DVD files & iMovie

Hello,
This is my first time usinf a help forum and this is my first attempt to convert old vhs home movies to the digital realm. This step is slow
and tedious but successful.
I have completed DVD copies of vhs tapes but am unable to
utilize them in iMovie.
The initial tranfers were made using an external box that
converts vhs tapes to dvd ts files and then burns the dvd disc.
I used Roxio to import initially from a preexisting DVD only
to find out that the new DVD is not importable to iMovie.
All DVD's play on the computer with DVD player and on home DVD players. Can someone offer any suggestions? Thank you.

DVD is supposed to be the dead end. It is a distribution format, not an editing format. You should have converted the VHS to DV.
But luckily you can use some clumsy workarounds to convert DVD to DV which iMovie can handle:
http://www.sjoki.uta.fi/~shmhav/SVCDon_a_Macintosh.html#edit_convertMPEG
BTW, converting MPEG to DV/MOV the mother of all FAQs here Sadly the FAQ section of the forum decribes just the problem, not any solutions. And searching the forums doesn't always work either.
ObSig: I don't benefit from the link.

Similar Messages

Re user tip: How can I import a homemade DVD into iMovie for editing? - I've followed instructions so far so good, until I get to "You can then FILE/EXPORT USING QUICKTIME and choose Apple Intermediate Codec as your video codec. " How do I do that?

Re AppleMan 1958 excellent user tip: How can I import a homemade DVD into iMovie for editing? -
I've followed instructions with success until "You can then FILE/EXPORT USING QUICKTIME and choose Apple Intermediate Codec as your video codec. " How do I do that?
I installed MGEG Streamclip 193b8 and used their utility to install quicktimempeg2 and got a message stating it was successfully installed. (I'm on latest Maverick 10.9.2 on iMac) Then I dragged the VIDEO_TS file from my home DVD into the streamclip app. It asked which of 4 files to use, and I selected the first one. Streamclip played the video with the sound. so far so good. but now I cannot figure how to use quicktime player 10.3 to export this vob file out of streamclip.

Thank you for your quick reply and for clearing up my confusion. I'm exporting the first section now. I choose the smallest size, 3x4 but I'd prefer to go higher as this DVD was originally a VHS home movie. I'm wondering if after three conversions (VHS,->DVD->MPEG) the resolution will be so poor as to not support a larger size frame? If it can, what size should I select when I export?

While trying to burn a DVD off IMovie 09 I get the following message while trying to prepare: Unable to prepare project for publishing because an error occurred (-2125)

While trying to burn a DVD off IMovie 09 I get the following message: Unable to prepare project for publishing because an error occurred (-2125) Happened several times even after deleting and starting over.

Hi
Error -49 opWrErr File already open with write permission
Trash the preference files while application is NOT Running.
from Karsten Schlüter
Some users notice on exporting larger projects from within iMovie that this operation is aborted with an 'error -49'
This issue occours only on MacOs machines using 10.7x
try switching-off the Local Mobile Backup
in Terminal copy/paste
sudo tmutil disablelocal
Re-launch Mac
Yours Bengt W

Hi, Can anyone recommended software to import dvd to iMovies. I need to import about a dozen homemade DVD's and edit them into a single DVD comprising the 'best bits'. How best can I do this. I have an external hard drive available for the job

Hi, Can anyone recommended software to import dvd to iMovies. I need to import about a dozen homemade DVD's and edit them into a single DVD comprising the 'best bits'. How best can I do this. I have an external hard drive available for the job

You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
which is free, but you must also have the Apple mpeg2 plugin :
http://store.apple.com/us/product/D2187Z/A/quicktime-mpeg-2-playback-component-f or-mac-os-x
(unless you are running Lion in which case see below))
which is a mere $20.
Another possibility is to use DVDxDV:
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
which costs $25.
For the benefit of others who may read this thread:
Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.
And from the TOU of these forums:
Keep within the Law
No material may be submitted that is intended to promote or commit an illegal act.
Do not submit software or descriptions of processes that break or otherwise ‘work around’ digital rights management software or hardware. This includes conversations about ‘ripping’ DVDs or working around FairPlay software used on the iTunes Store.
If you are running Lion or later:
From the MPEG Streamclip homepage
The installer of the MPEG-2 Playback Component may refuse to install the component in Lion. Apple states the component is unnecessary in Lion onwards, however MPEG Streamclip still needs it. See this:
http://support.apple.com/kb/HT3381
To install the component in Lion, please download MPEG Streamclip 1.9.3b7 beta above; inside the disk image you will find the Utility MPEG2 Component Lion: use it to install the MPEG-2 Playback Component in Lion. The original installer's disk image (QuickTimeMPEG2.dmg) is required.
The current versions of MPEG Streamclip cannot take advantage of the built-in MPEG-2 functionality of Lion. For MPEG-2 files you still need to install the QuickTime MPEG-2 Playback Component, which is not preinstalled in Lion. (The same applies to Mountain Lion even though that has it preinstalled.) You don't have to install QuickTime 7.

