DVD Player Issues- Possible Hardware/Driver malfunction...

Hi folks:
I've had my eMac for about three years and have been happily running 10.2.8 for the past two.
Just tonight I had a new issue when I tried to play a DVD; I put the disk in the tray, heard the disc spinning in the drive once it had closed, and then... nothing. No DVD Player launch, no Disc appearing on the desktop. In fact, so much nothing that the Eject button on my keyboard failed to cause the drive to open, as did the Eject command in the Finder and in the DVD Player (which I opened manually).
The only thing that got the disc out was to open iTunes, which I had been using to load CDs earlier this afternoon, and to use the Eject command from within the program. This happened with two clean rental DVDs one after the other. I restarted the computer in between, and have tried inserting Audio CDs, with the same effect each time.
Most troubling is that the last few times I have ejected the discs from inside iTunes I have received a window telling me that my Home drive requires me to enter a pass phrase to execute the command.
I am completely lost. Any ideas?
Gracias,
Jason

hi jason--
i would do a couple of things here. first of all i would go to disk utility in utilities, select the macintosh hd, and then click on repair disk permissions. then boot to open firmware by holding apple-option-o-f during startup until you get a screen that says "to continue booting". then type in the following commands--
reset-nvram (hit return)
set-defaults (hit return)
reset-all (hit return)
the last command restarts the computer. by the way, if a disk is stuck it can often be ejected by restarting and holding down the mouse or the eject key on the keyboard during the boot. if that fails, do the open firmware boot described above, except type in these commands--
eject cd (hit return)
mac-boot (hit return)
let me know if this makes any difference. [ 8 ) ]

Similar Messages

Third party DVD player issues

Recently, I have come across an issue playing back DVD's with
VLC or XBMC. When I start playback of the DVD, it plays the first
segment ( the studio leader at the beginning) and will then just quit.
Apple's DVD Player works fine (quality is crappy and can't get surround
tracks out of it). Yet, when the DVD is ripped to the hard drive and
played from there, it is works just fine.
Also, this happens when the DVD is played back from an internal
or external drive.
Has anyone else seen this issue or do I have a unique problem?

My unit is a 2010 MacMini with HDMI. (see list)
The quality issues with Apple DVD player vs. other solutions are certain
scenes have a graininess akin to noise on old analog tv's that aren't
present on the other players and severe banding in gradients that
do not appear in other players, at least when they were working.
As far as the audio, selection in the DVD's menu itself just makes no difference.
Tried all the combinations of messing with Audio MIDI setup, third party
plugins like Perian, none of which work for Apple's DVD player. This was
the other reason for going to third party players, the higher quality video
was just a bonus.
Your point has been taken that it may be a software issue with the third party players.
Some update at some point may have broken them, be it OSX or their own.
I've beaten the Apple DVD player issue enough, let's just consider the topic dead.
The audio issues with it are spread over many, many threads across the web, with
no silver bullet solution to all.
As for BluRays, play them back all the time on my Mini. Either with
PowerDVD 10 in a Bootcamp windows7 when I want full DTS-HD or
TRUE HD decoding (decodes these to up to 24 bit,192kHz 7.1 since the
Mini chipset does not have the "protected" path for pass through of
these technologies) or a MakeMKV/XBMC combo in OSX. The OSX
solution doesn't give you the fancy menus and all or HD audio if present,
but if I only want to watch the movies it's fine. If I ever do want the other
nonsense, I just use PowerDVD 10. And please note this is BluRay disk
in player, not "ripped" or transcoded.
I do appreciate your help, but was primarily curious if others had issue
as well.
Message was edited by: woodmeister50
Message was edited by: woodmeister50

QS 933, Leopard DVD Player, "no suitable hardware error"--???

As a trial,I put Leopard 10.5.3 on a 60GB HD
to put intomy media Center to see how it would perform.
(My media Center also has a ATI Radeon Pro PCI 9200 card,
and the stock Radeon 7000 AGP card installed).
When I launch DVD Player on the drive, it gives me the
"No Suitable hardware found"error,and I can only close the program.
I know I don't have a DVD Drive installed,but shouldn't
DVD Player work even without one?
I'm trying to see if it can, as VLC has issues ( stuttering playback) with
playing back Video_TS folders on my QS.

