Dvd player has dvd in it but will only eject about 1/4 inch and won't load or play
I [put a dvd in sony player and it says loading on the screen for about 30 seconds and the it says insert disc but the disc won't eject and only about a 1/4 inch of the tray ejects and then quickly retracts! I've done all the suggestions on line for unlocking a disc but they don't work. Help anyone?
Which model DVD player do you own?
Similar Messages
-
My MacBook Pro has 10.5.8 but came with 10.5.7 install disc and won't boot up and can't reinstall
My MacBook Pro has 10.5.8 but came with 10.5.7 install disc and won't boot up and can't reinstall.
the disc is spinning and I see the apple on the screen with the spinning gear and after a while it just turns off OR the few times it does get past that point when I go into disc utility it tells me that it can not install on this machine!
It's driving me crazy, please help!!!Welcome to the Apple community.
I'm not entirely sure I follow you here, home sharing comes with iTunes 10.2, so far as I am aware even iTunes 10.6.1 only requires OS X 10.5.8 or better. On that basis I'm not sure why you think you have a problem. -
FaceTime call to my iMac will only ring once then hang up and won't let me answer. How do I make it ring more times? I can call my iphone 4 from the imac with no problem but when I call my imac from my phone, it won't let me answer.
This article is pretty long but it has a troubleshooting guide near the bottom, and especially mentions your problem with a few things to try.
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-facetim e-set-up-use-and-troubleshooting-problems/ -
My question pretty much covers it. The program works fine usually about an hour and then when I go to load a page it comes up blank and you can see it is not searching. The only thing to do is go off internet and reconnect. Sometimes I have to shut the computer down.
The default of the pref network.http.max-connections has been increased from 30 to 256 in Firefox 6+ versions.
Try to decrease the value of the pref <b>network.http.max-connections</b> from 256 to 30 as used in Firefox 3 versions.
*https://support.mozilla.com/kb/Firefox+never+finishes+loading+certain+websites -
any advice?
I suspect you have a received a hack message via iMessage. I have been receiving this type of message for the past week. Once this hack message hit my phone, I will not be able to open the Message app again or it will go back to the home screen as soon as I open the app. You can still open existing conversation by going into 'Contact' and then try send a message to a contact with an existing conversation. Any attempt to start a new conversation via Contact will close the app and return to the Home screen.
So far my only way to deal with this is to turn off iMessage and survive on SMS text until Apple comes up with a fix to block this type of hack.
Sorry I can't be much help. -
I downloaded an album, and the download was interrupted. I went to the Store and completed the download, but several songs now appear as partial copies - they end ~ half way through. Is there any way to complete the download?
I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the items that are not playing properly. If you can't see "Report a Problem" next to the entries, click the "Report a problem" button. Now click the "Report a Problem" links next to the items.
(Not entirely sure what happens after you click that link, but fingers crossed it should be relatively straightforward.) -
How do I eject a DVD that just keeps turning in drive but will not eject?
How do I eject a DVD that just keeps turning in drive but will not eject?
check out Kappy's user tip:
Five ways to eject a stuck CD or DVD from the optical drive
Ejecting the stuck disc can usually be done in one of the following ways:
1. Restart the computer and after the chime press and hold down the left mouse button until the disc ejects.
2. Press the Eject button on your keyboard.
3. Click on the Eject button in the menubar.
4. Press COMMAND-E.
5. If none of the above work try this:
Open the Terminal application in your Utilities folder. At the prompt enter or paste the following: /usr/bin/drutil eject.
If this fails then try this:
Boot the computer into single-user mode. At the prompt enter the same command as used above.
To restart the computer enter "reboot" at the prompt without quotes. -
My Blu-Ray player has a USB input but it doesn't have an HDMI input. Can I connect my Apple TV to the Blu-Ray using an HDMI/ USB adapter? It would allow me to run the audio through my stereo. Thanks to all for your help.
Can I connect my Apple TV to the Blu-Ray using an HDMI/ USB adapter?
If you can find such a thing. I really doubt that exists since USB is a data connector not a video connector.
would allow me to run the audio through my stereo.
That would depend on this adapter. -
My I phone has plenty of storage but will not download any apps free or paid for when I press install the installation symbol appears briefly and then the page reverts to the original form with the price or free on the right hand side.
