DVD Not recoginized

Hello, I am running Windows 8.1 with Adobe Premiere Pro 2.0. Premiere Pro does not recognize DVD Burner. All other recording software does. A@ny help would be greatly appreciated. L.S.

Some general ideas
Right click the program icon and select WinXP compatibility mode from the option list
Doing Run as Administrator http://forums.adobe.com/thread/969395 [says Encore and also for "All" versions of Premiere] will sometimes fix "odd" errors
And, adding to what Stan said
Things and Software to AVOID when authoring/burning a disc... says Encore, but also applies to Premiere Elements and disc burning
Start --> http://forums.adobe.com/thread/608660
#2 has WHY Explained http://forums.adobe.com/thread/607390
Plus http://forums.adobe.com/thread/562941
http://helpx.adobe.com/creative-suite/kb/cd-dvd-drive-recognized-application.html

Similar Messages

CD/DVD Drive only reads DVDS Not CD But the computer reads it as a DVD RW Drive!

CD/DVD Drive only reads DVDS Not CD But the computer reads it as a DVD RW Drive.the drive door say RW DVD+R DL,Compact Disk Rewritable,Ultraspeed,DVD Multi Recorder.I was Wondering if Windows Loaded the wrong Driver?My Laptop S/N IsCNF62612TZ And P/N Is EZ601UA#ABA And The Front Of My Monitor says Hp Pavilion Dv 1000 Entertainment Notebook PC,And The Service Tag Is dv1738od and the Sticker On The Back Of The monitor say Hp Pavilion dv5- 1235dx Entertainment notebook PC.it Cme Factory With Win xp and when i got it the os was corrupted.i tried to reinstall xp but disk said no hard found.so i booted it up with vista ultimate and then downloaded the drivers and stuff from the here.should i had downloaded the 64 bit set as well?

della wrote:
My toshiba tecra a2 can only read DVDs. I cant read any type of cd. Ive tried so many things. My laptop is running on xp service pack 3 with a mat**bleep**a DVD RAm UJ 820s. I can burn/run any type of DVD but cant do anything with cds. Ive tried unistalling the drive and that didnt work. Ive uninstalled the IDE drivers and that didnt work. Nothing seams to work. I cant use recovery cds because there CDS. Please Help!!!!!!!!!
It's probable that the CD 'side' of the combo drive has failed. That you cannot boot from the recovery CD is pretty much proof of the failure.

Import DVD (not copywritted)PLEASE HELP ASAP

I do a lot of volunteering for the Children's Miracle network. I recently received a 6 minute DVD that is not copy writed in anyway. Its on a DVD-R. I want to import that DVD and transfer it over to another iDVD project and add it to a small DVD I'm making.
Once again, there is no write protection, I have all the permission needed to do this, so its not violating any terms of use.
My question is obvious, how would I do this? I need to mass burn 40 of these DVD's ASAP to give away at a fundraiser.
Thanks for your help!

you don't need a Ripper ( verboten ) , but a converter..
and just copying the TS folders uses the wrong disk format (=dvd not playable on standalone DVDplayers...)
DVDs are in a socalled delivery format (mpeg2), which isn't meant and made for any processing as editing...
for using the iLife apps, you have to convert'em first, in recommended order, choose one of the following tools/workarounds:
DVDxDV (free trial, 25$, Pro: 90$)
Apple mpeg2 plugin (19$) + Streamclip (free)
VisualHub (23.32$)
Drop2DV (free)
Cinematize >60$
Mpeg2Works >25$ + Apple plug-in
Toast 6/7/8 allows converting to dv/insert dvd, hit apple-k
connect a miniDV Camcorder with analogue input to a DVD-player and transfer disk to tape/use as converter
http://danslagle.com/mac/iMovie/tips_tricks/6010.shtml
http://danslagle.com/mac/iMovie/tips_tricks/6018.shtml
http://karsten.schluter.googlepages.com/convertdvdstodvs
none of these methods or tools override copy protection/DRM mechanisms.. advice on 'ripping' is a violation of the ToU of this board ..
+be nice to copy rights ...+

My DVD is not playing any kind of DVD I get a message DVD not supported ?

