Dvd player rewind problem

hi,
often times when i'm viewing a dvd on dvd player, if i try to rewind, especially for long amounts of time, the pinwheel shows up and i'm unable to stop the player form rewinding, which is especially annoying if i'm far into a film.
does anyone know of any solutions or can you point me to a thread that discusses this?
thanks very much.

help?

Similar Messages

DVD Player App Problems

Hi,
I have an iMac G3 running the latest Tiger with a FireWire External DVD drive. Whenever I load DVD Player, I get an error message telling me that a valid DVD player could not be located. What's the problem here? Any workarounds? Thanks.

Hi everyone, thanks for all of your comments. I actually just checked out Apple KB Article: 42727, which states that DVD Player will not work with an external DVD player under any circumstances due to licensing requirements and problems. But that's okay, I'll just get a third-party app that is not affected by this setup. Thanks a lot!

DVD player software problem

Hi
I have an imac G5 and I am having problems with my DVD player software - previously it had been working OK. When I try and play a DVD it starts slowly with no sound and then stops after about 10 seconds. I have tried trashing the DVD player preferences and rebooting without success. I have also deleted and reinstalled the DVD player software from the OSX install discs using Pacifist but the result is the same. It does not appear to be a problem with the DVD drive as I can play the same DVDs on the computer using VLC software. I have checked for bad RAM using Memtest but it seems OK. Any thoughts? Is it a strange interaction between the DVD player software and the drive?

Hi Roger and Welcome to Apple Discussions ...
Try cleaning the disks.
If your movie stops and you see a disk error message, check the surface of the DVD for dust or scratches. You may need to clean the disc or the optical drive. Debris or residue may disrupt video quality or cause the movie to skip or stop playing. How to clean and handle CD or DVD disks
A movie will stop playing if there is a problem sending digital data to your digital audio equipment. For example, if you are using a USB or FireWire S/PDIF converter and it becomes disconnected from your audio device, then the video stops.
Make sure your digital audio devices are properly connected and turned on. If the video doesn't begin playing again, click the Stop button on the DVD Player Controller, then click Play again to start playing.
If you need to switch to System Sound Output, click the Stop button on the Controller, choose DVD Player > Preferences, and click Disc Setup. Then choose System Sound Output from the "Audio output" pop-up menu.
Carolyn

DVD Player New Problem

Suddenly DVD Player ver. 4 will not play DVDs with OX 10.3.9. This was never a problem before. "...no volumes that Mac OS X can read." Why would DVD Player unexpectedly cease working? Thank you.

Try using VLC

Account Specific Apple DVD Player Audio Problem

I accidently went reverse with the wrong "sticky key" locked during a dvd. (I thought I'd pressed "command-arrow")
Since this I have no audio on any video when using the DVD Player software IN THIS ACCOUT ONLY.
After restarting both the DVD player and the Mac with no success, I switched user accounts, and continued watching said dvd with no problem. Switching back, still no sound.
Clearly I created an error in my user account prefs. In the past, an easy fix. But where do I find the user library/prefs in Mountain Lion?

Hi Chris,
Found the "easy" approach..
A) Hold Option while selecting the Go Menu while in the Finder. The User Library shows as "Library".
B) Keep holding Option as you select Library. (If using Sticky Keys, this means lock the Option Key at point A.)
TADA! The user library is opened before one's eyes.
From there, I switched user accounts via fast user switching, repeated the above. Next I copied the DVD Player folder in Application Support to an external drive, switched back, and replaced the corrupted user folder by copying the one on the external drive.
Sound has returned to the DVD Player! It was likely one file, but none popped out at me, so I just replaced the entire file.
Pam

DVD Player has problem burning -R verbatum lightscribe disc

Has anyone else had this issue? Trying to burn an Imovie HD movie and my new Panosonic DVD player says its uncompatable. Is it the disc or the computers DVD writer?

