DVD not burning music issue

Can anyone help me. I've encountered a very odd problem. I exported a slide show with a music from Iphoto. It's now in quicktime and when I imported it into IDVD it plays with the music and during the preview. It even plays when I open it in quicktime with the music. But the problem arises when I attempt to burn the file through IDVD to a disc. I've tried each time and each time unsuccessfully the audio portion of the slide (which has the music) doesn't burn onto the dvd. The slide show with images burns perfectly, but not the music. Any assistance on this would be greatly appreciated. Thanks!

I am having the exact same problem with this slight variation. I made the slide show in Keynote. The music is a soundtrack I downloaded from iTunes. Everything works perfect in preview. When I burn the DVD, the music works fine when the menu is on screen, but when you go to play the slideshow, it stops. So I tried burning it again but this time with the slideshow starting automatically. Again, no music during slideshow, but when you stop the slideshow and go to the menu, the music starts. Arghhh!!!!

Similar Messages

  • Dvd not burning properly, not recognized by DVD Player

    I have not burned video DVD's for several months until this week when I find that disks burned from disk images created by IDVD no longer burn properly. They are not recognized by Apple DVD player or on two different commercial players that I have.  The disk images can be played with Apple DVD player, but once burned to disk, I get a message Disk not Supported.  I have tried burning disks from 3 reputable brands with the same results.  I just updated to OS X 10.8.5.  Anyone have any suggestions?

    Another thing to check is your bitRates and whether you encoded the audio to A.Pack/Dolby. I have often seen machines play once or twice then start having playback issues or not play. It can be related to the encode rates (and it may not behave across different machines the same way, in other words it will continue to play fine on some players and not another)

  • Burning Music issue

    I was planning on burning some music from iTunes on to a cd, so i put the cd in, and I put all of the disc info in. When I pressed "burn" it said "disc burner or software not found." What does this mean, and how can I fix it?

    Post over in the iTunes forum area. 
    This area is for iPod Nano technical issues.

  • DVD Drive & Burner App Issues

    Hey guys, I've searched the forums for several days on this but can't see to find the fix.
    I've been running Arch for about 2.5 years, upgrading daily, and all was going well, but yesterday I decided to do a fresh Arch install.  The new install went fine and I'm using it now, but I'm having some troubles with my DVD drive and any CD/DVD burner apps that I try to use.  Those same apps worked perfectly in my old install.
    K3b now launches very slowly on the first start but it does detect both, my dvdr, and cdrw drives.  However, on a K3b restart during the same Linux session, it only sees the cdrw drive.  If I reboot and restart K3b, the process is repeated.
    Graveman just hangs on trying to detect my drives on the first start, and it has to be killed manually.  It never gets past detecting the first drive.
    cdrecord gives this:
    $ cdrecord -scanbus
    scsibus1:
    1,0,0 100) 'PLEXTOR ' 'DVDR PX-740A ' '1.01' Removable CD-ROM
    1,1,0 101) 'PLEXTOR ' 'CD-R PREMIUM ' '1.06' Removable CD-ROM
    1,2,0 102) *
    1,3,0 103) *
    1,4,0 104) *
    1,5,0 105) *
    1,6,0 106) *
    1,7,0 107) *
    fstab looks like this:
    $ cat /etc/fstab
    # /etc/fstab: static file system information
    # <file system> <dir> <type> <options> <dump> <pass>
    none /dev/pts devpts defaults 0 0
    none /dev/shm tmpfs defaults 0 0
    /dev/dvd /mnt/dvd udf,iso9660 ro,user,noauto,unhide 0 0
    /dev/cdrom1 /mnt/cdrom udf,iso9660 ro,user,noauto,unhide 0 0
    /dev/sdb1 /mnt/flash vfat user,noauto,noatime 0 0
    /dev/fd0 /mnt/fd0 vfat user,noauto 0 0
    /dev/sda6 / ext3 defaults 0 1
    /dev/sda7 swap swap defaults 0 0
    /dev/sda8 /home ext3 defaults 0 1
    I didn't have any modules in rc.conf before the new install and all worked well, so I didn't put any there this time either.  I've tried reinstalling K3b, Graveman, and the kernel, but none of that helped.
    It seems to me that this all has something to do with the new drive naming scheme, but I'm not sure.
    Anyone have any clues on a fix for this one?
    Thanks in advance.
    oz

