DVD picture looks awful

Not sure exactly where to address this. I shot some footage on my Canon 7D, edited in FCP (no effects or filters applied) and then burned a DVD. The picture looks terrible.
the h264 footage was converted in FCP into ProRes422. Frame rate was 59.94. My FCP export looks fine, but when I burn it in DVD Studio and play it on my DVD player, there are blotches everywhere and does not look clear at all. Very noticeable during pause.

bubsy wrote:
Thank I'll give that a try when I get home tonight. Quick note, I played the same DVD on an SD television set and the picture looked fine, decent anyway. But on my HD TV it looked terrible.
Are you using the same playback deck? All players use different upscale algorithms and some are really awful. Then there is the setting on the TV which may have its own upscaling routine. Your DSLR footage was 720 or 1080 but your DVD is a very lossy and lousy MPEG2 that, at best, can only deliver 480 horizontal lines of severely compressed video. You are throwing away 75'% of your pixels.
Scaling that tiny number of MPEG2 pixels back up to fill a 1080 HD display means every pixel is blown up about 4 times. Every compression artifact is also four times as visible, four times as ugly.
bogiesan
Message was edited by: David Bogie Chq-1

Similar Messages

  • Help! DVD copies looking awful!!

    Hi,
    The DVDs I'm burning look awful. I am exporting a project from FCP to a QT movie. The QT looks fine on the computer when I play it back full screen but when I burn it to a DVD it looks horrible both on the computer and from a DVD player. This is a weird turn of events since I have downloaded and made files from the same project many times and did not have this problem. The resolution is so jagged and the titles look horrible.
    I am not using any compression when making the QT. I have used current settings - which are HDV 1280 x 720p and, when that looked bad, I tried using pro res 422 720p. I have changed the settings in idvd 6 to Best Performance and have also tried the Best Quality Setting.
    I've been searching this forum for hours for answers about my problem. I have tried every fix I can find to no avail. I'm desperate now since I need to get a dvd in the mail today in order to make a festival deadline.
    Please help!
    cathy c.

    #42 - Quick and dirty way to author a DVD
    Shane's Stock Answer #42 - David Roth Weiss' Secret Quick and Dirty Way to Author a DVD:
    The absolute simplest way to make a DVD using FCP and DVDSP is as follows:
    1. Export a QT movie, either a reference file or self contained using current settings.
    2. Open DVDSP, select the "graphical" tab and you will see two little monitors, one blue, one green.
    3. Select the left blue one and hit delete.
    4. Now, select the green one, right click on it amd select the top option "first play".
    5. Now drag your QT from the broswer and drop it on top of the green monitor.
    6. Now, for a DVD from an HD source, look to the right side and select the "general tab" in the track editor, and see the Display Mode, and select "16:9 pan-scan."
    7. Hit the little black and yellow burn icon at the top of the page and put a a DVD in when prompted. DVDSP will encode and burn your new DVD.
    THATS ALL!!!
    NOW...if you want a GOOD LOOKING DVD, instead of taking your REF movie into DVD SP, instead take it into Compressor and choose the BEST QUALITY ENCODE (2 pass VBR) that matches your show timing. Then take THAT result into DVD SP and follow the rest of the steps. Except you can choose "16:9 LETTERBOX" instead of PAN & SCAN if you want to see the entire image.
    Shane

  • DVD looks awful on Sony Bravia 26" LCD

    I've created many DVDs and always check them on a CRT TV. They always look great (given that they are shot on DV). However, I have purchased a Sony Bravia, and when I viewed the DVD it looked awful: smearing, blocky, traily, etc.
    Given that most of my clients have LCDs or plasmas I'm worried that they will see a similar picture.
    Does anyone have any tips for getting better results (apart from throwing away the Bravia)?
    Thanks
    I edit in FCP, uprezed the edit to 8 bit 4:2:2 uncompressed, encoded to mpeg2 with Bitvice, then used DVDSPro to create the DVD

    Those rates are the default bitVice settings and a good place to usually start. As the bit rate too high issue take a look at this link
    [Bit Rate Too High|http://dvdstepbystep.com/faqs_3.php]
    The way you describe the problem it sounds like something where Compression markers could help - basically it flags portions of the video which you want the encoder to really make sure it gets right. Press the "M" key over the timeline twice (first one sets the marker second brings up the dialog) where the issue is and set it to Compression Marker in the dialog.
    If these issues are right before/after a cut sometimes changing the cut by a couple of frames can help or change the length of a dissolve by a couple of frames (I just had one thing where I had the ghosting and the rest and that took care of the issues, the problem areas were on the cuts/dissolves.)
    Try sending the section with the problem from Final Cut directly to Compressor and also keep the timeline at DV to see if that helps (do not change codecs) in case there is something happening when you are switching codecs. That can also be a part of the issue.

