Dvd feed not working

My macbook pro (15" mid 2012) has suddenly stopped feeding a DVD into the drive.  I have a 2.3GH intel core i7 running on OS X 10.9.4.
I have already tried restarting my macbook but no luck.  Any suggestions would be hugely appreciated.  Thank you.

Hello jogallivan,
The troubleshooting steps detailed below can help restore functionality to your SuperDrive.
Doesn't accept discs
Be sure to check your disc to make sure it is flat. You can check this by putting the disc upside-down on a flat surface. If the disc is bowed up on any side or in the center, do not use the disc because it might get stuck in the drive. Do not use discs that have anything attached to them or dangling from them (such as "sweeper" or cleaning discs).
If the drive struggles when you put in a disc or stops part-way, carefully look at the disc for labels that may be interfering. If there aren't any raised labels then try putting the disc in a few more times.
Try another disc to see if the issue is being caused by a specific disc.
Make sure you insert the disc far enough for the drive mechanism to activate. You need to insert discs nearly all the way before the drive will activate and pull them in. If you don't completely insert a disc, the drive will reverse and push the disc back out.
Allow the drive one or two seconds to accept the disc while it is fully inserted.
Reset the System Management Controller (SMC).
If the drive repeatedly does not accept discs, contact Apple or an Apple Authorized Service Provider, or make an appointment with an Apple Retail Store.
Apple Computers: Troubleshooting the slot-loading SuperDrive
http://support.apple.com/kb/HT2801
Cheers,
Allen

Similar Messages

  • DVD is not working in my laptop! HELP! Satellite L305D-S5938

    My DVD is not working in this laptop, it should be right?
    I thought this model can play DVDs AND CDs 
    Again my laptop is Satellite L305D-S5938
    Please help why it is not playing DVDs.
    Thank you

    Thank you for using the Toshiba Laptop Forums. Since there have been no posts to this thread in several days, it is being marked "read only" as part of our routine message board maintenance.
    If you still need assistance, please feel free to post a new message or contact the Toshiba Customer Support Center at 1-800-457-7777.
    Chico

  • Dvd drive not worked properly

     i have  hp pavilion dv4 series.my dvd drive not worked properly.for that purpose only i went 7 times in your service centre but they won't take action  till now .why u people do like this .i want explation and just change my  dvd drive that's all.

    tcrite,
    Sounds like a bad drive...I would get a replacement. According to Accelerate Your Mac database, it should work without issue.
    Just enter the model number of the drive and select your Powerbook G3 2000, and you will see four reports on this model.
    http://forums.xlr8yourmac.com/drivedb/search.drivedb.lasso

  • Cd/dvd player not working

    my cd/dvd does not work  it does not appear on the the computer list of drives
    does it need reinstalling ? if so how  do i do it
    This question was solved.
    View Solution.

    Hi,
    First, try the automated fixit from Microsoft on the link below.
    Windows 7
    Vista
    Check if the drive is now working.
    If it still doesn't work, click the Start Menu, open All Programs, open Accessories, right click the Command Prompt and select 'Run as Administrator'.  In to the prompt type the following command and hit enter.
    sfc /scannow                 ( note that there is a space between sfc and the / )
    Let the process complete, then type exit and hit enter. 
    Next, click the Start Menu, open the Control Panel and click on Device Manager.  Next click to open DVD/CD-ROM Drives.  Right click the drive and select uninstall.  Do not delete drivers if asked.  When the device has uninstalled click on the 'Scan for Hardware Changes' icon ( usually just below Help on the toolbar ).  Let windows reinstall the drive and see if it now works.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • I have lost the password and the DVD is not working on my old mac G4 500mhz, how can I get back my password?

    I have lost my password and the DVD is not working on my old mac desktop G4 500mhz. I have tried use the boot up disk to change the admin password. But the DVD did not work. ( I did not touch this machine for years.) But i need retreive something , so I have tried the shell script in the terminal
    1. fsck-y and the mount-uw to try to change and find the service directory's plist to change the password. But after I get the mount -uw, it show illegal option message.
    What I can do now to solve this problem? in shell script or any other way?
    Thx in advance.
    Alfred

    Hi,
    A DVD drive that is not working after many years not used:
    most probably dust on the little laser lens.
    Take the drive out and if you can reach this lens: clean it with pure alcohol on Q-Tip.
    Many people throw away cd or dvd players all the time because they stopped working, and very often it can easily be fixed by cleaning this lens.
    I used to have a G5, where I couldn't access that lens. It was very sensitive to dust.
    I have fixed it several times with compressed air. One time I didn't have canned air, but a bikepump did the trick.
    If you have another mac, I'd try to access the G4 internal disk with firewire target disk mode.
    good luck

  • Mysites Activity feed not working

    Hi,
    I have restored Mysite Content database.After restoring it, Profile pictures coming correctly but activity feed and trending tags not working(coming blank).
    After restore db i did following:
    IIS reset
    Server reboot
    Mysite setup settings(activity feed enabled)
    Alernate access mapping.
    Still activity feed not working.Please suggest.