    Hi, T-Dawg 
    Yep, graveman still hangs, so it might not really be K3b's fault, but a possible kernel problem instead.  However, the current kernel works fine with the previous version of KDE.  In the bug report mentioned above, someone claimed this issue will be fixed with the 2.6.22 kernel, so I guess we'll know soon enough.
    Command line burns work perfectly so I'll keep using that and skip on hard coding the device to sr0 for now.  Might do that if the new kernel doesn't work, though.
    Thanks for your help.
    oz
    Edit:  I've tried k3b 1.0.3-1 that just came out earlier today, but it has the same problem.  Gotta go all the way back to version 1.0.1 to get things working again.
    Last edited by ozar (2007-07-23 16:18:16)

  • Cd/DVD not burning.  Error Code 0x8002006E when burning DVD's

    I have a MacBook Black and am trying to burn cd's and dvd's. I have tried multiple brands of DVD and CD and can get the cd's to burn once in a while with a microboards printable cd. When they don't burn I get either an error saying something about not being able to calibrate laser power, or it goes through like it's burning and shows up on the desktop, but when I go to open the disk, there is nothing on it. DVD's never finish, giving me the error code 0x8002006E. It will also not read any DVDr's on the machine. Stamped DVD's (store bought)are fine, but multiple brands of DVDr will not read. All of the burned DVD's I have are personal movies and music videos that I made on the machine. Anyone have any suggestions? Is my superdrive toast?

    You can check in system profile and select disc burning to verify what cd/dvds are readable by your superdrive....Also with that error message you can try removing any extra ram chip installed, with that model powerbook it also has onboard ram built into logic...being a disc reading problem id say its the superdrive itself, you can try cleaning the lens with those cleaning discs you buy from electronic stores..Burn disc whilst running on power adaptor and not battery...
    just a few things to try might help you

  • DVD not burning.

    I am trying to copy a disk image onto a DVD. I get the message, "Unable to burn. The device failed to respond properly. Unable to recover or retry." Is the "device" referred to the actual blank DVD or the DVD burner. Thanks. (If this post is a repeat, I apologize - think I lost the first one.)

    First you need to drag and drop the plist for iDvd to the trash (empty it) and restart your mac.
    com.apple.iDvd.plist
    Secondly, repair permissions.
    Thirdly, read these links:
    http://docs.info.apple.com/article.html?artnum=302925
    http://docs.info.apple.com/article.html?artnum=93006
    And lastly, burn a disc image first from the file menu within iDVD.
    Test the image with apple's DVD Player App. Assuming it plays as expected, then use apple's disc utilities / toast to burn at 4 x or slower.....slower is better.
    Make sure to use only Verbatim or Maxell DVD-R for troubleshooting on this iDVD forum.
    Good luck and I hope this helps but if not, come on back.

  • Why will my itunes not burn music anymore?

    I accidently downloaded a program that was for another music website, but when I unintalled and deleted it. My itunes stopped recognizing my burner. Help please.

    iTunes 10.3 is a beta so your current version is upto date.
    If you want 10.3 you have to download it from the Apple site.
    http://www.apple.com/itunes/download/
    Having said taht it seems I am out of date.
    Apple software update is showing it now, although still not in iTunes itself,

  • DVD not burning at 16X

    I just replaced the original CD-R with an LG 16X DVD-R in the G4 800 at work.
    Unfortunately it's not recording at 16X, only at 8X. I don't think it's the media, as it states it can be recorded at 16X, and I burned several ones already. Toast 7 indicates that it can burn at 16X, but as soon as the disk is inserted it goes to "best" and it takes 15min to record a full 4.7GB disc.
    Could the ATA 66 of the drive be holding back the speed ?
    I have a ATA TEMPO 133 PCI card. Would it be recognized by the OS if I connected the disk to it ?
    Thanks in advance
    Pedro

