DVD Files only

I was just handed a data dvd with .vob .bup & .ifo files on it. These are exactly what should be on a dvd, but I don't know how to burn it to where it plays back as a DVD on a standalone player. I tried it in toast, but it hasn't worked yet. Do I need to make a Video_TS folder put the files in there, then put it into toast as data? or how should I do this?
Thanks for any suggestions

Bittney
If you burn it as a standard data DVD it will not work in some dvd players.
o Copy the VIDEO_TS folder in your hard drive
o Open the folder with Apple DVD player to check it work fine ! If it does, close it.
o Open Toast and go to Video section
o Select *DVD-Video from VIDEO_TS folder* option
o Burn it
Toast will set the right format (UDF) and the disc must play fine in players.
Hope that helps !
  Alberto

Similar Messages

  • A DVD (mpg file only) comes up on my MacBook and Dell PC but not my iMac.  Aren't all Macs alike?

    A DVD (mpg file only) comes up on my MacBook and Dell PC but not my iMac.  Aren't all Macs alike?  I was told by a couple of experts to copy the file on my MacBook and then send it to my iMac.  But shouldn't my iMac show it now if my little Mac does?

    Zap the PRAM and Reset the SMC, then pop in the DVD again.

  • Upgrade from Windows 7 pro to windows 8.1 pro I only get keep personal files only or nothing, I want to keep apps too

    when trying to upgrade from windows 7 SP1 to 8.1 pro from the DVD while being in windows I only get an option to keep personal files only or keep nothing.
    what do I have to do so I can do a upgrade and keep all the programs too ?
    thanks!
    Brandon Dillon

    I think there might be a way that when you install win 8.1 on a system with existing windows it will copy the user profile to a spare partition and then format the C and the then install windows 8
    If you do a rebuild on a Win 7 or Win 8 PC from a recovery partition, the software as standard now on the rebuild gives you the options of keeping your Data, even though it will wipe and reinstall everything as per factory settings.
    So this is normal and to be expected.
    To be honest I wouldn't even do this... I'd backup everything, install Win 8.1 from complete scratch, not keeping any data and then restore data as I needed it. I am apprehensive about it thinking it knows where all my data might be.... especially with how
    some programs like to store stuff.
    Of course this means everything to install again, but latest versions always good, a clean install

  • HELP! MacBook Pro cant recognise or burn DVDs but only CDs, and...

    Hi all
    I noticed that there many of you have the same problem, but I really need some advice here, my MacBook Pro cant recognise or burn DVDs but only CDs, well actually occasionally it does recognise the DVDs then it burn but cannot write (on Toast), also in many other apps, like iDVD or DVDSP, it does run well on the first part of the burning but then failed at the end, with all kinda diff error msg. I have tried using many diff brands of disc too, inc verbatim.
    So I borrowed my friends external DVD writer (actually a cheapy one with no brand), when I tried to burn using the external then an error msg comes up and says the writer cannot recognise the disc.
    I dont wana get the MBP to repair but just wana get a external DVD writer to solve the problem, cos i need to use my computer and dont have a replacement mac, but now I am worry if the problem i now having is a system problem or just hardware, not sure if it is because the DVD writer i borrow is cheapy so it doesnt cope with mac, or just my MBP have system error that cant burn DVDs...
    But my MBP can burn CDs so it is not a hardware problem? and if that is a system problem so even I buy a new DVD writer wont solve the problem?
    btw, I have tried many solving methods like rewriting permission, reset PVRAM, etc
    PLSSSSSSSSSSSSSSSSSSSSSSSSS HELP

    I'm having the same problem you are on my 2.4GHZ Core2Duo MBP running 10.5.2. It will sometimes recognize DVDs, sometimes not... it chuggs and clunks and then spits the disc out. If i re-insert it a view times it will show up on the desktop. I get failures from Toast as well as iDVD. If i keep trying i have been able to burn files onto a disc with the finder, but then the burner fails during the verification. If put the disc back in the contents appear to be correct (after a quick look). Burning CD-Rs seems to be working fine, that with the occasional DVD write seems to point away from the HW. I am trying with both Memorex DVD+RW and Verbatim DVD-Rs...
    I have tried the command/option-PR reset combo with no luck.
    Any ideas?
    thanks,
    -graham
    PS the specific error i got from iDVD was: The error #-2147352539 was reported…
    Message was edited by: Graham - Sonos