My DVD player will not play. It is working and loads discs fine but message says DVD not supported ? Any help would be appreciated. I do have parrlels instaled on my machine. It happend once before and I had to mount DVD player on to the Mac but I do not know how . Thanks

Please mention what kind of DVD it is? A movie? Where did you get it from? Parallels has nothing to do with DVD Player.

Video portion of Nightwish DVD not playing correctly on Quicktime. It is not a smooth playback. Can I correct this?

Video portion of Nightwish DVD not playing correctly on Quicktime. It is not a smooth playback. A little jerky. Is there an easy slution to the problem?

I worded my question incorrectly. It isn't a DVD I'm having the problem with, it' s a Nightwish concert download form iTunes I am having the video portion of the video that plays not smoothy. Like it is moothing it short little segments, not a steady flow!

DVD not supported

Hi
I've got a new Imac 24 " and I've tried a few DVDs with no success - the DVD player will start up and the message "DVD not supported"comes up. Can't find anything of use in the help topics to deal with it.
Cheers
Dave

Welcome to AppleDiscussions...
Now, first of all, did you do the iMac Software Update 1.0?
http://www.apple.com/support/downloads/imacsoftwareupdate10.html
Disk Utility > Repair Permissions
and have you tried to reset the SMC (System Management Controller)
a chip on the logic board that controls all power functions for your computer
http://docs.info.apple.com/article.html?artnum=303446
1. From the Apple menu, choose Shut Down (or if the computer is not responding, hold the power button until it turns off).
2. Unplug all cables from the computer, including the power cord and any display cables.
3. Wait at least 15 seconds.
4. Plug the power cord back in, making sure the power button is not being pressed at the time. Then reconnect your keyboard and mouse to the computer.
5. Press the power button on the back to start up your computer.
Thanks,
den
.

Burned DVD not as expected

I created a short slideshow with iPhoto '05, added music and set the slideshow to fit the music. Exported to iDVD, added a photo and music to one of the 04 themes. The slideshow previews in both iPhoto and iDVD look fine, it's when I burn it onto a DVD that it doesn't look right. The photos in the slideshow are brighter and more saturated than the ones in iPhoto, there are what look like splotches on the parts where the vivid colors are. I tried burning another DVD with the Best Quality setting switched to the other setting and viewed it with two different DVD players, my PB G4 and MBP. It does seem a little better than the first burn but it's still nowhere near as good as the iPhoto and iDVD previews.
This didn't happen in the previous burn projects using the same settings.
What happened to my slideshow?
Any help is appreciated.
Happy Holidays to whomever reads this.

Hmmm. The preferences are confusing -- if your show is less than an hour, use Best Performance to yield the best looking result (least compression).
TVs can have difficulty showing the brightest reds, deep blacks, etc. Those colors tend to bleed into the surrounding area, and should be avoided for font colors. And it's possible that your computer display will generally look better than the TV when playing the DVD (note: an iPhoto slideshow will almost always look better on your computer -- no DVD compression and a high quality monitor).
Lower quality media can introduce problems -- check this by Saving as Disc Image from iDVD, and play the resulting virtual DVD using Apple's DVD PLayer.
John

Some DVDs not playing in my iMac, need help!

some orginial / genuine DVDs not playing in my iMac, need help!

Once your husband copied the movies, did he use a burn software to burn them to a DVD? You need to use a burn software to properly encode the footage so it'll play in any DVD player/computer/TV. So, once the movie is copied to your hard drive, you can edit it in iMovie (may need a converter first to get it into a format iMovie can work with such as MPEG Streamclip); after you're done in iMovie, use iDVD if you have it or Roxio Toast to burn it to a DVD.
And for the OP: Regions are different depending on where the movie was made: the US, Europe, etc. The regions are set within DVD player - you insert a DVD and the player reads what region it originated in. Please note you can only change regions 5 x; after the 5th, that setting will remain and can't be changed again.

Start up DVD not recognised by mountain lion

My start up DVD not recognised by mountain lion-how do I get around this for restoring from time machine?

