DVD player plays audio CD's and DVD but no sound from DVD

Hi All,
I have an Asus DRW608P with the latest firmware and a TDK CDRW4800B (CDROM) The Asus plays audio CD's but if I play a DVD there is no audio using Windows media player. I have a Sound Blaster Audigy 2 sound card (latest driver)and I am using the analog direct to my logitech 5500's. Any ideas? Possibly a jumper or cabling issue?
The Asus is using the Analog CD audio cable to the Audigy and the CDRom is using the digital audio cable. Both dri'ves are set to master. Should one be the slave or does it matter? Any ideas?
Thanks!!
J.

I'm having the same problem. I can play the video part of a DVD but no sound. Audio CDs and Windows sounds work fine. Does this mean I'm missing a DVD codec or is there a software setting I'm missing. The Nvidia codec costs money. Is there a free codec that will fix this? This is with Windows XP and Audigy 2 LS.
cruzmisl wrote:
Ok I figured it out. I downloaded the Nvidia codec and it works fine. Shouldn't all the sw be aailable with the soundcard though? I really don't want to pay $40 for a codec I do not have the spdif bypass selected.....
Any ideas?
Thanks,
J.

Similar Messages

I am using iMac OS 10.7.2 with Garageband'11 6.0.4. I can't record sound from mixer Behringer X1622USB using USB out. when I connect the mixer to iMac via USB appears USB Audio CODEC on Sound and preferences but no sound from mixer to iMac. Need help.

I am using iMac OS 10.7.2 with Garageband'11 6.0.4. I can't record sound from mixer Behringer X1622USB using USB out. when I connect the mixer to iMac via USB appears USB Audio CODEC on Sound and Preferences but I can't get no sound from mixer to iMac only sound from iMac to mixer. I only can record sound using microphone line in. Please help.

Eric,
Thanks for your reply. Realtek audio works only in playback. There is a stereo mix in the mixer but the recording controls are not operable with no sliders in the mixer for any recording option. Slider controls appear to be grayed out. Can't figure out how to enable them. Downloaded newest drivers to no avail.
The M Audio control panel has no apparent option for recording stereo mix. Adobe ignores the sound from the DVD or CD and shows flatline.
I'm trying to record the sound from the DVD not rip the track.
When I go to Audio Driver Setup and select Audition 3.0 windows sound, there is no input device installed.
I'm thinking of going back to a decent internal Soundblaster card like I have on my 8 year old machine I am replacing.

2010 iMac 2.93 i7 27" or 2011 2.8 i7 21.5" - which will suit better long-term? I do a fair amount of audio, video editing and photoshop, but I have a limited budget. What's going to give the best bang-for-buck for the next 3-5 yrs?

I do a fair amount of audio, video editing and photoshop, but I have a limited budget. What's going to give the best bang-for-buck for the next 3-5 yrs? My current machine is a 13" Macbook unibody 2.4 Core 2 Duo w/ 4Gb Ram so it's time to move forward with more power and screen real estate!

Hello, Jeff
I could never edit on a 13" screen. I'm currently using a 17" MBP i7 Early 2011 as a fast replacement to my aged 20" Intel iMac.
Both systems are not that far apart on stats and you will find that processing HD video will rely highly on the read/write to your storage. Myself, I'd be eye balling the 2011 for the Thunderbolt port so HD Video export/compression doesn't take forever! Currently processing a finished HD project for DVD uses at most 20% of my total CPU capacity. The FW800 drive is the big bottleneck! (I know I need at least a RAID to see a real speed boost).
How good your eyes are and your usage style would dictate if the difference in screen size make a difference to you.

Mpeg4s I create and upload to Internet play fine on Mac and PCs, but not on iPad or iPhone. Does anyone know how to get them to play on iPads/iPhones?

mpeg4s I create and upload to Internet play fine on Mac and PCs, but not on iPad or iPhone. Does anyone know how to get them to play on iPads/iPhones?

You have to make sure they are fully compatible with iPad
Video formats supported:
H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format

I have problem with playing stream fullscreen. it goes black but with sound

i have problem with playing stream fullscreen. it goes black but with sound. i have to wait 10-15 minutes then i can press fullscreen. what to do?
s

Thanks!! but i been fixing now for 10 minute ago by restart my macbook pro. My case is it show normal with Intenal-speakers and nothing mark with red light or mult so i tried to restart that it working again

No sound when playing Audio-Cd's and burned movies

I recently bought a MSI DR-8A and it is working just fine, except when I want to play a burned DVD-movie or an Audio CD I don't have any sound
When I insert a original DVD, no problem whatsoever. What can this be??????