  • Hi, im tinkering with mpeg streamclip and its giving me problems because it won't open my ripped dvd files from my desktop. It keeps giving me the same message "no VOB files can be found". Can anyone help me, this doesn't make sense.

    hi, im tinkering with mpeg streamclip and its giving me problems because it won't open my ripped dvd files from my desktop. It keeps giving me the same message "no VOB files can be found". Can anyone help me, this doesn't make sense. I also found online that you need Apple Mpeg-2 playback component in order to use mpeg streamclip. Even though I have OS X Lion, should I download the add-on?

    You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
    http://www.squared5.com/svideo/mpeg-streamclip-mac.html
    which is free, but you must also have the  Apple mpeg2 plugin :
    http://www.apple.com/quicktime/mpeg2/
    (unless you are running Lion in which case see below))
    which is a mere $20.
    Another possibility is to use DVDxDV:
    http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
    which costs $25.
    For the benefit of others who may read this thread:
    Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.
    And from the TOU of these forums:
    Keep within the Law
    No material may be submitted that is intended to promote or commit an illegal act.
    Do not submit software or descriptions of processes that break or otherwise ‘work around’ digital rights management software or hardware. This includes conversations about ‘ripping’ DVDs or working around FairPlay software used on the iTunes Store.
    If you are running Lion:
    From the MPEG Streamclip homepage
    The installer of the MPEG-2 Playback Component may refuse to install the component in Lion. Apple states the component is unnecessary in Lion, however MPEG Streamclip still needs it.
    To install the component in Lion, please download MPEG Streamclip 1.9.3b7 beta above; inside the disk image you will find the Utility MPEG2 Component Lion: use it to install the MPEG-2 Playback Component in Lion. The original installer's disk image (QuickTimeMPEG2.dmg) is required.
    The current versions of MPEG Streamclip cannot take advantage of the built-in MPEG-2 functionality of Lion. For MPEG-2 files you still need to install the QuickTime MPEG-2 Playback Component, which is not preinstalled in Lion. You don't have to install QuickTime 7.

  • I am receiving the data through the rs232 in labview and i have to store the data in to the word file only if there is a change in the data and we have to scan the data continuasly how can i do that.

    i am receiving the data through the rs232 in labview and i have to store the data in to the word or text file only if there is a change in the data. I have to scan the data continuasly. how can i do that. I was able to store the data into the text or word file but could not be able to do it.  I am gettting the data from rs232 interms of 0 or 1.  and i have to print it only if thereis a change in data from 0 to 1. if i use if-loop , each as much time there is 0 or 1 is there that much time the data gets printed. i dont know how to do this program please help me if anybody knows the answer

    I have attatched the vi.  Here in this it receives the data from rs232 as string and converted into binery. and indicated in led also normally if the data 1 comes then the led's will be off.  suppose if 0 comes the corresponding data status is wrtten into the text file.  But here the problem is the same data will be printed many number of times.  so i have to make it like if there is a transition from 1 to o then only print it once.  how to do it.  I am doing this from few weeks please reply if you know the answer immediatly
    thanking you 
    Attachments:
    MOTORTESTJIG.vi ‏729 KB

  • Updated to Adobe Muse 2014 this morning and have worked in it for the last 8 hours. Now when I try to publish the updated site to Business Catalyst for my client to preview it crashes everytime. I have tried just publishing altered files only, then tried

    Updated to Adobe Muse 2014 this morning and have worked in it for the last 8 hours. Now when I try to publish the updated site to Business Catalyst for my client to preview it crashes everytime. I have tried just publishing altered files only, then tried the whole site again, and then tried publishing as a new site altogether. Thought I would then try to export as HTML in the hope of uploading the files via an FTP client and Muse crashes and locks up again. I am extremely stressed about this as I am in the last few days of of website I have been working on now with no issues since December. We are due to go live and my client needs to see it. I am desperate for an answer. It is not looking good. I am on an Apple Mac and have not had any isses publishing it for the last 6 months. Not very happy to say the least. Need desperate help.