  • Preview and .m2v look beautiful, resulting dvd looks awful

    I have a short film (2 minutes). It's fairly darkly shot (purposely so), shot in a car at night. There is a nice amount of defintion though, as the actor in the driver's seat is nicely lit, and the backseat falls to black, like I want.
    I used Compressor to encode the film, using the DVD: Best Quality 90 minutes setting. Viewing the preview in the simluate mode of dvdsp, and also watching the m2v in Quicktime, I see exactly what I want: the blacks are rich and deep. However, the resulting dvd looks awful. The blacks are muddy and EXTREMELY artifacty. It's completely ugly and unusable.
    What could be causing this? And what can I do to fix it? I'm using a very cheap brand of dvd-r I've never used before... could that be part of the problem?

    Thanks, Drew. Yes, first course of action will definitely be going out and getting some name brand dvds. This is the first time I've ever cheaped out on blank dvds, and hopefully that's the problem, 'cause that's easily fixed.
    I've not had a chance to view the resulting dvd on a proper NTSC studio monitor, but I've looked at it on a decent tv, and on two different computer monitors, and it looks similarly crappy on all three.
    I did not make any adjustments in Compressor, I just used the basic setting mentioned above. Could that make a difference? Could upping the bit rate make a difference? I was thinking that since the previews of the resulting encodes looked so nice, that the problem didn't lie there. But, as you might be able to tell, this is hardly my area of expertise.
    Unfortunately, I cannot afford bitvice at the moment, but I'll add it to a list of things to look at for future investments.
    Thanks for the link to the article! I will read it over and see if it helps.

  • HD video from iMovie looks awful when converted in iDVD

    Shot some 16:9 HD video and made a project in iMovie, then "shared" it to iDVD to create a standard-definition DVD.
    Unfortunately, the resulting DVD looks awful - far worse than a commercial standard-def DVD.  The image is very pixelated in a manner that seems worse than standard-def resolution limitations.  I processed it using the iDVD "professional" encoding.
    Why does this look so bad, and by "bad" I mean worse than other standard-def DVDs?  Is there a way to optimize the stepping down from HD between iMovie and iDVD?
    Thanks!

    Hi
    There are some observations to this
    • I do not use - Share to iDVD - in any version of iMovie
    • iM'08 or 09 or 11 - I Share to Media Browser - and in iDVD get the movie from here - result is better
    BUT - iM'08 or 09 or 11 - are not tools to use if You want a Good DVD
    • iMovie up to HD6 or FinalCut any version are ! They keep all lines that builds up the picture - the new ones
    discard every second line resulting in a 50% loss of sharpness
    Especially if recorded im SD-video format on miniDV tape (interlaced) then choise of video editing application is very important.
    Yours Bengt W

  • Input & output looks awful...

    Purchased the Photoshop Elements/Premiere Elements bundle last night, but I'm having an issue on the Premiere side.
    Video clips (AVI, MPG, MOV, even VOB) that normally look great when played inside Windows Media Player or QuickTime look awful when brought into Premiere Elements for editing, and look just as bad however the file is output, whether to the PC or to DVD. The video is of much lower visible quality and is quite blocky.
    Is there a setting that needs to be enabled that I'm missing?

    Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037?tstart=0
    What is a CODEC... a Primer http://forums.adobe.com/thread/546811?tstart=0
    What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037?tstart=0
    Read Harm on drive setup http://forums.adobe.com/thread/662972?tstart=0
    - click the embedded picture in Harm's message to enlarge to reading size
    - you need AT LEAST 2 drives for video editing, 3 is better
    - some HD formats work better with (require) RAID
    Read Hunt on Partitions http://forums.adobe.com/thread/650708?tstart=0
    A link with many ideas about computer setup http://forums.adobe.com/thread/436215?tstart=0
    Read Bill Hunt on editing a VOB/MPG file http://forums.adobe.com/thread/464549?tstart=0
    Tools to Convert to DV-AVI http://forums.adobe.com/thread/415317?tstart=0
    Convert http://premierepro.wikia.com/wiki/FAQ:How_do_I_convert_my_files%3F
    Convert your files to DV-AVI Type II with 48KHz 16-bit Audio
    I have NOT used the products below, I only forward due to other mentions
    $99 http://www.corel.com/servlet/Satellite/us/en/Product/1175714228541#tabview=tab0
    $99 http://www.womble.com/products/mvw.html
    $90 http://www.magix.com/us/movie-edit-pro/ plus $5 Ship
    $80 http://www.nchsoftware.com/prism/index.html
    $75 http://www.videoredo.com/en/index.htm
    $70 http://www.nchsoftware.com/prism/index.html Converter
    $40 http://www.daniusoft.com/dvd-ripper.html#135
    $40 http://www.deskshare.com/dmc.aspx Digital Media Converter
    $20 http://www.topsoftwareol.com/product/Video/Video_Converter_Standard.html
    $00 http://www.dvddecrypter.org.uk/ or http://www.mrbass.org/dvdrip/
    $00 http://www.squared5.com/ MPEG Streamclip Converter
    $00 http://www.erightsoft.com/SUPER.html Multi-Converter <-- supposed to be very good
    $00 http://www.virtualdub.org/ Mpeg to AVI Converter

  • My Dell U2412M monitor looks awful on OS X

    I bought my first Mac (Mini 2014) and attached to my Dell U2412M external monitor and the graphics looks awful, all blurry and pixelated.
    For the avoidance of any doubt:
    1) Mini is connected to minitor via miniDP to DP cable
    2) Color is correctly set to RGB
    3) Resolution is on the right setting
    4) Pictures look fine, the problem is just with the font rendering, in any application
    5) Have tried turning LCD font smoothing on and off but does not really make a big difference
    Any other setting I can try? Is Mac really this bad at handling fonts? I use the same monitor on a windows laptop and font is crystal clear. It is like looking at a 1024x768 screen while mine is a pretty decent 1920x1200.
    thanks

    Did you resolve issue?

  • Picture looks more fuzzy and compressed ONLY at start of movie

    Hi there
    I am using IDVD 6.02 on my MacBook Pro 17" Intel Duo. I am also running OSX 10.4.7.
    I have made an Imovie project that begins with some imported titles (white text on a black screen) and then leads into the movie. When I make this full movie onto DVD, these opening titles are perfectly clear, but as the actual image part of the movie begins, the picture looks fuzzier/ more compressed than normal, but after about 10-15 seconds it seems to clear/ correct itself so the picture looks as it should. I have tried actually deleting that bit of footage and remaking the movie, but it still makes whatever the first part of the movie is, fuzzier. This fuzziness is not so bad, but there is a definite difference after the picture clears itself. The odd thing is that its only just started doing this. I have gone back through DVD's I made only a week or so ago and they are fine.
    Does anyone know what this could be? Any help would be extremely appreciated.

    Hi there
    I am using IDVD 6.02 on my MacBook Pro 17" Intel Duo.
    I am also running OSX 10.4.7.
    I have made an Imovie project that begins with some
    imported titles (white text on a black screen) and
    then leads into the movie. When I make this full
    movie onto DVD, these opening titles are perfectly
    clear, but as the actual image part of the movie
    begins, the picture looks fuzzier/ more compressed
    than normal, but after about 10-15 seconds it seems
    to clear/ correct itself so the picture looks as it
    should. I have tried actually deleting that bit of
    footage and remaking the movie, but it still makes
    whatever the first part of the movie is, fuzzier.
    This fuzziness is not so bad, but there is a definite
    difference after the picture clears itself. The odd
    thing is that its only just started doing this. I
    have gone back through DVD's I made only a week or so
    ago and they are fine.
    Does anyone know what this could be? Any help would
    be extremely appreciated.
    I am also having problems with burning a DVD. 18mins into the movie it "Shakes and id fuzzy" but clears up after 4 minutes and the rest is fine. Tried a couple of makes of disc but no change.
    If you hear anything about this would appreciate some feedback, Thanks

  • Burned DVD video looks like jerky-  This did not happen before!

