Dvd player and uverse

I want to hook up my dvd player, and I know that uverse router won't work. I cannot hook it up to my tv because my tv is built into the wall. If I bought a wireless dvd, would it work with uverse?

Sorry, U-verse cannot take any input from others & I have never seen a DVD that can connect to a TV wireless.
I have seen TVs with built in DVDs. BUt, you do not want a new TV.
How is the uverse box connected to the TV? Is it the same as you want to use for the dvd. Unplug the U-verse & plug it in to the DVD. If you can do that you can get an HDMI switch.
How about jacks on the side or front of the TV. What is model numbers on TV & DVD?
To go back to the wireless - I believe Chromecast is a wireless connection to the TV. Can you plug a dongle in to an HDMI jack on the TV?
You would then play your DVD on your computer & cast it wirelessly to the TV via the chromecast.

Similar Messages

I'm having a problem connecting my BlueRay DVD player and other non-Mac devices to my wireless network. Is there a limit on the number of devices I can connect to my AirPort? I never have a problem connecting an Apple device (AirBook, iPad, etc).

I'm having a problem connecting my BlueRay DVD player and other non-Mac devices to my AirPort Express network. Is there a limit on the number of devices I can connect to the wireless network? I never have a problem connecting a new Apple product (AirBook, iPad) and even a basic laptop. Thanks for your help.

The AirPort Express Base Station (AX) can support up to ten (10) simultaneously connected Wi-Fi clients.

Dvd studio pro: DVDs won't work on DVD player and windows computer

Hi
I have burnt some dvds on DVD Studio Pro I checked they were set to SD and PAL and have played them on my MAC and DVD player no problem but now I am hearing back from my client that they tried playing them on their windows computer and laptop and their DVD player and it isn't working what could be the reason for this?
From Mike

You can see if they have another software player available. Usually VLC is a good option. Windows player can be a bit all over the place depending on patches of the OS and other items. I have encountered some strange things, including people claiming that DVDs I have authored were doing things that had nothing to do with the DVD (beyond the scope of what a DVD can do, etc.)
When you say DVD Player, does this mean they are also trying to play it in a DVD Player (real player and not in computer?) How did you burn the DVD? Straight from DVD SP? Check first play settings and other items?
These are some of the first things I would be starting with, particularly if real DVD players (not in computers) are concerned. It also can be something as small as dirt or scratches on the DVD itself. Some machines can be better at compensating than others are.

IMac will not play the DVD that I have made on imovie and burned on iMac SuperDrive ?? (DVD plays fine on household DVD player and also play fine in Toshiba laptop ) Why not on the iMac - anyone know???

iMac will not play the DVD that I have made on imovie and burned on iMac SuperDrive ?? (DVD plays fine on household DVD player and also plays fine on Toshiba laptop ) Why not on the iMac - anyone know???

There are many reasons this could be the case but whether an optical disc can be read or not is a function of:
The reflective media layer of the disc
Whether the burned disc was a DVD-R, DVD+R, DVD-RW, DVD+RW
The brand, model, and production lot of the disc
The specific frequency of the Write lasers that burned the disc
The specific frequency of the Read lasers that are attempting to read the disc
Are the Read lasers in the drive working (it is common for one set of lasers in a drive to fail while others continue to work)
How old are the Write and Read drives (laser frequencies change with age)
Is there dust on the read laser
Is there dust on the read lens
etc.
At one time it was estimated that fewer than 80% of all burned discs were readable in 90% of the drives. That has, I believe improved over time but at the same time it seems the faillure rate of lasers in the drives has increased but that may simply be the result of how many different read and write lasers there are in today's superdrives. Fortunately todays drives are a lot less expensive the replace -- now that Apple no longer installs optical drives in their computers.

