DVD Player rejects clean burned DVD on Mac Pro, G5 and G4
I have a disc from a colleague, standard NTSC which displays the following once the menu screen appears (and hangs afterwards immediately):
"DVD Player encountered an error it could not recover from. There was an error reading from disc. It might be scratched or dirty. [-36]"
Has anyone else encountered this with clean media? Thanks.
HI Ken,
Repair disk permissions.
Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
Carolyn
Similar Messages
-
I have had my mac book pro for about a year and a half and suddenly my dvd player will not play DVDs and i can not play alot of things on full screen. Does anybody know how i can fix this?
This could be several things, but let's get the obvious ones out of the way, first:
1. Judging from your text, there's no problem with anything stuck in the mechanism; it's more an issue of no being to put in a disk. In other words, you're sure that there isn't a disk stuck in your MBP. (That happens a lot for all computers.)
2. Go to Applications/Utilities/Disk Utility, and repair the disk. This should take under 10 minutes.
3. Perform the procedure outlined here:
http://forums.macrumors.com/showthread.php?
4. After you're done, leave a message here as to the status of the repair. -
IMac no longer recognizes my DVD player after upgrading to DVD Player 4.6
Hi,
Several days ago I upgraded to Tiger and then 2 days ago, through "software update" I upgraded to 10.4.3 and also upgraded to DVD Player 4.6
I just discovered that my computer no longer sees the DVD player and an inserted DVD doesn't show up anywhere (when I check under "Hardware" and then "Disc Burning" under "About This Mac" it says "No burning device was found."
I tried reinstalling the upgrade (DVD Player 4.6) but it says it can't because there's no valid DVD player in the system (my computer has a Superdrive and I've played and burned DVD's a plenty in the past several months).
Any help/info will be GREATLY appreciated!!
-StephenHi sjberg!
Welcome
Will this update help you?
DVD Playback Update 4.6.1 addresses a disc validation issue some users may encounter when attempting to play a disc for the first time with DVD Player 4.6. This update is recommended for all users of DVD Player 4.6.
http://www.versiontracker.com/dyn/moreinfo/macosx/12701
Sue -
I have an IMAC (OS X 10.7.5) and the DVD player will not accept DVD's. As they are inserted, they are immediately ejected. How do I fix this?
try resetting the System Management Controller (SMC).
-
Will PAL dvd player play my NTSC DVD-r?
I'm trying to figure out if I need to convert several NTSC dvd's into PAL format to send to a friend's mom in Israel (she's very sick and would like to see these soon).
Since I've never converted between these formats, I've been doing lots of research and keep getting more confused. I downloaded JES Deinterlacer (i think thats what its called) but I'm not sure I need it since I read the following on an imovie FAQ website:
"I have an NTSC project and want a PAL DVD.
The good news is: You can just send an NTSC disc. Any PAL set top DVD player capable of playing DVD-R discs can also play NTSC discs. All that is needed is a fairly new TV, built in the last 8-10 years or so."
Could this be true? Can I really just send the NTSC dvd's to her? I hate to waste time here...please help...
Thanks so much in advance.
JennyThat´s right; NTSC DVDs will always work on PAL players when the player is compliant to the DVD specs. Those players do give out the regular NTSC signal and/or convert to PAL60. Some players can even convert to PAL50. The problem is the TV set.
My German TV is 14 years old and cannot handle PAL60 or NTSC; I would need one of those rare players that convert to PAL50 (usually with poor results).
But NTSC DVDs will always work on a PC (when it is an all-region DVD). -
The metal flap over the dvd drive won't close on my Mac Pro
The metal flap over the dvd drive won't close on my Mac Pro.Very annoying,dust will kill.
Any ideas?Hi Toby,
See if one of these videos shows you how to get to it...
http://eshop.macsales.com/installvideos/macpro_2010_opt/
http://eshop.macsales.com/installvideos/macpro_2009_opt/ -
DVD Player Just stopped Playing DVDs
Just today, the DVD player has stopped playing DVDs on my ibook. I tried putting in a multitude of diferent DVDs, but I always got the same result: the disc image would not appear in the desktop, and the DVD player would open, as if it were in standby, but it would not play. Any idea as to what may have happened/how I could remedy this?
Hello,
Follow these steps and you should be on your way to watching your DVD's:
1) First, Quit DVD Player if open.
2) Eject your DVD.
