DVD not playing on player

I am new to DVD Studio Pro, I created a project and clicked build and format. I then put the DVD-R into my player to make sure it would work and no luck. I tried to emulate and still nothing. I can simulate and it works perfectly fine. Any tips or suggestions.

Mr.Ocean:
Wellcome to the forums. (I allways wanted to say that !!)
There are so many reasons that can cause that, that we need more detailed information to find most probable origin of the problem:
- Are you tring to buil a HD DVD?It will play only in your computer, not in a stand alone player&TV set.
- Are you receiving any error message during building?
I tried to emulate and still nothing.
What do you mean with emulate?
Try opening the VIDEO_TS folder created in your hard drive with DVD Player to check it runs.
Sorry for not beeing too much specific, but probably after you post some more info someone in this side can help you.

Similar Messages

Some DVDs not playing in my iMac, need help!

some orginial / genuine DVDs not playing in my iMac, need help!

Once your husband copied the movies, did he use a burn software to burn them to a DVD? You need to use a burn software to properly encode the footage so it'll play in any DVD player/computer/TV. So, once the movie is copied to your hard drive, you can edit it in iMovie (may need a converter first to get it into a format iMovie can work with such as MPEG Streamclip); after you're done in iMovie, use iDVD if you have it or Roxio Toast to burn it to a DVD.
And for the OP: Regions are different depending on where the movie was made: the US, Europe, etc. The regions are set within DVD player - you insert a DVD and the player reads what region it originated in. Please note you can only change regions 5 x; after the 5th, that setting will remain and can't be changed again.

Video portion of Nightwish DVD not playing correctly on Quicktime. It is not a smooth playback. Can I correct this?

Video portion of Nightwish DVD not playing correctly on Quicktime. It is not a smooth playback. A little jerky. Is there an easy slution to the problem?

I worded my question incorrectly. It isn't a DVD I'm having the problem with, it' s a Nightwish concert download form iTunes I am having the video portion of the video that plays not smoothy. Like it is moothing it short little segments, not a steady flow!

DVD not playing in newer DVD player

Here's what I'm using:
PowerBook G4 with a combo drive
OS X 10.3.9
External Lacie 16x DVD Firewire 2.0 d2 drive
Toast Lite (came with DVD burner)
iMovie 5 and iDVD 5
Using Sony brand DVD-R disks
I created 2 movies in iMovie and imported them into iDVD. I used one of the motion menus available in iDVD5. When I was finished with my project, I saved a disk image to my desktop. I mounted the image to my desktop.
Toast Lite has 4 options - Data, Audio, Video or Copy.
I selected Data (I will explain why Data in a moment) and burned the mounted disk image. The DVD WILL play on my Mac, on a PC, on my TV DVD player (RCA brand) but it will NOT play on my bosses "very high tech, Sony Dream Machine" DVD player that is only 2 years old.
Now, I know everyone is going to tell me I should have selected Video in Toast Lite, but it doesn't work. If I select Video I receive error messages saying it can't read the files. According to Lacie's message boards - once you have made a "Disk Image" and mounted it, all the video encoding has already taken place, therefore Data should be selected in Toast Lite.
I've read in many places on these boards that the type of media used could be the problem. But I would think that a Sony Disk would work in a Sony machine.
Anyone have any ideas?
I'm ready to beat my head against a wall.

Disk Utility works fine with my external LaCie drive. I have encoded several projects in iDVD as disc images and then burned them to DVDs. However, I use Toast primarily and have used Toast 5, 6 and 7 over the past 2 years. In Toast, select the copy option. Select the tab that gives you the expaned options and select disc image. Then simply drag your disc image into the Toast window. I have experienced no problems playing any of the DVDs in my home machines.

Why does my Encore DVD not play in Windows Media Player v.11

My DVD's play properly in players and from various other DVD Software but not Windows Media Player v.11. Most people I give my DVD's to view them on business computers, that only have WMP on them. Is there a way to build an Encore DVD that will allow them to play in WMP?

