DVD from TV Series

I recently acquired a few television series from a friend. They are currently on my desktop and I would like to burn them to disk to save hard drive space. I first tried dragging them onto the drop zone of the CREATE A DVD portion of iDVD. This isn't working because, while the size of the files fit, the length of time is too much. In addition, when I open iDVD, MAGIC IDVD, the movies are not listed under the MOVIES tab, but they are listed in the Movies folder in Finder. What can I do with iDVD either in CREATE A DVD or MAGIC IDVD to be able to burn several episodes to one DVD disk. I'm a new Mac user so please be simple with the steps to accomplish this, since I'm still learning.
Thanks!

Welcome to the forums!
DVDs are not concerned with file size, only total length, which is 2 hours (including up to 15 minutes of menus etc) for a single layer DVD.
However, it is against the terms of use of these forums to discuss the copying of copyright material, which a TV series certainly is.
So I am unable to help you further.

Similar Messages

Using "One Step DVD from Movie" on my IMac 10.8.6 using Verbatim DVD-R ("Life Series") 4.7 GB 16X 120, I get a wide angle version of my two minute story rather than the 3X4 standard aspect ratio that I normally get and want. Help!

While using "One Step DVD from Movie" using DVD-R Verbatim ("Life Series" 4.7 16 X 120 min) on my IMac 10.6.8 I get a wide angle aspect ratio on the DVD not the standard 3X4 aspect ratio. The Quicktime Movie is is standard 3X4 aspect ratio and the video video footage is standard 3X4 aspect ratio? Advice will be greatly appreciated.

Try this basic troubleshooting fix :
1 - delete the IDVD preference file, com.apple.iDVD.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete IDVD'S cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iDVD folder.
Click to view full size
3 - reboot.
4 - launch IDVD and try again.
Personally I would not the the one step method but create the iDVD project from scratch so you can make sure the widescreen option is not selected in the preferences and you can follow this workflow:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

I'm wifilooking at purchase a ipad2 3G/and I was wondering can I transfer DVDs (from a TV series for instance) from my Macbook pro. If so what is the best software. I already have Popcorn and Titanium toast. Thanks

I'm looking at purchase a ipad2 3G/wifi and I was wondering can I transfer DVDs (from a TV series for instance) from my Macbook pro. If so what is the best software. I already have Popcorn and Titanium toast. Thanks

THANKS FOR YOUR REPLY, I DOWNLOADED HANDBRAKE BUT WOULDN'T LET ME USE IT BECAUSE I DIDN'T HAVE VLC WHICH I DID. WHEN I FINALLY GOT HANDBRAKE TO WORK I SELECTED THE DVD FOR SOURCE AND IT STARTED SCANNING. A HALF HOUR LATER IT SAID NOT RECOGNISE SOURCE. TAKE IT IS ENCRYPTED.
<Edited by Host>

Any onboard software to create DVD from ppt file?

Hi Folks,
I am wanting to create a universal DVD from a Power Point presentation I created for family members. It is a collection of mostly static photos in a memorial I created. Do I have any onboard software in my HP Pavilion dv6 to accomplish this (without having to go slide-by-slide and adding sound, two annimations, etc)?
Thanks

Welcome to the HP Forum!
Jim54929 wrote:
Hi Folks,
I am wanting to create a universal DVD from a Power Point presentation I created for family members. It is a collection of mostly static photos in a memorial I created. Do I have any onboard software in my HP Pavilion dv6 to accomplish this (without having to go slide-by-slide and adding sound, two annimations, etc)?
Thanks
Hi Jim54929,
It would help greatly if you were to identify your dv6 notebook PC with more than just the series name. Look at my signature to see how I identified my Pavillion notebook. Include all alphanumeric characters. Also include the installed operating system when you reply to this post.
Kind regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Creating an animation from a series of image, snow leopard Quicktime 7 fails

Quicktime 7 allowed a user to be able to select a series of images and create an movie file with a time interval..
The Quicktime 7 for Snow Leopard from the Snow Leopard Installer dvd does not allow you to select more than one image..
How can I create a movie from a series of images jpgs.s...
We do scientific work climate modeling and this was a great tool to create animations..
Where did it go.. there is no ability to do this in Quicktime X..
Does anyone know how to make this functionality work?

Ok I got it...
Just select the first frame and then you get a dialog box that sets the time interval...
It AUTOMATICALLY selects all the rest of the images if they are sequentially numbered...
doh..

