DVD errors since connecting new external drive-coincidence or problem

I've connected an external drive to home unit to store footage. I feel this external is a little slow compared to my Mac but not sure how to find out.
Anyway, I create mpv files for DVD authoring. Same process as always EXCEPT the external housed footage. Build DVD as always. Now my boss has these DVD locking up or pixelating. Yet, if she plays an older disc it still works fine in her system. Her other DVD player sometimes does not recognize the disc. I've even created the mpv files and went to FT work to build the disc. It eliviated the problem but did no cure it.
This problem does not happen on all discs.
All these problems happened with the very next disc and almost all the discs that have been involving the external. Coincidence or problem.
I intend on getting a LaCie external to use. We use them at FT job and never a problem. But until then:
I'm thinking of creating a QT file on the Mac hardrive and then compress.

This might be helpful:
http://discussions.apple.com/thread.jspa?messageID=8329630&#8329630

Similar Messages

  • DVD authoring problems since adding external drive-coincidence or problem

    I've connected an external drive to home unit to store footage. I feel this external is a little slow compared to my Mac but not sure how to find out.
    Anyway, I create mpv files for DVD authoring. Same process as always EXCEPT the external housed footage. Build DVD as always. Now my boss has these DVD locking up or pixelating. Yet, if she plays an older disc it still works fine in her system. Her other DVD player sometimes does not recognize the disc. I've even created the mpv files and went to FT work to build the disc. It eliviated the problem but did no cure it.
    This problem does not happen on all discs.
    All these problems happened with the very next disc and almost all the discs that have been involving the external. Coincidence or problem.
    I intend on getting a LaCie external to use. We use them at FT job and never a problem. But until then:
    I'm thinking of creating a QT file on the Mac hardrive and then compress.

    AndyPeardrop wrote:
    I use the drive to run FCP and DVD Studio Pro.
    Do you mean you have the apps on external drive? = BAD
    or just using the external as media drive? = good

  • New External Drive connected to Time Capsule moving files problem

    I have a late 2009 13" unibody MacBook Pro, that I primarily use for video editing/converting. I use my Time Capsule as a network through which I can connect to my external hard drives via USB for videos and such. I've used at least two other external hard drives along with my Time Capsule for a year and a half with very few problems, aside from the inevitable crash of one. Before yesterday, I had a 1TB Western Digital MyBook (http://www.wdc.com/en/products/products.aspx?id=210) and a 2TB Verbatim Desktop HD (http://www.verbatim.com/prod/hard-drives/desktop/usb-2.0/) connected through my 1TB Time Capsule and aside from the Verbatim drive being rather sluggish most of the time, everything was working fine.
    Yesterday, I got a new external drive, an iOmega MiniMax 2TB (http://go.iomega.com/en-us/products/external-hard-drive-desktop/ultramax-minimax /minimax800/?partner=4760). I spent yesterday and most of today moving files around and whatnot through a wired connection (iOmega via firewire 800, Verbatim via USB, MyBook via USB, and Time Capsule via Ethernet), and everything moved quickly and without any problems.
    I hooked my Time Capsule up to my modem, plugged in the iOmega and Verbatim drives via USB to the TC, and started my laptop. When I opened the drives, everything was working fine... And then I tried to move a file to the iOmega drive... I was moving an episode of The Killing. I dragged it into the folder and went to Safari to look something up and suddenly realized ten minutes later that I still hadn't heard the noise telling me that the file had finished. I looked at the move dialogue box and it said "156.8 MB of 323.8 MB - About 10 Seconds". I watched it for another ten minutes and it didn't move. So I clicked cancel move and the rainbow wheel of death came up and I had to force reboot my computer.
    When I restarted, I opened up finder to access the drives through my Time Capsule, and it "failed to connect" to my Time Capsule. So I went back into my office to flip the switch on the surge protector in order to restart the process. I turned on my computer and I had no problem accessing my hard drives... Until I tried to move an episode of United States of Tara into the iOmega hard drive. This time, it said, "192.5 MB of 202.6 MB - About 5 Seconds" and completely stopped moving again. And the same thing happened when I clicked the little grey "x" to cancel the move.
    I repeated the process several more times with no luck. Then I thought it might help to see if it does the same thing with documents. So I dragged just a random document to the iOmega and it took about 30 seconds, but it did it successfully. So I tried to move the episode of The Killing again and I let it go for, like, 25-30 minutes. After this time, I got a notification from finder saying, "Finder cannot complete the operation because some data in "[the file]" can't be read or written. (Error Code -36)". Then when I went back into the "Shared" part of the sidebar to go back into my Time Capsule folder, it said "Connection Failed"
    So what exactly does this mean? Are the Time Capsule and iOmega not compatible? Can I only move the files through a wired connection [which would be unfortunate]? Do I need to rejigger the USB configuration? Is the error code just for these two episodes and it's just a random coincidence that it happened the day after I got a new drive?
    Thanks for any help anyone can give me!
    - Alex

