DVD not playing with widows media player

File called UDF. Cannot play on Windows Media Player.

This is the System Centre Mobile Device Management forum. You can find help using Windows Media Player help here -> Windows Media Support
Cheers
Wayne Phillips

Similar Messages

  • Why does my Encore DVD not play in Windows Media Player v.11

    My DVD's play properly in players and from various other DVD Software but not Windows Media Player v.11.  Most people I give my DVD's to view them on business computers, that only have WMP on them.  Is there a way to build an Encore DVD that will allow them to play in WMP?

    My DVD's play properly in players and from various other DVD Software but not Windows Media Player v.11.  Most people I give my DVD's to view them on business computers, that only have WMP on them.  Is there a way to build an Encore DVD that will allow them to play in WMP
    You can always build a Flash "DVD". Other than that you may be looking in the wrong place. Microsoft has neatly avoided any MPEG-2/DVD licensing and merely uses the respective libraries of otehr DVD software on your system, so when no such thing is installed, it never works.
    Mylenium

  • Captivate 6.0.1 published MP4 play with windows media player

    Hi
    Pls help.
    I publish my Software Simulation to MP4 without any error.  Then I play this MP4 with Windows Media Player. I could only hear the audio but the video is all black.  The review works well.  Does anyone have any idea?
    Thank you!
    Rgds, YYY

    Try viewing your MP4 in a different player to see if it works there.  For example, the Adobe Media Player is a free application that you can insatll and use.  It's more likely to be compatible with Adobe-created video than Windows Media Player.
    Your Windows Media Player may need updated codecs to decode and display the Captivate MP4 video.

  • H.264 not playing in Windows Media Player

    OK, so I've exported a 720p video to H.264 format. The resultant .mp4 plays just fine on my Mac where it was created, in both QuickTime and the VLC Player. It also plays on another person's Mac (I'm assuming QuickTime) just fine.
    But two people who have Windows machines cannot get the file to play in Windows Media Player. I don't think they've tried another player, but that's irrelevant because I need my output video to be able to play in WMP.
    Is H.264 a poor choice in this case? That's always been my go-to format. I thought .mp4 was a universally playable format.
    Thank you.

    Jim Simon wrote:
    It depends on which version of Windows Media Player they're using. If they're still on XP, it's very possible it won't work.  Anyone using Windows 7 or 8 should have no problem.  (And perhaps it does need to be said, but everyone should be using either 7 or 8 by now.)
    At least one of them was on Windows 7.
    Is there a better format I should be using for PP export other than H.264?

  • DVD does not play on VLC media player or Windows Media Player

    Hi I've bought a set of 5 DVDs and played 1, 2 and 3 with VLC no problems. When it came to DVD 4 or 5 it decides not to play? When I open Windows Explorer the disc has the title etc but VLC seems to try reading it and nothing happens. No error message nothing.
    I went back to try the other 3 disc and all are fine and plays as per normal. Are DVD 4 and 5 just faulty? I haven't got any DVD player with me to try so I won't know. Or is there a solution or error somewhere? 
    My laptop is bought in the UK but DVDs are Australia bought if that makes any difference?
    Many thanks.

    Not all DVDs will play in XP Mode, mainly due to DRM restrictions.  The DRM thinks you've made a copy of the DVD and prevents it from playing.
    Are you able to play this on your Windows 7 host, or do you see the same behavior there?

  • DVD playback issue with Windows Media Player

    Hi,
    This isn't an Encore specific question, rather, a DVD playback one. Has anyone had issue playing their replicated DVDs in Windows Media Player? I truly believe it's the media player, not the DVD.  When we put a DVD in the drive and try to open it in WMP, it jumps right to a video, or jumps directly to the last place we were in a video.... it's not defaulting to the main menu.
    Has anyone experienced this? Is it a programming glitch on my DVD? I feel like it's a WMP issue, as it's only happening on certain computers.
    thanks.

    WMP has never been a good player for DVD's. At some point in the past, much of that functionality was disabled my MS, in hopes to reduce piracy. For some versions, no burned DVD would even play, though replicated/pressed DVD's were supposed to play fine.
    I use CyberLink's PowerDVD and it is fine, even with my burned DVD's. The free MediaPlayer Classic HC plays my discs well too, with full menuing.
    Good luck,
    Hunt

  • Need DVD to play on windows media player also?

