DVD on PC Sound Output to H

Here's the scenario. I have a pretty good PC here, SB Audigy 2, CL 7. surround sound. Use the system mostly to watch DVD's in full surround soud (which is simply amazing!). The system has an ATI Radeon 9550 which is hooked up to the nice HDTV that I have here too. I can see the DVD on the HDTV, while being played in the PC, which gives me nice crisp display on the bigger TV and amazing surround sound all going thru the PC.
I want to know can I take a cable from the Digital Out on the back of this SB Audigy 2 and run that to the RCA jacks on the back of the TV for Audio In? In case I did not want to use the surround sound while watching a DVD?

Poras,
Please forgive if I ask an obvious question but are the RCA jacks on the back of your TV for digital input?
Poras wrote:
Here's the scenario. I have a pretty good PC here, SB Audigy 2, CL 7. surround sound. Use the system mostly to watch DVD's in full surround soud (which is simply amazing!). The system has an ATI Radeon 9550 which is hooked up to the nice HDTV that I have here too. I can see the DVD on the HDTV, while being played in the PC, which gives me nice crisp display on the bigger TV and amazing surround sound all going thru the PC.
I want to know can I take a cable from the Digital Out on the back of this SB Audigy 2 and run that to the RCA jacks on the back of the TV for Audio In? In case I did not want to use the surround sound while watching a DVD?

Similar Messages

System sound output switchery

Hi everybody,
I'm having a very strange problem that I haven't figured out how to reproduce just yet but thought I'd give it a try on the forums anyway...
The problem is that the system sound output in the audio prefernce pane seems to be randomly* switching from "Digital Out" to the next one in line, my bluetooth headset. So, if my headset is turned off I get all kinds of "error connecting to bluetooth device" messages and if it's on, the battery drains quickly from connecting and disconnecting all the time. I should mention that Digital out is working beautifully; it's just that I'm getting these bluetooth errors all the time as something is switching the audio out from "Digital Out" to my headset.
*I'm sure there's a cause, but I haven't been able to put my finger on it just yet.
Sorry I can't be more specific at this time...
Cheers,
Ryan

OK, I've found that the problem only occurs when watching a movie in dolby digital (VLC or DVD Player) and a sound is played in iTunes or an event happens such as receiving an IM. This is beginning to make sense to me as the receiver after all is receiving a dolby digital signal, and wouldn't be able to play a stereo stream while it has its hands full with the dolby digital. (I guess? Correct me if I'm wrong... anyway the receiver LED can only display stereo or digital, not both at once!)
So my question becomes, how to stop OS X from directing these sounds to my bluetooth headset. There must be a way just to turn off all other sounds while I'm watching a movie in 5.1 or send them to /dev/null or something, anything other than repeatedly connecting/disconnecting with my headset or displaying annoying warning messages.

Can´t get optical sound output from my brand new mini

have connected the MM to an optical input on my Yamaha RX-V659, but I can´t get no sound.
Mac-side: After connecting and turning on, "System Prefs -> Sound -> Output" has changed to Digital Output and says that no output controls are available for this output. I have tried playing from iTunes and DVD Player. In DVD player the option for selecting Digital Output had appeared, and I chose that. When I take a look at the end of the cable I plug into the receiver I see a constant red light.
Yamaha-side: I have tried 2 different optical inputs, and gone over my settings several times. The receiver does not seem to detect digital audio coming in. I tried the Signal Info menu on my receiver, and for another source it output:
PCM, 48kHz, 2.0, Analog
On the optical input it says:
---, ---, 2.0, Analog

I have a similar setup to a Kenwood receiver. You are correct that ALL system sounds (frontrow, system alerts, etc.) will play through to your stereo.
Have you tried switching Toslink cables and/or the toslink to miniplug adapter that is plugged into the mini?
I had a bad cable at one point in time, and a bad adapter at another point in the life of this system. You perhaps tried these things already but I only saw mention of trying 2 different inputs (I assume on the receiver) and made no mention of cables/adapters.
Let me know how you make out.
Message was edited by: CaptTB

Delayed digital sound output?