2) Go to: Home > Library > Preferences.
3) Find the file called: com.apple.DVDPlayer.plist and move it to the trash.
4) Insert your DVD.
5) If necessary, launch DVD Player.
I hope this works!
-Jason
(If these steps do not work, reply back and I will try something else) -
My peripheral DVD player has an instructional DVD stuck in it. It says it is not supported. I cannot get it to eject
Tried the terminal method?
Application > Utilities > Terminal
Type in this command.
drutil eject external
Press enter.
Quit terminal. -
Lenovo IdeaCentre A720 - Clean Installation Windows 8.1 Pro x64 and Office 2013 x64
GUIDE: Clean Installation Windows 8.1 Pro x64 and Office 2013 x64
Note: for a good performance is recommended to use a SSD for Windows with a minimal of 128GB and use the HDD for Data
Driver up to date - Sep 2014
First you need to download and have ready the following softwares:
Classic Shell V4.1: To get back the Start Button like Windows 7
http://www.fosshub.com/Classic-Shell.html/ClassicShellSetup_4_1_0.exe
Broadcom BT for Windows 7 (64-bit) - to enable dongle, Windows 7 Live DVD and USB Drive.
http://download.lenovo.com/consumer/desktop/h1100174.exe
Realtek Cardreader Driver Windows 8.1 (64-bit) V6.2.9200.29070. To be able to use the card reader
http://download.lenovo.com/consumer/desktop/h1101061.exe
NV VGA Driver for Windows 8.1 (64-bit) V340.52. Latest video driver for NVIDIA video cards
http://www.nvidia.com/content/DriverDownload-March2009/confirmation.php?url=/Windows/340.52/340.52-n...
Lenovo Silver Silk Keyboard Driver for Windows 8.1 (64-bit) V1.05. To be able to see when Caps Lock or Number Lock is press
http://download.lenovo.com/consumer/desktop/h1100842.exe
Yuan MC907 TV Tuner Driver for Microsoft Windows 7 (64-bit) V6.14.10.416. To be able to use the Yuan TV card
http://download.lenovo.com/consumer/mobiles/tvt129w8164.exe
OSD APP for Windows 8.1 (64-bit) V1.1.06. To be able to use UP or Down Volume for Touch keys in the screen.
http://download.lenovo.com/consumer/desktop/h1100547.exe
Windows 8.1 x64 Installation DVD and Office 2013 x64
Follow this procedure for the installation:
Install Windows 8.1 Pro x64 using the general or personal key
Just to avoid install an old Video Driver from windows update, disable the Wi-Fi or Interned connection
Install Office 2013 x64
Install the Video Driver “340.52-notebook-win8-win7-64bit-international-whql.exe” just let the setup to uncompress the files in “C:\NVIDIA” folder, do not continue to avoid the installation of other software that you may never use. Go to “Device Manager” and Right click properties in the display adapter, press “Driver” - “Update Driver” select browse my computer and give the path “C:\NVIDIA” press next and close after installation finish
Enable Wi-Fi and open Control Panel – Programs – Turn Windows features on or off and select “.NET Framework 3.5” hit OK, after the installation finish, reboot PC
Install “ClassicShellSetup_4_1_0.exe” follow instruction and configure the way you may like
Run file “h1101061.exe”, unselect “Install Realtek Card Reader Driver” and press finish. Path for driver is "C:\EXEBuild\Realtek Card Reader Driver”. Go to “Device Manager” and Right click properties in the unknown devices, press “Driver” - “Update Driver” select browse my computer and give the path “C:\EXEBuild\Realtek Card Reader Driver” press next and close after installation finish
Install “h1100842.exe” backup driver location is “C:\EXEBuild\Lenovo Silver Silk Keyboard Driver” after installation is done, go to “C:\Program Files (x86)\Lenovo\Lenovo Silver Silk Wireless Keyboard” and Right Click in the file ‘”skd8861.exe” properties – compatibility – change setting for all users and select run compatibility mode for “Windows 7” press OK and OK
Run “tvt129w8164.exe” unselect “Install TV Tuner” and press finish. Path for driver is “C:\drivers\TV Tuner (Geniatech, Yuan, AverMedia)”. Go to “Device Manager” and Right click properties in the unknown devices, press “Driver” - “Update Driver” select browse my computer and give the path “C:\drivers\TV Tuner (Geniatech, Yuan, AverMedia)” press next and close after installation finish
Run “h1100547.exe” unselect “Install A7 OSD APP now” and press finish. Path for driver is “D:\EXEBuild\A7 OSD APP”. Run the file “setup.exe” do not reboot the PC and ensure the folder been created during the installation “C:\Program Files (x86)\Lenovo\Lenovo BrgVolOSD” with this two files “BrgVolOSD.exe” and “CD_DLL.dll”, if this fail go to next step, if not, avoid next step. Normally a successful installation of this file depend of “.NET framework 3.5”