    Hi Zak, I got onto Adobe Customer Care Live Chat this morning and gave them the error message. After some trouble shooting with them it appears the older archived file of the site still publishes. I have now reverted back to the old file and copied and pasted out of the new file and from some ideas given to me by support I am now able to publish to Business Catalyst. It seems there was something corrupt within the new pages added yesterday. I have no idea if this would have still happened if I hadn't updated but I am glad it wasn't a Muse specific problem. I am loving using Muse and the support from Adobe has been excellent. Thanks everyone. By the way I do love the new version and apart from this hick up that lost me a few hours, aged me some more and gave me grey hair I really love Muse. Thanks again.

  • How to open a pdf file only in one computer

    I would like to sell pdf publications by allowing  the user to open them only in one computer. I learnt that this has been done  the past when I bought  some publications but I don't know the way to do it. Could you help me?
    thank you
    Marco

    thank you for your support
    Best Regards
    Marco
    Da:     Mylenium <[email protected]>
    Per:    MARCO1 <[email protected]>,
    Data:   09/10/2013 11:09
    Oggetto:        How to open a pdf
    file only in one computer
    Re: How to open a pdf file only in one computer
    created by Mylenium in Downloading, Installing, Setting Up - View the full
    discussion
    You will havwe to sign up for some service that supports rights
    management, use protected PDFs via LiveCyle/ Acrobat Connect or learn how
    to create your own ePub stuff using Digital Publishing Suite. In any case,
    it will probably cost you money upfront before you make any revenue.
    Mylenium
    Please note that the Adobe Forums do not accept email attachments. If you
    want to embed a screen image in your message please visit the thread in
    the forum to embed the image at
    http://forums.adobe.com/message/5746873#5746873
    Replies to this message go to everyone subscribed to this thread, not
    directly to the person who posted the message. To post a reply, either
    reply to this email or visit the message page: [
    http://forums.adobe.com/message/5746873#5746873]
    To unsubscribe from this thread, please visit the message page at [
    http://forums.adobe.com/message/5746873#5746873]. In the Actions box on
    the right, click the Stop Email Notifications link.
    Start a new discussion in Downloading, Installing, Setting Up at Adobe
    Community
    For more information about maintaining your forum email notifications
    please go to http://forums.adobe.com/message/2936746#2936746.
    Il messaggio trasmesso può contenere informazioni di carattere
    confidenziale rivolte esclusivamente al destinatario. Ne è vietato l'uso,
    la diffusione, la distribuzione o la riproduzione da parte di altre
    persone e/o entità diverse da quelle specificate. Nel caso aveste ricevuto
    questo messaggio per errore, siete pregati di segnalarlo immediatamente al
    mittente e cancellare quanto ricevuto.
    This electronic mail transmission may contain confidential information
    addressed only to the person(s) named. Any use, distribution, copying or
    disclosure by any other person and/or entities other than the intended
    recipient is prohibited. If you received this transmission in error,
    please inform the sender immediately and delete the material

  • Panasonic .MOV files only play audio no video in Premiere Elements 11??? Not Working Help

    Panasonic .MOV files only play audio no video in Premiere Elements 11??? Not Working Help

    It all depends on the codec the file uses, Karli.
    What model of camcorder is this video coming from?
    Are you working on a Mac or a PC? Have you got the latest version of Quicktime, per the program requirements? When you started your project, did you select the settings for a DSLR at 720p? This is a vital step since it will activate the components your computer will need to work with many of these types of files.
    BY THE WAY, KARLI--
    PLEASE do not post the same question more than once on this forum! You've already got a thread going with this same question and several responses posted. It's very confusing when you post the same question a second time and start a whole new discussion.

  • I recently lost my windows laptop due to a virus. I had backed up all files onto a drive(files only). However no itunes playlists. i have all my playlists on my iphone and pics etc however when im trying to sync to my new computer itunes deletes all data

    I recently lost my windows laptop due to a virus. I had backed up all files onto a drive(files only). However no itunes playlists. i have all my playlists on my iphone and pics etc however when im trying to sync to my new computer itunes wants to  deletes all data off of my iphone so i click cancel
    i want to update to iOS 5 and still have itunes be able to copy my playlists from my iphone. for free. why does apple provide a recovery from iphone option?