    I made a dvd of some footage and output as a quicktime movie. I then used the best DVD setting in compressor. Lastly I used toast to burn the dvd. The dvd will play on everything except the windows media player. How can I get the dvd to play in the windows media player also. I looked at the flipformac site and was wondering if that program will do it. What are you guys using?
    Thanks

    Hi David
    My statement 'Windows Media Player is not a DVD video player' is not mine, it is a Microsoft definition. Windows Media Player is specifically for playing Windows Media Video files - WMV. It can also play mpeg(1) AVI and other sound files like CD audio.
    For some kind of licencing/payments thing, WMP is not packaged with an mpeg2 codec and some other bits that make the DVD interactive. Microsft's advice is to use the software player that is packaged with the DVD drive.
    What can be tried is the Microsoft utility which might let the video play but might not navigate correctly. Not all codecs are compatable with WMP.
    My own suggestion for reliability is, to playback DVD Video always use the installed dedicated DVD player and never WMP.
    What can be a problem is that the user has not installed the DVD software player which is often on a separate resources disc.
    http://www.microsoft.com/downloads/details.aspx?FamilyId=DE1491AC-0AB6-4990-943D -627E6ADE9FCB&displaylang=en

  • HT1391 Music that is on my computer and iPhone will not play using any media player

    Media (songs) that are listed in iTunes and on the iPhone will not play.  The cursor skips over them.  Using Explorer I can see them on the disc, but clicking them and trying to play them with Quicktime, Windows Media Player or iTunes does not work.
    Does anybody know what I can do to fix this?

    Check the information on the song, Right-Click -> Get Info.
    In the fist pane, (Summary), you will see the AppleId (Account Name) that was used to buy the song.
    Be sure to login to use this account to register this computer to play the song
    What I often see, Is that people have many different AppleID, sometime not even knowing it, which is a big problem.

  • Creating H.264 FLV file as per Spec, does not play with Adobe Flash Player 10

    1] We have developed an application to encapsulate H.264 video inside FLV container, following the "Adobe Video File Format Specifications 9". According to the specification the H.264 video data is embedded in FLV tags, as follows
    FLV Headers: Meta Tag: Sequence of Video Tag.
    But in spite of following the specifications, Adobe Flash Player (version 10) could not play this FLV file. However, some players were able to play this FLV file. The fact that Adobe did not play it was very surprising.
    2] We searched and finally found one FLV file, which contained H.264 video (unlike others which usually contained Sorenson's H.263). This file was played fine by Adobe Flash Player. So it led us to investigate further and we found that
         [A] the video tag was preceded with 2 byte length of the every "contained" H.264 NALU. This applied to all the NALUs / I-slices/P-slices and so on.        This is not documented.
         [B] Only the first video tag (containing video sequence params), is preceded by the sequence "01 4D 00 15 FD E1" followed by 2 byte length and then      the video data (sequence parameters in this case). What are these additional bytes ? where are they documented ?
    Could you pls share your views about the above and point us to the documents, if any, which are in agreement with the above observations.We think there is a discrepency in the document related with authoring FLV file with H.264 content.
    Thanks,
    Abhijeet Wakle
    Sigro Systems

    You could push it out to one or two users and test.  Moving up to the latest version of Flash Player is USUALLY a good idea, however, if you happen to be on Captivate 4, be aware that there was an issue reported some time ago that once you upgraded your development machine to Flash Player 11 it interfered with publishing out courses.  I cannot remember seeing a bugfix issued to Cp4 users for this (someone correct me if I'm wrong).  If you're on Cp5 or 5.5 this shouldn't be an issue.

  • ITunes+ Songs not playing in Windows Media Player 11

    So I got a new PC. On the previous PC i had been using windows Media player and playing songs purchased in iTunes+ in WMP.
    So I transferred all my songs to an external HD. Then on my new PC I pointed the folder in WMP to the external HD and it imported all my music, except for my iTunes+ songs.
    I have also purchased 2 new iTunes+ songs and they will not import into WMP or play in WMP.
    What do I need to do?

    Is it possible the problem is that on the previous pc I was running Windows 7 and on the new PC I'm running Vista Premium?