My DVD's play properly in players and from various other DVD Software but not Windows Media Player v.11. Most people I give my DVD's to view them on business computers, that only have WMP on them. Is there a way to build an Encore DVD that will allow them to play in WMP
You can always build a Flash "DVD". Other than that you may be looking in the wrong place. Microsoft has neatly avoided any MPEG-2/DVD licensing and merely uses the respective libraries of otehr DVD software on your system, so when no such thing is installed, it never works.
Mylenium

Please help, DVD not playing in Mac that burnt t

I recently bought an iMac Core duo 17in. I finished my first project in iDVD and everything looked fine when I previewed in iDVD (I used slideshows exported from iPhoto as movies). Then I burnt it to a Fujifilm DVD+R. The process went smoothly and when finished the Mac ejected the finished DVD. Now the weird thing is that when I loaded the DVD to watch it in the same Mac, the computer was unable to read it and just ejected it w/o opening any application. Furthermore, my ONKYO DVD player did not recognize the disc at all. Any suggestions? Can it be related to the Region Codes and NTSC/PAL setting? But the Mac should be able to always read the DVD...It burnt it! Very frustrating...
Sorry for long message. Thanks for any help...
iMac Core Duo 17in Mac OS X (10.4.6)

You should not be using +R format DVDs. They will not play in most standard DVD players, although computers seem to be more forgiveable...
The recommended brand on this forum is Verbatim -R ( and not rewriteable either!)
I use TDK -R and they work fine.
Terri

DVD not playing, I get the error message No title

I cut my HDV project on FCP 6, then used compressor to compress 1 pass , 90 minutes. Once compressed I used Studio Pro 4 to make a simple no menu DVD. When I put the DVD in my player it will not play and I get the error message on the TV screen " no title "
Very frustrated
D Kane

I have successfully authored DVD's in the past, just now it is not working.
Did you created a HD DVD by a chance? HD DVDs will play only in your Mac and not at all in standard DVD players.
Hope that helps !
Alberto

DVDs not playing: disc drive problem or something else?

I see that many problems occurr in regards to HP laptops and playing discs. I have recently encountered this problem myself.
My discs will appear when I put them in the drive and ask to be played;
I open it with Windows Media Player
It glitches for a little while, usually shows a picture or two from the movie I'm trying to play
Sometimes brings me to the menu of the disc....
But continues to glitch and refuses to play the way it usually used to.
(I've also tried to play them in HP Medias\Smart, etc. but still no go)
In terms of CDs.. I used the disc drive to put music from CDs onto my itunes. The computer wouldn't actually play the music but the music did transfer successfully onto my ipod...
What I'm getting from this is that the drive is still reading the discs, in some small way, but it can't register them enough to play them properly on the computer.
I've tried many suggestions I've found through other forums of people with similar problems but nothing has worked so far. It's been a few monhts now and I'm pretty bummed that I still can't watch my DVDs when I'm laying in bed.
Thanks for any suggestions!

I do not see a mention of the model of computer or the version of Windows, so a general response would be to download VLC player: http://www.videolan.org/vlc/download-windows.html
If that will not play it (either music or video), then there is probably a hardware failure.
Return with model of computer and Windows OS version.
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.

Dual Layer DVDs not playing in DVD players...

We have burned dual layer DVDs straight from DVD Studio Pro 4 and also from Toast 7.0 - they all play on our Macs but do not play in any of the DVD players that we have here on sight. Am I missing something or is it typical that the dual layer burned disc is not supported on a standard player? Thanks.

