know that for me AVI files wont work, so I had to switch over to WMV, but I am having the same problem with the unidentified error while building the project.

  • Encore 1.5 DVD Error 9983

    I'm trying to burn a project on my new Blu-Ray burner (LG Modisc BD Rewriter), but Encore 1.5 keeps popping up with this error: Device Error - Uninterpreted Error (DVD Error - 9983)
    Anyone know what exactly that error means?  I'm wondering if my new Blu-Ray burner is just incompatible with Encore 1.5?

    Try this:
    http://sony.storagesupport.com/node/6563
    Looks like a burner/media error.
    You can check to see if Encore is the problem by building to an iso, then burn to disk using ImgBurn (for PC).
    http://www.imgburn.com/

  • No Video Decoder available for this stream type (DVD Error -47003)

    Hi all,
    I am so confused, I have never had these sorts of issues before, now nothing works. In premiere pro I export a video as Microsoft DV/AVI, the compressor is DV(NTSC), pixel aspect ratio is D1/DV NTSC (0.9). Audio is uncompressed 48000Hz, 16 bit sterio.
    When I import into Adobe Ecnore 1.5, all is fine untill I try to place chapters into video, no video in monitor window, and when I preview the whole thing and click on one of the buttons in my project I get the following error (Video Decoder available for this stream type (DVD Error -47003), and the screen is black.
    Any help would be great.
    Anthony

    PPro/AME is using the Main Concept Encoder - in the Format menu there are three varieties of MPEG2 - but of course, they are not QT and I was being sloppy (and ignorant) in my description!
    I have now tried as well, per your suggestion, DV AVI and uncompressed AVI, both generating the same error unfortunately - and again I tried an Animation QT, but same again.
    The most bizarre thing is that the odd clip that does work I now find is 768x576 - I really can't understand why Encore is even letting that through the door, never mind previewing it. I just tried deliberately exporting one from PPro, but of course as expected Encore said it was the wrong size.
    I rolled QT back to 7.1 - same error. Could roll back further I guess.....
    The reliance on QT movies is largely my preference and habit I guess - all my work is cgi. In the first instance image sequences taken into After Effects for comp - writing them out from there as QT movies uncompressed/Animation, or Sorenson 3 for client preview is just something we are used to.
    It does suck but I am close to resigning myself to following your suggested route of burning RW discs and testing them that way - annoying and frustrating.
    One thing I have left is to move Encore to my other machine, a leaner and faster box that I use for my 3D work - as there's less on it perhaps it may be easier to pin down what is breaking the preview.
    I have found reports of this error going back to 2005, but no solutions - like the first two posts, people seem confounded and unable to pin down a reason for it. Adobe's knowledgebase contains no result when I enter the exact error line either.
    I'll see what I can find and come back to this thread with results positive or negative. Meantime I suppose I might be looking at upgrading after all....the problem is I have sufficient Adobe products that I should be, for economy sake, looking at one of the suite upgrades - I've already seen that's around £1,300, which firmly puts me between the proverbial rock and hard place!
    Your help, Jeff, is much appreciated and I will post back on this thread when I have something, hopefully within a day or two.
    Julian.

  • Invalid Requested Time (DVD error - 19004)

    Please somebody know how to avoid this error I have made all the changes that I think can help me but it still happening, changed names, routes, changed project and assets locations, remake menus, etc etc I'm desesperated I really need a good solution, thanks.

    Please have a look at
    Invalid Request Time (DVD ERROR - 19004) HELP?

  • Encore DVD Error Message - "End of Stream has been reached"

    I have created a project In Encore 2. it has motion menus, subtitles and sound. When we go to preview the project it gives us this error
    "End of Stream has been reached"
    We have checked our assets and the audio and video are DVD standard.
    We did a check project and it found no errors with the project.
    We are running Windows XP SP2 on a network, 2GB memory, 200GB hard drive Dell OptiPlex Desktop
    Dose anyone know what we should do???

    The End of Stream Message can be solved by removing one or moor unwanted elements from the time line. in my case that was a jpg image that encore didnt liked.
    It is very difficult to find out witch element you need to remove, but that is the only solution.

  • DVD error message when burning

    Hi there all,
    When I try to burn a DVD using Toast Titanium, I keep getting this message, it's been going on for a week or so now!
    Message reads: "The drive reported an error:
    Sense Key = MEDIUM ERROR
    Sense Code = 0x73, 0x03"
    Any ideas/thoughts?
    Thanks
    Peter

    This is the discussion area for the iMac G4. It appears that you have an iMac G5. You should post your question in the iMac G5 discussion area.