Hi
There are more than one thing about this - But as You've done and used DVD+R before - first thought is
• Dust on the DVD-Burner Laser Lens - I use a DVD-Cleaning disk (with brushes - NO Liquid) now and then
Other thoughts
• Cheap DVD Brands - Usually do not work as Memorex, NoName etc.
- I only use Verbatim
• DVD type - DVD+R is a more modern format and older DVD-players can not playback these
- I only use DVD-R (Never ever DVD+/-RW)
• Burn speed matters - full speed and many BURN ERRORS
- I always set this down to x2 or x4 - Plays on many more DVD-players
• Save as a DiskImage
- I always do - to see that all works as I like it before burning - then I use Disk Util tool or Toast™ to Burn
( This has ONE Major Advantage ! it splitts the DVD process into two parts and if anything goes wrong one can pin the problem to one of the parts )
• Free Space on Start-Up (Mac OS) Hard Disk
- for SL-DVDs I secure a minimum of 25GB free space - for DL-DVDs 50GB and if HD-Material is used about 4 - 5 times more to let iDVD and Mac OS run OK during Process.
Yours Bengt W

DVD Player has problem catching up with DVD burned from DVD SP

I have a DVD with about 20 small videos and when I watch them either from the menu that plays the chosen video or from the Play All list I created with a story, it was often starting the videos already into the video by a second or sometimes a few frames. It did NOT do this in simulator or on the computer DVD player, but it did it on a few of the external DVD players I had hooked up to TVs. I played it on 4 DVD players and it had this problem on a handful of the videos on just two of the DVD players. They were always the same videos too.
So, I inserted a 15 second slug of video that I exported from FCP to give the DVD players time to process before the video actually started playing. The problem with this is that it moved the video track fine, but it moved the audio just slightly off from the video. The maddening thing is that it moves the video in such a way that it is off by part of a frame. How the heck does that happen????? And it won't let me move it to the nearest actual frame.
So, I need help. How do I fix it to where the audio still lines up to the video or how can I avoid the first problem so that I don't need to insert a slug?
I have to submit this DVD Monday morning to discmakers - help please!!!!

I suggest that you create 15-second silent audio slug that you can use to move the audio the same amount you have moved the video.
John Link

DVD player rewind?

I can't simply fast forward or rewind with the DVD Player. Are those functions not available? If that is the case is there another DVD player that anyone has used before and can recommend? I'm a PC switcher. The DVD player seems like a crappy product as far as I can see. When compared to the products I've used on a PC anyway. Am I wrong?

Try a player called VLC. It's a free download from:
http://www.videolan.org/vlc/
BTW to fast forward during play in DVD Player, hold down the fast forward button (with the mourse cursor) rather than just clicking on it.

DVD player subtitle problem

I can't get rid of subtiltles tried with many different DVDs and even when off the subtitles are still shown.
What can I do
P.S.
There is a lot of funny things happenning in tiger, itune can't save libraries, finalcut pro shots down with no reasons and I get the screen of death when I try to reinstall tiger.

Hello,
Sorry to hear you are having problems with your Mac.
Re: the DVD problem. Showing subtitles in movies
Some movies may include subtitles in one or more languages. You can display subtitles using the Controller.
With the movie playing, choose Controls > Open Control Drawer to show the hidden controls.
Click the Subtitle button to turn subtitles on. If subtitles in other languages are available, press the button to choose one from the menu.
Note: Some discs may not allow you to change subtitles in this way. You may need to use the disc's interactive menus instead.
You can also use the Navigator to find out which subtitles you are currently using and change the selection.
To set the default language for subtitles, choose DVD Player > Preferences and click Disc Setup. Choose a language from the Subtitle pop-up menu.
Some discs may also support DVD Player's closed captioning feature.
As for the software glitches and the fact you can't reinstall Tiger is much more of a concern that the DVD glitch. Have you tried booting from your Tiger disk holding down the C key? I need more details please in order to assist you.
Carolyn

Apple DVD Player: Audio problem w/ stereo playback

Hello, i thought that there were already various answers to this topic but i didn't find any.
THE PROBLEM: I use a simple stereo system to playback the sound of movie dvds on my powerbook g4. problem is that the sound is very inconstant: sometimes it's too loud, other times it's way to low.
any idea how i can get this to a constant level?
thanks in advance,
tobias

Try changing the "Dolby dynamic range compression" setting in the "Disc Setup" preference of DVD Player.

DVD Player Zoom Problem...