    I have attached the macbook to the tc via ethernet cable. Should I turn off my wireless connection or will itunes recognize to go with the faster connection on it's own?
    You MBP will try to connect based on the order of the list of network devices on the System Preferences > Network window. If Ethernet is not at the top of the list, then go ahead and temporarily disable AirPort.
    After all this is done will the wireless connection be fast enough for normal itunes operation?
    For audio streaming it should be, but just be aware that your iTunes host will have to get the audio source wirelessly from the TC, which in turn will have to get the data from the USB hard drive. Finally, the iTunes host will have to wirelessly stream the iTunes audio via AirTunes to the AirPort Express.

  • Using Disc Utility to copy my hard drive to a brand new external drive and am having the error "Unable to create...(Cannot allocate memory)".

    I'm not very tech savvy but am trying my best to use Disc Utility to copy my hard drive to a brand new external drive and am having the error "Unable to create...(Cannot allocate memory)".
    Last night no problems, woke this morning and it was freezing so I forced a restart and got the grey screen with the folder and question mark. Ran off to best buy to get an external drive... Please help! Thank you!

    I have done both. When I hold down the "C" key it pauses for a few seconds while the cd spins and then the flashing folder icon appears.
    Could be you have the wrong cd/dvd.  The mac will only boot a supported cd/dvd for your machine. The flashing question mark indicdates your machine could not find a valid os.
    When I hold down the "option" key for the startup manager the cursor comes up and moves but the actually manager doesn't come up no matter how long I leave the laptop on.
    Not sure.  Could be your machine does not support the startup manager. You would think the machine would ignore the key.
    Where did you get the dvd?  What is the number on the DVD?
    What machine do you have anyway?
    This site provides more information, but lacks security.
    "A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
    http://www.appleserialnumberinfo.com/Desktop/index.php
    or
    This site provides more information, but lacks security too.
    "A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
    http://www.appleserialnumberinfo.com/Desktop/index.php
    http://www.chipmunk.nl/klantenservice/applemodel.html
        ( hint by K Shaffer  )

  • Losing connection to external drives, tried disc utility got a message "No live updatin...? Retried new connections; is there a way to test the external usb hub?  The drives will occasionally display in Apple profile.  Any help would be deeply appreciated

    Losing connection to external drives, tried disc utility got a message "No live updatin...? Retried new connections; is there a way to test the external usb hub?  The drives will occasionally display in Apple profile.  Any help would be deeply appreciated

    It's not just you, I can't authorise my phone. It seemed to go down just after I started the update (it wasn't my fault though). I am using chrome, and it does not seem to be a firewall issue, or the bannerblock issue that I read about else where, since I dont have that program installed. Strange though how the support forum is still running. If I go to http://www.apple.com/support I get nothing, but googling topics allows me to see em.

  • How can I force Time Machine to make a complete backup of my Hard Drive.  I just installed a new external drive for Backup since my previous one failed.  Now when I back up, Time Machine only backs up my data folder and the Users folder.

    How can I force Time Machine to make a complete backup of my Hard Drive.  I just installed a new external drive for Backup since my previous one failed.  Now when I back up, Time Machine only backs up my data folder and the Users folder.
    When I start a backup. Time Machine says "Oldest Backup: None; Latest Backup: None", so it seems like it should do a complete backup, but it only does a partial. 

    Hi I'd like to jump in here. Your app showed me this:
    Time Machine:
              Skip System Files: NO
              Mobile backups: OFF
              Auto backup: YES
              Volumes being backed up:
                        Macintosh HD: Disk size: 749.3 GB Disk used: 453.81 GB
              Destinations:
                        Plastic Wrapper [Local] (Last used)
                        Total size: 999.86 GB
                        Total number of backups: 64
                        Oldest backup: 2013-07-24 23:25:11 +0000
                        Last backup: 2013-11-17 01:40:47 +0000
                        Size of backup disk: Too small
                                  Backup size 999.86 GB < (Disk used 453.81 GB X 3)
              Time Machine details may not be accurate.
              All volumes being backed up may not be listed.
              /sbin excluded from backup!
              /usr excluded from backup!
              /System excluded from backup!
              /bin excluded from backup!
              /private excluded from backup!
              /Library excluded from backup!
              /Applications excluded from backup!
    Aside from the size of my backup drive, which I will increase at some point, I'd really like to have time machine backing up all system folders, especially Applications. How to I reset this hidden exclusions?
    Thanks,
    Darcy

