DVD main track won't play on standalone DVD players

Hi!
I have a problem and I was wondering if anybody could help me here.
So, i got a DVD which I had to reauthor so I demuxed the disc with bbdemux and got an m2v and an audio file. I could import both files to DVDSP without using compressor. Than I added a first play track which is 20seconds long and after it goes to the menu. The menu has a main play button and a button to the track selection menu. I added the demuxed files to a second track, created the chapters, linked all the buttons, defined everything about the dvd. Then I built it and then burned it. It was all working in DVD Player and VLC, then I tried in my standalone DVD player and everything worked just like I wanted until I pushed the play button in the menu and it kind of blocked, it showed me the first frame of the chapter and it stopped. Nothing happened but the timer on the DVD player was counting. I tought I might have f*d up the bitrates, so I lowered them, no difference. Then I deleted the first track, left only the menu 'cause I tought it was "confusing" him. No, then I deleted all the menus and burned the disc only with the main track but no luck... I know it has to do something with the track files but what??? I have a JVC DVD player and it always played every dvd 'till now... I don't know what's the problem... Please help! So, it kind of freezes on the start of every chapter.

so I demuxed the disc with bbdemux
You can try MPEG Streamclip to extract the original encoded files from the DVD. Probably the other demuxer did something to the original tracks.
Hope that helps !
  Alberto

Similar Messages

  • The DVD I burned won't play on my DVD player

    I filmed my son playing a concert on my iPhone.  It is about an hour long.  I was able to make it into a quick time movie.  I figured out how to bun it on to a DVD throught Finder, but the DVD won't play on my DVD player or the Mac DVD player.  What am I doing wrong?

    Did you use iDVD to create the video DVD for playing? 
    Open iDVD, select a theme and drag the exported QT movie file into the open iDVD window being careful to avoid any drop zones.
    Follow this workflow to help assure the best quality video DVD:
    Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image  menu option. This will separate the encoding process from the burn process.
    To check the encoding mount the disk image, launch DVD Player and play it.  If it plays OK with DVD Player the encoding is good.
    Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality.  Always use top quality media:  Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
    If iDVD was not preinstalled on your Mac you'll have to obtain it by purchasing a copy of the iLife 09 disk from a 3rd party retailer like Amazon.com: ilife 09: Software or eBay.com.  Why, because iDVD (and iWeb) was discontinued by Apple over a year ago. 
    Why iLife 09 instead of 11?
    If you have to purchase an iLife disc in order to obtain the iDVD application remember that the iLife 11 disc only provides  themes from iDVD 5-7.  The Software Update no longer installs the earlier themes when starting from the iLIfe 11 disk nor do any of the iDVD 7 updaters available from the Apple Downloads website contain them. 
    Currently the only sure fire way to get all themes is to start with the iLife 09 disc:
    This shows the iDVD contents in the iLife 09 disc via Pacifist:
    You then can upgrade from iDVD 7.0.3 to iDVD 7.1.2 via the updaters at the Apple Downloads webpage.
    OT

  • I downloaded a movie with Quicktime 7 Pro onto a DVD, but it won't play in my DVD player.

    I downloaded a movie from the internet using Quicktime 7 Pro. I put it on a DVD so that I could watch it on my television. The disc isn't recognized and won't play on my DVD player. What can I do to get it to play?

    In addition to what Gary listed - VisualHub (direct download).  If you have issues with the direct download, you can obtain VisualHub directly from this site - http://www.wyodor.net/MoreEmbed/embedmedia.html

  • Purchased Movies burnt to dvd-r/dvd+r won't play in standalone dvd player

    My panasonic dmr ex-77 plays all kinds of discs including the above. Having purchased from the ITunes store, making copies of the movies in both types of dvd, both are not recognised by my panasonic dvd player. I have tried others recorded on the panasonic and these work.
    Is there something that I'm not doing right in the mac environment when burning these movies?

    They are DRM protected. You cannot burn itunes movies.
    "You shall not be entitled to burn Video Products "
    http://www.apple.com/legal/itunes/uk/terms.html

  • CD/DVD R discs won't play in Sony DVD player system.

    I have just backed up my music and photos on CD R and DVD R discs on my new Macbook Pro. None will play on my Sony player. I previously purchased CD RW from Verbatim recorded on my Powerbook G4 and they play fine. I know there is technology change here, but what should I buy? For instance, can I still purchase discs that would play in my 4 year old dvd player or is that a waste of time? Do I need a new player?

    I'd suspect the player since it is 4 years old and especially since it is a Sony who was slow to embrass that technology in the DVD players.
    Before I bought my DVD player to play MP3 , I made a MP3 CDR took it to a store and played the disc in all the different models. Sony were the worst at the time. Heck within the same model one would play the disc and the other not.