RECORDING DVD FROM VCR

HOW DO I RECORD A DVD FROM A VCR? I BOUGHT A APPLE MINI-DVI TO VIDEO ADAPTER AND A S CABLE ADAPTER, IT ALL HOOKS UP, BUT IT DOESN'T SHOW UP AS BEING THERE. HELP! ANYBODY! I WOULD LIKE TO DUB MY CHILDS MOVIES OF WHEN SHE WAS YOUNG BEFORE THEY ROT AWAY ON VCR TAPE. ANY SUGGESTIONS?
imac G5 20" Mac OS X (10.4.5) just received

FYI.
I recently purchased the EyeTV 200 (Firewire).
A refurb direct from Elgato for $200.
(http://www.elgato.com/indexfr.php?file=shoponlinesh
opeyetv200refurb)
Yeah, I got the "200" because I'm transferring 300 training sessions from VHS to DVD. I use the RCA inputs (three wire plug type - white & red (sound) and yellow (video)). EyeTV200 does a fine job.
I also use our Canon GL2 to pass the video through the camera via firewire into my Intel iMac. I find EyeTV 200 easier (and I can watch and record TV!) while at work! (WaaHOO!)
This is for the analog signal. TEh EyeTV 500 is for
digital cable.
Didn't know that. Saw the "500" but thought it was for HDTV only. Thanks for the info.
Comes with EyeTV software which allows you to view a
TV guide (titantv.com) and click what you want to
record.
True! You can even schedule it to record like a VCR. I set it up to record "Amazing Race" before leaving work because the program comes on late and I wanted to see it. Got to work and there it was!
Has S-Video as well as Composite video and stereo
audio inputs.
So true. I also have a VCR with S-Video and it works just dandy with EyeTV 200.
I'm in the process of putting my videos onto DVD with
it.
Let's you save directly as MPEG 1, 2, or 4.
Also exports to DV, iPod, H.264, DIVX, HD720, HD1080.
etc.
Between this and iDVD and iMovie HD, it's some pretty
wicked stuff.
Ain't it so! Two happy EyeTV users playing on their Macs!

Is it possible to boot to a Windows 7 install DVD from an external USB drive on current iMacs?

On the iMac I'm currently using, a mid-2007 24-inch, it's impossible to boot into a Windows install DVD from an external drive: I can hold down option on boot, and all my hard drives come up, but if the Windows disc is in my external DVD drive, it won't show up. I'll soon be upgrading to a late 2012 iMac, and I'd like to be able to install Windows 7 for a boot camp partition. Since that iMac has no built in drive, I'd like to know if using an external DVD drive will work on that model. I'd like to do that, seems easier than messing around with disk images. But we'll see...

You can use an external optical drive to install Windows without any problem with a Late 2012 iMac.
The reason that you couldn't install Windows from an external optical drive on the 2007 iMac is that it has got an internal SuperDrive, so Apple only allows you to use it to install Windows on your iMac

Help with getting high quality DVDs from AVCHD footage

Hello,
I know enough about video editing with PE7 to be dangerous, and was hoping someone could help me out.
My question is regarding getting the highest quality standard DVD from AVCHD footage. I have a Sony HDR-SR12 camcorder recording in AVCHD. I am editing footage natively in AVCHD with PE7 on a quad core system. No problem with that. However, when I export to standard DVD the quality of the video goes down drastically. (Yes, I know burning to Blu-ray would give me higher quality, but I am giving this DVD to a friend who doesn't have Blu-ray).
So far I have tried starting my project in both HD 1080i 30 5.1 channel:
General
Editing mode: HDV 1080i
Timebase: 29.97 fps
Video Settings
Frame size: 1440h 1080v (1.333)
Frame rate: 29.97 frames/second
Pixel Aspect Ratio: HD Anamorphic 1080 (1.333)
and Full HD 1080i 30 5.1 channel:
General
Editing mode: HD 1080i
Timebase: 29.97 fps
Video Settings
Frame size: 1920h 1080v (1.000)
Frame rate: 29.97 frames/second
Pixel Aspect Ratio: Square Pixels (1.0)
But I see no discernable difference in the quality of my output onto DVD.
This is where my knowledge is lacking...how can I get the best quality output from my AVCHD onto a standard DVD? Is there some format I can convert to first, and then burn to DVD? Also, I am willing to break the footage into a couple of DVDs to improve the quality, but I don't know how or what to do for that.
My footage looks REALLY great when viewing from the HDR-SR12 direct to HD TV with HDMI cable, but not very good on the DVD. My footage is of a ballet recital, and I lose definition in the faces, costumes, etc on the DVD output.
Any help is appreciated! Thanks!
Gina

Hey Gina,
This may be a year late, but as I have been pulling my hair out trying to solve this problem for the last 48 hours I finally did find somewhat of a work around, but it requires Adobe PP CS4.2.
There is a plug-in here:
http://www.mainconcept.com/site/prosumer-products-4/mpeg-pro-hd-7850/features-7861.html
Which will actually output your edit as an AVCHD file. You can then burn this straight to an AVCHD using Nero 9 and keep the highquality level of your clips and not need Blu-Ray. The DVD player will need to be AVCHD capable, but I just bought one of those for $40 as compared to the $200+ of most Blu-Ray players.
Hope that helps.
Regards,
DSW

Making Playable DVD From Disc Image

A friend of mine has an iDVD project but his mac cannot burn dvds. So he gave me the file as a disc image. I dragged and dropped the disc image to the dvd and hit burn. It does not play as a dvd in a player or in frontrow on my mac. When I double click on it the disc image is on the dvd. Did I make a data dvd instead? How do I make a playable dvd from a disc image?
Also, is going the disc image route the easiest way to transfer an iMovie or iDVD project to another mac. I did it this way because my mac does not have some of the music or photos on it that are linked to the project file. In Garage Band you can save as archive when transferring a file to another mac and it saves all the loops, etc in the file. There must be something similar in iDVD.
Thanks in advance for any help.
Paul

So he gave me the file as a disc image. I dragged and dropped the disc image to the dvd and hit burn.
Paul,
Video DVDs are written in the UDF format. That's why you must use Apple's Disk Utility to burn a disk image to writable media correctly.
In burning from the Finder, you have created a data DVD in Mac OS Extended format that will NOT play in set-top DVD players (as you have found out).
F Shippey

DVD from USA on a Mac in germany!