It's not very clear: Are you trying to reinstall Mountain Lion from a DVD copy you made of it, for some reason? And if so, why would that help you restore from Time Machine? Please give more information. Properly, to either reinstall Mountain Lion, or to Restore it from Time Machine, you need to reboot while holding down the Command - R keys as mcsound above recommended, to boot into the Mountain Lion Recovery Partition to do either.

Burn to dvd not working

I am new to Final Cut Pro. I created a project, then burned it to a dvd with no problem. I later edited the project, then tried to burn that to a dvd and it will not burn.
I have no idea what I am doing wrong. With the project selected, I insert the DVD and wait for Finder to recognize it. I then go to Share>Burn DVD. I used the default settings both times as far as I know. There has to be a setting or something that I am missing. I am using a new DVD with nothing on it, not the same one as the first time.

mzcarla62 wrote:
Like I mentioned earlier, I am waiting for the DVD to be recognized in Finder. It did allow me to export it, then burn it to a dvd in finder. I think it is in .mov format though. Is that ok? I need this to be able to be played in Macs and in PCs.
Sounds like you made a data DVD, not a video DVD that will play in a DVD player or in a computer optical drive. (And I had read your initial post to mean that your disk was recognized in the Finder.)
If you do want a video DVD, then use Share>Burn DVD. If you want a data DVD, export a movie…using say, the Mac & PC setting in Apple Devices and then burn it in the Finder.
But I'm getting ahead of myself…which kind of DVD do you want?
Russ

Hi, a dvd got stuck in my mac mini and after looking at solutions online and attempting some not only has the dvd not ejected but my mac wont turn on properly, there is simply a white blank screen, can anyone help me please? thanks

Hi, a dvd got stuck in my mac mini and after looking at solutions online and attempting some not only has the dvd not ejected but my mac wont turn on properly, there is simply a white blank screen, can anyone help me please? thanks

Hi Claire, sounds dire, but some things to try...
Have you done a PRAM reset, CMD+Option+p+r...
http://support.apple.com/kb/HT1379
In fact, do 3 in a row, takes a bit of time.
Intel-based Macs: Resetting the System Management Controller (SMC)...
http://support.apple.com/kb/HT3964

G71 notebook: DVD/CD drive recognizes only DVD movie DVD - not sound,not data CDs

G71 notebook: DVD/CD drive recognizes only DVD movie DVD - not sound,not data CDs

Hi,
First, try the automated fixit from Microsoft on the link below.
Windows 7
Vista
Check if the drive will now read CDs etc.
If it still doesn't, click the Start Menu, open All Programs, open Accessories, right click the Command Prompt and select 'Run as Administrator'. In to the prompt type the following command and hit enter.
sfc /scannow ( note that there is a space between sfc and the / )
Let the process complete, then type exit and hit enter.
Next, click the Start Menu, open the Control Panel and click on Device Manager. Next click to open DVD/CD-ROM Drives. Right click the drive and select uninstall. Do not delete drivers if asked. When the device has uninstalled click on the 'Scan for Hardware Changes' icon ( usually just below Help on the toolbar ). Let windows reinstall the drive and see if it will now read other discs/data etc.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

DVD not coming up automatically on TV?

DVD not coming up automatically on TV?
Just burned off a DVD and when I put it in my set-top DVD player it does not automatically open the 'menu' page on my TV.
With commercially bought DVDs as soon as I put them in the player, the TV channel changes and the default menu appears.
With my DVDSP project DVDs this does not happen, I have to hit the 'menu' button on my Sony DVD player remote control before I actually get the menu; otherwise it sits at whatever TV station it is at.
I've looked though all over DVDSP and can't find any setting in any of the menus/drop-downs etc in the software interface that suggest an option.
Does this make sense? if so, how can I implement the feature that makes the DVD menu come up automatically on my TV?