Same problem with you. Now that I have a DVD to play neither FrontRow nor iDVD.
My opinion as a retired computer scientist is that apple has shipped defective software. The mouse doesn't work in Frontrow. The arrow keys will allow me to navigate but will not bring up the last item, DVD type, when i hit enter or return.I thought iDVD was a player but I'm dealing with copyrighted material and i do not want to rip off the author, an MD Ph.d pioneer in many fields.
--gwm

Another dvd player issue - error 70017

I accidentally posted this in the pre-2009 forum - so I am posting here to correct -sorry for the duplicate post.
Mac Mini early 2009 - 2.0ghz, 3gb ram, 10.6.2.
I am having a regular problem with the dvd player; I usually get the message "There was an initialization error. A valid video device could not be found for playback. Error 70017" when I start the program.
The DVD drive works wonderfully for reading, burning, etc. If I restart the computer the dvd player usually works for watching movies...if I use Toast, disk utility, or any other dvd related program, the player will now work again. I have tried the pacifist method to reinstall and have deleted every dvd player file I can find.... The same happens when I reset pram. Repairing the drive/repairing permissions is not effective either - sometimes it works for a little while, but the issue always returns.
Any advice? Doesn't seem to be hardware because it works for other programs, but I'd be glad to test that as well.
What's going on here? This is frustrating...I can use any number of other programs to watch movies, but it sure is nice to be able to use dvd player to see which title is playing, etc...plus I just want it to work - after all, isn't that the hook?
Thanks for any advice!

Two things, have you run the Hardware Test on your Install DVD? Have you tried resetting the Systems Management Controller?
Dah•veed

HT2499 My DVD player has stopped taking discs and the DVD player no longer recognizes the drive. I bought an external player. How do I switch the DVD player from the internal drive to the external?

My DVD Player in my MabBook Pro, System 10.8.2, has stopped accepting discs and is no longer recognized by the DVD driver. I purchased an external Blue-ray Disc player/writer. It is a Samsung. I downloaded their driver so the drive shows up on my desktop. But how do I switch the DVD player over from my internal to my external drive?

In addition to RRFS's advice, please post in the correct forum. This forum is for iMac's, you mentioned you have a MacBook Pro. They're similar but still pretty different hardware.

Encore DVD Writing Cancels won't play on DVD player issue

So I have a very confusing issue with encore.
When I press build everything works fine. Then writing begins. The moment the writing reaches the end of the progress bar (the exact moment) the progress bar goes to empty and the bottom bar says canceling and ejects the DVD. Usually (not every time) a pop up menu saying "end of file" appears next. When I press ok for end of file message the pop up disappears and suddenly the DVD progress bar is filled and the DVD says completed (as if nothing just happened). So I'm confused whether it worked or not!
I reinsert the DVD that just ejected into my Mac and it works! Then I put it into a DVD player and it won't play, it won't play on my old Xbox 360 either, but it WILL play in a Bluray player?!
Everytime I rewrite the files I get different results. They all work on my Mac and blu ray but only 1 of 4 works in the Xbox. The one that does work in the Xbox will read in the DVD player but plays choppy and skips around as if the DVD is scratched or damaged?
! Other differences involve the write speed, sometimes the options are 8x or 4x. Other times its 3x,2x, and 1x. When the latter write speed options occur I cannot press "test before writing" it's greyed out. When 8x and 4x are the speed options I can check it. I used different DVDs and it didn't help.
I work for a company that needs to copy the DVDs but they can't be copied. Don't know why?
Here are my settings
Mpeg 2-DVD exported from Pr.
720x480
Codecs: Mpeg video, Mpeg layer
Duration: 1:10:26
Encore DVD transcode status: Don't Transcode
Encore Project/assets
2 Menus
1 Mpeg video
1 Timeline
Build
Format: DVD
Output: DVD disc
Source: Create Using current project
4.7 gb disc
Has 510mb free
All regions
Unlimited copies
First Play and title button are a menu
Check build is good.
I really need help with this weird issue quickly thanks.

