DVD from PE9 won't play in computer let alone another DVD player

I produced a 7 minute video in HD. I can play it on my computer either as HD or at standard res from files produced via the "Computer:Export files..." on the Share menu. I need to produce a standard NTSC DVD and when I burn using the "Disc: Burn DVD..." I get a message that the burn has been completed successfully. Yet the DVD will not play on my computer if I reinsert in in the same drive I just used to burn it, and won't play in a regular DVD player either. The computer doesn't even see the disc if I search for it. I've read a lot of stuff about DVD-Rs and booktypes and bitsetting but this doesn't seem to apply here since the computer can't read its own disc. Burning a copy of the files burned to folders doesn't work either. The DVD burner burns everything else just fine. I am using DVD+Rs. Would it make any difference if I used DVD-Rs? Or is there anything else anyone can suggest? I am using Windows 7 Professional. Thanks.

>burning to a folder
If you are able to write (not burn) the folder structure to your hard drive, you may use the FREE http://www.imgburn.com/index.php?act=download to write files or folders or ISO to disc
Put a commercial DVD in your drive and take a look with Windows Explorer to see the folder structure and the types of files... and make sure what you write to a folder from PE is similar

Similar Messages

DVD from iDVD won't play on DVD player

I have made a movie in iMovie with pictures and videos from a vacation. When I was finished in iMovie, I exported the movie to iDVD.
In iDVD I made a menu for my DVD.
I used a Memorex DVD-R disc to burn my DVD on, but I now have a problem. The burned DVD will only play on computers (Macs and Windows), not on regular DVD players. When I try to play the DVD on a regular DVD player, the TV just displays an error message.
Does somebody know what's wrong?

It sounds like a burn error-rate problem. Unfortunately, iDVD doesn't directly give you the option to burn a disc at a low burn rate to greatly reduce such errors.
What you must do is a two step process:
Step one. 'Burn' a disk image of the completed project to your hard drive - it's an option under FILE. After the disk image is complete, double-click on the disk image icon to mount it on your Desktop and use Apple's DVD Player application to view the image to make sure it plays correctly (File>Open DVD media).
Step two. Use Apple's Disk Utility application or Roxio's Toast Titanium to burn the disk image to writable media. Use a low burn rate - no higher than 4x, but I like to use 2x. See Burning a disk image file on a CD or DVD in Mac OS X at http://docs.info.apple.com/article.html?artnum=93006
Also, Memorex may not be the best media choice. Verbatum seems to have a good reputation and I like Maxell.

DVD Created with IDVD Will Play on Computer, But Not in DVD Player

I loaded some video into IMovie, then went to IDVD to create a DVD. It previews fine and the disk burned fine. I can play the disk back in the computer, but when I drop it in a Panasonic DVD Player, it won't play.
I've been burning for some time now and haven't had this problem before. Disks burned two weeks ago are fine, these are not.
I've tried a couple different brands of disks, it makes no matter.
I'm at a loss.

One of the limitations of iDVD 4 is that 'out of the box' it doesn't support the creation of disk image files - just burning to writable media.
Your problems sound to be high burn error related. With newer versions of iDVD you can create a disk image file out of iDVD and use Apple's Disk Utility to burn the image to writable media at a low (4x or lower) speed. This reduces the amount of burn errors. None of the iDVD versions prior to the current iDVD '08 had any provision for reducing the burn speed.
What brand of media are you using? (Maxell and Verbatim have good track records around here.)

DVD from DVDSP won't play in dvd player?