Presumably someone else has seen this already, but I could not find any such info in the FAQ or here.
I recently connected the SPDIF output to the stereo.
The sound output there, while good, is slightly offset from the analog output. When running with both analog and digital output active, the digital works as an "echo".
More annoying, when playing video, this means lips and voice are not in sync.
My guess is the offset is something like 0.1 - 0.2 secs.
Anyone seen(/heard) of this before?
WinXP, BIOS 2.4, APU 1.0 / audiodriver: 5.10.2826.0000

Hook,
All this is using the SPDIF output:
I just checked and the delay is greater (and is probably what you are noticing) when you enable the Dolby Digital encoding. If you output Stereo, that is PCM, it will be much smaller. The DD encoding/decoding process takes time.
Sill, you will notice some delay anyway WRT the analog, as your receiver has to process the PCM signal a little, but not as much as the DD signal.
If your problem is lip-sync, set your DVD player to output directly to SPDIF and not to 6 channel audio. Just think about it:
DD track ->SoftDecode to 6 channel->MCP encode to DD->SPDIF->Receiver decode to 6 channel
VS
DD Track->SPDIF->Receiver decode to 6 channel.
Hope this helps.
M.-

USB (Mega stick), sound output and PS2 problems

==USB problem==
The MSI MEGA STICK do not work with the MSI K7N2 Delta ILSR.
When you plug it, its recognized, you can write on the MEGA STICK, delete files but cannot READ from MEGA STICK. It freezes while display "reading". I have tried on lots of PCs. Only my MSI motherboard do not work properly. The same problem with my 2 MEGA STICK. And i had tried Windows XP and Linux. Same problem. Others USB devices works fine. Even card readers...
==PS2==
My optical wireless mouse do not works properly. When i turns on the computer, it works ok. If i restart, do not work. Restart again, works. And go on... Only this mouse. Others MB works fine.
==Sound Output==
And also with my sound output. The eletrical one (coaxial).
It do not work with my 5.1 home system. It works fine with my old SB Live. It gets worse when i use my tv output from my Radeon 9100. It only works SOMETIMES when the tv output is not plugged in.
Thanks to all that could help me.

Mega stick.
have you updated the firmware ?
No. It Freezes before being able to update. Also the update do not tell about solving this problem
"Firmware version: 2.05
Update items
1. Improve delete MP3 and voice files function.
2. Fix device will restart while forward/backward Voice file."
you do know that windows xp does not come with usb2 drivers.
sp1 does and you have to install them yourself.
go to device manager and delete all usb entries and reboot and windows will install the usb2 drivers next time you boot.
if you get a slipstreamed version of xp you dont need to do this as it installed usb2 drivers rightaway.
slipstream means a xp disc with sp1 on it.
My XP cd is already SP1. Also tried on BIOS to use only USB 1.1V
PS2.
tried to use the other ps2 contact ?
No. Could i use the keyboard PS2 to plug the mouse?
SOUND.
this is not my area but it could be a good idea to post what the equipment is.
have you tried the latest drivers from http://www.nvidia.com ?[/quote]
Its a brazilian brend. You wont know. CCE. Its works fine with DVDs, my old SB Live! and others. Only with my K7N2 do not work properly. Its an AC3 decoder. The problem gets worse when i use the Radeon 9100 tv out.
Look like the problem on this thread.
https://forum-en.msi.com/index.php?threadid=29572&sid=&hilightuser=26427
This is my old thread. Never solved. :-(
https://forum-en.msi.com/index.php?sid=&postid=319195#post319195
When i updated the BIOS, it got even worse. Not even with the tv output unplugged it never worked anymore...
Its very disapointed to buy an expensive MB and realized that it do not work properly...
Thanks yo your help.