I just created a slideshow dvd in imovie, and when I hit finalize it said that it would take 7 hours to finalize. I've only had my macbook pro for 6 months, and this is the first imovie I've done...is this normal? If not how can I speed up this process?

I just created a slideshow dvd in imovie, and when I hit finalize it said that it would take 7 hours to finalize. I've only had my macbook pro for 6 months, and this is the first imovie I've done...is this normal? If not how can I speed up this process? Thanks in advance for all of your help!

Hi
Time needed can depend on several things.
• less than 5 GB free space on Start-up (Mac OS) hard disk = Redicolous long times AND a DVD that most probably will not work OK
Medicine - I never go under 25GB free space
• Use of strange file formats into iDVD - can force it to de-code first then re-encode - this can take long long times
I use
Video - StreamingDV as from miniDV tape Cameras - or QuickTime Movies Converted to StreamingDV
Audio - .aiff 16-bit 48 kHz - (no .mp3, .wma etc)
• Use of old Mac - My G4 600MHz took about 24 hour per hour movie. my dG5 - about 2 hours per hour (I use Pro Quality encoding)
• Pro Quality encoding - takes about x2 to process a movie
Yours Bengt W

What is the best video converter for DVD to iMovie? Either free or to purchase.

What is the best video converter for DVD to iMovie? Either free or to purchase. And one that is 'fool-proof' and very easy to use. Many thanks, anyone who can advise.

You want to 'reverse engineer' the compressed mpeg2 DVD file back to something iMovie can use?
You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
which is free, but you must also have the Apple mpeg2 plugin :
http://www.apple.com/quicktime/mpeg2/
(unless you are running Lion in which case see below))
which is a mere $20.
Another possibility is to use DVDxDV:
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
which costs $25.
For the benefit of others who may read this thread:
Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.
And from the TOU of these forums:
Keep within the Law
No material may be submitted that is intended to promote or commit an illegal act.
Do not submit software or descriptions of processes that break or otherwise ‘work around’ digital rights management software or hardware. This includes conversations about ‘ripping’ DVDs or working around FairPlay software used on the iTunes Store.
If you are running Lion:
From the MPEG Streamclip homepage
The installer of the MPEG-2 Playback Component may refuse to install the component in Lion. Apple states the component is unnecessary in Lion, however MPEG Streamclip still needs it.
To install the component in Lion, please download MPEG Streamclip 1.9.3b7 beta above; inside the disk image you will find the Utility MPEG2 Component Lion: use it to install the MPEG-2 Playback Component in Lion. The original installer's disk image (QuickTimeMPEG2.dmg) is required.
The current versions of MPEG Streamclip cannot take advantage of the built-in MPEG-2 functionality of Lion. For MPEG-2 files you still need to install the QuickTime MPEG-2 Playback Component, which is not preinstalled in Lion. You don't have to install QuickTime 7.

Burn dvd from imovie

How do I burn a dvd from imovie? Using imovie as updated when Mavericks was installed.

Do you actually have iDVD?
Why is there no iDVD on my new Mac? How do I get it and how do I install it?
https://discussions.apple.com/docs/DOC-3673
To burn a DVD with iDVD from the latest version of iMovie, you have to export the movie using the Export button and select 480p as the size. Open iDVD and start a new project, then drag that exported movie file into the iDVD menu window, avoiding any drop zones you see.

What is the best way to make a DVD from iMovie

What is the best way to make a DVD from iMovie?
I am using iMovie 06 (Naturally) with iDVD 08. I have always used;
iMovie 06, File > Share to iDVD 08. And got pretty good results.
Some say the best way is to quit iMovie 06, open iDVD and import the movie from the Media button.
I have tried both methods in the results look the same. I'm interested in getting the very best quality possible.

You likely have one of the most expensive media converter boxes on the market today.
But does it work well with most macs? (my guess is that it does). But more specifically can it "handshake" with an intel based mac? I personally haven't tried it.
But you may want to read this for yourself if you haven't already:
http://discussions.apple.com/thread.jspa?threadID=1179361&tstart=2362
Assuming it works then the best format is .dv which this unit will support apparently.

Why do I lose sound when I try to make a dvd from imovie to idvd. The sound is all there in iMovie, but when I make my dvd, I have sound for about 3-4 minutes and then its gone.

I have made a 1 hour 30 minute dvd in IMOVIE. The video and the sound are perfect. However, when I make it into a dvd on IDVD, I lose sound after 3 or 4 minutes. Any Suggestions?