Call 1-800-275-2273...ask to talk to "Customer Relations"...no one else.
Good luck. -
My Itunes info will load onto Apple TV, but will only play one song at a time of my music. Home sharing is on, airplay is on, router info has been reset. What am I missing? It has never done this before....
My Itunes info will load onto Apple TV, but will only play one song at a time of my music. Home sharing is on, airplay is on, router info has been reset. What am I missing? It has never done this before....
-
Trying to down load mountain lion but will only get to 53.25mb
trying to down load mountain lion but will only get to 53.25mb
See if this applies:
Apple has tightened its requirements for this OS upgrade, and some older Macs— even ones that qualified for Lion — won't make the cut for Mountain Lion.
The general system requirements are straightforward:
OS X v10.6.8 or later
2GB of memory
8GB of available space
Apple also lists which models WILL support Mountain Lion:
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
Xserve (Early 2009)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
Hope this helps -
please help - installed IOS7 and now I am having problems playing Words Free on my Iphone. It gives me a pop up telling me to connect to ITunes but will not connect. Cannot get out and have to continually shut down my phone and start over.
Hi, jeantwin.
Thank you for visiting Apple Support Communities.
The steps in the article below may help you resolve the issue with push notifications.
iPad and iPod touch: Unable to use YouTube or Push notifications
http://support.apple.com/kb/ts3305
If the issue persists, try signing out of your Apple ID and then sign back in.
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/HT1311
Cheers,
Jason H. -
I just created a new profile/user on my MacBook Pro. My pointer/mouse on my trackpad. It works fine in my older user profile, but when I go to the new profile my mac will not respond to clicks. The Mouse moves but will not click. Already tried restarting and the pram zap. The problem starts when I log out of my main profile. I get to the login screen and my laptop stops responding to clicks. When I manage to make my way back to my main profile the mouse works perfectly. Should I just delete the new profile and try again?
If the modem is also a router, either use the modem in bridge and run pppoe client on the TC.. that is assuming ADSL or similar eg vdsl. If it is cable service.. and the modem is a router, then bridge the TC.. go to internet page and select connect by ethernet and below that set connection sharing to bridge.
Please tell us more about the modem if the above gives you issues. -
How to show ipad application in itunes, but will only be assessable to owners, not the general public by using lock code/password protected on iTunes
So if I understand you properly, I need to create EOs for all my list of values (which are based on views of Oracle apps tables) and base my VO on those EOs. And then I setup associations between these EOs and the Item EO. Then I include the these EOs in my Items VO and add the description attributes to my list of attributes. I had done this for the list of users, but for the views of Oracle I had just created read only VO. Sounds like that won't work if I want to display the description. I know what to do - I guess I was hoping there was a way to use the read only VO.
Thanks
Karen -
ipod touch will not connect to itunes @ work computer, but will connect to itunes @ home computer? why won't itunes see my ipod at work?
Try here:
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
Mac OS X v10.6 or later: iOS device not recognized in iTunes after restart
Maybe you are looking for
-
I was listening to my mini and changing songs when it froze up. Well, I usually just go ahead and reset it but the last time I did, it erased everything, like if you was to reset the settings in the menu. Now, it will not connect o my computer. It sa
-
I'm creating a program that is supposed to have a circle and a line disappear when mouse button is pressed, than when mouse button is released, reappear. My program is below, but I do not have a clue why it won't do anything when the mouse button is
-
Digital Raising Edge using cfp-300
Hi, Raising Pulse / Positive Pulse and Falling Pulse/ Negative Pulse. I put this dummy question different time in different ways but still there is no answer. I am using cFP-300 (Digital input module). As in other PLC programming softwares there are
-
Insert Stmt behaving differently within a PL/SQL block than independently
I have an INSERT INTO statement that is behaving different within a PL/SQL block than it does if ran as an independent SQL query. When executed within a PL/SQL block the INSERT statement does insert rows, but only less than 50% of the rows returned b
-
How to get UIComponent of the selected node in af:tree with drag and drop
Hi Are there examples showing how one could get a UIComponent using DropEvent to be used with a Popup showing as a custom "context menu" at the target node ? Right now, with dropEvent.getDropComponent, we could only get the tree. We like to get its s