  • BlackBerry not syncing with Windows Media Player

    Somehow, my BB doesn't seem to sync with WMP properly, although either my BB or WMP are working normally. The same with the music library. Updated music files or playlists aren't 'recognized' by BB Link, but only the files which were already in my library before.
    Cannot sync anything between BB and WMP.
    Thanks in advance, I appreciate your kind help!
    Mr. Knox

    Did you try clearing the sync relationships and establishing them again?
    - Ira

  • .MOV exported to .AVI with QTpro fails to play in Windows Media Player

    I have a .MOV file that I converted with 7.1.6 of QTpro to a .AVI ( DV/DVCPRO - NTSC / Best / 4:3 ) ( uncompressed 48kHz / 16bit / 2 channel ). The converted .AVI file will not play in Windows Media Player or load in Premiere. The converted .AVI will play in QT. I have previously converted .DV files to .AVI without any problems. If I load the converted .AVI with VirtualDub it says there is a missing "index" and precedes to read the entire .AVI file to "re-create" the "index".
    Can anybody offer any clues as to what is going wrong?

    Are you referring to a Lynda.com Compressor tutorial or one of their many PPT tutorials.
    I agree that 10 Mbs is a nice general quality level – depending on your footage, of course – the content, the lighting, etc. WMV is probably the safest – although MP4 should be good as well,
    Hard to be more specific except to say, Test. A preset that works well for one movie may look not-so-great applied to another.
    Take a short, representative section and encode. Project the output file and see what you think.
    Good luck.
    Russ

  • Exported media cannot be played by Windows  MEdia Player

    Hi,
    I have loaded in a CS3 project into Adobe MEdia Encoder (I would have eimported it into Adobe CS4 first but it doesn't work- it just loads the project and when it's done, nothing appears). I selected the "Sequence 1" of the project and started the Queue. When it was done, the resulting file does not play on Windows Media Player. I tried loading it into VLC but I get an error about missing a decoder "v210".
    I'd appreciate any help with this.
    Thanks!

    hi derek,
    In CS3, you can find this option by clicking "File>Export>Adobe Media Encoder". In the AME UI that comes up, you need to click on format drop down for the MPEG2DVD format. There, you can use the preset named "NTSC High Quality". since your footage is only 24 minutes long, you can increase the "bitrate" under "video" pane. Make sure that the output size does not exceed the DVD limit.
    To burn it on DVD, you can use Encore. Import the just exported file into Encore DVD project and burn it to a DVD.
    If you face any problem, Do get back to this thread.
    thanks,
    Prateek

  • E3000 Media Server not seen by Windows Media Player (v 12.0) on Win 7

    I've enabled the Media Server on my E3000 router.  My PS3 can see the server and play media from it by my PCs can't!
    I'm using Windows Media Player v 12.0 on Windows 7 and some older version on Windows XP and it's my understanding that the Media Server should appear under the "Other Libraries" section but it does not.
    Am I doing something wrong? Is there a bug in the E3000 firmware (I have the latest as of this date) or is the Media Server simply not compatible with Windows Media Player?
    If it's an incompatibility issue, can someone please point me to a compatible media player for Windows 7?
    I did read a post about a firmware upgrade on the 4200 that broke the media player, but I don't know if such a problem exists for the E3000.
    Thank you,
    Martin.

    This is what you can try in getting the Computer to see the media server on the E3000:
    (Obviously make sure you have the media server enabled on the router and at least one folder shared....and make sure you have scanned the folder(s))
    1) Turn your computer on.
    2) Disconnect your external usb drive.
    3) Pull the power on the E3000.
    4) Connect the external usb drive.
    5) Plug the power back into the E3000.
    Then see if that works or not.
    If the issue still persist then here is the link which may help you: http://h10010.www1.hp.com/ewfrf/wc/document?docname=c01832417&tmp_track_link=ot_recdoc/c00859236/en_...

  • Video from Iphone will not open in windows media player

    I was able to import videos from my iphone 5c into windows vista, but the will not play in windows media player.
    How can I play the video?

    Rodney-- you're unclear what exactly you did. If you encoded a dvd, your computer's dvd player SHOULD play it. Unless your pc doesn't HAVE a dvd player.
    If you burned a data dvd of your fcp project, unless you have quicktime on your pc, you won't be able to play it.
    Investigate flip4mac, which allows you to export wmv files.

Maybe you are looking for