    Pedro,
    They burn at 16X (in Theory), they only reach "up to" 16X on certain parts of the disc. It sounds like your drive needs updated firmware to recognize the actual brand of media you're trying to use. My G4 actually burns at the 16X speeds and it's my G5 that lags big time (on certain brands)because of firmware. Todays recorders have a true average of about 12X. It also may be your HDD is not pumping the data fast enough through the pipes or it can be a faulty cable as well. It can be one of several things and I'd start with the cable, check it for any punctures or small tears and make sure it's connected securely on both ends. After that make sure your HDD is in good working order, run some good utilities such as Disk Warrior, Tech Tool or Drive Genius so you can be sure your directories and structures of your disk are OK. Try running Apple's hardware test (shipped with the computer) and see if the Logic Board and everything else passes.
    G5 dual 2.7, Quicksilver 2002, G4 (2001) Digital Audio 933*, TiBook 400 and a G3 B&W Mac OS X (10.4.3) Raptor 74 and many more...

  • Help Missing movie.  DVD not burning as shown in Preview

    I created a DVD Project using 2 movies and one slideshow (separate buttons). Plays perfectly in the Preview within IDVD. I burned the disc, watched on the DVD Player, and the button that should have the first movie, plays the second movie. The other two buttons work correctly. Can't find the other movie anywhere.
    I checked the Project Info. and it shows the correct asset listed for the missing first movie, also shows that it has encoded. The map view within IDVD looks correct also.
    I have 17.23GB available still on my PowerBook.
    Any ideas???
    I know that I should make a disc image and check that first. I was just trying to do it quickly as a gift. I'll check the disc image next.
    PowerBook G4, IMac G4 512Ram   Mac OS X (10.4.6)   1.5 gHz, 512 Ram, LaCie 250gb, Casio EXZ850

    Well....I fixed it, but don't know how necessarily.
    I did the following....
    1. repaired permissions.
    2. Told IDVD to look for movies on Desktop (where movie was)
    3. Deleted the old broken movie button & added the movie button again.
    4. Made a "Disk image", checked it, and burned from there through Disk Utility.
    PowerBook G4, IMac G4 512Ram Mac OS X (10.4.6) 1.5 gHz, 512 Ram, LaCie 250gb, Casio EXZ850
    PowerBook G4, IMac G4 512Ram Mac OS X (10.4.6) 1.5 gHz, 512 Ram, LaCie 250gb, Casio EXZ850
    PowerBook G4, IMac G4 512Ram Mac OS X (10.4.6) 1.5 gHz, 512 Ram, LaCie 250gb, Casio EXZ850
    PowerBook G4, IMac G4 512Ram Mac OS X (10.4.6) 1.5 gHz, 512 Ram, LaCie 250gb, Casio EXZ850

  • DVD not burning completely

    I've been trying to burn a project onto a double layer dvd. I changed the dvd type in the project info to double layer, so i really don't know what's going on. I have to make multiple copies, and i have made 3 succesfully so far. but after the third dvd, i haven't been able to actually burn another one. I've tried 3 times with other blank double layered ones, and it only burns partially. At the very end of the burnin process, before it is actually finished burning, the dvd just ejects, although the box on the screen still says that it's loading, so i cancel it. Then when i put the dvd in, only the menu will play, and when i try to select a video, it takes a while to load, then the screen just goes blank. I've gone through 3 double layered dvds that have been ejected too early and only have menus on them. I can't use them anymore since they now have stuff on them and i can't erase the menus on them with disk utility. I really don't want to waste anymore dvds because the double layered ones are expensive. I've tried making copies of the other dvds, but disk utilty keeps showing errors when i try to create a new disk image from one of the good dvds. i have to get four more of these dvds burned by friday, and i've been working at this all day and i really dont know what to do.