Okay, tried that, created a new track, put in a 5 second motion logo with the end jump set to main menu. But when I insert DVD into player, it doesn't automatically show. You have to physically push the 'menu' button on the remote control.
I can't understand it, why every other commercially bought DVD automatically switches the TV channel to the DVD channel and displays the main menu, but no matter what I do, it dosn't.
My DVD player simply says "loading' when I first put the disc in, then after about 8 seconds it just sits there with the usual time display on the DVD player??
I've had friends send me burned DVD discs (done on other programmes, not DVDSP) and theirs do the same as mine, they don't load up and open on main menu, I have to push the button on the remote, so I know I'm not the only one with this issue.
I want to nail it though as this is for a commercial DVD that is going to be replicated from Glass master.
Any other ideas guys?
Will upgrading to FCP Studio 2 work; perhaps mine is bugged?
Mac Pro 2.66GHz, Duel-Core Intel Zeon 3 GB RAM & 3 extra 500GB internal HDs. Mac OS X (10.4.7) Final Cut Studio 5.1.2

Why will a Leopard backup DVD not work on G5.

A couple of Leopard issues:
1, When I a make a dvd backup of my Leopard dvd using either Disk Utility or Toast it will work fine on the intel but will be spit out of the G5. The G5 cannot make double layer so I must rely on a computer that does! My G4 can make double layer but it is 400 miles away now! When is a copy not a copy?
2, Leopard disk utility repair permissions takes a long long time. It gives the errors discussed on other posts but why such a long time?? By the way, the Diskwarrior site gives some cautions about repairing permissions but does not address the inordinate amount of time, with respect
to Tiger, issue.
Other than the above and some applications no longer launching or working properly I appear to have two stable systems working. As I have done for years I install a new OS on an external drive, find out what works and what don't and in a few weeks upgrade the main drive. I usually use Supperdupper but found out it does not work on Leopard, a least for me! So I have not yet figured out how to make an archive copy of a Leopard system. Hard drives are like people, they eventually die. I have not tried a restore using Time Machine so I do not have any faith in it yet!

Roger Carlson2 wrote:
A couple of Leopard issues:
1, When I a make a dvd backup of my Leopard dvd using either Disk Utility or Toast it will work fine on the intel but will be spit out of the G5. The G5 cannot make double layer so I must rely on a computer that does! My G4 can make double layer but it is 400 miles away now! When is a copy not a copy?
The fact that your G5 cannot make a dl DVD means nothing. I am sure it can read it, and that's all that counts. If you can play a movie on the G5, it can read a dual-layer DVD. You have some other issue there.
I would also point out that not all DVD DL blanks are equal and some machines can only read the + and some only the - types. A homemade dual-layer DVD is not the same as a commercial one.
2, Leopard disk utility repair permissions takes a long long time. It gives the errors discussed on other posts but why such a long time?? By the way, the Diskwarrior site gives some cautions about repairing permissions but does not address the inordinate amount of time, with respect
to Tiger, issue.
This is a known "issue" which has been discussed here many times. We do not know why it takes a long time. Only Apple knows.
Other than the above and some applications no longer launching or working properly I appear to have two stable systems working. As I have done for years I install a new OS on an external drive, find out what works and what don't and in a few weeks upgrade the main drive. I usually use Supperdupper but found out it does not work on Leopard, a least for me! So I have not yet figured out how to make an archive copy of a Leopard system. Hard drives are like people, they eventually die. I have not tried a restore using Time Machine so I do not have any faith in it yet!
Have you looked into CarbonCopy which claims to be Leopard compatible?
Message was edited by: nerowolfe

[Athlon64] CD / DVD not working properly, Neao K8T800 Pro series.