Hi.
I shot some HDV footage on a Sony-Z1, edtied it in FCP 5.1, exported a Quicktime movie (HDV 1080i50) from FCP, took this QT file to Compressor 2.1 and made a H.264 6.75Mbps.mov. In DVDSP I have made both a HDDVD and also tried to make a new project and a DVD as a SP (the exported files used were a MPEG-2 6.2Mbps 2-pass 16:9.m2v, both 1080i (HVD res) and 1080i (std. res)). Have tried to burn all of the different DVDSP projects on DVD -R and +R's . Also tried to change the settings for Red laser and Blue laser. All of the DVD's works on various computers, but none of them works on a HD DVD player. Have tried several different dvd players.
Does anybody know what might be the problem???
Best regards,
Martin Thaulow

If you look through these forums you will notice that no one has come up with any answers for compatability PlayBack problems.
I have looked for years and read the entire manual but still Im making great DVDs for my Macs but watch out if you give them to any one else,
Im about to figure out how I can get the most out of DVD burning in Toast, at least I know the DVDs will play anywhere!

Updated OSX - DVD-R's won't play now

A few weeks ago, I updated to 10.3.8, then 10.3.9, and now DVD-R's won't play anymore. The drive doesn't recognize them. These are DVD's that played fine before, in fact some of them are DVD's that I burned on this machine.

Edit, it is impossible to update 10.3.9 online to 10.4.9.
Only 10.4 up to date, 10.4 on CDs (which can be gotten from the media exchange program if you have 10.4 on DVD), 10.4 on DVD would bring you to a 10.4.9 updater compatible 10.4. Since you initially had 10.3.8 according to your initial post, something doesn't jibe about what you are saying. Where did you get 10.4 to update your 10.3.8 or 10.3.9?
Also if your machine came with 10.3, what happened to the 10.3 installer DVD that came with it?

Movie won't play on computer say quicktime is incompatible

downloaded purchased movie won't play on computer say quicktime is incompatible. I get this message for Hannibal Rising: This movie requires QuickTime, which is not supported by this version of iTunes.

First, thank you for taking the time to respond.
This is the recorder I have: Sony DVD Recorder & VHS Combo PlayerRDR-VX515:
http://www.sonystyle.com/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/USD/SYDisplayProductInformation-Start?CategoryName=hav_DVDDVDRecorders&ProductSKU=RDRVX515&TabName=feature&var2=
The specs stated that it does record MPEG video.
The Mac mini is a super drive w/ + & - capability. I guess I'll have to buy another recorder to get this to work.

I'm burning dvd's that won't play on a regular dvd player. What am I doing wrong? Are there some simple things to check to figure this out? (Sorry, I know this has been asked many times)

I'm burning dvd's that won't play on a regular dvd player. What am I doing wrong? They play fine on computers but not on dvd players. Are there some simple things to check to figure this out? (Sorry, I know this has been asked many times). Created in DVD studio pro.

Hi
Just my thoughts to add to the excellent answers above.
• BRAND of DVD used - Matters when doing Video-DVDs
Memorex, NoName etc cheap brands usually do NOT work
I only Use Verbatim (more organic dye in these)
• Type of DVD - matters
- DVD+/RW - usually results in problems
- DL-DVDs are more problematic than SL-DVDs
- DVD+R are a more modern sort - BUT PLAYS BADLY or not at all on older DVD-players
I only use DVD-R
• BURN SPEED - matters
- Best in iDVD app - IS NOT BEST at all but results in lot's of Burn Errors = Doesn't play well or at all
I set this down to x2 or x4 max.
Yours Bengt W

I rented a movie from itunes(The Untouchables), and it won't play. It lets me click on it but then is just black and won't play. I saw that I was billed for it. What should I do?

I rented a movie from itunes(The Untouchables), and it won't play. It lets me click on it but then is just black and won't play. I saw that I was billed for it. What should I do?

I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.

Created project in PE4, burned to DVD - plays on Computer but not on DVD Player.

Created project in PE4, burned to DVD - plays on Computer but not on DVD Player.
Vista Ultimate
Let me know what other info you need.
Thanks for your help.