    I've also tried splitting the project in half into two different projects and burnign them on single layer dvds (i changed the project info dvd type) and they didn't burn either, the same thing happened.

  • I can not burn a cd from my iTunes as it says i have inserted a dvd disc

    why can i not burn music to a disc this msg is what comes up.
    This comes up first Disc Burner: HL-DT-ST DVDRW GA32N
    Then this comes up
    You have inserted a blank DVD but originally selected a CD format. Are you sure you wish to create a data DVD instead?
    And it will not let me burn pls help. Annoying

    You are positive you put in a CD?  You have tried another one?
    You have restarted the computer?
    How old is this drive?

  • ITunes 12.0.1.26 on 2009 Mac Pro will not burn disc - error message medium write error

    Just upgraded to iTunes 12.0.1.26 on 2009 13" Mac Pro with Lion.  Will not burn music disc and getting error message "The burn failed because of a Medium Write Error".  Is this version of iTunes compatible with Lion and if not how can I revert to previous version. 

    Just upgraded to iTunes 12.0.1.26 on 2009 13" Mac Pro with Lion.  Will not burn music disc and getting error message "The burn failed because of a Medium Write Error".  Is this version of iTunes compatible with Lion and if not how can I revert to previous version. 

  • Satellite A200-AH5 CD/DVD drive does not burn any CDs

    I own a Toshiba Satellite laptop (A200 -AH3) running Windows Vista Home Premium.
    For what it is worth, the processor is a T2085 @ 1.73 GHz. It is a 32-bit Operating System.
    In Device Manager when I click on DVD/CD Rom drives, I get TSSTcorp CD/DVDW TS-L632D ATA Device.
    Clicking on this I find that the driver is working properly and up to date. I have not been able to burn a CD on this system...
    I have not tried to burn a DVD.
    I have run through all the steps for burning a CD, however, but even though it goes through the process of showing the progress as each song from a playlist is burned to disc, when the disc is supposedly finalized...there is nothing on the disc when I try to play it back and with the exception of iTunes or another program opening when I place the CD into the drive to be played, absolutely nothing happens.
    I tried burning music on a disc on my sister's desktop computer and it burned fine.
    So...It is not a problem with the discs.
    When I took the disc my sister had burned and placed it in the disc drive on my laptop, it displayed the tracks that had been burned and it played the music just fine. This has me really thrown for a loop.
    The laptop is only a year old and I can't burn a single thing.
    Unfortunately, the warranty has expired. I am desperate to get this problem fixed. I have no idea if it will burn a DVD, but I have ruined 2 boxes of CD-R discs already. After the disc has supposedly burned the music...even though no music has been burned...the disc is ruined and has to be tossed.
    I am not terribly knowledgeable about techncal aspects of computers, so I hope you can speak to me in general terminology if you respond to my problem. I really hope someone out there can advise me as to what is going on or what I should do to resolve the problem.
    Thanks for any help in advance!
    Thanks.
    Gord
    Canada

    Hi
    In your case I would recommend trying different CDs from different manufacturers.
    You should know that not all CDs or DVDs would be fully compatible with your internal CD/DVD drive.
    In many cases not compatible CD or DVD would cause exactly the same issues which you have described in your message so try different medias!
    Furthermore I would recommend checking the Toshiba driver page for an CD/DVD drives firmware update.
    As Im not mistaken the Satellite A200-AH3 belongs to the Canadian series and you should check the Canadian page for some new firmware. Maybe a new firmware is available
    Last but not least you could switch to other burning software Im using the Nero In my opinion its the best applications for such purposes