Currently I have Memorex DVD+R DL
I hate to say this, but there are a number of reports about inconsistency with Memorex DVD5 and DVD9 blank media.
Is there a chance that you could move to a different brand?
Toast, I believe, burns in a way that tricks players into seeing a DVD5 disc. Try to burn from it, rather than from DVD SP.
Also, try some better brands, ie Verbatim or even Sony.
best wishes

Bluray disc showing up but not playing in Player

I have a simple project: A still menu with one button to start playing one video of 55sec and return to the menu.
I have created a dvd version of this and it works fine. Then I created the same in 1920HD format for Bluray: in Encore's preview it looks just fine and it burns without any errors to VERBATIM media. But once it's in the Samsung player ( 2500?) it shows the menu but will not react to pressing the button nor the playbutton or anything else...
What I did check so far:
Firmware of player is current.
Verbatim media should be fine.
I made multiple tries with other transcoding: h264 or mpg2 both ways: prerendered in Aftereffects and transcoded in Encore itself from a animation codec HD...
no luck!
But here is the weird part:
I also made another project where there is no menu, but just an autolooping timeline and that one plays fine on the same player/media configuration and same sourcematerial.
Is there something I have missed?
Just saw some 2008 post of compatible Bluray formats, which did not include 1920/1080 at 24frames ( which is what my project is)
Do I need to make it 23.97?
Any help would be appreciated! (client is waiting!)
My setup: Bluray burner: LG HL-DT-ST BD-RE WH10LS30 firmware 1.0 ( just installed 2 weeks ago )
MAC PRO dual quad 2.8 (2008) Leopard SNOW 10.6.4
CS 5

We always test our images by first building an image in Encore instead of a disc.
We then mount that image to a drive using Daemon Tools Lite (free pc utility).
Once the image has been mounted, its as if you just inserted it as a disc, and your software DVD/Blu-ray player will play it back. We use Power DVD 8 Ultra, as the newer versions of Power DVD Ultra (10) do not play mounted Blu-ray images.
If the image passes our quality control, we then use ImgBurn (free pc utility) to burn the image to disc. Multiple instances of ImgBurn can be opened at the same time, allowing us to burn to 3 or 4 burners at the same time, from the same image, or different images.

Embedded Audio not playing - Flash Player 10.0.45.2

Hi
With the recent update of the Flash player I noticed that random *.swf files containing just embedded *.wav files will not play.
The only things that seem to fix this problem are;
Change the audio publish settings and republish
Or createa new *.fla and republish
Can anyone explain why this is happening? Is this bug temporary?
Thanks,
Joseph

Hi, the Flash forum was down in my area. Here is a link that you may just bookmark as it most likely have everything FP, just something to keep handy:
http://www.adobe.com/devnet/flashplayer/articles/flash_player_admin_guide.html
This is the FP Installer for Internet Explorer that you download to and run from your Desktop:
http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe (Not the debugger version)
This is the FP Installer for Firefox(or other browsers that FP supports) Download to the Desktop & run from there.
http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player.exe
When that Uninstaller was used for the 10.1, if I'm not mistaken it Uninstalls FP from all browsers.
I'm sure you are familiar with the ActiveX Settings and using the Administrator account to have the permissions to Install the ActiveX Control and write to the Windows Registry. Adblock in FF will need to be disabled if you use it and any pop up blocker software installed. You may want to refer to the Uninstall instructions for further info:
http://kb2.adobe.com/cps/141/tn_14157.html
You may also want to review the Troubleshooting guide to head off any issues before rather than after:
http://kb2.adobe.com/cps/191/tn_19166.html
Usually I cover the "prep" info but since we didn't discuss that, thot I'd post it, so if you need it you have it.
If you have any questions, just post. If you want the debugger version, I'll need to find the link.
Thanks,
eidnolb

Cyberlink power dvd not playing movies

My cyberlink power dvd will not play movie disk. My computer is HP2000 2b16nr notebook pc. thank you!