Hi all,
I purchased a MSI K8t Neo2 motherboard along with a AMD 64 3200+ (socket 939) in the beginning of May.
When i installed the parts in my case I experienced some problems getting windows (which I reinstalled) to detect all the Harddrives i had.
I solved this by putting 3 HDD's on one IDE interface, and 1 on a separate controllercard. on the other IDE interface i put my Sony DRU-700A DVD alone.
This worked, to a certain extent.. When I place a disc in the DVD, windows gets a hizziefit and starts to lag insanely, when it's finally done, it won't autostart the discs i put in, i can't double-click it from My Computer as i get the error:
"F:\
Only part of a ReadProcessMemory or WriteprocessMemory request was completed."
Doesn't tell me much.. I then try ro right-click F: and select "exlore", AHA! this works. I get into the disc and i can move around in the foldertrees, but it takes time.. My GOD it takes time...
When i finally reach my destination and try to execute a .exe file, this happens:
"F:\ is not a valid win32 application".
At this point one starts to think: "ok.. i know that.. but the exe-file i tried to start IS..."
NOTE: From time to time i've noticed that it switched between these 2 error messages, i.e i get the "not valid" when trying to start the disc and the "ReadError" when starting a .exe-file, and vice versa.
I have the latest bios, i have tried adding a LG CD-R/W tp the process and tested if that worked, see results here: www.vikholm.se/say_what.gif
I might not be the sharpest tool in the shed, but i know that CAN'T be right?
I then went into the Device Manager and selected "uninstall" on my Sony DVD, thinking it has to find new hardware on reboot and reinstall it. Windows finds nothing, and i can't seem to get it back again..
Anyways, i noticed that 2 updates to my mobo was avaliable through MSI Live Update, so i choose the newer one and install it, thinking it might solve this problem.
Select reboot -> Click "exit now" on firefox.exe -> run for work as i', late -> come home now just to see that windows did NOT reboot as i got an error code from some exe-file.
Anyways, reboot properly this time and half-way through the boot up it reboots again, and at the loadingscreen where you can see the biosversion and such it says:
"Sec Master drive is not ATAPI compatible
F1 to Resume"
This is my LG CD-R/W. I press F1 and it boots just fine, and i see that my LG is no longer avaliable in My computer.
These are my problems.
To sum things up:
1. Could it be my mobo that is screwed up in the IDE interfaces?
2. Could it be my IDE cables? (i don't have any others to try with =( )
3. I've been in contact with Sony's support, accordign to their firmware testers and producttest programs, my device worked as it should.
4. Anyone have any tips on how to get my Sonydevice back to windows without reinstalling windows? It not, i'll just have to reinstall.
5. If all else failes, can anyone lend me a handgun so i can end my misery?
Thanks a million for reading and if you have the slightest idea of what might fix ANY of the problems stated above, do not hesitate to post. Please.
Milk and cookies for anyone who helps me solve this

Quote from: Tiresmoke on 09-July-05, 01:49:28
The promise controller is simply there to add to their Sata Raid ability. It is not for opticals.
Then let's do some RTFM:
Quote
Pages 1-2 and 1-3
Promise 20579 On-Board (Optional)
>Supports two SATA and one IDE
- RAID 0, RAID 1 and RAID 0+1 supported
- RAID function work with ATA133+SATA H/D or two SATA H/DConnect up to two SATA devices (such as SATA HDD, CD-ROM, DVD-ROM and
two ATA133 devices
> SATA 150MB/s with extensions (SATA II Phase I)
> RAID Smart function
> SATA ATAPI device compatible
That clearly states the ability to get opticals connected. It is admitted, that there only SATA opticals are mentioned.
Quote
Page 2-18
Parallel ATA/Serial ATA RAID Connectors controlled by Promise
20579: IDE3/SER1/SER2 (Optional)
The brand new Promise 20579 chipset supports one IDE connector IDE3 and two
serial connectors SER1& SER2.
IDE3 is a 32-bit Enhanced PCI IDE and Ultra DMA 66/100/133 controller that provides
PIO mode and DMA mode 0~5, Bus Master, and Ultra DMA 66/100/133 function. You
can connect up to 2 hard disk drives---one IDE master and one IDE slave.
Other devices than HDDs are not mentioned in the IDE3 section.
Conclusion: According to the documentation, opticals can be connected to the promise controller, at least if they are connected to the SATA-interface.
Own experiments show:
If an optical drive is connected to IDE3, the promise controller detects it correctly. If a bootable media is inserted, it is detected as bootable by the controller BIOS.
An old LD 8240 CD-Writer (only MWDMA2/PIO4 capable) works partly, if attached to IDE3, but there are errors. Playing Audio CDs and DAE generates drop-outs. CD burning results in corrupted data on the media.
If I connect a LG 4163B DVD-Writer, there are no issues concerning CD-playback or DAE. CD-recording was not tried out. The DVD-RAM feature fails, possibly due to driver interference.
This shows, that there at least a CD-ROM or DVD-ROM drive (PATA) might work on the promise controller, but that also depends on the drive itself.
Michael

DVD Not recoginized

Similar Messages

Maybe you are looking for