DVD Playback Freezing and Skipping

I know there have been a million posts on this topic (I've perused many of them), but I thought I would post my own specifics in hopes of getting an answer that might help. I have a 62 minute video project (high school football highlight video) that I put together in FCP. I exported the Video as an MPEG2 16:9 Best Quality 120 minutes using Compressor. The Audio is Dolby2 AC3 format as most posts have recommended. I am building and formatting using the default settings on DVDSP. The playback is fine about half way through but starts to skip, pixilate and freeze on an off after that. Using Memorex, DVD-R (16x, 4.7GB, 120min) media for burning with my iMac internal DVD burner. Original footage is basic Digital 8 video captured on a Sony video camera. Is there anything that I can do with settings or other factors that will fix this problem.
Thanks in advance for any suggestions.

Thanks, I will try another option. What about the video compression. Is there a better format to compress the video files to? That is the only other variable that I can see with my limited experience.

Similar Messages

  • Export QuickTimes freeze and skip while playing back

    I’m new to Motion, and growing concerned. I’ve purchased and learned Motion for a specific job. I’ve built some very cool elements with many layers. I’ve grown accustom to the slow performance, skipping etc. while working on the project. That’s ok.
    What concerns me is exporting. When exporting Draft or Best versions, most all the time the movies freeze or skip while playing back, either in QuickTime or Final Cut Pro
    When exporting I select Export, as QuickTime Movie, using current project settings
    I’m using Motion 3.02-HDV 1080-60i project, 10 seconds long
    4x 2.5 Ghz G5
    5 GB Ram
    I would appreciate and advice or tricks to be able to export a decent version of what I’ve built.
    Thanks!

    Andy, thanks for your help.
    I have 30 gigs available on the hardrive. The file exports are usually less than a gig. I have a GeForce 6600 card.
    When I select export setting from “current project settings” it uses the Animation codec and plays with freezes and skips. But with in that video that does play well, it plays very clean and clear.
    When I change the export to 1080i60 at best quality, I’m guessing it uses the HDV codec? It does play back with out the skips and freezes. But it looks like **** with horizontal lines in titles stripes etc.
    Is there a way to make the 1080i60 video playback clean?
    Thanks!

  • Premiere Pro CC 2014 playback freezing and crashing with new iMac i7

    Using Premiere Pro CC 2014 and having constant playback freezing and software crashes on a brand new iMac i7.
    Here are the specs:
    iMac i7 4.0GHz 5k Retina
    32 GB Ram
    AMD Radeon R9 M295X 4GB graphics card
    512GB Solid State Drive
    I was on chat yesterday with an Adobe tech. Although playback/render settings show the OpenCL option to utilize the AMD graphics card for processing, I was advised to switch to "Software Only" as that card is not supported yet. I had to re-render my 45 minute documentary (which doesn't appear to be any faster than it was on my old 2011 iMac by the way) and it still has the same issues.
    So frustrating? Anyone else experiencing this? Any advice? I hope I didn't just buy this "super machine" in vein.
    Thanks,
    Jason

    Hi All,
    Taking some tips from Kevin Monahan. If you haven't already gone through this list please do so.
    Sign out from Creative Cloud, restart Premiere Pro, then sign in
    Update any GPU drivers
    Trash preferences
    Ensure Adobe preference files are set to read/write
    Delete media cache
    Remove plug-ins
    If you have AMD GPUs, make sure CUDA is not installed
    Repair permissions
    In Sequence Settings > Video Previews, change the codec to one that matches your footage
    Disconnect any third party hardware
    If you have a CUDA GPU, ensure that the Mercury Playback Engine is set to CUDA, not OpenCL
    Disable App Nap
    Reboot
    Best,
    Peter Garaway
    Adobe
    Premiere Pro

  • 60gb ipod photo keeps freezing and skipping through songs

    I've had my 60gb ipod photo for almost a year and it keeps freezing and skipping through songs and sometimes it won't respond to a reset. I have to let the battery run down in order to use it again. I have restored it several times and it seems to keep happenning at least once a week.I have the latest software for it. Is there any thing else I can do?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync what you  want
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:       
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    -  Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • Tv shows freezing and skipping

    I have been downloading and watching the TV show Top Chef from the iTunes store and while watching the last several episodes the video and audio will freeze and skip. Can anyone tell me what is going on? and how do I fix it? PLEASE!!! I found two topics about this one was marked answered and I tried what they suggested and it did not work the other was posted back in Nov. and has had no responses.

    You have to contact iTunes customer support.
    They'll give you a new download or credit your account.

  • Compressor is not working. When I export to compressor from FCP to encode DVD, FCP freezes and Compressor appears to be working but the progress bar never fills no files are created. I'm using a MacBook Pro 10.6.7 version 2.66 GHz core 2 Duo 4GB 1067 MH

    Compressor is not working. When I export to compressor from FCP to encode DVD, FCP freezes and Compressor appears to be working but the progress bar never fills no files are created. I'm using a MacBook Pro 10.6.7 version 2.66 GHz core 2 Duo 4GB 1067 MH. I'm not new at this. I re-installed FCP successfully. I trashed the preferences. Please help.