Sound outputting problem

Hi All,
I am having continuous problem solving the following sound issue:
When burnt both video and audio files, having used Compressor and Toast Titanium 9, the video plays fine however my sound plays only in two channels.
The sound was designed and edited in Soundtrack pro application. The output setting selected in Compressor is: 5.1 Surround Quicktime, 96.000 kHz.
There is also this warning box coming up, when changing the sequence setting audio output to surround, saying:
' The current audio device does not support the number of outputs set in the sequence settings audio outputs tab.'
Any help/advice will highly be appreciated.
Stephen

Hi Stephen,
First, I'm assuming you are using the optical out of your mac to go to the BDV. With it plugged into your mac goto your system prefs and in the Sound>Output>Devices select Line Out Digital.
In FCP goto Audio Video Settings>A/V Devices>Playback Output>Audio and select 'Built-in Output'. Now click the options button next to the selector. Set number of Channels to 6 and sample rate to 96000.
Now goto your sequence settings (Cmd-0) and under the Audio Outputs Tab click the selector that says 'Load Audio Output Preset' and select 5.1 and click OK
Back on the timeline right/ctrl-click the lock symbol on each track from 3-6 and select the following:
3: 3 (Ctr)
4: 4 (Sub)
5: 5&6 (rear L)
6: 5&6 (rear R)
1 and 2 will already be setup for Front L&R
That's it for FCP 5.1 support
In Toast you must set the audio output to Dolby Digital. PCM only supports Stereo on Bluray and DVDs. Just customize the settings in Toast. Click the customize button, then under encoding select Custom and choose Dobly Digital under Audio.
That should be you good to go
All the best
Pi

DVD Player, no sound

For no reason that I can ascertain, my DVD Player plays video just fine, but there is no audio. I have tried playing many different DVDs, but with the same result. My iTunes works perfectly fine.
Any help would be greatly appreciated.

Player's volume slider to low or player even muted?
Sound output in Player Preferences set to System Sound Output?
Sound will/may also be muted when running iChat.
Appropriate Audio-Track selected?

Can not change sound output. Help Please

Well, i've been digging all the forums lately in web. my problem is, i can't change my 'system' sound output to my sound card which is Native Instruments Audio8 Dj.
Let me explain my problem decently. I do the usual procedure, system preferences > sound > n then select the output. but nothing happens. it is always set on internal speakers or headphone or whatever plugged in to the *Built-in Output*. I try switching from audio-midi setup n that doesn't work as well. The system perfectly recognizes the sound card, i can get output from sound card with applications which have their own output settings. But i cant change the system output. I have the latest version of soundflower loaded(this might be causing the problem who knows), i used many soundcards before(or maybe even ex-drivers?) n they used to work until i updated to snow leopard. I also tried trashing the files in macintosh hd > library > preferences > audio >>
and those files *did not regenerate* after restart(like 10 times), so i had to copy them from my imac.(hehe). i tried resetting pram or nvram.(didn't do any good too)And also i tried trashing soundpref.plist which didn't do me any good neither. Now i need that sound card to give me my system output. I don't need drivers of any other ex-sound cards or whatever. My drivers are up to date. And im pretty sure this ain't an hardware fail.
So, any ideas? Thx.

I am having the exact same problem. I have spoken with Apple Care and they are having my case reviewed by "Engineers," apparently. Its very frustrating as I cannot listen to iTunes or any of my video games through my really nice monitor speakers. FYI, I had this problem without installing Sound Flower, since then I have installed it in the hopes that having something different to select it might work but no changes. If I hear any good news from Apple I will be back to let you know. This seems to be a very rare problem as I have only found one other post about this issue.