A few months ago, I purchased a new iMac. I recently created a movie using iMovie. Then I found out that iDVD is not included. So I have the problem that I want to burn a movie that I can play on my DVD player and watch on a television. i rang Applecare a

A few months ago, I purchased a new iMac. I recently created a movie using iMovie. Then I found out that iDVD is not included. So I have the problem that I want to burn a movie that I can play on my DVD player and watch on a television. I rang Applecare and was told that I need a program called BURN.
Is this correct? I can export the movie from iMovie in a m4v format, but I think I need to convert this to iso format before I can burn the disc.
I know there are programs like TOAST that will do this, but it is expensive.
I would be very grateful for any assistance.

Burn will not do what you want, and there is no real substutute for iDVD.
Why is there no iDVD on my new Mac?
Apple insists that the entire world has access to fast broadband (and are prepared to pay for the considerable bandwidth usage) and wants to distribute home movies to friends and relatives via download (iCloud, YouTube, Facebook, whatever) rather than mailing them a DVD. The fact that in reality not all users do, has so far had no effect on this policy. If you scream and shout loudly enough down the phone Apple may send you a free copy of iDVD. Stating that they would return their brand new Mac unless they received a copy of iDVD worked for some, but that is now said to have been withdrawn by Apple.
Also, you can complain bitterly via Apple’s Feedback link, perhaps suggesting that Apple could have provided a choice between burning DVDs and distributing home movies by other means. You may feel that Apple should not dictate how you destribute family videos or photos to distant relatives and friends, and should not assume that every user is prepared to pay for the excessive bandwidth usage charged by ISPs for huge downloads from the App Store:
http://www.apple.com/feedback/
Whilst Macs with a Superdrive continue to be able to burn video DVDs, the software for so doing, iDVD, is no longer included in the iLife bundle that came with OS 10.7 Lion (which also omitted iWeb) or that comes with OS 10.8 Mountain Lion. And it is no longer included in the iLife 11 from the online Apple Store: http://www.apple.com/ilife/. Your only solution is to look on Amazon or eBay and try to get an older version that includes iDVD 7, i.e. iLife version 9 onwards. You should also do this if you plan to buy a new Mac anytime soon, as stocks of iLife that include iDVD will not be available for ever.
However, the vastly more expensive FCPX can burn a DVD without iDVD or DVD Studio Pro involvement, but lack the themes etc of iDVD. Also, of course, there is Roxio Toast, which is the best software for burning anything but again does not offer the flexibility of iDVD.
And if you think Microsoft are any better, their new Windows 8 operating system will not play DVDs, or burn them, unless customers buy an extra upgrade, the company has announced: http://www.gizmag.com/windows-8-no-dvd-playback/22443/
In other words, computer manufacturers have declared optical media as dead, long before consumers are ready to stop using them, which is fine as long as they offered us a choice, but they won’t even do that. Flexibility and intuitive use of a computer seems to be a thing of the past.

Burning DVD for DVD Player and Computer

Hi everybody.
I thought that I saw this somewhere here, but after looking for it for the past 1 1/2 hours (Unsuccessfully I might add , I thought that I would just ask.
When I burn a project to a DVD using Quicktime and iDVD, I can view it on a DVD player and on my Apple computers, but not on a windows based machine. Can I burn a DVD that will play on any computer? How?
Thanks in advance for the help.
Brian

Could well be a +R issue. The player must be able to read +R.
-R is the most universal and should play on just about any DVD machine.
I noticed that the older the machine the more things things can go wrong for no apparent reason. Later model stuff play just about anything even +R, dual layer, RAM etc. Always check the player specs if you have them.
Al

I have a Cisco/Linksys WRT-54G wireless router and 2 Airport Extremes (the small ones that plug directly into the wall). Is it possible to extend the network from the router using these two AEs? I have a DVD player and Ext HD plugged into the router too..

I have a Cisco/Linksys WRT-54G wireless router and 2 Airport Extremes (the small ones that plug directly into the wall). Is it possible to extend the network from the router using these two AEs? I have a DVD player and Ext HD plugged into the router too. Any ideas? I'm guessing the only way is to do what I've seen in these community pages which states that it can be done but it will drop the bandwidth by 50%. Thoughts?? Thanks!