Yes, the lowest possible Burn speed will be a step in the direction of compatibility.
As for the Quality setting, Robert Johnson has done tests on various versions of PE and has recommend a setting of about 7.8 (IIRC). Unlike Encore, where one has many more choices, PE limits one to a Quality setting of 8. This is about equivilent to the recommend 7MB/s in Encore. Robert found that just below the 8 max. actually yielded slightly better results, than did the full 8, on his tests.
The three things that help to insure the greatest compatibility with set-top players are, and in pretty much this order:
1.) Quality media - Verbatim, Taiyo Yuden or Falcon (US only)
2.) Burn speed (slower is better. It might take a few minutes more, but if it works, you don't have returns or have to do it again.)
3.) Bit-rate around 7MB/sec
Remember - no set-top player HAS to play any Burned DVD. Most do, but some just do not - only replicated, pressed discs. Also, some player are still sensitive to the -R and +R media types. This is less a problem with newer units, however it still could be an issue with many older ones.
Personally, I test a "master" on four different players, plus my computer, before I Burn a batch, or ship out any. One unit is a very high-end Marantz, another is a mid-level Marantz, one is an RCA "el cheapo" and the other is an older Pioneer. I figure if the disc plays everywhere, there is a good chance that it will play for the client - though there are still no guarantees.
Good luck,
Hunt

Why won't my iMac computer let me find a driver to install my HP eprint D110a series?

Why won't my iMac computer let me find a driver to install my HP eprint D110a series? I'm new at this so please bare with me here... lol... Thank you..

Hi,
Hey that's a good sytem as well as the print, please click the following link to download the drivers.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-80514-1&lc=en&dlc=en&cc=us&...
Thanks
Josh.C
Click on the BLUE KUDOS button on the left to say "Thanks"
Although I am an HP employee, I am speaking for myself and not for HP.

When using Final Cut Pro X (iMac mid 2011 model-version 10.1.3) to burn 1 hour movie onto DVD, it seems to render but when computer says 'Sharing to DVD successful' and yet DVD is blank, what's my next move? Burning hardware is working as I burned mo

When using Final Cut Pro X (iMac mid 2011 model-version 10.1.3) to burn 1 hour movie onto DVD, it seems to render but when computer says 'Sharing to DVD successful' and yet DVD is blank, what's my next move? Burning hardware is working as I burned a project using iMovie afterwards. I filmed a funeral service and family get together afterwards but can't share it with family and friends...plz......suggestions/recommendations/condemnations........

Another update to my burning problem...in my movies folder there is an img file (states it is a classic disk image-2.82GB) after I have tried burning a DVD unsuccessfully and when I open the img file I see 1) AUDIO_TS AND 2) VIDEO_TS files. I 'control' clicked the file and tried burning this folder onto a disc. Result it seemed to burn both files onto DVD but still couldn't view video.

Ipod 80 classic not listed in my devices or my computer let alone in itunes

I almost feel jealous reading all these issues from these poor people whose pc's can actually see their Ipod. My Ipod 80gig ran fine with my last PC which ran XP but I made the mistake of thinking that Vista had now been around long enough for any bugs to be fixed and purchased a new dell.
After trawlling the web and being bounced between Dell and apple I'm at the point of thinking that either the Ipod or the PC has to go, seeing that the pc cost 10 times what the Ipod did I think I know which is going out the window.
When the Ipod is plugged in the PC does nothing, cant see it in my devices or my computer let alone in itunes.
I thought this was a problem with Vista but after reading a few forums I'm thinking it could be the new itunes which I downloaded after the new pc got here.
I have tried reinstalling Vista and itunes, tried to different usb leads and another ipod but still nothing.
Someone please help.
thanks
Thanks
dell Windows Vista dell

right.... I have plugged in a brand new Ipod and it went through the installing drivers process after which Itunes opened and there was the new Ipod listed.
So now I'm thinking that my origianl Ipod must be set to my old pc somehow... tried resetting it and all that but still nothing..
Has anyone got any ideas how to format the whole thing back to what it was straight out the box?? need to be able to do this just on the Ipod as there is no way to control Ipod from PC still as its still not recognising it.
thanks

Dvd-r recorded from 8mm won't play in macbook pro?