Hey MichiganMan32,
I found an article that looks like it applies to that audio issue you're experiencing. Check out the following troubleshooting steps here:
Resolution
Make sure the audio track has not been muted in the timeline.
Switch to timeline view by clicking the clock button in the iMovie window.
There are three checkboxes on the right side of the iMovie window underneath the sound icon. These checkboxes correspond to the video track and two additional audio tracks. Make sure all three tracks are selected. Any deselected tracks are muted.
If you are using iMovie 3 or later, check the "Edit Volume" option to see if it is selected. If so, make sure the volume of the affected video clips is not set to its lowest level, or try deselecting the option to Edit Volume.
See if the volume in iMovie is set to its lowest setting. Directly under the Preview pane in iMovie is a volume slider. Set this slider to maximum volume.
Make sure the computer's audio is not muted.
Quit and reopen iMovie, then check the clip to see if it now plays with audio.
Check to see if any of the video clips you have imported are in the MPEG-1 format. MPEG-1 clips will lose audiowhen you export them as part of your iMovie project.
Quit and reopen iMovie, then reimport the footage from the camera. Play the newly imported footage and see if you now have audio.
If you are using an analog to DV converter instead of a camera, make sure the audio connections are good between your VCR or other analog device and the converter. Check the documentation that came with your converter for more information.
Check /Library/QuickTime/ and ~/Library/QuickTime/ for any third-party plugins. Remove them if present, log out, and log back in. Check to see if the issue persists. If not, check with the manufacturer of the disabled plugin to see if an update is available. Note: The tilde (~) represents your Home directory.
Note: "Apple Intermediate Codec" and "QuickTimeMPEG2" are Apple components. For more information about a particular plugin, select the item in the Finder and choose File > Get Info. Look at the version string of the Get Info window to see if the plugin developer name is listed.
iMovie is missing audio on import, export, or playback
http://support.apple.com/kb/ts2289
Cheers,
David

How do I put several DVDs into one DVD using iMovie?

I have made 5-6 small movies over the years using iMovie based on family skits. They average about 10 minutes each. I have them all burned to DVDs. I want to be able to put them all on one DVD instead of having 5-6 separate DVDs. I thought it would be a simple process to copy each DVD to my computer and then add them and burn to one DVD. When I duplicate the first DVD, it goes into a folder had has 2 files---neither of which I can open and play. Then I tried to open iMovie and import the DVD to iMovie. Can't get that to work. Then I went to the Disk Utility and was about to create an image of the DVD and did something I'm not sure of which magically at some point imported to the iMovie project I had created for this. I was able to get this process to work 3 times following the same steps (although I can't tell you why or what I was doing). But then it just stopped working for the last 3 DVDs even though I did the same thing. I don't have to use iMovie. I just want a simple way to combine DVDs into one DVD. Any help would be greatly appreciated as these are going to be Christmas gifts. Thanks.

If the iPhone is shown 'full-on' so the video doesn't have to be distorted then you could use 'Picture in Picture' in iMovie. See: http://help.apple.com/imovie/mac/10.0/#mova1aaa682b
If, on the other hand you have an oblique view of the iPhone (as is the case in the video you reference) the movie will have to be distorted in order for it to fit the screen of the iPhone in the picture and show the correct perspective. iMovie doesn't offer this flexibility and you would need to use Final Cut Pro.
Geoff.

How do I save a Movie to a dvd in imovie 10.0.6

I have produced a movie from a group of video clips in imovie 10.0.6 on my macbook pro using osx 10.10.1.
This is where it ends. I cannot share it with a file to burn it to a disk. Further I cannot drag and drop this "movie" into an app, because it breaks it up into original clips.
Please help as I have spent a lot of time on this to go no further.

Hello roxayne,
It sounds like you have completed the project and now need to get it burned to a dvd with a 3rd party app. You should be able to open the project and share it as a Quicktime file with these steps from the iMovie help site:
Export a QuickTime file - iMovie Help
Select a movie, trailer, or clip in the browser.
Click the Share button in the toolbar, and then click File.
In the dialog that appears, do any of the following:
To set the title of the shared movie: Click the name at the top, and type a new name.
To set the description of the shared movie: Click in the Description field, and type new text.
To set the output format of the shared movie: Choose an option from the Format pop-up menu.
You can choose to export video and audio, or just audio.
To set tags for the shared movie: Click in the Tags field, and type tag names separated by commas.
To set the resolution of the shared movie: Choose an option from the Resolution pop-up menu.
Unavailable resolutions appear dimmed.
Tip: You can export a 4K clip in its native resolution by selecting a 4K clip in the browser.
To set the output quality of the shared movie: Choose an option from the Quality pop-up menu.
To manually set the output quality of the shared movie, choose Custom from the Quality pop-up menu, and drag the slider to set the target bit rate.
As you drag the slider, the estimated file size that appears below the preview thumbnail is updated.
To add your movie to the Theater: Select the Add to Theater checkbox.
Click Next.
In the dialog that appears, type a name in the Save As field, or leave the default name, which is the name of the movie, trailer, or clip.
Navigate to the location where you want to save the file, and click Save.
A progress indicator appears on the right side of the toolbar. Click the progress indicator to see details. The indicator disappears when the operation has finished.
After the share process is complete, the movie opens in QuickTime Player. A “Share Successful” notification also appears.
Thank you for using Apple Support Communities.
All the very best,
Sterling