    If you have a backup, restore the ENTIRE iTunes folder to the computer.  This restores the library and device association files.  If for some reason you chose to only back up the media and not the entire iTunes folder, then the only option is to let iTunes wipe the drive and re-sync.

  • CD/DVD Drive only reads DVDS Not CD But the computer reads it as a DVD RW Drive!

    CD/DVD Drive only reads DVDS Not CD But the computer reads it as a DVD RW Drive.the drive door say RW DVD+R DL,Compact Disk Rewritable,Ultraspeed,DVD Multi Recorder.I was Wondering if Windows Loaded the wrong Driver?My Laptop S/N IsCNF62612TZ And P/N Is EZ601UA#ABA And The Front Of My Monitor says Hp Pavilion Dv 1000 Entertainment Notebook PC,And The Service Tag Is dv1738od and the Sticker On The Back Of The monitor say Hp Pavilion dv5- 1235dx Entertainment notebook PC.it Cme Factory With Win xp and when i got it the os was corrupted.i tried to reinstall xp but disk said no hard found.so i booted it up with vista ultimate and then downloaded the drivers and stuff from the here.should i had downloaded the 64 bit set as well?

    della wrote:
    My toshiba tecra a2 can only read DVDs. I cant read any type of cd. Ive tried so many things. My laptop is running on xp service pack 3 with a mat**bleep**a DVD RAm UJ 820s. I can burn/run any type of DVD but cant do anything with cds. Ive tried unistalling the drive and that didnt work. Ive uninstalled the IDE drivers and that didnt work. Nothing seams to work. I cant use recovery cds because there CDS. Please Help!!!!!!!!!
    It's probable that the CD 'side' of the combo drive has failed.  That you cannot boot from the recovery CD is pretty much proof of the failure.  

  • My CD/DVD Drive Only Works When I Jam the CD/DVD in hard..?

    My CD/DVD drive only works when I stuff the CD/DVD in the drive EXTRA hard. If I just try to put in with normal force (that at one time worked) it spins the disc around, makes a spinning noise, and then ejects it. I'm taking it to the Apple Store soon. What should I expect to be wrong and is it fixable? Please share details. Thanks in advance.

    Welcome to Apple Discussions!
    It sounds like the spring that loads the drive has gotten jammed by something. This can often happen if you use CDs with sticky labels, or do anything to label the discs directly. As a result of issues like these, I've not labeled any discs directly, and instead store the in jewelcases, and purchase them prepackaged in jewelcases to avoid such issues.

  • Reading files from local hard disk - Access Local Files Only

    Hi All,
    I have a local flash file published as 'Access Local Files Only', to allow me to read from local filesystem.
    What methods or classes can I use to read text and other files from the user's harddisk.
    This is the first time I am trying to do something like this, all help is grealy appreciated.
    Thanks
    Andy

    Hi, thanks for the responses
    I did some searching and found that the urlloader class is the right one for the job.
    'Access Local Files Only' option is provided for this very purpose I believe.
    If anyone has done something like this and have some sample code it would be awesome
    Cheers
    Andy

  • On windows 8 and itunes I have importing problems the DVD is only reading the music cd from 1.5x to 4.0x for 95% of the time, it does hit speeds of 30x for the other 5% of the time. Is it a driver issue with the DVD or is it  a windows 8 issue?

    on windows 8 and itunes I have importing problems the DVD is only reading the music cd from 1.5x to 4.0x for 95% of the time, it does hit speeds of 30x for the other 5% of the time. Is it a driver issue with the DVD or is it  a windows 8 issue?

    No. You have no alternative but to plug it into a computer running iTunes and restore it.

  • Hi I shoot on a canon 5d mk11 and I record my audio on an external device yet when I open up my footage in final cut pro x I can't find my external audio files only the ones attached to the clip which are off the camera mic

    I shoot on a canon 5d mk11 and I record my audio on an external device yet when I open up my footage in final cut pro x I can't find my external audio files only the ones attached to the clip which are off the camera mic

    What device?
    What format?
    How are you importing it?
    Can you find the external audio with Finder?
    Where is your destination file when you import it?
    Andy

Maybe you are looking for