Happy super bowl Sunday! I recently burned some 8mm footage onto a dvd-r using a samsung vhs/dvd converter. The dvd plays perfectly on all dvd players in the house but it won't play on my macbook pro or my imac. I've looked into systems to hook the camera (which by the way is about 15 years old) up to my mac but it's about a 160.00 converter box to go from a/v cables to firewire 400/800.
Anyway, looking at all these forums it seems like I need to find a way to finalize the dvd-r???? Is that all there is to it? I'm not even sure if there is that option on the samsung dvd box? I just spent around $4000.00 on this macbook pro and my home imac. I made the switch for the ease of operation making movies. Unfortunately, so far this is tougher than I thought is would be.
Dave

Thanks for answering. Yes I checked it today and I re-recorded the video again. I chose to finalize it at the end and to my surprise it worked on my computer. However, it will play for a short time and then freeze in different spots. I can't restart it, It won't continue. Dvd player stops it real quick then I try with VLC and it plays even more but still does the same thing.
I'm not sure if it's the speed or something else. There aren't too many options for recording on the Samsung DVD 300 model dvd recorder.
Sure wish this was easier. Should be easier for me. I bought all these apple products for this purpose and it sure is convoluted.

HELP PLEASE: DVD Movie Won't Play on Computer nor Transfer

Hi! I burned a VHS taped program to a DVD on a Sony DVD burner and I made sure that I finalized the DVD. When I checked it while it was still in the player it did play on the TV very well but the DVD will not play on the computer nor will any of the programs recognize it.
When I put the DVD in the Mac Mini a folder appears on the desk top that says: SONATA_VOLUME and has a red circle with a white line in the center of it.
When I click on the folder and it opens there is nothing showing inside of it. QT Pro, iDVD, iMovie nor any other app will play it nor Handbrake, MacTheRipper will recognize it.
I'd like to know what I did wrong and how to fix it so that I can transfer & convert this file for the iPod.
I got the disks from compusa on sale so they are no name brands. Is the problem the DVD burner or the disks?

First, thank you for taking the time to respond.
This is the recorder I have: Sony DVD Recorder & VHS Combo PlayerRDR-VX515:
http://www.sonystyle.com/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/USD/SYDisplayProductInformation-Start?CategoryName=hav_DVDDVDRecorders&ProductSKU=RDRVX515&TabName=feature&var2=
The specs stated that it does record MPEG video.
The Mac mini is a super drive w/ + & - capability. I guess I'll have to buy another recorder to get this to work.

DVD burned from img won't play in other players

In order to back up an old DVD I had to protect it from damage, I ripped it with handbrake and encoded it as a diskimage via iDVD. As the movie was 1.5 hours in length I used the professional setting under project info. After approximately 12 hours of encoding the disk image finished. I can open the disk image with DVD player on the mac and it performs perfectly. I used the disk utility to burn the disk image to a Memorex DVD+R without incident. This morning I tried the burned DVD in my xbox360 which read it as a mixed media disk and would not play it. Next I tried in my sony blu ray player which read it as a photo disk with no photos on the XMB.
What do I need to do to have the burned DVD work properly? Are the DVD+Rs bad or is it something with the encoding? Thanks in advance for your help. I am a pretty big novice to iDVD and the whole process.

To create an image file, launch Disk Utility and select File: New: Disk Image From Folder. In the window that appears, navigate to the desired folder (the DVD) and then click on Image. Give the image file a name, and click on Save when prompted. That’s it.
How to copy previously-burned DVD-R video discs
http://support.apple.com/kb/HT2059

DVD from PE9 won't play in computer let alone another DVD player

Similar Messages

Maybe you are looking for