  • How to move Event (not necessarily connected to Projects ) and projects to new external drive

    I am running Snow Leopard 10.6.8 and iMovie11 9.0.4 have a had very stressful time trying to clear down the Movies folder from my internal drive and get it across to a new external hard drive, as my 700gb drive on my 2009 iMac is practically full. I have taken a full back-up and also created a new 1.5 TB partition on the external drive. However I do not know how to get the Events and Projects across, and for iMovie to know that every thing is now on the new drive.
    Initially I copied the 2 folders using finder, which seemingly worked but then I discovered that iMovie did not display the the new events, so I deleted the 2 folders from the external drive and tried manually moving the events in iMovie. This was very slow, with lots of spinning wheels and eventually iMovie crashed. So I moved the new Event copies I did manage to create into trash, but still iMovie was crashing.
    I then, thinking something had become corrupted, I  tried to restore the Events folder and Projects folder from my backup, but that did not work as I got a message saying the there was not enough space to do the copies (why does it need extra space as I assume it would be overwriting the existing folders ?). So in desperation I did some forum searching and ended up deleting the com.apple.iApps.plist. Now iMovie seems to be working fine, and is displaying al the events from my internal drive (I have ejected all other drives), and I am back to square one (hopefully), however for some reason the 'month' folders I had previously created in each Event 'Year' have disappeared and all the, for example 2013 events, are now under the 2013 folder with no Month sub folders( I assume this is something to do with the preferences I had deleted ?)
    I am hoping someone can direct me on the right path for getting the Events (not all of which are used in Projects) and Projects across to the new external drive, so I can free up space on the internal drive (and install Mountain Lion - my end goal).
    I have been  trying to do all this since 0600 this morning, so if anyome can help it would be very much appreciated.
    Jim (now grabbing a much needed beer !)

    Do the external drive show up in iMovie 11?? I just drag and drop in iMovie and don't touch it or change in finder.

  • My time machine backup external hard drive has failed.  I have a newer external drive already connected to my MAC but can't figure out how to get Time Machine to set up on it?

    My time machine backup external hard drive has failed.  I have a newer external drive already connected to my MAC but can't figure out how to get Time Machine to set up on it

    http://pondini.org/TM/21.html

  • Can I transfer photos from old macbook to iMac and put all photos on a new external drive without losing any photos?

    Had to purchase new Macbook so all devices could sync with Yosemite.   I use iMAC and Macbook with iPhone, etc.  I have many photos over years and do scrapbooking.  I want to preserve my pix on an external hard drive and organize them.  I am currently using external drive on iMAC and a separate one on Macbook that is outdated.  I use them with TM for backup.  Can I transfer pix data only to the iMAC via a transfer cable and then send all photos to new external drive for access and safe storage?  I am confused about backup not preserving my photos.  Help please me transfer and save my pix and properly set up my external for access.  Thanks a bunch!

    connie,
    I assume you are storing your photos in an iPhoto library, since you are asking in the iPhoto forum?
    if you want to store your iPhoto library on an external drive and keep them safe, you need two external drives.  One drive to store the working copy of the photo library, that you are using to work with your photos,  and one drive for time machine to make back copies of your iPhoto library.
    Can I transfer pix data only to the iMAC via a transfer cable and then send all photos to new external drive for access and safe storage?
    You could simply plug your new drive into the MacBook and copy the library from the old drive to the new. Then connect the new drive to your iMac and use the iPhoto library there.
    Make sure, your new drive has the correct file system - MacOS Extended (Journaled) .  See this link:  iPhoto: Issues with FAT32-formatted drives
    -- Léonie

  • Can't connect two external drives via USB hub to the same port.

    I have two external hard drives connected to my MacBook Air, along with other USB devices, using a powered USB hub. When I connect both external drives to the same port via the USB hub, one of them disconnects with an error message saying it was improperly disconnected. The same thing happens when I connect one of the hard drives and an external DVD drive via the USB hub. The two drives work fine when connected to separate ports. Other USB devices coexist with one of the drives quite happily. Can anyone explain why this is?

    External drives may well require more power than a port can supply. Also, many USB hubs cannot be used for external drives. It's always best to connect an external drive directly to the USB port. If the drive enclosure has a second USB port on it, then you can daisy-chain a second drive to the first, sometimes.

  • I would need to connect an external drive to my iMac computer?