    Hello
    Have you checked the timer job ?
    http://technet.microsoft.com/en-us/library/hh344225(v=office.15).aspx
    Best regards, Christopher.
    Blog |
    Mail
    Please remember to click "Mark As Answer" if a post solves your problem or
    "Vote As Helpful" if it was useful.
    Why mark as answer?

  • Can I restore my system from install discs when DVD is not working?

    Can I restore my system from install discs when DVD is not working?
    There is a disc jammed in the drive and when I try to do an install in Target Firewire mode using a G5 Tower I get an error saying the software cannot be installed on this machine, before I can even select the iMac's drive. I'm using the grey software install discs that came with the iMac.
    Is my only option to open up the iMac and get the jammed disc out?
    Thanks

    Problem solved - I posted on the general Tiger Discussions as well.
    I had the wrong machine started in Target Firewire mode.
    http://discussions.apple.com/thread.jspa?threadID=2180754&tstart=0

  • Optical DVD drive not working properly: HP notebook g61

    Game disks and dvd movie disks not working consistently. Sometimes detected as empty dvd disk and asks if I want to burn to the disk. Other times does not read that there is a disk in the drive. Computer is about one month old. On one of my game disks, I have to reinsert 4 or 5 times before it will read properly. Any suggestions?

    Sounds like you use the disk drive a lot. Before we panic and recommend a new drive, try a DVD lens cleaner you can pick up at any place that sells a lot of DVDs, like even WalMart. Run the cleaner disk and see if that helps.

  • DVD drive not working with win 8.1

    Hi. I have HP pavilion 15-e020TU notebook. My DVD drive worked with windows 7 and windows 8. After upgrading to windows 8.1 , the DVD drive is not working. Windows device manager can find the DVD drive but shows a yellow error mark. I selected "Update driver software" and then "Search automatically for updated driver software" . Then the name changed from "Mitsumi CD drive" to "hp DVD A DU8A5SH". And still not working. I installed the firmware update from http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv481en&cc=us&dlc=en&lc=en&jum... But a command prompt shows "Error: no mitsumi drives found." What can I do now ?
    This question was solved.
    View Solution.

    Hi:
    Try each of Resolution Steps 2, 3, 4 & 5 at the link below.
    One of them normally fixes the problem.
    http://support.microsoft.com/kb/314060

  • DVD drive not working on Satellite Pro U400-142

    My DVD drive is not working. I insert a disk, can hear the drive working for some time but then nothing happens. I checked 'Device Manager' - under DVD/CD-ROM drives it shows: MAT****A DVD-RAM UJ862AS, but there is a black exclamation mark on a yellow circle next to it. I opened the 'Properties' dialogue box and under device status it says:
    'Windows successfully loaded the device driver for this hardware but cannot find the hardware device. (Code 41)
    I'd like to try to try to solve the problem by re-installing the driver. I have checked the Toshiba website for the driver, but cannot find it.
    I'd be most grateful if someone could give me any ideas on how to sove this problem.
    Thanks
    P

    What you can do is follow:
    Remove optical disc drive from device manager and restart your notebook.
    The drive should be recognized and installed properly. If the same happen again try please > http://aps2.toshiba-tro.de/kb0/FAQ8101LA0000R01.htm

  • How to recover by recovery dvd if dvd rw not working

    I have my recovery DVDs. but my DVD drive is not working properly.
    In windows dvd can be read very hardly. and while booting from dvd to recover, system fails to read dvd. I have made iso images of dvd. 
    is ther anyway by which i can boot through iso image using pen drive?

