Dvd player failing - How to install OS for experts
Hello there,
tricky situation here. I'm the owner of a nice macbook white (old generation 1.83 Core Duo). Sfter 3 years the machine is still working quite well, the video card is not at its best but the machine is still working fine. Now recenlty the dvd player on my macbook has been acting up, it would not read some discs etc, it was a sort of a mirable when I managed to reinstall Tiger.
Now the machine could be fine with Tiger but I would like to use Leopard on it.The problem is I can not install it on the macbook, the player is not very realiable anymore. Now I own an imac 24" that has been bought a few weks ago...I thought I would connect the two machines with a firewire cable and do the assistant migrator etc BUT it's almost impossible to find the specific cable her ein my hometown. I honestly don't want to spend a fortune buying it online....so I was thinking about using a USB cable instead....would that be possible? if yes, what is the procedure I have to follow?
thanx in advance to all the persons who will give me some help with this task
Hi there and welcome back to Apple Discussions!
There are two ways of performing this task, and one is easier than the other. For both, you must have a Firewire 400 cable. You can buy these for a few bucks on ebay (at least 6 footer, 6 pin to 6 pin).
1.Use Target Disk Mode to complete the installation from a 10.5 Retail Install DVD in the iMac.
http://support.apple.com/kb/HT1661
Once the Macbook is booted into Target mode, start the iMac up from the Install DVD. The Target Disk should then be available for installation.
2. If you have problems with that method, there is another workaround that is a little more complicated. You can install 10.5 onto partition/external drive of your imac, and use Disk Utility to "restore" it to the Macbook's hard drive (via TDM). You shouldn't have to do it this way, and method one should work fine. But this is a second way just in case.
You will not be able to use a USB cable, as there is yet no way to connect two macs via a USB cable. An external hard drive is the only way to transfer information via USB.
If you have any questions, just let me know!
Good luck!
Similar Messages
-
Using OS X 10.8.4. Installed iLife 11 and got iDVD. iMovie ready in iDVD. Attempted burn. iDVD says burn is complete. Burn lines are on DVD+R. Same disk cannot be read and is considered blank by computer and DVD player. How do I burn properly?
Hello TchrDi,
I suggest this article named Archived - iDVD: Troubleshooting issues with burning discs found here http://support.apple.com/kb/ht1583.
It is pretty lengthy, but also pretty thorough.
Cheers,
Sterling -
I have an '09 macbook and want to select specific pictures to put on a disc that will play on my televisions dvd player. How do I do that?
OM gosh! After working on this for 2 days, by golly, I got it! I used Free App DVD Creator. I had first tried to burn the disc in PAL Format.....wrong format for the good 'ol USA. After a little research I learned that the USA format is NTS.....so I chose that and it worked! I now have a disc I can play on our dvd player on the TV. Thanks all for above assistance. Problem now solved!
-
when i burn videos to a dvd-r disc it works on my macbook but not on a windows/pc or my dvd player. How can i make it work on all the above and not just a mac product?
Unfortunately, the recording & movie industry does not respect the rights of the people who make them money, and thus you can only use the paid-for content in ways they see fit. Even if I lived in a bunker where no one else could possibly see the movie I paid for, therefor I'm not 'sharing it illegally', I would still not be allowed in a blue moon to copy that movie to DVD for TV viewing. Someone will tell you to get an AppleTV. How about Apple give us one for free? Until this changes, people wanting to use their content in multiple locations will continue to download music & movies via torrents, legally or illegally.
-
How to install extension for all users?
How to install extensions for all users? I'am using Windows
Vista sp1 x64 and Adobe Extension Manager 2.0.274. "Run as
administrator" doens't work.Xych wrote:
> How to install extensions for all users? I'am using
Windows Vista sp1 x64 and Adobe Extension Manager 2.0.274. "Run as
administrator" doens't work.
You may have to log in as the Administrator user rather than
"run as adminstrator".
Beyond that, are there really enough users on a system that
they can't install the extension(s) they need themselves?
Danilo Celic
|
http://blog.extensioneering.com/
| WebAssist Extensioneer
| Adobe Community Expert -
How to install Workshop for WebLogic and WebLogic Portal?
Hi All,
I am new to Weblogic Portal. I would like to start learning Oracle Weblogic Portals..
Can anyone please guide me, how to install Workshop for WebLogic and WebLogic Portal?
As per the ""Tutorials – Getting Started with WebLogic Portal"" (http://download.oracle.com/docs/cd/E13155_01/wlp/docs103/tutorials/setup_dev_env.html)
we need to install the Workshop for WebLogic and WebLogic Portal.
Please suggest me where should i get the required environments/IDE?