The Cisco/Linksys WRT-54G was one of the very few routers said to be compatible with Apple's implementation of WDS (Wireless Distribution System) settings.
The info that I have on file indicates that only the WRT-54G versions 4 and under were compatible, so that would be one bridge to cross.
Even if you find that your Cisco/Linksys might be the right version, Apple never published instructions on how to configure the Express devices with other manufactures, so users were left to their own devices to try to figure out how to get things working. Apple's instructions to connect to other Apple devices are in the link below:
WDS network
If you were hoping to use 2 Express devices in this type of configuration...even if it works...the bandwidth penalties will be extremely severe.
The first Express drops the bandwidth (and speed) on the entire network in half and the second halves everything again. So, the result, in effect would be a "g" wireless network running at 25% speed. Few users would consider installing this type of network.
At this point, it becomes one of those things where the fact that you might be able to do something does not mean that there would be much value in doing so. But, it is your decision to decide if you want to try to proceed.

How do I show my keynote file on a dvd player and control the slides?

how do I show my keynote file on a dvd player and control the slides with the skip or next chapter command on the dvd remote? when I export to quicktime, it changes slides on a timed basis. I want the chapter button on a dvd remote to act like a mouse click would.

Hi Robert
You have to export the individual slides from your Keynote presentation, and then import them into your DVD application.
I use DVDStudioPro - it works fine this. I'm sure iDVD will be OK.Going via QT has never worked for me.
Regards Robert
G4(7 y.o)1.5GHz 1.25 GB Ram, 2x120GB intHD, orig AGP & Radeon 9200 PCI card Mac OS X (10.4.8) 2monitors, CRT TV, FCP5.0.4, DVDSP4.1.1, STP1.1, Comp2.3, LT2.1, QT7.1.3

Button action with desk DVD player and PC player

HI!
I built and burn a DVD with one menu with several buttons triggering different chapters. Before the menu I have a small introduction clip.
This works perfectly on my desk DVD player, but on any computer I get the introduction clip, then the menu, but the buttons don't have any action. Did I forget something.
Thank you

Thanks for the info.
Interesting, that they work fine in Preview and on set-top player. I do not have/know WinDVD, so I'm not sure of what problems it might have. I happen to use other software DVD players, and so far, they all work like my set-tops and Preview.
I'm assuming that when the left-mouse button is over your Button and pushed, nothing happens. Does the Button Highlight? Your described PS work should not have altered the Button's ability to function. If they work elsewhere, they *should* work in a software player. I assume that ALL Buttons exhibit this behavior?
Maybe someone can help with WinDVD. Might be something very simple, that's just beyond my knowledge.
Other than to say your Project looks good in detail, I can't really help - sorry.
Hunt

How to connect JVC DVd player and video cassette recorder to QIP 7100 and Panasonic TC-32lx44

What cables do I need to connect my DVD/VCR recorder through my QIP 7100 to see on my TV? I would appreciate any assistance with this since I am a novice.
Thanks
Solved!
Go to Solution.

You cannot run ANY signal through a Set top box to a Television. The only input on the boxes that is actually functional is the coaxial cable. The only way your are going to connect your DVD player to the TV is via one of the AV inputs on the Television itself.
Hopefully your Television has at least 2 sets of AV inputs, because you are going to need them. 1 for the VCR and 1 for the DVD player.
Depending upon the TV, VCR and DVD player, the connections possible are:
1). HDMI cable from TV to DVD if the DVD player has HDMI and the TV has a 2nd HDMI input. It is very unlikely your VCR supports HDMI.
2). Component Video (RGB) plus Audio AV cables from audio and component outputs on the DVD player to a set of component and coresponding audio inputs on the Television. It is unlikely that your VCR supports component video.
3). S-VHS cable from DVD player or VCR to S-VHS input on the TV (if there is one), and audio AV cables from the audio outputs on the DVD/VCR player to the corresponding audio input on the TV for the S-VHS cable. If S-VHS is not available, you can use composite video instead. HDMI and Component video will give you the best picture and composite video will give you the lowest quality picture, but depending upon the equipment, your VCR may not have an S-VHS output available.