Hi Cave,
LOL. No, when i asked about the power supply, i was asking about the brand, the power rating (250W, 400W...) and especially the different amps ratings on the different rails
ex: 3.3V: 20A, 5V 18A, 12V 25A.
all those data should be on the power supply label (inside the case, though).
Power deficeincies can lead to really strange problems (but i dont think it is the cause here).
As for your problem, i'm kinda stumped. I asked about all i can think about and i still cant see a solution (more like i cant locate the problem)
summary:
DVD:
- disc is correct as it reads in another player.
- sound is correct, as pressed DVDs play correctly
- I'm not familiar with what you mean by Audio TS format.
CDs:
- play in the CDRW burner (so, good media)
- digital audio enabled on DVDRW drive
- correct sound properties (no mute or low volume)
- tried different softwares? (winamp, WMP6/7/8/9, DVD player...)
Does anyone see a problem/solution?

SWF plays fine on PC and iMac but not on MacBook?

I have created an swf file in Flash professional. It plays perfectly on a PC and on an iMac.
Unfortunately for some reason it has white horizontal flicker lines that flash up every now and then on the moving text when the swf file is played on my macbook and other friends have tested it on their macbooks and macbook pros and they too experience the problem.
I installed google chrome and it doesn't flicker as much as it does in safari and firefox.
A friend told me to convert my SWF file to html5... I didn't have much time to find out why as my friend is very busy but I did it and found the the animation now plays perfectly in google chrome on my MacBook but still not great in safari and firefox.
I'm guessing the problem is with the macbooks and not my animation if it plays find on a PC and iMac. But why is this happening?
I created the flash animation with ActionScript 3, Flash Player 10. Basically I used the default settings.
Could there be a conflict with the ActionScript or flash player I have made it with against my browsers?
I'm no tech wizard so don't know what I'm doing. All I do know is that I have a grumpy client with an unfinished animation so I'd love some help from someone.

Many thanks, kglad.
A couple of follow-up questions, if I may...
1. How do I let flash publish my html?
2. How can I get http://www.e-tutoringonline.org/file.php/1/info.txt to load?
Cheers,
David

Rendered clips play in After Effects and Premier, but not in Speedgrade

Hi,
I am very new to the world of Speedgrade, and have started running some tests, but hit a brick wall right at the get go. I have an After Effects project, that has a few layers, some are filmed footage, some are photoshop images etc. there are also a few plugins used (Lens Flare, Particulare etc). I render this comp out to two outputs, 1 - Quicktime JPEG2000 Intermediate (Highest quality settings) and 2 - Quicktime DNxHD Proxy (Lowest quality settings). I can import and play bot these exports in After effects and Premier, but when I take them to Speedgrade, I dont get playback.
Here are screenshots:
After Effects footage settings:
Visual of the smoke in After Effects of the imported render:
The same file imported into sSpeedGrade:
Is this something that can easily be explained?
Any advice would be appreciated.
Pierre Devereux

Hi Joost,
Thjank you for your feedback. I have submitted a bug-report as you suggested. I will find another workaround for now, probably doing most needed colour work in After Effects directly for now.
Thank you
PIerre Devereux

How to fix streaming audio pops/crackles and then stops all sound

I am a google Chrome user. I am unsure if this problem is related to Chrome or to Flash by I suspect there is a problem with both. I previously had this problem where when you start a youtube video for example the audio would pop/crack and then the audio would go dead. If you were able to put the video on full screen before this happened it would work fine. This really only happens with windowed (non-fullscreen videos). Previously I went in to my chrome plugins and disabled chrome's native flash and that fixed the issue. With the most recent update to Chrome this has happened again. This time disabling chrome's flash does not work. On the adobe version site it says that for chrome the version should be 11.5.31.137 but it shows me as using 11.5.502.146. The latter would be the version for firefox. I do not use firefox. Could this be causing my trouble? I have used the official flash uninstaller and restarted my computer and reinstalled but the same thing happened. Thanks.

Thanks for the link. I have tried what they recommend. I currently have two flash files. I have disabled the chrome one and the one that is enabled is C:\Windows\system32\Macromed\Flash\NPSWF32_11_5_502_146.dll
However, I ran the chrome://flash and this is what I got:
Flash plugin
11,5,502,146 C:\Windows\system32\Macromed\Flash\NPSWF32_11_5_502_146.dll (not used)
--- Crash data ---
Crash Reporting
Enable crash reporting to see crash IDs
For more details
https://support.google.com/chrome/?p=ui_usagestat
--- GPU information ---
Graphics card
ATI Radeon HD 4800 Series
Driver display name
aticfx32.dll,aticfx32.dll,aticfx32.dll,atiumdag.dll,atidxx32.dll,atiumdva.cap
Graphics card
ATI Radeon HD 4800 Series
Driver display name
aticfx32.dll,aticfx32.dll,aticfx32.dll,atiumdag.dll,atidxx32.dll,atiumdva.cap
--- GPU driver, more information ---
Vendor Id
0x1002
Device Id
0x9460
Driver vendor
Advanced Micro Devices, Inc.
Driver version
8.970.100.3000
Driver date
7-3-2012
Pixel shader version
3.0
Vertex shader version
3.0
GL version
GL_VENDOR
GL_RENDERER
GL_VERSION
GL_EXTENSIONS
I've never looked at this before but it is weird that it is saying that that flash is not used.
Anyone know about the firefox version of flash installing for Chrome because as I described above that doesn't seem right.