The sound output does not work on my ipod

Hi There,
I have an Ipod 4 th generation and the sound output no longer works on any device. I've reset and reinstalled the software but nothing appears to work?
Any ideas please?
Serial number: 9C6463XJV9R
Thanks Chris

If none of the 5 R's helped address the issue, it's likely hardware related.
http://www.apple.com/support/ipod/five_rs/
As to what exactly is damaged/faulty, no there is no certain way to tell. It could be the iPod's audio chip or something else on the logic board.
Either way you'll need to have your iPod serviced/replaced either by Apple or a third party company.
B-rock

No sound output help

plz help someone ....
I have hp g6 2312ax
there is no sound in my laptop
I took it to the hp service centre and they said that audio port on mobo is damaged
motherboard need to be replaced.
I have two audio device
1. amd
2. idt
is there any way I can get sound output
This question was solved.
View Solution.

Hi legendary92,
Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I saw your post regarding the motherboard problems. If the HP service centre has told you that audio port is damaged you will have to replace the motherboard if you want sound. Page 75 of the Maintenance and Service Guide will show you how to replace it. The part number for your motherboard or system board as they are called in notebooks is 683031-501. You can order the part from HP PartsSurfer just search for the part number.
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Help with sound output via HDMI

My sound output via HDMI suddenly stopped worked to my TV set. I've reset the PRAM and the SMC. When I go to sound control panel for sound output, the setting is on Headphones. When I try to change it to SV420XVT1A (the tv) it immediately jumps back to headphone. I also tried a different HDMI cable to a different HDMI port on the tv. This just started after the Mac Mini had been turned off for a week. I'm using Lion and it's an 8GB Intel Core 2 Duo. Any suggestions?

I actually discovered this answer about 5 minutes after I posted the question. Thanks a lot for your help!! Funny thing is that it had worked all along with something plugged in the headphone jack but suddenly stopped working. Again, thanks!

No sound output to TV using Apple dock - video is fine

I'm baffled. I have a new 80GB iPod Classic, a brand new Apple dock, and Apple A/V Component cable. When I watch a video or photo slideshow, everything works great. However, when I want to listen to my iPod's music through my TV's speakers, using the same setup, there is NO sound output to the TV at all. Why would the audio play when watching photos or video, but no sound when all I want is music? Please help!

I haven't personally had this problem, but I believe in order to hear music through your TV speakers, you have to use the headphone port instead of the AV cable.

Is there a way to force A Mini to recognize the HDMI as a sound output.

Is there a way to force the Mac mini to recognize the HDMI as a sound output? I have the HDMI going through a matrix switch and the video works fine but the audio is not recognized. My Apple TV has no problem with both audio and video through the same set up to a tv.

Some general checking:
Open System Information found in Applications->Utilities.
On the left side under hardware, click Audio. In the right
pane, Expand items if necessary to reveal the contents and
see if there is an HDMI listing. If so, click on it to get additional
info.
Also, have you connected the Mini directly to the TV? Narrows down
if it is actually the Mini or just how the Mini is working with the
switch.
Another possibility is that there is a power up sequencing issue.
Ran into a situation with my Yamaha receiver, Mini, and Samsung TV
that if things were not powered in the right sequence I could only
get two channel audio and sometimes only internal audio. With my
setup, I needed to power up the TV (waiting for it to come up completely
showing the searching for signal box), power up the Yamaha, then finally
power up the Mini. Also, after all this, if anything was switched, I would
end up having to reboot the Mini to get audio the way it should be.