Working with family DVD in iMovie

Hi all,
I need to import and old family DVD into iMovie and then do some edits and then create a video to save and later stream on apple tv and iPad.
BTW: now I am on imovie 11 and ML 10.8.5 - BUT I also have access to mavericks and new iMovie if that is better - please let me know.
Q: What is the best way to import/convert the dvd into a format that iMovie can easily import (without importing/and converting it a second time)
Also, what is the best format to save as a video file for howing on apple tv and also ipad?

Q: What is the best way to import/convert the dvd into a format that iMovie can easily import (without importing/and converting it a second time)
A：To import/convert dvd to iMovie, you can refer to the tutorial below: http://www.iorgsoft.com/DVD-Ripper/import-dvd-to-imovie.html.
Q: what is the best format to save as a video file for howing on apple tv and also ipad?
A:
1. Apple TV Video Formats：
H.264 video up to 1080p, 30 frames per second, High or Main Profile level 4.0 or lower, Baseline profile level 3.0 or lower with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file format;
MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
2. iPad supported formats：primarily those based on the MPEG-4 standard
iPad Air and iPad mini with Retina display Supported Video Formats :
H.264 video up to 1080p, 60 frames per second, High Profile level 4.2 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format

How do i burn dvd from iMovie

How do I burn dvd from iMovie. iMac has yesomite installed.

Why is there no iDVD on my new Mac? How do I get it and how do I install it?
https://discussions.apple.com/docs/DOC-3673
To burn a DVD with iDVD from the latest version of iMovie, you have to export the movie using the Export button and select 480p as the size. Open iDVD and start a new project, then drag that exported movie file into the iDVD menu window, avoiding any drop zones you see.

How to burn DVD in iMovie 10

I've just upgraded to iMovie 10 and cannot figure out how to burn my movie to a DVD. I don't want to share on Vimeo, CNN, etc. I just want a movie for me?
What may I missing? Help, please!

RuffiansRide,
The manual is not going to help you figure out how to burn a DVD. Apple discontinued iDVD several years ago and no longer supports it and in version 10 of iMovie has removed all references to iDVD or burning DVDs.
That said, iDVD stil works beautifully and remains the best option for creating nice-looking DVDs on a Mac.
You said that everything appears to be uploading to iCloud. Have you tried unchecking "Automatically upload content to iCloud" in iMovie's Preferences?
Here is a step by step on how to create a DVD from iMovie 10 using iDVD 7.1.2. If you do not have iDVD, you can probably substitute Toast everywhere I used iDVD (I don't have Toast so can't verify this).
1. Create a project in iMovie 10.0.1
2. Go to File>Share>File... and for Size choose Large 540P (960 x 540) and click Next
3. Choose a location on the hard drive to save the file to.
4. Wait for the blue circle activity indicator to finish.
5. In Finder, verify that iMovie created an MP4 file in the location specified in step 3.
6. Open iDVD and click "Create New Project."
7. Give the project a name and save it to your hard drive.
8. Drag the file you created earlier from the Finder into your iDVD project window.
(or go to File>Import>Video... and choose your video there)
9. Make any adjustments to drop zones, etc.
10. Click the burn button.
11. Insert a DVD and let it do its thing.
This produces a working DVD for me.
Here are my software specs:
OS X 10.9 Mavericks
iMovie 10.0.1
iDVD 7.1.2

I have created a DVD via iMovie and burned several copies. When played the DVD's will stop and display a message SKIPPING DAMAGED Part. It is not the DVD. When trying to export the project, I get an error message.

I have created a DVD via iMovie and burned several copies. It is a large file. When played the some DVD's will stop and display a message SKIPPING DAMAGED Part but will not resume. Some work fine. It is not the DVD. I have burned from several batches. When trying to export the project, I get an error message with the following message: The project could not be prepared for publishing because an error occured (-108).

TV video typically is copyrighted content. We'd be breaking several rules trying to help you. Good luck!

DVD files & iMovie

Similar Messages

Maybe you are looking for