USB Recording Audio Interface levels are visible but no sound.

I have a Focusrite Scarlett 2i2 2 In/2 Out USB Recording Audio Interface hooked up to my iMac via USB cable.
On the System Preserences Sound Page, the computer recognizes the device and levels are visible.
But there is no sound coming out of my internal speakers/headphones.
I tried recording some music and it recorded fine and played back fine, I'm just unable to monitor the sound as it's coming in.
I've also tried a completely different device with the same outcome.

No, you have every business being here as any help is greatly appreciated.
When you say "core audio" what are you referring to?
Ok, here's what I see in the system preferences->sound window:
Output is set to Internal Speakers
Input is set to my device, the Scarlett 2i2 USB
When I play sound thru the device I can see levels where it says 'Input level'.
Now here's the MIDI setup->audio devices window:
Input is set to Scralett 2i2 USB (hightlighted in the left window with a microphone icon next to it).
just below that it reads 2 in/ 2 out
Output is set to Built-In Output (hightlighted in the left window with a dual smling face box icon and a speaker icon next to it).
just below that it reads 0 in/ 2 out
On the right is the Ch/Volume/Value/dB/Mute wondow
Master volume slider is in Light Grey and un-slidable
1 and 2 are Dark Grey and slidable.
That's pretty much it, sound comes in fine yet no sound from interal speakers.
Now I feel a crying spell coming on. Excuse me. Weep weep weep........

IPod touch audio issue: why do I only get sound from one channel in my ear-pods?

After upgrading my brand new iPod touch 5th generation to IOS 6.1.2 I only get sound from the right channel of my ear-pods.
I did not have this issue with IOS 6.1.1. Is this a problem derived from new IOS? Any idea on how to solve it?
Appreciate your help!

Have you tried other headphones? If you confirmned it is an iPod problem:
- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit

HT6154 My volume button is not working and I have no sound from my iphone4s

My volume button does not work and I have no sounds on my iphone4s ever since I downloaded ios8....maybe coincidence...

Maybe.....

TEXT SOUND STOPS WORKING AND SO DOES ANY SOUND FROM VIDEOS

My texting sound, button clicking and any sound from videos does not work. Is anyone else having that problem. I have had it back to the sprint store 4 times.

The sound on/off button is on, the sound settings are set to ring and not vibrate but the sound will not work. It will ring for incoming phone calls but for nothing else. No video, no text sound, no click while typing, etc. The phone has been reset to factory default 3 times. Apparently, I have a apple phone that is a lemon........

7921G and absence of a sound from speaker.

Hi.
No sound from "ear's speaker". There is sound only when I switch on backside loudspeaker.
It is not hardware problem - two devices behave equally.
7906 works fine.
Test enviroment with CUCM 7.0.2 and basic default configuration.
What's wrong?

If it works when in speakerphone mode but not in handset mode, then definitely appears to be a hardware issue.
When you are in handset mode, does it show an icon that there is a headset plugged in?

Plays fine in IMOVIE and IDVD but disk doesn't play right in home DVD Playe

I created a movie in IMovie and it plays fine there. I converted it to IDVD and it plays fine there, but when I burn the actual DVD, it takes 12 hours! and then it won't play on my home DVD player. (It starts out fine, shows the menu and has the movie, but halfway through it freezes. Or if I try to fast forward to skip to the next chapter it freezes.
I tried upgrading my Superdrive to the new Pioneer 111D (it was suggested to me that my older 103 was not compatible with Panther) and still the same problem.
I am noticing now that when I go to check my system profiler, it's now saying for the new Pioneer 111D that "disc burning is NOT supported".
I'm in the midst of a project and feeling pretty screwed. HELP!

First of all, I'm appreciating all the responses and help. This is a serious concern for me which I need to find a solution for asap.
As far as the media itself... the discs are TDK DVD- and I've ruined about 4 or 5 of them... each having the same problem...taking 12 hours to burn they play for awhile on a commercial DVD player then freezes up about 2/3rds the way through (unless you try to scan through, in which case it freezes up on the spot.) There are a total of 3 scenes... and the 3rd scene doesn't happen at all in the final burned disc. So, J.Keller, as much as I'd love to blame the media I don't think I can. But it's certainly a reasonable explanation.
Karsten, I have to tell you the thought that it might actually take LONGER to butn this disc is painful. It's actually only 45 minutes or so of material. But if I knew that it would take 24 hours but it would work perfectly I'd go for it! I will download the patch you recommend to see if it offers a workaround solution.
But I'm still perplexed that in the SYSTEM PROFILER for the Pioneer 111D it says that "burning is NOT supported". Should I be concerned about this?
At this point I'll try just about anything. So if J Keller thinks that by waving a dead chicken over my head while singing dixie would help create a workable DVD so I can finish this project for my boss, I'd give it a try.
Any other thoughts? I really appreciating the insights and suggestions.

DVD player plays audio CD's and DVD but no sound from DVD

Similar Messages

Maybe you are looking for