    Hi all,
    I have used I DVD before with great results! I have done several DVD's and each of them have looked great and smooth. I am using an HD camera and sharing to Itunes in the high resolution setting. The movie when played on my apple tv looks smooth and great. When the same video is burned to the DVD it looks like some of the frames are missing. While it looks clear it looks jerky like something you would see on the internet or an old home movie. Any help would be appreciated as I have tried to change the setting but cant seem to find what is wrong. I am not sure if some upgrade has hurt performance, is anyone experiencing this same issue. The slide show looks great and plays smooth with music. I created the slide show in Imovie08 and copied it into the DVD that way because when I tried to use the slide show option in IDVD the music kept skipping and cutting out.
    Thanks for your help!
    GE

    I will try to answer both request in one post. First the video did not really look like the tracking was off generally this makes lines in the video. I was more like an old time movie only not that bad where it may have been missing some frames but the picture looked good just choppy.
    What I did first was share to the media browser a "large movie" from Imovie08 then import into IDVD- that did not work choppy- about 1.05gb for 38 min of video
    Next I shared to Itunes from Imovie08 same as above result the same-(guess it would be since the same movie format just in a different place. Since it worked before guessed I would give it a try. I tried this option several times on several settings. While the movie played fine in Itunes it did not when burned and played on the DVD.
    Someone had a post about quicktime upgrade being a problem so I thought. . .and then
    Next I exported a large .MOV file it came to 8.07GB for the same 38 min of video above. This I put into the movie file then pulled it into IDVD and burned the video and IT WORKED!!! no choppy video!
    Now should I have to do this every time NO. This should be fixed as it must be with the way IDVD is reading these files.
    PLEASE let me know if you have any thoughts on the fix. I did remove peridan too and that did not work. I would like not to have to create such large files to make this work.
    Thanks
    GE

  • Pictures look grainy in PE 11

    Complete newbie here, so please bear with me.
    I've compiled a short 'movie' of pictures and video clips with Premier Elements 11, but the pictures look grainy!  They are fine when I open them with any other program, but they look just aweful in my slide show.  Can anyone tell me what I'm doing wrong or why this is happening?  I was really hoping to have this done as a gift for Christmas, so time is running out on me.

    Thanks, but that doesn't appear to be the problem.
    I hit the render button.  Still no difference.
    I burned it to disk and put it in my dvd player and sadly, it looks even worse!
    If I can't solve this in the next couple hours, I guess I'll have to either play it on the TV with great sound/aweful pictures, or run it on the computer with slightly better pics but crappy sound.     Makes a lousy Christmas gift for all the hours of work I've put into it!

  • Help - once transferred to DVD, video looks "squeezed"

    I'm new to this so thanks for bearing with me.
    I copied a movie from my camcorder to iMovie, and Shared it to iDVD. When I burned the movie from iDVD onto a DVD-R (I have a PB G4 with Superdrive), then watched the DVD, the picture looks compressed or "squeezed" together. Is there something I need to do differently, a change in formatting somewhere, perhaps related to the 16:9? Thanks for any help! Hope I supplied enough info.

    Thank you - I can answer some of your questions but not all (yet). But in the meantime, I was also wondering whether this "squeezed" image problem might only be apparent on my laptop's DVD player - and not if I play the DVD on my TV? (I am traveling and can't test that yet).
    To answer some of your questions:
    What Camera 4x3 or 16x9 (HD) ?
    -- Canon Elura 100 (mini DV)16:9
    Versions of: Mac OS, QuickTime, iMovie and iDVD ?
    -- OS X 10.4.8, QT 7.1.3, iMovie HD 5.0.2, iDVD 5.0.1
    Where do You store Your movie, internal hard disk or ext one? If ext one, USB or FW and how is it formatted ?
    -- Internal Hard disk so far
    a. Did Your movie look OK in iMovie ?
    -- Yes
    b. If You instead of Share/Export to iDVD, drop Your movie icon into a selected iDVD theme window (just inside the edge of this to avoid the movie to become a button)
    -- No, I "Shared" the iMovie to iDVD
    (I am now working on trying the other suggestion you made)
    -SG