    Do you have any filters applied to your clips?
    This happened to me before, I accidently had applied a broadcast safe filter to a color matte that was black....
    I figured it out by duplicating my sequence and deleting items from my timeline 1 by 1 until I was able to export a reference movie.
    Anywho, export again, this time with "self contained" movie selected.
    Then try to import to Compressor.

  • I updated to IOS 7 on my Ipad 2 and now videos will not play, they freeze and skip and will not play.

    I updated to IOS 7 on my Ipad 2 and now videos will not play, they freeze and skip and will not play.  Can anyone help?

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
    How much Available storage space do you have?
    iOS 7: Help with how to fix a crashing app on iPhone, iPad (Mini), and iPod Touch
    http://teachmeios.com/help-with-how-to-fix-a-crashing-app-on-iphone-ipad-mini-an d-ipod-touch/
     Cheers, Tom

  • DVD player pauses and skips.

    My DVD player skips? When I play a DVD in my Mac Mini, viewing it with a 32" LCD TV, the dvd will stop and pause. It's kind of like a skip, but it does not pixelate or anything?
    Is my DVD player broken?

    Hello there,
    THanks for your answers. I just got a new 42" plasma TV. We watched a DVD and it didn't have any problems! Maybe the problem was the wiring from the LCD tv. It seems to easy to just be getting a new TV. I am going to try a few more DVD's just in case.
    Ya it was skipping on all DVD's. Chick flixs, action movies, you name it.
    I didn't have anything open besides the DVD player while watching movies.
    I will keep you posted. thanks.

  • FREEZING AND SKIPPING ON IPOD

    I received a message that my Ipod was corrupted and I had to reinstall to factory settings. I did that and since then my Ipod freezes when playing and skips songs. Does anyone have any suggestions on how to fix this?
    Thank you.
    Dell   Windows XP  

    ] Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
    Tips
    a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
    b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
    c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
    http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921

  • I cannot watch any TV shows on Itunes. The episode will play for a few seconds and then freeze and skip forward randomly. I have a Windows 7 PC and I didn't have problems before the Itunes 11 update. Any ideas?

    After updating to ITunes 11 a while back, I am no longer able to watch TV shows on my laptop. If I try to watch an episode, it freezes and then skips forward randomly. I have a Windows 7 laptop and I didn't have any problems before ITunes 11.

    I don't use a graphics card, I use on board graphics as my computer case is too small to fit a graphics card inside.
    There are no effects applied to the clip, only one layer of video and 1 layer of audio (both from the same file). The video is in MP4 format at 720p.
    Before I rendered the sequence, I had a yellow bar above the sequence. Also, I imported the same clip into CC Standard and it played fine (also had a yellow bar) with no lag.
    I think I've fixed the issue now as rendering the sequence made the video play smoothly with no apparent issues.
    If any other clips have lag or any other problems in CC 2014, I'll just import them into CC standard and see if that works.

  • Why does my ipod keep freezing and skipping songs?

    I have the 80GB Ipod Classic, and for some reason it keeps skipping songs, for instance, whenever I go to look under a certain artist or a playlist of even just under "songs" I'll pick one and then it will skip one or two or ten, and there are some songs it just doesn't allow me to listen to anymore. Only on my ipod though, not on itunes. It also keeps freezing and will sometimes just stop in the middle of a song and skip to a new one. I've tried resetting it, and leaving it alone for a few days and letting it charge and leaving it off. Nothing seems to work.
    What can I do?

    I had this problem with my old 20GB classic ipod, it all started when I began using my ipod for my running trainings, every day it used to get worse freezing every 10 minutos or so, then I got ****** and bought a new 80GB classic Ipod, I have it for about 3 weeks now and guess what? It started freezing or skiping songs also. I did a test where I synced the same library on my both ipod and the songs being skipped on my new one wasnt being skipped on the old one, so its a problem with the song, then I though it could be any damage in the ipod HD but my new ipod has no reason to be damaged, the only impact that it might have recived is from my running trainings, but the impacts are really weak. Other test I did was trying to remove the song being skiped from the ipod, everytime I did that my ipod couldnt be ejcted, it kept showing me the following message "The ipod canot be ejcted because it contains files that are used by another aplication." I had to unplug my ipod without ejecting it.

  • IPOD FREEZING AND SKIPPING SONGS

    hi,
    i've had my ipod for about 6 years or so. just recently it's start to freeze and slow up on me. if i'm listening to songs and press the next song. it takes ages for the next song to come on or else it freezes. Also during some songs it skips on me as if part of the song is missing.
    what to do? any help would be much appreciated

    I had this problem with my old 20GB classic ipod, it all started when I began using my ipod for my running trainings, every day it used to get worse freezing every 10 minutos or so, then I got ****** and bought a new 80GB classic Ipod, I have it for about 3 weeks now and guess what? It started freezing or skiping songs also. I did a test where I synced the same library on my both ipod and the songs being skipped on my new one wasnt being skipped on the old one, so its a problem with the song, then I though it could be any damage in the ipod HD but my new ipod has no reason to be damaged, the only impact that it might have recived is from my running trainings, but the impacts are really weak. Other test I did was trying to remove the song being skiped from the ipod, everytime I did that my ipod couldnt be ejcted, it kept showing me the following message "The ipod canot be ejcted because it contains files that are used by another aplication." I had to unplug my ipod without ejecting it.