Hi everybody!
I have a MacBook Pro (os x lion), i bought it 4 moths ago. I've just realized, that my mac cannot read DVD from USA. So my question, is there way to change this so that my mac can read every formate? If yes how?
Thank you all

You can also change the region of your built-in optical drive, but it will always be set for just one region, and you can only change the region five times before it locks permanently onto the last region set. Thank the motion picture industry for this nuisance.

DVD from TS folder

Hi, I created a DVD and kept the video TS folder but deleted the original video assets. Is there a way to burn a new DVD from the data in the video TS folder?
Steve.

That little search button over there - - - - - - - - - - -- - - - ->
is helpful:
http://discussions.apple.com/search.jspa?objID=f952&search=Go&q=DVD+Copy

DVD from a Hard Drive Camera.

I wanted some feedback on YOUR best way to make a DVD from a Hard Drive Camera. I have the Sony 60 GB HandyCam. It's great. I have many programs to create a DVD and edit them. Some are Quicktime Pro with MPEG 2 converter to 4 then to Streamclip, CaptyDVD, VisualHub, ImageMixer.
When converting to StreamClip , for instance, which formate is best????
I have found that the QuickTime Pro/2 to 4 converter then into iDVD gives me the best results. Then right to iDVD.
The Visual Hub program is great but it gives me the letter box effect. I rather have the true 16x9 formate.
Any other ideas or programs out there YOU like?
Thanks in advance, Don
MacBook core 2 Duo Mac OS X (10.4.8) iMac G4 flat panel

now we put the cart before the horse ...
mpegs are not meant for editing, any further processing; mpegs are a delivery- and playback format...
if you like to do editing (adding titles, music, disolves etc), use a recording-device which supports a codec which is MEANT for editing.. as "dv", on miniDV ...
Streamclip support basic editing (e.g. erasing parts)...
and the loss of audio by using Quicktime for convertign mpegs is another cup of tea ...
nack to your Original Post:
Capty is best in terms of quality, because no triple-conversion is needed, as long as you "burn" videoDVD with Toast or Sizzle ..
Streamclip (+mpeg2 plug-in) is best in terms of "options" ( you can edit AND convert)
DVD2DV is best in terms of usability .. one-click-only
VisualHub is best in terms of flexibility (swiss army knife converter)
ffmpegX + Sizzle is best in terms of cost - free (iLife comes preinstalled)
... and DVD as recording media is NEVER the best, compared to any/most miniDV camcorders... less usabilty (= not supported by iLife, needs additional processes etc), less quality AFTER adding anything/editing/processing, ...
so, back to Square One - get a miniDV for movie making ..

Dvd from tapes

What is the easiest way to make a dvd from vhs or dv tapes?

If you have VHS tapes, you need to run the output of a VCR through an analog to digital conversion box into your computer. If you have DV tapes, and your camera has a firewire output (or 1394 in Sony parlance), you may be able to feed it directly into your computer into iMovie.
I've used a Canopus ADVC-55 analog to digital conversion box, which plays well with macs. There are other vendors with similar products.

Dvd from eyetv

What is best way to make a DVD from a tv show recorded by eyetv?

Sounds like a very good idea... but have you seen Subtitler:
http://www.versiontracker.com/dyn/moreinfo/macosx/26322
Not to say you won't make a better version, and I'd be delighted if you did! Manipulating subs in DVDSP is not something I do any more - I use an external text editor for any job where more than a few subs are needed.
The problem in DVDSP is that you cannot extract the subs directly, you have to export an track item description which has the subs and time code buried within the XML. You might find that PHP will give you a web based tool to extract the subs and time codes and write a text file, which you can then manipulate.
In fact, wouldn't a web based tool be a good idea? People could upload the track description, it would export the subs and you could get it to adjust the timecodes and write a text file back in the correct format to import back in to DVDSP. Once the subs are in a text file it is a simple matter to manipulate them further...

Dvd from tv not working.

I have recorded video on a DVD from my tv and dvd recorder. When I take the DVD over to the computer it is seen as blank. It plays fine on the tv/dvd recorder. Is it the media? The DVD's are Matishitu i think. Should i shell out for better quality DVD's? Does anyone have a suggestion as to what brand of blank DVD I should buy? Does anyone have any other ideas on what the problem might be?

Hi and welcome to Discussions,
because this has happened to me once:
Did you made sure that the DVD-Recorder has 'finalised' the DVD ?
If not this most likely causes the iMac to see it as blank.
Regards
Stefan

DVD from TV Series

Similar Messages

Maybe you are looking for