Tutorial on how to connect my Inspire T5400 5.1 to both my DVD player and my computer

I am not really sure on how to go about it, whether I can buy something that I plug my speakers into then from there splits into two sets one for my pc one for my dvd player. Not sure whether I have to splice anything or cut anything... so could osmeone please give me some type of clue on how to go about it. Thank you very much. Please use lamen terms and give plenty of detail! Thanks you!
DVD Player
http://i2.photobucket.com/albums/y44...welary0030.jpg
Computer
http://i2.photobucket.com/albums/y44...welary0033.jpg
Subwoofer connectors
http://i2.photobucket.com/albums/y44...welary0032.jpg

JustinGB,
You will need to get a 3.5mm stereo minijack to dual RCA cable. The minijack end will go to the subwoofer output jack and the dual RCA end to the DVD player(5.1 channel output end).
Connection wise, the subwoofer front output(green) to your DVD player Front, subwoofer rear output(black) to your DVD player Surround, subwoofer center output(orange) to your DVD player Center and Subwoofer.
Jason

HT2499 I ejected ACDs from my Mac Pro DVD player and now there is just a black screen with DVD player and the Apple insignia the bottom right corner. I can't get anything to turn on and shut this down. Got stuck. What do I do?

On my MacBook Pro I finished using a CD and it ejected. Then I have a black screen just a DVD player showing on the bottom of a black screen. I can't do anything with my cursor at all nothing opens up and I don't know how to get that off the screen and start using the computer again – thanks for any help you can give me

Hi there,
You may need to force quit the application. Take a look at the article below for more information.
Mac OS X: How to quit an unresponsive application using Force Quit
http://support.apple.com/kb/ht3411
-Griff W.

How can I watch MKVs on a DVD player and keep 5.1?

Hi,
I have several MKV files which I want to convert to play in a DVD player/Xbox 360.
I want to keep the hi def and 5.1 sound in the newly encoded file.
I have tried using Handbrake with some success. The video is outputted in hi def and it plays in my Xbox but for some reason Handbrake keeps downmixing the audio to stereo.
Is there a professional package that can do the job? How can I watch MKVs on my players and keep 5.1 surround sound?
Message was edited by: Silvine

miguelflores13 wrote:
my tv has the 3 red, white, and yellow rca inputs for left and right audio channels and video. any adaptors out there? i cant find any.
You need a Thunderbolt or mini DisplayPort to composite converter like this one:
http://www.amazon.com/DisplayPort-Composite-Video-S-Video-Converter/dp/B004VIZWZ A
Yikes, unless you can find one for much less than that, I'd put than kind of money toward a TV with HDMI connections.

I need to install a dvd player, and I don't have HP recovery Manager as well

how to I reinstall my dvd player if i don;t have HP recovery manager.
This question was solved.
View Solution.

Hi Woliver 1
You can go to this link and search drivers by product name or number.
http://www8.hp.com/us/en/drivers.html
Although I am a HP Employee, I am speaking for myself and not for HP.
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.

Playable on DVD Player and standalone files

Is it possible to author a DVD so its playable on a DVD player but as well have files that can be taken off (ie a folder of pictures)?
Thank you in advance

Yup
Add a DVD-Rom folder to the project with all the items you want (pictures etc.)
Click on the Disc in the Upper Left Blue here
http://dvdstepbystep.com/layofland.php
And in the lower right purple area in General tab select where the items are that you want to include. Put them all in the one folder you are selecting.

Dvd player and uverse

Similar Messages

Maybe you are looking for