  • DVD Error (help!)

    hallo. the reason i am writing today is because i am getting the following error message when i insert a dvd that i just rented from my local retailer:
    "You have inserted a disk containing no volumes that Mac OS X can read. To continue with the disk inserted, click ignore."
    i don't understand why this is coming up all of a sudden. i just played a few other dvd's last weekend and nothing bad at all happened. my retail cd's play nicely in the drive, i also have no problems playing burned cd-r's, and no problems burning them in itunes. as this isn't a superdrive (i have a combo), i cannot burn dvd's, so this isn't related to burning--only playing.
    normally when i insert a dvd, the player automatically comes up and starts playing, per my system preferences (which i've checked and they are still the same). now it isn't launching at all. when i manually launch the player, everything about it is fine, but it doesn't "see" that there is a dvd inserted in the drive.
    i thought that maybe it was because it was the wrong region coding, but the dvd i'm trying to watch is region 1. then i thought it was because it was dirty, but when cleaned the same thing happens. then i tried playing a dvd of my own that i know should work because i've watched it a million times w/o any problems, and i get the same message (my dvd's are kept crystal clean).
    i am using a 12" powerbook g4 with (now) os x 10.3.9 (just upgraded this morning--was prev. using 10.3.4 i think???). in the system profiler under "ata" it's reading that there is a matshita cd-rw cw-8123 drive, and under "drive type" is "cd-rw/dvd-rom" so i don't see anything wrong.
    i don't know if this has anything to do with anything, but the other day i updated my version of itunes to ver 6.0.2 using the system updater, tried to upgrade to quicktime 7 (the freebie on the apple website) but it said that it wouldn't mount (???) so i threw it away (i think it was because it requires 10.3.9 which i hadn't updated to yet), added disk utility to the dock so my roommate could deal with her cd-rw's (previous to this week my computer had only burned cd-r's), and downloaded macscan from securemac.com.
    other than quicktime, i had not encountered any problems of any kind during the installations and updates. then last night i tried playing the dvd and it wouldn't play due to the error above. i thought that maybe something got lost during the updates so i upgraded to 10.3.9 and that didn't help. then i upgraded to itunes 6.0.3 thinking that maybe something in the previous itunes upgrade killed my dvd drivers while they were asleep (itunes has been know to do things like that, you know!) and that didn't work. (can't say i'm totally surprised, it was a little far fetched...but itunes is pretty vicious.)
    now i'm plumb out of ideas. does anyone have any suggestions? has anyone else encountered this before? i'm really hoping to have my question answered here, as i'm sick with the flu and don't have the energy to call apple or run all over town trying to get this fixed. if somebody has a fix for this here, i'd really appreicate it. cheers all. kj.

    Hey Kristov,
    Reload OS X 10.4 from disc using the "archive and install" option. It will force you to choose between that and "erase and install," anyway. Repair disc permissions. Update all your software, but avoid the OS X 10.4.5 Combo update. Go to "Downloads" and get the update to OS X 10.4.4. Repair disc permissions again. Get the OS X 10.4.5 update and, again, repair disc permissions. Everything should work just fine after that. It may be that you can abbreviate the process I described, but after reading a bunch of posts both here, on Macfixit, and on Macintouch, I decided it was the only way to ensure the problem didn't recur. In fact, although I doubt it made a difference, I repaired disc permissions both after each download and after each subsequent restart to finish update installation. In any case, I now have all the latest updates and my machine is working better than ever, no kidding, including DVD Player.
    Good Luck,
    Jonathan

  • Recording to DVD Error

    I get the following error when I try to burn to a DVD.
    "this disc could not be verified and might be unreadable. Try again using a new, blank disc. (error code 0x80020063)"
    This happens at the end of the process. Looking at the disc after it appears that it was burned but maybe not finalized or something, I am not sure. Any one got any suggestions??

    Since the disc you're using is re-writable, how many times has it been erased and re-written? They do develop bad sectors over time. Verbatim discs are very good quality, so it could just be that the disc is wearing out. Avoid Memorex discs at all costs.
    I've also had some luck when doing a full erase rather than a quick erase. Your choice of burning software will determine whether you have these options or not.

  • HP Recovery DVD error "0130-UUF-AB4"

    1. HP G42-458TX NOTEBOOK PC
    Product Name: LD915PA
    2. Windows 7 Premium 64-bit
    3. error "0130-UUF-AB4"
    4. Installing on new hard disk.
    I have installation error problem " 0130-UUF-AB4" using HP System Recovery DVD bought from HP service Centre.
    Kindly please advise what should do the resolve this error?

    Contact HP Service Centre to arrange for a replacement recovery disk set set.
    What was the wording on the error message image on the right hand side of your last post? It is so small that it is unreadable
    Best regards,
    erico
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Arrrrggg!  I can't take it - DVD error messages & wasted disc!