Go to control panel and uninstall “Lenovo OSD”, run the previous “setup.exe” and during the process of the installation, be ready to make a copy for the temporal file name “setup.msi” created in “C:\Users\YOURUSERNAME\AppData\Local\Temp”, copy file “setup.msi” in “C:\” and run CMD in administrator mode and go to “C:\” using “CD \ + ENTER”, now use the following command “C:\msiexec.exe /a c:\setup.msi + Enter” the folder “C:\Program Files (x86)\Lenovo\Lenovo BrgVolOSD” with this two files “BrgVolOSD.exe” and “CD_DLL.dll” will be created
Create a shortcut “BrgVolOSD” and copy this in the startup folder “C:\ProgramData\Microsoft\Windows\Start Menu\Programs\StartUp”
Update Bluetooth driver using windows update if Windows detect the dongle, if not go to next step
If Bluetooth is not detected, mean that the actual hardware somehow is disabled. In order to enable, boot the PC with a Windows 7 live DVD with the USB drive installed in the PC. After PC been running with Windows 7 live, Install the file “h1100174.exe” previously copy in the USB drive. Use the USB drive also as installation path for the Bluetooth software, when the installation is done, look in the folder “X:\Program Files\Lenovo\Bluetooth Software” and run the file name “BTTray.exe”, press right click in the Red Bluetooth icon on the taskbar to enabled the Bluetooth dongle. Reboot PC in Windows 8.1 without any DVD media inside, this time Windows 8.1 will be able to recognize the Bluetooth and install the respective drivers.
Another way, install the latest release from Broadcom BTW_12.0.0.9820 from the following link:
BTW_12.0.0.9820.zip
directly in Windows 8.1. Remember if the software is uninstall the Bluetooth will be disabled and
Windows will not be able to see the device in the “Device Manager”
Last step, use your own Windows 8.1 Pro Key and Office 2013 key to register and activated your legal copy of the Microsoft software’s.
Final, enjoy.
This guide was creates for me to help peoples like me in this community.bump
-
Finally I decided to move forward and installed Mountain Lion 10.8.4 (with all the updates). Now I am facing a dilemma, my external iSight Camera is working fine regarding the video fee but the Mic is useless. I am using a Mac Pro 2009 and a Apple Cinema Display 30". I checked all the trends about iSight External devices but no one has a really specific solution for my problem. Firewire is not longer supported with Mountain Lion? By the way my iSight was working perfectly before. So I am wondering if something wrong happened with the OS and the support for this kind of device? I reset the PRAM, the SMC, even I reinstalled the MAC OS X Mountain Lion (10.8.4) from scratch. So I am wondering if the problem is that ML is not longer supporting this device or what is the issue here.
Hope someone can help me with it!
Thanks
JalcomJalcom wrote:... Firewire is not longer supported with Mountain Lion?...
Not true. External iSight works fine with my '09 Mac Pro and 10.8.4.
Jalcom wrote:... So I am wondering if something wrong happened ...
So it must have.
Jalcom wrote: ... help me with it!...
You have tried several good things, but there may be other suggestions from http://support.apple.com/kb/HT2090 that you have not yet considered. Be sure to check more than one Apple app in more than one user account to help you pinpoint the cause of your trouble. Then you will know what to fix.
In addition to the Apple troubleshooting, check your > System Preferences... > Sound > Input to verify that your iSight's mic is selected, not muted, and that its volume setting is properly adjusted. You may need to check this again after restarting Mac or changing apps that use the mic.
Also, be certain that the apps you are testing are configured to use iSight's mic. Different apps select the mic in different ways. For example, QuickTime X allow selection among various microphone alternatives via one of its preferences as shown in the image below:
(I was using my Display microphone and did not have my external iSight connected when I made this image. Therefore, there is no iSight mic shown in my list of mic choices above. If your iSight's mic is properly connected, turned on, and recognized by your Mac, iSight will show in your QTX microphone preference choice list.)