  • Progressive dvcprohd footage to dvd export  - looks like youtube !

    this is gonna need a compressor / dvd studio pro guru to
    I have been searching the internet / forums etc etc for hours - have tried heaps of suggested settings but just cant get a good result - I am on a brand new mac pro quad core - the latest Final cut studio with all latest software updates.
    my fcp timelines look beautiful - cinema desktop preview looks great.
    sending to compressor from my dvcprohd ntsc progressive fc timeline - using settings under the dvd tab - mpg 2 and ac3.
    but after running through compressor:
    i am getting hideous stair stepping. Any small line on the screen that crosses the horizontal at an angle (ie not flat) looks awful.
    The video looks like youtube. washed out - no macro blocking - but stair stepping / herringbone is off the scale-after reviewing the dvd and raw mpg 2 files both on the monitor and on a tv.
    As far as i can tell -There shouldnt be any interlacing issues because interlacing shouldnt happen - i shoot and work progressive all the way through my work flow - and all my sequences are set up as progressive at the correct frame rates.
    is this a downscaling issue?
    the format is set up correctly with frame rate and progressive settings matching my source
    after trying the standard best quality settings and getting youtube results:
    i tried: cbr 7 mbs , (its only 42 mins of video) - from my limited research on the forums it appears that cbr at a high bit rate works better for top quality dvds than vbr 2 pass - which seems counter intuitive. please correct me if i am wrong. 2 pass vbr at similar bit rates gives me no noticeable improvement in quality.
    frame controls on -resize filter better
    output fields same as source
    deinterlace fast (i really dont know why this option is there as i am working prog all the way through
    but i suspect compressor may be trying to deinterlace my prog footage?)
    adaptive details on and off have bene tried
    100% duration relative to source.
    I have been trying for 3 days to get a good result and am literally pulling my hair out. I have 8 test dvds - nothing looks right.
    i suspect a bug in compressor - i have read a few posts about similar items - have tried a few suggested settings - and they havent worked. Am considering looking at another product (bit vice / sorenson) if i cant get this resolved - but maybe i am missing something simple.
    i am even reading about people getting better results through IDVD... which would indicate a compressor bug- perhaps..

    Try exporting from FCP timeline to selfcontained QuickTime file first, and processing this file with Compressor. Report if there is any difference, please. I am asking because I just found similar bug considering HDV 1080i50 format.

  • All fonts look awful

    New Mac Mini. Mac OS X Leopardo di Snowio latest update.
    Using 1080p, on a 1080p monitor.
    *All fonts look awful*
    System font (top bar, finder, everywhere) Safari as well. Everything.
    Fonts look pixelated.
    Didn't do any font change myself (removed nothing).
    Is it due to the install of Final cut xpress / Aperture ?
    Could it be the install of a Brother Laser printer?
    Thanks for your help.
    NB All graphics at the bottom / everywhere look perfect. Only fonts is the problem.

    I think your font smoothing may be messed up a bit. That happened to some people when when upgraded from Leopard to Snow Leopard. From the picture you posted, it appears the fonts are a bit more jagged than they should be. Here are the instructions I copied from another Mac Web site a long time ago. They aren't mine but I have used them successfully.
    If you’ve got an LCD panel that you think looks worse than it did before upgrading to 10.6, you can try this fix to see if it makes things better. How? Just open Terminal (in Applications -> Utilities) and paste this command, then press Return:
    defaults -currentHost write -globalDomain AppleFontSmoothing -int 2
    The 2 at the end is equivalent to the old “Medium - Best for flat panel” setting in 10.5. You can also use 1 for light smoothing, and 3 for strong smoothing. This change will only affect newly-opened applications—anything already running will have to be restarted to see the affect of the changes. As such, you may want to experiment with a document in Text Edit, trying the three alternatives, and then after you find the one you like best, rebooting your Mac (so that it will take effect system wide).
    Note that if you go back into the Appearance panel and toggle the font smoothing setting, you will override your manually-set value—so don’t do that if you value your newly-smoothed fonts.