Thanks,
Harish.Hi Harish
1. If this is your first time with Weblogic Portal, I would recommend to download the latest Weblogic Portal Software Rel 10.3.2 from this bottom link. Check Accept Radio button, for windows download windows installer. Its about 1 GB file. This software includes Eclipse IDE, Weblogic Server and Weblogic Portal.
http://www.oracle.com/technology/software/products/wlp/index.html
2. During the installation process, make sure at one point you select Custom mode (NOT default Typical mode). In next following screens you will see all bundles checked EXCEPT for Samples. So make sure you check Samples Check box both under Weblogic Server and Weblogic Portal. Then proceed. This will install full Weblogic Workshop (Eclipse IDE), Weblogic Server and Weblogic Portal. This is the good installation package. Also it will install samples for Portal and Server. If you select all default typical mode, it will NOT install samples. You can install samples later on also, but its good at installation time itself you select custom and check Samples also.
3. WLP 10.3.2 uses Eclipse IDE. If you are familiar with Eclipse IDE this should be helpful. Otherwise also, its ok.
4. For learning WLP, in Eclipse IDE, you need to create Portal EAR Project, then Portal Web Project. Inside portal web project create simple jsp hello world portlets and a simple portal.
5. For Deploying and Testing Portal application you need to create Portal Domain using config wizard. You can see this from Start -> Programs -> Oracle Weblogic Portal shortcut -> Weblogic Server -> Tools -> Configuration Wizard.
6. You can start Workshop IDE from Start -> Program Files -> Oracle Weblogic Portal ...-> Eclipse For Weblogic 10.3.2
Here are the links for quick start guide for portal development. Please do refer them.
http://download.oracle.com/docs/cd/E13155_01/wlp/docs103/tutorials/index.html
http://download.oracle.com/docs/cd/E13155_01/wlp/docs103/quickstart/newproject.html
HTH
Ravi Jegga -
How to install WebGUI for SAP 4.7 EE
Hi
How to install WebGui for SAP 4.7 E.E.
Regards
SriniFor this you need install ITS -->
http://help.sap.com/saphelp_47x200/helpdata/en/34/b20d38df9e9010e10000009b38f8cf/frameset.htm
and read all topiks like
SAP GUI for HTML Requirements
Starting the SAP GUI for HTML
Internet Transaction Server
Regards. -
Hi
How to install GRID for EBS applications.Any Docs please let me know
"E-Business management pack for GRID for monitoring EBS applications"Please refer to:
Note: 394448.1 - Getting Started with the Application Management Pack for Oracle E-Business Suite (Releases 2.0 and 2.0.1)
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=394448.1
Note: 568069.1 - How to Verify Grid Control Version And Application Management Pack Version Integrated With Oracle Applications EBS?
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=568069.1 -
How to install drivers for ati radeon 3200?and how to config xorg.co ?
how to install drivers for ati radeon 3200?and how to config xorg.conf?
mawch wrote:how to install drivers for ati radeon 3200?and how to config xorg.conf?
Hello
I am using ati hd 3200 which is integrated with my motherboard. If you are using arch you can download & install through pacman. The package is named like catalyst*. You can install them by issuing as root user
#pacman -Sy
#pacman -S -l | grep -i catalyst
#pacman -S catalyst catalyst-utils
After installation reboot your machine in runlevel 1. (single mode). Ensure "fglrx" module is loaded correctly using
#lsmod | grep -i fglrx
If the resultant output have "fglrx" part the module is loaded correctly. The next step is to create a working /etc/X11/xorg.conf. Backup your current xorg.conf if needed.
#cp /etc/X11/xorg.conf /etc/X11/xorg.conf.bkup
Then issue
#aticonfig --initial --input=/etc/X11/xorg.conf
This will create a new xorg.conf file. Now we can test our confign.
#telinit 3
I am using runlevel 3 to avoid graphic messup!!
issue
#gdm
If you graphical login screen works correctly there is nothing to do more except adjust your monitor resoloution as you like.
To know your ati driver is working correctly issue as root
#fgl_glxgears
If gears are rolling happily it seems correct. You can also know more about installed ati driver
#fglrxinfo
Now the installed driver version is in the output
If there is any problem try following
##### Soloutions to solve various display problems using ATI Catalyst Drivers in Linux #####
yes video playback is choppy until i ran :-
sudo aticonfig --overlay-type=Xv
Try adding the following to the 'Device' section in /etc/X11/xorg.conf
Option "TexturedVideo" "true"
### This is a half solution for mythtv problems. Run mythtv in window (no full screen) If You have a screen resolution of 1024x768 try the command;
mythfrontend --geometry 800x600
Append the "Device" Section of /etc/X11/xorg.conf file as follows;
Section "Device"
Identifier "Videocard0"
Driver "fglrx"
Option "OpenGLOverlay" "off"
Option "VideoOverlay" "on"
Option "TexturedVideo" "on"
Option "TexturedVideoSync" "on"
Option "Capabilities" "0x00000800"
BusID "PCI:1:0:0"
EndSection
Add following in the .bashrc of each user or /etc/bashrc file* Most Effective In My Case!!