If you are trying to use your iSight with a Flash based web site, also check your Mac's > System Preferences... > Flash Player > Camera and Mic settings to verify that your Flash system preferences are not blocking your mic.
Some other apps may offer mic and or camera selection via their application menus. If you have trouble finding out how to select the iSight internal mic in other apps, check each apps' Help or post back the name of the app whose selector you cannot locate here so we can try to help.
Message was edited by: EZ Jim
Mac Pro Quad Core (Early09) 2.93Ghz OSX 10.8.4 24" LED Cinema Display External iSights -
i bought some ringtones on my iPhone, later on i sync my iphone to my old computer now i have a new mac pro desktop and i only have 2 ringtones on my phone but not the rest of them how can i get them back without having to pay for them again?
If you bought them on your iPad then you will need to connect your iPad to your computer's iTunes and do File > Devices > Transfer Purchases to copy them over to the Tones part of your computer's iTunes library and you can then sync them to your iPhone - ringtones are a one-time only download, so you won't be able to redownload them directly on your phone.
-
User Contributed Tips in the Mac Pro Displays and the Mac Pro forum
*The following User Contributed Tips are located in the Mac Pro > Displays and the Mac Pro forum:*
None at this time.
*The following related tips are located in other areas of Apple Discussions:*
a brody - Using a second Mac as a display for a first
http://discussions.apple.com/thread.jspa?threadID=1587927
Publish date: July 7, 2008
See also User Tips LibraryYou can use the two graphics cards, but it's only useful if you have more than two displays. It won't give you higher speed.
-
I installed LION on my mac pro 2008 and it's alway's pop with " there was a problem connecting to the server " Time Capsule" .How can i remove this popup. My Time machine is working fine and also rename it with less than 7 karakters. But the popup keeps on coming with the old name.
I have a BT Infinity router plugged into the Time Capsule, not sure where the radio settings are?
They are able to use the network settings of the TC i.e. they can connect to the internet via the wifi through the TC but when they try and connect to the AirPort Disk this is where it is not allowing a connection.
I don;t have the drive shared out at all at the moment, is this necessary? How do I do this if so?
I have attached the screen shots of all the settings.
Thanks again for your help. -
I have a new Mac Pro computer and have migrated my files from my older computer to the new computer. In trying to open a Lightroom catalog on an external hard drive I keep on getting the message "lightroom cannot use the catalog named " " because it is not writable and cannot be opened. I have fixed all the "permissions" and yet it will still not open. How do I fix this?
Hello Forum Members,
I figured it out. You have to select the actual logo of the Lightroom catalog and then click on "get info" and allow what ever your new user name to "read and write". That worked!
Henri Silberman -
I am running system 10.5.8 on my 17" mac pro laptop and using Firefox 3.6.17, I have tried on several occasions to install your new version 4 and when I drag icon onto my applications folder it tells me I have a newer version already there (which is now the 3.6.17). What is going on?
Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
Mozilla are working to prevent Mac users with non-compatible systems from getting the notification about Firefox 4, and also not displaying the "Download Firefox 4" button on http://www.mozilla.com
Maybe you are looking for
-
Error while opening a component in ACC
I am getting error while trying to open component in ACC. I can the component is running, but when tried to open it (either thro Open component or by double clicking on it) am getting the following error. Any idea on the cause of this error? Server e
-
Hello , this is what happen ! I turned on my Desktop from being in sleep mode and as it came on Firefox restored everything and made me lose all my settings and all my toolbar favorites and bookmarks , all my work was on here and all the compan y's I
-
What to do with 6310 all in one printer when done with it?
Want to sell, donate, or recycle (in that order) my HP 6310 All-in-one printer. The door no longer shuts and an eror message frequently appears saying "carraige jam". We simply push "OK" and it works. Instead of trying to fix it -- we bought a ne
-
Remote's Icon over Screen and Automatic iTunes Launch
Sometimes when I'm watching a movies using VLC and I hit remote to change volume, this icon appears over the screen http://img97.imageshack.us/i/screenshot20091031at846.png/ Then it disappears in a couple of seconds. Any idea what is that and why is
-
Plug in pour face avant déportée. ou les trouver?
under netscape 7.0 /linux, when I connect to the labview web server, I need a "plug in" but the web page of ni asks a number (infocode) to continue. what is the good number?