    You can still order a usb recovery media thuimbdrive from HP. The cost is quite reasonable.
    Since you have not identified your notebook with a complete product number I have used information from another to help you. Follow the instructions on the document at the URL to order an HP USB recovery media flashdrive for your notebook.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph07143&cc=us&dlc=en&lc=en&os=4158&product=6787...
    See This HP web document if you don't how to locate the model number and\or product number.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • DVD Drive Not Working in MDD 867 Mhz Dual

    I have had intermittent problems with my DVD drive. Now the unit will not work at all. I can't eject the drive tray using the eject key on keyboard, and if I manually eject the tray using a paper clip, then insert a DVD and push the tray closed by hand, the disc will not appear on the desktop.
    Is there any way to troubleshoot this device to tell if it's the drive itself, or something other than that?
    Thanks,
    Noel

    It sounds like the drive, fairly cheap & easy to replace...
    http://eshop.macsales.com/static_pages/Framework.cfm?page=superdrive/sdl_powerma c_g4_quicksilver.html

  • External DVD drive not working with Lombard G3 333

    I have an external DVD drive that worked when I had 10.4, but had to reformat HD and now only have 10.3.9, and now the DVD drive does not work with DVDs, it will work with CDs and CDR media, but not with DVD media. My Lombard did not come with DVD originally and I am using a PC Card (Macintosh PowerBook DVD-Video PC Card For PowerBook G3 Series) and it worked before with 10.4, but not with 10.3, any ideas? Also have tried with 9.x, no go either. Any help would be appreciated.
    Also, would it be difficult to add a DVD logic board to my Lombard?
    Joey

    xamdu,
    I am reading and replying to this post after first replying to your other post, so a few of my previous comments are redundant.
    Regarding the FireWire(?) USB 2.0(?) DVD drive: It is possible Tiger supported your DVD drive but Panther does not. I would give PatchBurn for Panther a try:
    http://patchburn.de/download.html
    If the above is unsuccessful, take a look at this workaround:
    http://www.macosxhints.com/article.php?story=20040330171655882
    You can swap logic boards but it does require a lot of disassembly.
    Since no version of OSX supports Apple DVD Player, I am assuming you have a third-party player like VLC installed to watch movies. If this is the case, the DVD Decoder PC card is not necessary. If booted to 9.x, you of course will need the decoder PC card but I did not know 9.x's Apple DVD Player supported external drives.

  • Smart feed not working correctly

    hello,
    the smart feed are not working correctly in this course page :
    https://deimos.apple.com/WebObjects/Core.woa/BrowsePrivately/upmc.fr.2857894925. 02857894930
    Modified=01ca6e794f33e660
    I don't understand why...

    C, sorry…I read your posts out of order. I see that you have links to your smart groups after all. My apologies.
    It's as you say, the course pages load up, but I don't see anything in the smart groups. Just thinking out loud here…maybe the search criteria don't genuinely match anything on your site? Perhaps there are actual matches, but you've hidden content with a new credential?…I accessed both pages using the "Unauthenticated" and "All" credentials. My last/craziest guess is that it has something to do with localization…français versus anglais?

  • Ideapad U110 - External DVD Player not working with Windows 7

    I did a windows 7 upgrade on my U110 and now the external DVD drive will not function. The computer recognizes that a DVD driver is plugged in (in an explorer folder) but Windows 7 doesn't register the DVD when I plug it in and the computer cannot read the DVDs. It seems to be trying as there is noise emanating from the DVD drive and the light is blinking but no end result.
    I've search high and low for a solution but non seem to exist. Lenovo support has no driver replacement. Their rep suggested reinstalling the Intel chipset for Vista which I've done and that didn't fix anything. Is there a solution out there? Has anyone else encountered this problem?
    Oh and my internal microphone doesn't work either. I assume a related issue.
    Many thanks for any help.
    Alec

    Here's one out of nowhere:  do you have CD/DVD software that includes Sonic DLA or something like it?  I've seen that take over drives and prevent normal operation.
    If you right click on the drive and hit properties, are there any suspicious looking tabs?
    Total WAG, and about 1% likely, but there you go.
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

Maybe you are looking for

  • Report on cost of production

    Hi i am doing a report on the cost of production. where i have to get the standard cost of the raw material and packing material and calculate the actual cost of the same. I am getting all the information of the materials from t-code ck13 and ck13n w

  • Lack supporting Sony RX100 II in Adobe Camera RAW

    Please, integrate full support Sony RX100 & RX100 II to Adobe Camera RAW. This is a very good and expensive cameras. I replace my Nikon D5100 with Sony RX100 II, and second gives better quality despite very small size. But support in Camera RAW limit

  • Creative Vision:M Radio prob

    In the US my vision:m had no problem picking up radio stations. But now in Ireland when i do an autoscan, it picks up nothing. Anyone know why this is? Thanks.

  • Displaying a graph in a seperate VI

    I want to display a graph in seperate window (VI) but I also like to enable/disable this window. Is there a possibility to switch on or of the VI's frontpanel from within the program? Johan van Hespen

  • Default image loading icon changed

    Hello, I installed a social app that has hijacked my "image loading" icon. What I mean is that when I am using ANY app that requires time to download an image, the icon that displays on the screen to indicate that there is a pending image loading has