  • I used the download Burn to burn my iMovie onto a dvd.  It won't play on my dvd player.  Is there anything I need to do?

    I made a movie using imovie.  I have a macbook pro 11.  So I don't have iDvd.  I used Burn to burn a dvd.  It works on my computer.  But not in a dvd player.  Is there something I'm missing?

    Is there something I'm missing?
    Yes, iDVD.
    Yes, there are other programs that will put a movie on a DVD.   I have tried most of the other substitutes including Toast, Burn, DVD Creator, Wondershare, and others.  None of them come anywhere near the ease-of-use and power of iDVD. IDVD is specifically designed to work with iMovie.
    http://www.apple.com/findouthow/movies/idvd.html
    With iDVD you can easily and quickly create DVDs with menus and graphics almost on the level of what Hollywood can do.
    IDVD is easy to get. It is available on disk as part of iLife 11.
    IDVD is a wonderful piece of software and well worth the low cost of $40.  (works with all Mac OS 10.5 and newer.)
    http://www.amazon.com/Apple-MC623Z-A-iLife-VERSION/dp/B003XKRZES/ref=sr_1_1?ie=U
    http://dealmac.com/lw/artclick.html?1,527850,1872219

  • Slideshow Music tracks won't play

    I've tried various iTunes tracks and the perinstalled Aperture themes like Ken Burns, holioday mobile and cuts from the Sample music folder. The tracks won't play in the slide show proper or in the music pane. And it dsoesn't matter if the tracks are added as the main or secondary tracks.
    Ive rebuilt and repaired the library, deleted the Aperture plist file from ~Library>Appleication Support>Aperture and removed the presets folder. I've also done a Disk Utility permissions rebuild, Aperture permissions rebuild, Aperture Database rebuild, etc.
    What I discovered last night is that Aperture will crash whenever I select Aperture>Presets>Slideshow. Selecting the other presets is fine and the appropriate dialogs will present themselves. When the Slideshow preset is selected, a minature ghost image of the dialog appears for about 2 seconds and then the app crashes.
    Here's the first part of the crash log. Any help will be gratly appreciated because I'm trying to put together a slide show for my niece's wedding!!
    Regards,
    CS
    Process:         Aperture [403]
    Path:            /Applications/Aperture.app/Contents/MacOS/Aperture
    Identifier:      com.apple.Aperture
    Version:         3.1.2 (3.1.2)
    Build Info:      Aperture-1530000~2
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [186]
    Date/Time:       2011-06-06 10:10:25.391 -0500
    OS Version:      Mac OS X 10.7 (11A459e)
    Report Version:  9
    Interval Since Last Report:          279393 sec
    Crashes Since Last Report:           20
    Per-App Interval Since Last Report:  15182 sec
    Per-App Crashes Since Last Report:   17
    Anonymous UUID:                      C981776F-DB4A-4766-957A-4AE5E95C87EF
    Crashed Thread:  0  Dispatch queue: com.apple.main-thread
    Exception Type:  EXC_BAD_ACCESS (SIGSEGV)
    Exception Codes: 0x000000000000000d, 0x0000000000000000
    VM Regions Near 0:
    -->
        __TEXT                 0000000100000000-0000000100adb000 [ 10.9M] r-x/rwx SM=COW  /Applications/Aperture.app/Contents/MacOS/Aperture
    Application Specific Information:
    objc_msgSend() selector name: ID
    objc[403]: garbage collection is OFF
    Performing @selector(a_orderFrontPresetEditor:) from sender NSMenuItem 0x10216ac00

    Sorry, I should have given more details but I've posted variants of this question in many places already, moving to a different forum when advised to by others because it really does seem to be a multi-application problem.
    I was sent the slideshow as part of an .rcproject file. They had tried to create a DVD but had been unsuccessful, so just sent me the project from which I could view the slideshow complete with soundtrack.
    To find out how it should have been done I asked here about the easiest method in iLife to create a DVD from a slideshow and was told iDVD, but when I added the movie files back in as an intro the slideshow soundtrack disappeared and I couldn't find out where to or how to get it back.

  • TS2289 Audio Track Won't Play

    I imported an audio clip yesterday and it worked fine. Today when I opened my project, there was a yellow warning triangle in the top left above the first frame of my movie and the audio track won't play. What should I do?
    And where the heck is the "clock buttom"? I wasn't able to follow Apple Support's suggestions because I can't find it.
    Mike

    I've adjusted my project according to Brian'statement, so I made all audio tracks and video track the same length, but it still doesn't work when I create the flash file. It plays only 1 audio track, whatever language you choose. It plays the audio track that is"active" in the project. This happens only with the flash. If I burn a DVD, then everything works fine... Am I doing something wrong ?