  • When publishing to a folder page looks awful once uploaded. Can anyone help

    Hi,
    I've read through at least 30 pages on this forum and seem to be unable to find something to help me remedy my problem.
    I made a really simple site in iWEB. When I publish to a folder and click the "visit this site now" button, everything looks perfect. However, once I upload the site, using Fetch, the site looks awful. The Arial font is replaced by something else. The "made on a mac" image disappears. The navbar is non existent, and none of my other pages display properly (when I manually enter there addresses).
    I read a previous post about changing my Fetch settings so that data uploads in binary (raw) form and did that. I tried changing text-encoding in my browser to UTF-8, but that did not help either.
    I've cleared the folder on my home computer a number of times and tried republishing and re-uploading and that does not help. I've tried viewing the page in Safari, Mozilla, and Explorer, and it looks terrible in all 3. The site is:
    http://web.syr.edu/~ljames
    If someone can help me I'd greatly appreciate it. If you need any further info from me, please let me know and I'll do what I can to assist. Thanks.

    You have changed the permissions (or they are incorrect) on your home_files directory. I get a forbidden message when trying to access that directory. The sylesheet (css) and other files there dictate how the home page is diplayed. Make sure that all the permissions on the directories for your site are set correctly.
    Todd

  • Pictures look like they transfer via iTunes app window - but don't appear on iOS device

    My pictures look like they transferred to iPad (the new) or iPhone (4) in iTunes (on the App page). I can see the files in the little app file share/transfer window, but the pictures do not show up in the iPhoto App on either iOS device.
    Tried deleting the ios iphoto folder mentioned in a different post - did not help.
    Deleted all pictures from the app window, and then synched, then tried putting in half as many (mostly because I didn't want to wait for a whole bunch to transfer like the first time ... still showing up in app window, still taking a long time to synch and saying that it is loading, and app percentage of disk space grows accordingly on device (in itunes monitor window). Go to iPhoto on device .... Only pictures are the ones taken by that device. 
    Photos in the sunflower still work like always, just can't use the cool iPhoto on any of my pictures not taken by the ipad or iphone!!!! GRRRRR!!!!!

    This is happening on both the new iPad and iPhone 4.
    I wrote under time pressure yesterday,  here is more complete history.
    purchased iPhoto app on the New iPad, then plugged in, launched iTunes, went to App tab, went to File Sharing - selected iPhoto, Clicked Add... button, selected photos/iphoto ... used daisyA to select all and clicked open.
    All photo names appeared in the iPhoto Documents box. Then clicked Sync button (3 hours later) Sync complete - all photos listed in iPhoto Documents box in iTunes. Memory indicator shows application consumption of memory has grown appropriately for having added all those photos.
    eject and disconnect iPad .... no photos appear in iTunes except for those taken by the device. Did same  procedure on iPhone 4 .... same result. I can group, edit, view, and tinker with the photos taken by the device (ie iPhoto working as it should), however I can't see any of the photos from my long time iPhoto library not taken on this device that the iTunes file share window on the app tab says are there (and app memory usage also indicates are probably there). 
    Turned off both devices and then re-started -- no help
    Soft reset both devices (dimple & power key, hold till restart happens) - even though the power down / power up should do at least the same thing.  No help
    Deleted iPod Photo Cache in iPhoto app (home/pictures/right click iphoto show package contents ... )
    Synched again - no help
    Deleted all pictures listed on app tab in file share window for iPhoto iOS app.
    Synched - indicator for amount of memory used by apps decreases appropriately
    Still can see and use photos taken by device and no others
    Powered down then re- started device again.
    Plugged in and open iTunes, use file share window on app tab to add just a dozen pictures this time (instead of all).  Then sync - Still cannot see the pictures in the iPhoto app on the device .... file share window on app tab of iTunes says they are there. Indicator for memory useage says they are there - progress bar during sync says they are being added, I just cant see them in the iPhoto iOS app when I click on the Photos selector in the iOS iPhoto app. 
    Photos are on the iPad and synching with the ipad from iphoto into the sunflower app that comes with the devices. Just won't go into iPhoto! 

Maybe you are looking for