  • DVD Player freezes and quits midway through movie

    Hello,
    I tried to find a topic like this already in existence, but I had no luck, so I decided to post one of my own. Today my DVD Player has been acting up. I rented a couple of DVDs from Blockbuster and tried to watch them on my computer. The one I watched yesterday worked fine. Today, however, the player froze up and went to spinning beach ball of death about halfway through the movie. It suggested I check the DVD for scratches, and I did, but it's fine. Just in case, though, I tried to put in another movie. This time, the DVD got through the previews and to the menu before doing the same thing. Can somebody give me an idea as to what is going on and how I can fix it? Is my computer just 'tired' from being on all day?

    Yup same problem here, started after I upgraded to 10.6.4 in late June, when my MacBook Pro was less than 2 months old.
    Apple replaced the optical drive, same problem.
    The fix can be easy such as restarting the DVD player or ejecting the disc and putting it back in, to rebooting the laptop. When it won't read the disc at all I have to do an optical drive reset, which always fixes the problem, for awhile anyway.
    I've struggled with trying to duplicate the problem- I've been in to the genius bar four times now and they say they can't do anything more until I can duplicate it. I've done an archive install, they suggest a clean install which I'm reluctant to do at this point.
    It seems to be related to-
    1) how long the computer has been running since the last reboot- a day of surfing increases chances of error
    2) power- if I go on battery power for awhile I'll almost always get a quits unexpectedly. That seems to be the start of a downward slide, where eventually it won't read a disc at all. It's also telling that an optical drive reset, which resets the power to the optical drive, always fixes the problem.
    Turns out the power cord was slowly going south, which multiplied the number of dvd errors. Apple gave me a new power cord late August and the dvd errors are less frequent, tho still 2-3x/week.
    The quits unexpectedly errors are usually SIGSEGV and SIGBUS.

  • ITunes video playback freezing and out of sync from audio problem

    There's one thing that bugs me more than the non-responses I get from Apple Support is when I try to watch a movie on iTunes and during the action parts or exciting scenes, the video freezes and pauses from the audio for a few seconds. It happens quite often during video play. How can this matter be solved and I can watch a movie that costs WAY too much to buy on iTunes and actually enjoy it for once? Anybody? Hello? Bueller?

    Q? Are you using Quicktime to play the video on your PC or other video player like Real Player?
    As some 3rd party players may not sinc right or you may have to download a newer codec.
    I use GOM player and it works well on my PC for video from iPhone 4S.
    Hope this helps.
    Greg

  • Leopard installed, DVD now freezes and stalls within seconds

    I have a G5 1.8ghz with 1.25GB of ram. The DVD player starts, but freezes after a few seconds of disjointed video playback. Audio continues, but the pointer turns into a permanent 'swirl' and the computer hangs. I can't then stop the player or eject the disk.The only thing I can do to regain control is switch it off at the wall. I tried deleting the DVD folder under Library settings as suggested by another user, but the system just re-creates it and the problem continues. HELP PLEASE?

    I first posted this question two days ago. Meanwhile, I left the machine plugged in and stashed in the corner. Last night, as I was about to go to bed, I noticed the "sleep" behavior coming from my TiBook - the brightening and fading of the apple light on the cover!
    I opened the lid and viola - it was running, my mouse worked, the menus worked, I could close it down or restart it as normal, I could change between OS9 and OXS like before - in short, it was back to normal.
    So I now have the answer to "what to do?" Just leave it plugged in for a few days.

Maybe you are looking for

  • Procurement Coordinator received Authorization Error when creating Bid Inv

    Hi All,         In SRM I have an issue Please help me in solving this. Please see below               Procurement Coordinator received Authorization Error when creating Bid Invitation from Sourcing Cockpit.  Message states u201CMissing Transaction BB

  • Outlook task list sync?

    Is there a way that I can sync my Itouch to my outlook task list? I really need some help.

  • Webcenter

    using webcenter ps3 and ucm 11g I added document explorer in my webcenter page. i am able to see the ucm file in explorer. I am able to see the edit button in "Basic" section. But I do not see the Edit button in "Advanced" section. I want to edit the

  • Concurrent Processing

    After starting Apps. and going to the apllication manager I noticed that there is a X under concurrent processing and a tick under the others. Is this X a problem? I didn't noticed any errors when running the startup scripts, all the exit stauses was

  • Open link with middle click to a new tab goes back to original page when selected

    Scenario: I am on a page (eg. a google search) and middle click a link to open it in a new TAB. The page opens in an adjacent TAB. I may or may not open other links in the same way. Problem: As soon as I select anyone of these new TABS it automatical