  • Windows 7 does not recognize cd/dvd drive. Will not burn a disc

               In November 2013, I  bought a refurbished hp Compaq 7900 convertible minitower, Product No. NJ3226UC#ABA, 32-bit.  Windows 7 and WMP 12 were installed by the company that refurbished it.   WMP's  play, rip, burn, sync worked perfectly.
               I made the mistake of installing itunes.  I purchased music and made a playlist from my library and itunes.  I tried to burn the playlist with Memorex discs.  WMP burn would kick out the cd at 99% complete.  I tried a different brand of disc and had the same  problem.  The message each time was 'Windows Media Player Encountered an error while burning. Verify that the burner is connected properly and that the disc is clean and not damaged.'  I tried burning a disc using itunes burner but it didn't do anything.
               First, I removed every Apple application from my computer.  Then I ran Microsoft CD/DVD trouble shooter.  It didn't correct the problem and gave me the message "cannot locate CD/DVD burner".  I ran trouble shooter in the Control  Panel selected System Security's, Find and Fix. Then Selected  Configure a Device .  Results were 'Hardware may not be detected try to do what you wanted to do again' I tried 2-3 times.  WMP would not burn.  Tried Apple for help and didn't want to reinstall itunes.  I reinstalled Quick Time.   Followed Microsoft's 5-step resolutions:
              1.  Used the troubleshooter in Control Panel.                                         
              2.  Ran CD/DVD Fixit trouble shooter.
              3.  Manually fix corrupted registry.
              4.  Update or reinstall driver.
              5.  Create a sub registry key. 
    I tried to burn after every step and got the same result.it burned to 99% and kicked out. I used system restore back to May 15, 2014  thaat was before installing iTunes.  No burn.   Checked  driver and response was that 'Driver is working.  No problem was found'.    Today, ran Troubleshooter in ControI Panel and this was the messsage, 'Configuration Settings May Be Incorrect'.  How do I correct  this?  Help!  What next? 

    Hi,
    You were given some very good advice on your other post.  I ran into a very similar issue when I had installed iTunes and the end result was that I had to do a factory recovery back to a day one condition. Then I had to do a slow software installation process, checking every time I had installed a third party application.  I got tripped up a couple of times but determined that I had to install iTunes before installing other CD/DVD media programs (Roxio,WMP and Cyberlink).
    Do a fresh OS installation without the extra third party software and then install Imgburn.  Then use Imgburn to determine the capabilities of your optical drive and match the media specifications those detected by Imgburn to the media type that you are using. Do not use cheap media as the firmware in your optical drive may not support it. I prefer to use Verbatim media. Now see if Imgburn will burn your optical media before attempting to install iTunes and other CD/DVD optical media programs.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • DVD drive not burning double layer discs

    I was burning a double layer DVD this morning, using Verbatim media, which I've never had any problems with. The drive I was using was a Pioneer DVR-A18M. All of a sudden, after I successfully burned one disc and inserted another DL disc, it refused to burn anymore. I forget the exact error message, but it was something along the lines of the media wasn't recognized, and this persisted for multiple discs that I tried.
    Now, yesterday, a friend let me borrow a movie that had a crack in it and the disc came apart in my internal Pioneer drive - but it still worked after that. Odd thing was that the drive would still read and play movies, music, etc but it wouldn't burn anything, tho I don't know if it would burn things other than DL media because I didn't try.
    Anyways, while the Pioneer drive - which I just bought after New Years - had been working well, I decided to replace it due to the fact that it wouldn't burn DL discs and a few other minor issues I'd been having with it. The one main issue was that if I left a disc in the drive for too long, I wouldn't be able to eject it or load any new applications. I'd have to reboot the computer to get the disc out, something I never had to do with the only Sony drive that came with my G5.
    So, I replaced it with an LG GH22. Upon trying it out, it burned a single layer DVD-R, but will not burn a DL disc. The error message this new drive gives me is, from with Toast:
    Sense Key = Illegal Request
    Sense Code = 0x24
    Invalid Field in CDB
    If it would help, I could put the Pioneer drive back in and see exactly what that error message was.
    Oh, one last thing. I'd like to replace the E-IDE cable I have, as disc media is never able to reach its full burning speed potential. I'm guessing it's due to the old IDE cable, as my G5 is from 2005?
    Thanks!

    Ok, I tried using Dragon Burn instead of Toast and it worked fine and the DL disc plays. I have to run out to MCAT class but when I get home, I'll mess around with it some more and try using Toast again, the old drive, etc.

Maybe you are looking for