export LIBGL_ALWAYS_INDIRECT=true
####### Arch Linux - Add the "nopat" option to the /boot/grub/menu.lst or /boot/grub/grub.conf
####### as in the following example
title Archlinux Ice Kernel
root (hd0,1)
kernel /boot/vmlinuz26-ice root=/dev/sda2 ro resume=/dev/sda3 quiet splash nopat
initrd /boot/kernel26-ice.img
NB: REGULAR DISCLAIMER IS ALSO APPLICABLE TO THE ABOVE MATTER; USE IT AT YOUR OWN RISK !!! ALL THE ABOVE INFORMATION IS COLLECTED FROM VARIOUS POSTINGS IN THE FORUM AND FROM MY OWN EXPERIENCE
Wish U good luck
mvdvarrier -
How to install safari for mac .... after deleting it
how to install safari for mac .... after deleting it
so i had a mallwere saying call the x number so that we can fix ur safari and i didnt call them because its not a USA number . so i had to delete the safari from my mac ... now i want to install it again ... and am not able to do that can someone help me out with that ? thanks...
KaramYou will have to reinstall OS X. In the future ignore such things. Don't click on any links or dial any phone numbers. They are all phishing scams.
Deleting Safari was not a solution.
Remove Browser Pop-up Problems
AdwareMedic
Adblock Plus 1.8.9
remove adware that displays pop-up ads and graphics on your Mac -
How to install license for expired SAP J2EE engine?
Hi,
I had used evaluation copy of the SAP J2EE engine. This copy works for few days and now the SAP J2EE engine is stopped. After its expiration, we purchased the permanent license.
My question is: <b>how to install license for the expired SAP J2EE engine so that the engine can be started without re-installation?</b>
Waiting for the reply.
regards,
AnandDear Anand ,
To install license of the J2EE Engine :
In the Visual Administrator -> Server 0 -> Services -> Licensing Adapter. Then choose tab page Runtime -> Installed Licenses and Install subsequent temporary license.
check the URL for further details :
http://help.sap.com/saphelp_nw70/helpdata/en/14/5e533e5ff4d064e10000000a114084/frameset.htm
Hope this will help you resolve issue .
Regards ,
Santosh -
I have tried to upgrade Painter 11 on my iMac running OS x 10.5.8 but get the error message : The following install step failed : run pre install script for Corel Painter11_SP1. Contact the software manufacturer for assistance "
I have contacted Corel and after several emails and one telephone call, they tell me , they cannot help but they think the problem could be with the OS.
Does anyone have any suggestions, please ?Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward. -
DVD player fails iMac i5 27inch
DVD player fails when attempting to play disk on external DVD drive
does it work if you use another dvd player program such as vlc ?
-
I have the serial number of my recently purchased software from a store but no DVD player to install. Is there another way to install my purchased product?
ok. Install it as described in this tech note
Download Photoshop Elements products | 13, 12, 11, 10 -
How to install DBM for SAP NW4 testdrive SR1 on linux
Hello all
I Have just succesfully installed a SAP NetWeaver 04 TESTDRIVE SR1 on linux with MaxDB 7.5.
Now I would like to have a DBM installed. With my old testdrive (WAS 6.20) for windows it was very well documented how to install and use the DBM, but it seems they forgot the DBM when they made the TESTDRIVE DVD.
How can I install a DBM for my linux testdrive ?
Best regards
Thomas Madsen NielsenHello,
on Linux the only GUI Tool for administrate the database
is the WEBDBM. It is a Webservice which runs in the
browser.
Further documentation can be found here:
http://help.sap.com/saphelp_erp2004/helpdata/en/e7/b8e0d20eea11d5a9f600a0c9449261/frameset.htm
Sorry for the late answer.
Best regards, Stefan
Maybe you are looking for
-
How do I exposed to a UI Automation Client that an offset in my RichText editor contains a link? I have a custom RichText editor in a C# WPF application. What interface would expose such information? ITextRange? ITextRangeProvider? When using a scree
-
Excel charts, embedded in Word 2007, strange appearance
I make charts in Excel with shapes, text, varying transparency, and layers. I then embed these charts (Paste Special>as Excel objects) into a Word document. When I convert the Word document to a pdf (Acrobat 8) the shapes, layers, line types and wei
-
hi all i m using ECC 6 version machine. in this i have to assign print program and script . can anybody tell how to assign the form and program.??? thanks well in advance... pvs
-
Transfer posting via notificatio
Hi, I am using the action box to do a transfer posting from unrestricted use stock to quality stock. However the system in std SAP does not change the storage location while doing the transfer posting. Do I need an enhancement for that? We have a
-
Series of tutorials available on the Animate team blog
Hi, folks- Just wanted to point out that I've posted a series of tutorials over the past couple of months on the Edge Animate team blog, which is hosted here: http://blogs.adobe.com/edge/ The latest got posted about fifteen minutes ago, so I'd sugges