Just an Update, I've tried many things to no avail still have a few others to try. Being a Large file it takes a while to try things.
I went ahead and got Toast, but considering that the Image Iso and the DVD Folder both gave me the End of File Error and the Disc "Failed Completed" Error I figured it a no go and it was. It did however give me something that Opened everywhere (Mac,Xbox,Dvd) , but it did not play on the Dvd correctly.
I've done numerous things in the Mac permissions end Like trying as a different user and running as the Root User, but it was also unsuccessful.
I've Re- Exported the file many different ways, but finally had a breakthrough using a version of M2v. It's definitely an error with Finalizing. My disc previously began to mess up and give "END of File" after it finished writing, it never even made it to the "Writing Lead Out" stage. I beleive this is why it plays it certain places fine, but probably not as well in systems (like Dvd players) that require those last few steps like writing Lead Out.
The only issue I have now is that when I put it into the DVD player it say "No title"!?!? AY CARAMBA!!!
Now I'm working on trying to figure this NEW problem! I have all my menus and links in place, but no go. I think it may be related to the previous problem in that something beneath the surface is wrong with my computer. Being a used Mac with a restored Hard Drive there are probably endless possibilities, but I hesitate to think that way because it may also have absolutely nothing to do with it.
So any help is greatly appreciated
whether it be a specific issue you know of dealing with used Macs and issue similar to mine
or just on the "NO Title" error as a separate issue. I'm hoping this "No Title" is something simple and unrelated, I've already burned through about 13 discs and even more pain pills for the headaches!!

DVD Player Issue

If I do a hard factory reset on my MacBook Pro, does anyone think it will fix the issue of my DVD player not working?

Information.
CD/DVD Loading Problems
CD/DVD Drive - Troubleshooting
CD/DVD Drive - Troubleshooting (2)

Odd DVD player issues

Most of the time, my DVD player works without a glitch. But for some reason, on certain DVDs (eg anything Doctor Who- Other BBC discs are fine, though), it plays the introductory messages/any trailers, but where it would normally go to the menu screen, it just stops. As though there's no DVD at all. If I keep hitting play, it complains about an 'Unexpected Error' and quits.
That's all the information I can give, and I've tried everything I can think of, but I'm no tech-genius.
Any input would be muchly appreciated

I think it may be the disks themselves, maybe the format? if they work on a normal dvd player, try them on a normal pc, then try on your mac again, it if works on your dvd player and pc then it may be your cd/dvd drive. chuck in your install disk and run a diagnostic on your mac (if the install disk glitches then you know it's not the disks.)
Also, it could be your graphics/video card stuffing around, but the diagnostic should pick it up. Run a software update and see if it has anything knew like drivers and stuff.
Hope this helps, this is all I can think of that could be wrong.

Anybody have DVD Player issues after 10.7.3 upgrade?

Aloha everyone,
I upgraded both my iMac and MacBook Pro to 10.7.3 (I used the combo updater) like any dutiful Apple customer, as I've never had an issue with an upgrade (I made the switch in 2006, so I don't have that much history here). I didn't notice this at first, but I have several DVD rips whose icons now appear to be a generic file icon. Furthermore, when I double-click on them, instead of DVD Player opening both the control window and the viewer window, only the control window opens. When I press the play button on the control window, I get the system error beep. I can not play the DVD file even when I then choose File ... Open from DVD Player's menu. I can use VLC to play the DVDs, but I would rather use DVD Player (just my preference).
I was wondering if anyone else has experienced this issue since upgrading to 10.7.3. This is pretty annoying, especially considering that DVD Player is an Apple app. Oh, and I use Ripit for my DVD rips. After purchasing a DVD, I would rather just rip it and play the rip than take a chance on damaging the original DVD.
Thanks in advance for any and all responses

FCS 3 is working as usual for me, although FCP did re-profile the RT Extreme settings and took a couple of seconds longer to start up the first time after updating. What else have you installed or updated?
I was also on the 10.7.3 beta. It did not change anything in the behaviour of FCS 3 there either.

CD/DVD player issue

Hello there,
my CD/DVD player of my HP G60-428CA, windows7 is not working. It show under computer but when i insert a cd it does not read. when i double click on it from computer, it say<< insert a disc into drive (E) even though there is a CD in it. I have changed several good working cd but still same.
please help
thanks

Hi,
Open windows Control Panel, open Device Manager, expand DVD/CD-ROM Drives, right click the drive and select Properties - on the General tab, is there an error code showing in the Device status box?
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

DVD Player Issues

I am having trouble playing DVD's, when I pop in the disc and the film begins you can see maybe 30 or 40 blue pixels or artifacts. However when playing a video I made or an internet video no problems. I have yet to try to copy the DVD to the HDD and play from there or maybe with VLC. Has anyone else had these problems? I just got this MacBook maybe 4 days ago, just tried the dvd player.