DVD Player has the ability to remember zoom settings on previously inserted DVD's. However I have found that the only way that this works is if you leave zoom checked and running all the time. This is fine. However, what I have also figured out is that if for example you insert a disk that needs to be zoomed and then follow that with one that doesn't ( and has never been inserted before), the default behavior is zoomed.
Why I am posting is to find out if anyone else has noticed this and been bothered by it. If so please send feedback to apple to get this added to the next DVD Player update.
The expected behavior for me would be defaulting to unzoomed, or having a choice as to where to set the default by possibly setting it without a dvd inserted.
Thanks,
Larry

This has already been fixed for the next version by resetting back to the normalized state when the disc is ejected.

Problems with mavericks dvd player

Has anyone noticed that dvd scripting is poorly implemented in Mavericks?
I have a dvd with a nested script to randomly select from among 48 tracks on a dvd.
Since that exceeds script length limitations, I had to break the script down into 3 parts:
1. A master script which decides whether to choose script 1 (items 1-24) or Script 2 (items 25-48)
2. Script 1 which chooses from among tracks 1-24
3. Script 2 which chooses from among tracks 25-48.
Each track has the jump to set to the master script.
This used to run fine under 10.8.6 and it runs find on a normal dvd player.
Problem is: it doesn't run under Mavericks. The Mavericks dvd player simply ignores the master script after the first iteration and once it selects script one or script 2 it only will play back tracks from whichever script it selected the first time.
This is a huge defect.
I've tried adding a line to my code at the beginning of each script to reset the variable controlled by the master script to 0 (I use 1 or 2 to decide which script to choose). It seems to be ignoring the jump command of the tracks to return to the master script and will only return to the script which controls its playback.
Any hope Apple that you will fix this?
Keith

Too bad I have to reply to myself in order to correct something:
It seems the compiled DVD doesn't run under 10.8.6 either, but it runs FINE on a real dvd, runs fine in simulate mode in DVD Studio Pro. But for some reason even though DVDs are restricted to 124 lines of code, DVD studio Pro refuses to compile my script when I make it a mere 50 lines long. Anyone have a solution for that? I really need this to run from a harddrive so I can automate the playback. I'm trying anything I can to rewrite the script to conform to the limitations of the Apple DVD player though those are not stated clearly anywhere I can find. Does anyone know those limitations?

Won´t boot up XP or XP in DVD player

Hi.
I have billd my second computer (the last one was a 486 DLC 40). SO u can say that I am a new bee lots of new stuff sens last time
Now to the problem..
I put everyting to gether, turnd on the coumputer everything went ok. all fan is spining ok. I had som problem whit this new S-ATA disc but I manage to fix it (didn´t know how to install it, had only been working whit P-ATA befor).
So I installed Win XP and I were verry verry Happy. When i were in XP i notest that my Grafik Card wasent running ok (i Had a ? on that device).
So i installed the card from a disc, But when it were almost done I got a blue screen and the computer mad a restart.. I didn't realy see what the blue screen sad becours it made a restart after only a few sec.
After that restart I have Problem.
Í'll get past the Bios, and so on, but when it is going to boot from the HD, the screen got all black. Then I try to boot from my DVD player (MSI also) a got this message "Press any key to boot from CD...." after that den i get a black screen.
Grafik Card Failure? Nope I have tryed whit a nother one.. a Gforce2 same result.
HD failure? I dont think so becours I have the same problem on the DVD player
DDR problem? I dont know..
Prossesor failure? I dont know.. (dont think so)
Power problem? I dont know (dont think so)
I have reset the Bios in Bios meny & I have made a reset on the Cmos
I have a D-Bracket everything is Green (= operatingsystem booting)
My not working system
1 MSI K8T Neo-FSR 6702 ver 1.0
1 Crosair Value S. PC3200 DDR-DIMM 512Mb
1 Seagate Barracuda 7200.7 120GB 8MB - IDE ATA/100 8MB cache 7200RPM
1 Gainward GeForce FX5700 128MB DDR 5ns AGP (ultra)
1 MSI DVD burner IDE DR4-A
1 Sony Discdrive
I am using a CheifenTech Midi Tower whit a 360W Power supply.
DC output
+5V 35A
+3,3V 28A
+12V 17A
-5V 0,3A
-12V 0,8A
+5vSB 2A
If I look in Bios at the power I got..
Vcore 1,472V
+5v 5,168V
+12V 11,863V
-12V 11,743V
-5V 5,026V
Batt 3,568V
+5VSB 4,993V
& some Temp
CPU temp
40c / 104F
systemp
33c / 91F
Ps sorry for my english I´m from Sweden ds..