Hi scarlettclayton,
Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I saw your post regarding your Cyberlink Power DVD will not play a movie. I will be happy to help you with that but I will need more information then what you provided. Is this a DVD or a Blu-Ray? Are you getting an error message at all? What operating system are you using?
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Netflix dvd not playing on iMac OS X Yosemite 10.10.2

Netflix dvd's are no longer playing on my iMac. I never had this problem before, it started about 2 months ago. I don't have any other dvd's to test out. I have OS X Yosemite 10.10.2. Any suggestions?

Hi mputnam80,
Welcome to the Apple Support Communities!
I understand that your iMac is not playing DVDs that you receive from Netflix and you have no other DVDs to test out. In this situation, I would recommend working through the troubleshooting steps located in the attached article to help isolate and resolve the situation.
Get help with the slot-loading SuperDrive on your Mac computer - Apple Support
Specific troubleshooting
Below are several possible symptoms you may see. Follow the steps for the appropriate symptom to figure out whether the issue stems from the drive or the media. Be sure to inspect discs before use to ensure they are not cracked, scratched, or otherwise damaged. Inspection should include the inner ring of the disc which should be smooth and burr free. A disc with physical defects may become stuck in or cause damage to the drive.
Doesn't accept discs
Be sure to check your disc to make sure it is flat. You can check this by putting the disc upside-down on a flat surface. If the disc is bowed up on any side or in the center, do not use the disc because it might get stuck in the drive. Do not use discs that have anything attached to them or dangling from them (such as "sweeper" or cleaning discs).
If the drive struggles when you put in a disc or stops part-way, carefully look at the disc for labels that may be interfering. If there aren't any raised labels then try putting the disc in a few more times.
Try another disc to see if the issue is being caused by a specific disc.
Make sure you insert the disc far enough for the drive mechanism to activate. You need to insert discs nearly all the way before the drive will activate and pull them in. If you don't completely insert a disc, the drive will reverse and push the disc back out.
Allow the drive one or two seconds to accept the disc while it is fully inserted.
Reset the System Management Controller (SMC).
If the drive repeatedly does not accept discs, contact Apple or an Apple Authorized Service Provider, or make an appointment with an Apple Retail Store.
Accepts discs but they don't mount or are automatically ejected
Make sure the drive is not placed upside down. The aluminum enclosure should be facing up as shown in section 1.
Check the disc's surface for scratches and dirt, since these things can prevent the disc from appearing on the desktop.
Connect the MacBook Air SuperDrive directly to the computer's USB port instead a USB hub.
Reset the System Management Controller (SMC).
Ensure your drive can read the specific type of disc being used. The System Profiler or System Information may provide additional information regarding what media your computer supports.
OS X Snow Leopard v10.6 or earlier: Open Apple System Profiler by choosing "About this Mac" from the Apple () menu. Then, click More Info.
OS X Lion v10.7 and later: Click the Apple () menu and then hold down the Option key. Choose System Information from the menu.
If the disc continues to not be recognized, contact Apple or an Apple Authorized Service Provider, or make an appointment with an Apple Retail Store.
Best regards,
Joe

DVDs wont play in player

I'm using my usual work flow:
export out of FCP through Compressor into DVD preset audio & video files, bring those into DVDSP and build a DVD. It's done me good for a long time.
The only difference tonight is that I brought QT movies into DVDSP and initiated the encode through DVDSP instead of Compressor. Didn't get the desired results so I returned everything (or so I think) to factory presets and started over using my usual workflow via Compressor.
Now my burned DVDs wont play in my consumer DVD player ( final test before delivery) but they do play in my mac DVD player. What the F*?

Hi
By a chance, didn't you authored a HD DVD after resetting everything to factory presets?
Hope that helps !
Alberto

Why can i not play BBC player

i have a new imac and cannot play i player
probably a simple solution..can anyone help?
thank you

I see. Then you need to install flash player . Here is a link to download it directly from the Adobe website: http://www.adobe.com/support/flashplayer/downloads.html

DVD not playing on player

Similar Messages

Maybe you are looking for