Hello there. Where do you see the pixels, ie. are they always in the same place, or do they change places? Also, does this happen with every DVD you try to play or just a particular one?
Also, how much RAM is in your machine?
Artificacting can be caused by a couple of things... it could be a slow machine, resulting in frames dropped. It could be a machine with insufficient RAM and too many other applications running concurrently, again resulting in dropped frames that show as artifacts during the decompression and playback.
It could be a dirty or damaged DVD. It could be dirt on the read head of the drive as well. Or it could be a defective drive.
Skip

Display issue or DVD player issue?

I have a project which is aspected 16 x 9.
When it plays on one DVD player it forces it to 4 x 3 and displays it as letterbox and nothing is squashed or stretched. No problem.
On another DVD player (playing on a 4 x 3 monitor) it plays the 16 x 9 DVD as a stretched out 4 x 3.
Is this likely a DVD player setting? My client is freaking out and wants answers. Thanks in advance for your help.

If you have all your settings right (16:9 letterbox) then that is all you can do. DVD players can be set to override your settings and force the video to be 4:3, and there isn't a thing (as the DVD programmer) you can do about it.

DVD player says "no valid driver could be found" will not eject dvd...help

I put in a dvd and suddenly i am getting a dvd error that reads...
"There was an initialization error. A valid dvd driver could not be found. [-70012]"
I have checked for drivers to install or update but nothing works.
Help please...

I've encountered exactly the same problem on a Macbook which started occurring on just about the same date, right after an Apple update (to iTunes, Quicktime, Security, none of which I'd think would actually have any effect). I've tried holding the trackpad button while restarting, resetting PRAM and SMC (see http://docs.info.apple.com/article.html?artnum=88275). The ATA drive doesn't show up in System Profiler.

DVD wont play on DVD player after new super drive installed

I fried my burner and Apple put a new one in for me but now the movies I burn wont play on my DVD burners. Same media I've always had good fortune with. Works with my cheapy Acer but not the Pioneer. I need to send masters off for duplication and am not sure they will work with dups equiptment.
Is this a setting somewhere or is there a work around?
I have v 7.02 iDVD.
Thanks for any help
Leslie

Hi
Memorex - not good reputation here.
*Not knowing the origin to Your problem - General approach when in trouble is as follows:*
• Free space on internal (start-up) hard disk if it is less than 10Gb should rather have 25Gb
• Hard disk is untidy: Repair Permissions, Repair Hard disk (Apple Disc Util tool)
• Delete iDVD pref file - *or rather start a new user/account* - log into this and re-try
• Program miss-match: iDVD 5.0.2, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK - DON’T work under Leopard
• Program miss-match: iDVD 6.0.4, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK (might work under Leopard)
• Program miss-match: iDVD’08 v. 7.0.1, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK (might work under Leopard)
• iDVD (08) v7 Locate theme folder. Move out iDVD1, iDVD 2 and eventually iDVD4 folders to desktop - re-try
• iDVD 6.0.4 and iDVD 7.0.1 are compatible with Mac OS X 10.5 Leopard
Running a cleaning CD/DVD from time to time can help
iDVD pref file resides: Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences
and is named: com.apple.iDVD.plist
While iDVD is NOT RUNNING - move this file out to desk-top.
Now restart iDVD.
Yours Bengt W

Powerware 5110 and DVD Player issues.

I have a Powerware 5110 700VA UPS. I bought this because my area has lots of blackouts and so on.
I have found that I cannot burn a CD from iTunes if my iMac is plugged into the UPS. It spins, starts to burn, does nothing and then ejects the CD with an error saying something or other.
When I plug my iMac into the normal wall socket, it runs fine. It seems that the UPS is not providing enough power or maybe an increase in power for my Mac.
I also have not been able to install the LanManagement package for Unix (Mac) due to some questions. It might relate to this. My question is more of the power one though.
Any ideas.

Both. Power and USB as it is supposed to be the controller. But that's my other question. I'm hoping the installation problem may solve this. At least I'd be able to tell what is happeing powerwise.

DVD Player Issues- Possible Hardware/Driver malfunction...

Similar Messages

Maybe you are looking for