  • IDVD burned discs won't play on any dvd player

    When I burn a dvd using Idvd they will not play on standard dvd players.
    Is this a problem with anyone else?
    I noticed it was a problem in the early 2000-2003 but apparently something got fixed, because I couldn't find an incident where this problem continued to occur.
    I am new to the Mac world and I don't always understand the acronymns used when I read responses.  However, here is my problem.
    Burning dvd's using Idvd:
    1.  the burn seems to run and function normally
    2. when I insert the burned dvd into a dvd player one of the following things occur:
         a) loading takes a very long time, then I get a message saying "wrong disc"
          b) loading occurs fast, reads the file as a dvd, the dvd begins playing the music and showing the main menu screen, after accessing a menu option the dvd begins to play the slideshow with the music then after a minute or two, it freezes, and is no longer readable when attempting to reload it, the message is "wrong disc"
    3.  I've tried using dvd-r, dvd+r, dvd+r dual layer, and changing the burn speed to 8x, then to 4x and then to 2x.  Nothing seems to matter.
    4.  I have noticed that in Idvd the dvd type is for an older version of dvd's such as single layer 4.2 gb and double layer 7.7 gb. I'm wondering whether the Idvd software on my MacMini is up to date, even though when I check for updates under the apple it comes back saying my system is up to date.
    I'm using a MacMini running Mac OSX v 10.6.8 with processor 2.26ghz, Intel core 2 duo, memory 2gb 1067 mhz ddr3, and my dvd drive is a pioneer dvd-rw dvrts08, firmware q81f.
    I really need help to fix the problem with the IDVD software or to know that I need to purchase another DVD maker software for my Mac.  The product below says my Mac is running OS X v 10.7.2 but it isn't it is running v 10.6.8 as I stated.
    URGENT!!!!

    My macmini is under 2 years old.  I reviewed your list of affects and I am going down the list to determine possible cause and effect.
    I did try the PRAM process.  The DVD still won't play on my DVD player but it did play on my son's Sony blue ray.  I burned it at 2x burn rate after the PRAM process completed. 
    I can assume that's progress.  The audio did however skip a couple of times while playing.  That is new.
    I will continue down the list using different type of blank dvd's etc. 
    Question: As I was reading through some other issues I'm learning that Mac/Apple is discontinuing IDVD, is that correct?
    Are you aware of some other software to purchase that will create dvd's on the mac?  If so, I may as well go that route rather than wasting more time using a defunct product.  What is your opinion?

  • I clicked "locate" when prompted, now the track won't play at all even from the hard drive though it's listed in iTunes. Can anyone help?

    I was prompted to "locate" a track, clicked yes, and now the track won't play no matter where I play it from. I've put it on the desktop, added it to library, tried everything - is there an equivalent "reconnect media" function like in Final Cut Pro? I'd be grateful for any help thanks

    Will it play in Quicktime player?  If not it may be corrupt and will have to be reloaded from the original source.

  • Encore DVD Writing Cancels won't play on DVD player issue

    So I have a very confusing issue with encore.
    When I press build everything works fine. Then writing begins. The moment the writing reaches the end of the progress bar (the exact moment)  the progress bar goes to empty and the bottom bar says canceling and ejects the DVD. Usually (not every time) a pop up menu saying "end of file" appears next. When I press ok for end of file message the pop up disappears and suddenly the DVD progress bar is filled and the DVD says completed (as if nothing just happened). So I'm confused whether it worked or not!
    I reinsert the DVD that just ejected into my Mac and it works! Then I put it into a DVD player and it won't play, it won't play on my old Xbox 360 either, but it WILL play in a Bluray player?! 
    Everytime I rewrite the files I get different results. They all work on my Mac and blu ray but only 1 of 4 works in the Xbox. The one that does work in the Xbox will read in the DVD player but plays choppy and  skips  around as if the DVD is scratched or damaged?
    ! Other differences involve the write speed, sometimes the options are 8x or 4x. Other times its 3x,2x, and 1x. When the latter write speed options occur I cannot press "test before writing" it's greyed out. When 8x and 4x are the speed options I can check it.  I used different DVDs and it didn't help.
    I work for a company that needs to copy the DVDs but they can't be copied. Don't know why? 
    Here are my settings
    Mpeg 2-DVD exported from Pr.
    720x480
    Codecs: Mpeg video, Mpeg layer
    Duration: 1:10:26
    Encore DVD transcode status: Don't Transcode
    Encore Project/assets
    2 Menus
    1 Mpeg video
    1 Timeline
    Build
    Format: DVD
    Output: DVD disc
    Source: Create Using current project
    4.7 gb disc
    Has 510mb free
    All regions
    Unlimited copies
    First Play and title button are a menu
    Check build is good.
    I really need help with this weird issue quickly thanks.