    I'm sick of this - my super drive, while trying to burn backups of digital photos, goes through the entire burn process, burns the disc, only to give an error message 15 minutes later to the effect that the disc is unreliable, use a new one. This happens 2 out of 3 attempts while mysteriously the 1 out of 3 tries is successful. Also, 2 out of 3 times I put a blank DVD disc in it never shows up in the finder. I'm using the right disc (DVD-R 8x) and here's my drive info - please give me some helpful advice before I chuck my machine into the Chicago River!!!
    SONY DVD RW DW-Q28A:
    Firmware Revision: KAS7
    Interconnect: ATAPI
    Burn Support: Yes (Apple Shipped/Supported)
    Cache: 2048 KB
    Reads DVD: Yes
    CD-Write: -R, -RW
    DVD-Write: -R, -RW, +R, +RW, +R DL
    Burn Underrun Protection CD: Yes
    Burn Underrun Protection DVD: Yes
    Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
    Media:
    Media Type: DVD-R
    Blank: No
    Erasable: No
    Overwritable: No
    Appendable: No

    Hi,
    The 'superdrive'(actually a Pioneer DVR-107) in my G5 Dual 2.0 was giving me problems similar to yours. My solution was to buy a Pioneer DVR-111, everything works like it should now. Oh, the price was about $35 for the new DVR and 15 minutes work installing it.
    Go here to see Apple DIY instructions about how to do the swap:
    http://www.apple.com/support/diy/
    Regards,
    Dave

  • External dvd error

    I have an external DVD drive connected to my mac. I am burning my IPHOTO library to DVD. Everytimte I burn a DVD, it take a really long time to complete. And I get this error...
    The disc did not verify correctly and is unreliable. Because this disc is unreliable, discard and try using a new blank disc. ( Error code 0x80020063).
    I tried the disc and it seems to work fine.
    Any ideas why I am getting this meesage.
    the disc's are TDK +R
    I have e BENQ dvd burner that I pulled from my old PC and put it in an external enclosure and connected it via USB.

    There are a couple of causes for this error:
    Bad media. try another brand, such as Verbatim, and try burning at a lower speed. Memorex and 16X can both cause problems.
    Data changing while the disk is being burned, so the verify pass fails. e.g. if you use iPhoto while burning the disk.
    In either case you should not trust the disk, even if it seems OK.

  • Burning a DVD - error message

    I get the following error message when I attempt to burn my DVD:
    "There were errors during the project validation that have to be fixed before burning the project."
    I am not sure what I have to do to correct this.

    Did you already read this procedure?
    http://boinx.com/fotomagico/support/tutorials/dvdtutorial/#basics
    http://cdn3.libsyn.com/cmeermann/TC008-Fotomagico.mov?nvb=20081115183200&nva=200 81116183200&t=0cdc802f2dff2cfd746f9
    From iDvd's Help Menu:
    Each iDVD theme comes with a specific style of menu buttons, but you can customize them in several ways. You can give the buttons a shape to which you can add video clips, images, or even slideshows. You can change the typeface, size, style, and color of the button label text. You can also create buttons without a label or buttons that are text only. You can even make each button that appears on a menu different by mixing styles for an interesting visual effect.
    Message was edited by: SDMacuser

Maybe you are looking for

  • How to use a WebService Model with String Arrays as its input  parameter

    Hi All, I am facing the following scenario - From WebDynpro Java i need to pass 2 String Arrays to a Webservice. The Webservice takes in 2 input String Arrays , say, Str_Arr1[] and Str_Arr2[] and returns a string output , say Str_Return. I am consumi

  • How to convert Oracle Data into Java Date

    Hi there, in JDev 3.2 oracle.jbo.domain.Date was derived from oracle.sql.DATE, which has a timestampValue() method to get a java.sql.Timestamp. In Jdev 9.0.3 Date is not!! derived from oracle.sql.DATE, so my previous implementation fails. So, How can

  • Table is taking time load.

    Hi, Jdev 11g. I have a vo (userdefined query) and I have dropped that as a table on my jspx page. Bydefault, it will not any rows. On click button, it will get the data and load the table. Issue, On page load it is taking lot of time to load the empt

  • Solaris 9 compatble hardware

    Hi, I am planning to buy a new motherboard to install a solaris 9 OS. When i look to HCL list in sun website, i found the montherboard GA-81PE1000 is compatible to install but which is not available in the market. when i enquired in the Computer shop

  • Iphone 4 will not turn on after restore

    Have performed a full restore of my iPhone 4 using iTunes, including software, firmware and my last backup. Now will not turn on by any combination of sleep/awake, on/off buttons and connected/disconnected to power.