    I have an iMac hard drive that was purchased 1 year ago from the Apple Summit Sierra store in Reno, Nevada. I have had a lot of issues so this drive was replaced by a new one.  The old hardrive contains OS 10.5.x and has appleworks which I created a lot of documents. 
    The Apple Summit's Genius bar installed OS 10.6.8 onto the new hard drive and now, I am NOT able to open those files that were created with the appleworks software that resided on the old hard drive. I notice that appleworks was replaced by Pages which will not open appleworks files.
    So this is what I am asking the community...
    1. I would like to connect the old hardrive as an external drive so I can open these documents. What is the best way to do this?  Someone mentioned that I would need a "sled" which I suspect is an external casing that has it's own power and connects via USB.  I don't recognize the type of plug that I would need.
    2. The old apple computers could start up from the external hardrive connected to it. Is this still possible with the newer intel computers?
    I would appreciate anyone's suggestions or input.  Thank you...

    To use the HDD as an external drive you need and external drive enclosure. It would connect with your computer via USB or FW; my preference is to have it set up for both for flexibility .Check your computer ports to see what you need.
    When you buy the enclosure check to see whether it comes w/ the cables you need.
    A good source to check for the HD enclosures is: http://www.macsales.com/ If you're not sure of what you need just call them; they're very helpful.  There are other sources for these but OWC is my favorite.
    Your old HDD is probably bootable. Once you have the drive in the enclosure connect it to the computer.
    You can get some data, etc. from the old HDD to the new drive by clicking the ext. HD icon on the desktop to open & dragging whatever you want (or Copy/Paste) to your new HDD.
    Alternatively you can set the external drive as Startup Disk:
    Go to System Preferences>> Startup Disk.  Your new external drive should show there. Click on new drive and Restart. When the computer has rebooted the external HDD (with old HDD) will now be  the Startup Disk. Until you change it again in System Preferences.
    Do you have the appleworks software disks?  You could install that on the new HD, and just move the files from the external HD to the new drive---or is that part of the plan?
    Good luck w/ this.
    Message was edited by: epass

  • Error -10810 after trying to relaunch finder. External drive may be problem.

    I bought a 3TB Seagate external drive a couple months ago and ever since then after a day or so of use, any application on the drive would stop working and the drive would become unresponsive. Ejecting it safely is impossible and if I try to open the drive in Finder, Finder becomes unresponsive and relaunching it gives the message "Finder cannot be opened -10180".
    Pulling the USB cord that connects the external drive gets Finder back up, but it of course damages my hard drive. I've been dealing with this for months by holding the power button every time this happens and forcing the mac to shut down. When I start it up again everything works fine for the time being but I'm at my wits end with this problem now.

    Don't know what else to suggest. The problem is with your external drive, either the file structure or the drive itself. How are you formatting exFAT? If using your Mac, try formatting using a PC.

  • Incorrect project dates after moving to new external drive

    I'm running iMovie 09 8.0.5 and Leopard.
    I have moved projects from my macbook internal drive to an external drive by dragging them within imovie. I picked move both projects and events. Both projects and events moved. I can play the project from the new external drive. The dates on the events are correct, but the dates on the projects have changed to today's date. Since I have 50+ projects, they are not sorted properly. The project on my internal drive are grouped by year. How do I get this on the external drive? I can find no way to set the project date within iMovie.

    An update. I've figured out a workaround.
    First of all, you must created folders yourself in the project library for the external hard drive. That is done by right-clicking on the external hard drive in project library. I must have done that a long time ago for the internal hard drive.
    Second changing the date associated with the project itself is tricky. It is governed by the modification date of the Project file within the project itself. You can't see this file without using "Show Package Contents" in the finder.
    The easiest way to change the modification date is using the terminal and touch command.
    I have a external disk named Home Videos Primary 1000 GB
    The project name is 2007 Christmas Rocket
    and the correct terminal command is
    touch -mt 0801040000 /Volumes/Home\ Videos\ Primary\ 1000\ GB/iMovie\ Projects.localized/2007\ Christmas\ Rocket.rcproject/Project
    I entered this command this by typing touch -mt -0801040000 (followed by a space) into the terminal window and then dragging the aforementioned Project file into the terminal window (which provided the correct path).

  • When I connect an external drive I'd like to run a program which is on it. How could I do that?

    When I connect an external drive I'd like to run a program which is on it. How could I do that?
    I tried automator, but without success.
    Thanks

    Interesting question.  Others have provided the direct answer (no, massive security hole), and a little time with a search engine finds various existing discussions of autorun-related topics (eg: here and here and here), and a link to the Do Something When tool, and there is the DeviceListener example in the Xcode kit and to adding a folder action where the volumes are mounted.  See the topics for details.   Haven't tried this stuff, though.

  • External hard drive that stored music has crashed.  How can I safely get my songs from my I Pod back onto computer in a new external drive?

    External hard drive that stored music has crashed.  How can I safely get my songs from my I Pod back onto computer into a new external drive?

    See this older post from another forum member Zevoneer discussing different ways to copy content from your iPod back to your PC.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    B-rock

Maybe you are looking for