    Just an Update, I've tried many things to no avail still have a few others to try. Being a Large file it takes a while to try things.
    I went ahead and got Toast, but considering that the Image Iso and the DVD Folder both gave me the End of File Error and the Disc "Failed Completed" Error I figured it a no go and it was. It did however give me something that Opened everywhere (Mac,Xbox,Dvd) , but it did not play on the Dvd correctly.
    I've done numerous things in the Mac permissions end Like trying as a different user and running as the Root User, but it was also unsuccessful.
    I've Re- Exported the file many different ways, but finally had a breakthrough using a version of M2v.  It's definitely an error with Finalizing. My disc previously began to mess up and give "END of File" after it finished writing, it never even made it to the "Writing Lead Out" stage. I beleive this is why it plays it certain places fine, but probably not as well in systems (like Dvd players) that require those last few steps like writing Lead Out. 
    The only issue I have now is that when I put it into the DVD player it say "No title"!?!? AY CARAMBA!!!
    Now I'm working on trying to figure this NEW problem! I have all my menus and links in place, but no go. I think it may be related to the previous problem in that something beneath the surface is wrong with my computer. Being a used Mac with a restored Hard Drive there are probably endless possibilities, but I hesitate to think that way because it may also have absolutely nothing to do with it.
    So any help is greatly appreciated
    whether it be a specific issue you know of dealing with used Macs and issue similar to mine
    or just on the "NO Title" error as a separate issue. I'm hoping this "No Title" is something simple and unrelated,  I've already burned through about 13 discs and even more pain pills for the headaches!!

  • Copying/burning a dvd, won't play in a dvd player

    Before my disk drive was replaced I could take a dvd, copy it and burn it to a disc (i.e., make a copy for myself), ad it would pla in my dvd player
    Since then when I make a copy of something and burn it, it won;t play in ant DVD player. Will play onthe computer though
    What settings do I need to change?

    Musicwind is right, there's no way to do what you describe without third-party tools. A commercial DVD, like what you'd be using in a DVD player, cannot be copied using the Finder or Disk Utility, due to copy protection issues. Are you using something like Handbrake to rip the DVD, or is this not a commercial DVD that you're copying?

  • Updated OSX - DVD-R's won't play now

    A few weeks ago, I updated to 10.3.8, then 10.3.9, and now DVD-R's won't play anymore. The drive doesn't recognize them. These are DVD's that played fine before, in fact some of them are DVD's that I burned on this machine.

    Edit, it is impossible to update 10.3.9 online to 10.4.9.
    Only 10.4 up to date, 10.4 on CDs (which can be gotten from the media exchange program if you have 10.4 on DVD), 10.4 on DVD would bring you to a 10.4.9 updater compatible 10.4. Since you initially had 10.3.8 according to your initial post, something doesn't jibe about what you are saying. Where did you get 10.4 to update your 10.3.8 or 10.3.9?
    Also if your machine came with 10.3, what happened to the 10.3 installer DVD that came with it?

  • I'm burning dvd's that won't play on a regular dvd player.  What am I doing wrong?  Are there some simple things to check to figure this out?  (Sorry, I know this has been asked many times)

    I'm burning dvd's that won't play on a regular dvd player.  What am I doing wrong?  They play fine on computers but not on dvd players.  Are there some simple things to check to figure this out?  (Sorry, I know this has been asked many times).  Created in DVD studio pro.

    Hi
    Just my thoughts to add to the excellent answers above.
    • BRAND of DVD used - Matters when doing Video-DVDs
    Memorex, NoName etc cheap brands usually do NOT work
    I only Use Verbatim (more organic dye in these)
    • Type of DVD - matters
    - DVD+/RW - usually results in problems
    - DL-DVDs are more problematic than SL-DVDs
    - DVD+R are a more modern sort - BUT PLAYS BADLY or not at all on older DVD-players
    I only use DVD-R
    • BURN SPEED - matters
    - Best in iDVD app - IS NOT BEST at all but results in lot's of Burn Errors = Doesn't play well or at all
    I set this down to x2 or x4 max.
    Yours Bengt W

  • Burned DVD-R won't play in domestic DVD player

    Why a DVD-R i burn won't play in a common domestic DVD player, even the most recent and good quality ones ? Is there something else i should do before burning ?

    How did you burn it? If you dragged the files to the dvd in finder and then hit burn it won't play in a dvd player, but if you used iDVD it should work.

Maybe you are looking for