Sound output channel keeps switching by itself every few seconds

Hey guys, I have this sound output issue with my Macbook pro 2010 September version that every once in a while, the audio output would keep swapping between headphone, digital output and the speakers when NO headphone or digital output or what so ever is actually plugged in. During this time i am unable to adjust sounds, and my menu bar would become very slow to respond (the sound icon and Soundsource application would stop responding during this time). After a while (could be less than 10 minutes or last to about an hour, it varies), it returns back to normal by itself.
I've read many posts on Apple forum about this issue, but i haven't found a suitable solution. Also, I read that for most, when the audio output doesn't work it would usually be a output socket issue that there is a RED light in the socket. But for me, at times it has a RED light, at times, it doesn't, and sometimes the RED light would switch on and off by itself for a couple of times, depending on how long this issue lasts until it returns to its normal state by itself.
I have tried:
1. plugging the headphone into the socket and take it out quickly
2. Downloading Soundsource: i heard that Soundsource has an option of manually adjusting the sound output channel instead of letting the computer switch automatically, but unfortunately I downloaded the latest (2.5) version of the software and it doesn't have that option on my macbook pro.
3. I also tried Cmd + Opt + P + R
The result however is that none of this worked.
Does anyone have any suggestions?

I have both and haven't experienced this at all. Very strange. I do get a lot of random channel changes however when I put my iPad on the remote, the cat walks over it or the dog sits on it.
That being said, I don't use the Samsung remote at all for the TV and never have done. I dislike it and find it unresponsive. I use a different remote to change through the available outputs and the Vision remote for Vision and for switching the TV on and off.
Life | 1967 Plus Radio | 1000 Classical Hits | Kafka's World
Someone Solved Your Question?
Please let other members know by clicking on ’Mark as Accepted Solution’
Helpful Post?
If a post has been helpful, say thanks by clicking the ratings star.

Assigning an application to different sound outputs

Question: Is there a way to assign an application to use a sound output options in the mixer or another Win7 application?
I have installed Win7 RC 32bit. I have headphones and speaker outputs on my system. Both are detected and both can be assigned to a working default sound choice. I am unable to assign an applications sound output to a certain outputs or change them.
The only way I can make a sound application work through the speakers if the headset is assigned the default role is to go into sound management, then assign the speakers to default and then restart my application.
Desired: I would like an application profile to default to the assigned role from the mixer. The settings could be permanent or temporary. If the 1st choice is not available, use the alternate working or (default). The sound should dynamically change or at the very least keep that profile with that application until changed.
In the mixer, I should be able to rt click on the application in the mixer and manually assign it to a sound device. This option should be assigned to a default target to play ONLY if the desired is not available. Possible options can be, just one time, or have this device handle sound if available.
Hardware: Asus Rampage 2: Gene motherboard, 6GB Ram, GTX 275 graphics, Seagate 1.5TB. Drivers auto discovered on install and appear to be functional.

Hi TKCDAC,
As you may noticed, great improvements have been made in Windows 7. Applications can realize Stream Routing via the new Core Audio APIs. Windows 7 has the ability to distinguish between communication devices and all other audio devices. It is now possible to have both a Default Communications Device that is separate from the Default Audio Device. The Default Communication Devices will be used for PC based communication like web chat or VOIP, and the Default Audio Device will be used for everything else. Stream switching enabled dynamic stream switching based on the default device. If the default audio device is disabled or unplugged, Windows automatically tries to determine the next default audio device and will dynamically redirect the audio to that new device.
For instance, if you would like to play the audio via headphone when using communication applications such as Windows Live Messenger, we can simply right click the volume icon in the system tray, click Playback Devices, right click the headphone listed and then choose Set as default Communications Device.
For more information, please refer to the following articles:
http://msdn.microsoft.com/en-us/library/dd756612(VS.85).aspx
http://louisgale.blogspot.com/2009/08/live-messenger-and-default.html
Also, based on my test, certain application such as Windows Media Player has a sound output option. To change the settings, please open Windows Media Player, click Tools, Options, click Devices tab, double click Speakers in the Devices list, pull down the Select the audio device and then choose the device you would like to play the music from Windows Media Player, click OK. We may play another song in the play list to take effect.
In the meantime, I will forward your suggestions to our Product Group. Please be assured that any improvements in the product are based on users' requirements.
Thanks,
Linda

DVD on PC Sound Output to H

Similar Messages

Maybe you are looking for