Nope.. that didnt help.. now I got the Screen a black after that I have pressed crtl + Home, Even if I had the Win XP CD in.. Same resullt..
So i have probobly have to change the PSU..
That is how ever stange becours the Company that were selling this, were selling this as a complett kit, Tower, CPU, motherbod, HD, Grafcard and so on..
I am going to call them now...

DVD Image Quality Problem

I just began using Final Cut Studio and elected to burn my DVD from IDVD as I am not yet comfortable with Sutdio Pro. When I play back my disc on any computer MAC or PC it plays fine. However, when I play it on a set-top DVD player two problems occur. 1) I get occasional brief pilelation in a scene. It doesn't always happen at the same place in the playback. 2). Some of the video scenes (especially those which I have extended by slowing the motion, even thogh I have applied frame blending) tend to flicker. Neither of these problems occur when the DVD is played on a computer/monitor or even when played on a tv monitor using the s-video output from a computer. But both happen on the three set-top players I have tried. Any thoughts. Thanks.
G-5 Quad Mac OS X (10.4.2)
G-5 Quad Mac OS X (10.4.2)

Welcome to the world of authoring DVDs. It is very difficult to troubleshoot the exact problem. For starters, iDVD did its job, it made a DVD compliant disc that plays on a DVD player. It plays better on your computer DVD player for a variety of reasons. Your computer has much more sophisticated hardware/software for DVD playback than does a tabletop unit. It could simply be that a progressive scan tabletop DVD player may give you better results. The point being that two different players can yield different results. Artifacts/ pixilation can be by-products of MPEG2 compression (which is what iDVD does to create a DVD). It is helpful to have a basic understanding of what makes a DVD a DVD. When you record on mini-DV you are recording to an already compressed format. Arguably a very good compressed format but compressed nonetheless. This means information is being tossed at the point you are using the camcorder. iDVD, or any DVD authoring app on any computer, Windoze or Mac, compresses this material even further into the MPEG 2 format for playback via a tabletop DVD player. Now mini-DV has about 30 frames per second (NTSC). MPEG (in a very basic nutshell) takes a picture about twice every 30 frames and uses this as a reference frame and then only records the motion difference between that reference frame and the next time it creates a reference frame. So you go from 30 frames/second to TWO, with motion difference! This is how one hour of DV which is 13 gigs, can be compressed to fit onto one DVD. Two hours would be 26 gigs of DV compressed to one DVD! Hence the general quality difference between one-hour and two. And keep in mind that is compression will show artifacts that may have always been there but you didn’t see until the other 28 frames where tossed out. Slow motion can also be very difficult to encode. I have found that going under 50% slow-motion is problematic. One work around is to create your slow-motion sequence and send it back to tape and then re-import from the tape. Now it is no longer a software effect but an actual 29.97 fps clip. Clips with a lot of motion, quick pans & zooms, hand held shots and so on, will also suffer more artifacts because the whole frame is in motion and thus difficult to encode. Which is why a tripod is recommended to keep the frame steady!
Just some thoughts… welcome to the Discussions!
Mike

Dvd studio pro: DVDs won't work on DVD player and windows computer

Hi
I have burnt some dvds on DVD Studio Pro I checked they were set to SD and PAL and have played them on my MAC and DVD player no problem but now I am hearing back from my client that they tried playing them on their windows computer and laptop and their DVD player and it isn't working what could be the reason for this?
From Mike

You can see if they have another software player available. Usually VLC is a good option. Windows player can be a bit all over the place depending on patches of the OS and other items. I have encountered some strange things, including people claiming that DVDs I have authored were doing things that had nothing to do with the DVD (beyond the scope of what a DVD can do, etc.)
When you say DVD Player, does this mean they are also trying to play it in a DVD Player (real player and not in computer?) How did you burn the DVD? Straight from DVD SP? Check first play settings and other items?
These are some of the first things I would be starting with, particularly if real DVD players (not in computers) are concerned. It also can be something as small as dirt or scratches on the DVD itself. Some machines can be better at compensating than others are.

Dvd player rewind problem

Similar Messages

Maybe you are looking for