DVD Player to play mini-DVDs?

Hi,
Please suggest (make and model) an external DVD player
which will play Sony Handycam mini-DVDs (3 inch diameter)
and connect easily to a MacBook Pro.  Thanks!
--Prahas

Yes, I meant an external DVD drive.  I've heard certain
makes/models have trouble with a MacBook.  Does
Other World Computer (the name of the store your
link redirects to) sell only Mac stuff?
Thanks!

Similar Messages

  • DVD Player not playing video DVDs

    This is a new problem on my MacBook Pro. The DVD player has played videos in the recent past with no problem. Now, when I insert a DVD, the computer attempts to read the disk (at least it sounds that way) and then ejects it. I have repaired permissions and researched on the discussion forums, even downloaded VLC to no avail. The CD player is working fine and all non-video DVDs are being read.

    are these legit dvd's from the store or burnt DVD's? also try running a lens cleaner thru the system

  • DVD Player Not Playing Specific DVD

    I was watching my 10th season of the simpsons yesterday, and suddenly an "unknown error" popped up. And now whenever I try to watch the DVD, nothing happens. It shows upin the finder and even DVD player pops up, but nothing plays.
    I can't remember the error (errors, actually. There were two of them) numbers, but the first one had a 7 in it, and the 2nd had a 6 in it.
    What do I do to watch my DVD?
    Hope you can help.

    Martin Bolsinger wrote:
    Try to clean the CD/DVD player lens with a lens cleaning CD (available in computer stores). Do not try to fumble around.
    Good luck
    Martin
    Would that change anything?
    I mean, it plays all my DVDs but that one...

  • Shapeshifter themes may prevent DVD Player from playing movie DVDs

    A user on Apple Discussions reported that every time they played commercial DVDs they got an
    "Error: `nilP`"
    When trying to play DVDs on their DVD Player software. Turned out the problem was a certain theme they had installed to use with http://www.unsanity.com/ 's Shapeshifter product. At the point of the writing of this FAQ, it is unknown which themes cause this issue. However, if you get this issue, please report the problem to the theme author and Unsanity so that the problem may be fixed. Always be sure that when you install system modification utilities like these that they are up to date for the operating system you are about to update to before updating to that operating system, and checking how to uninstall them if necessary before updating the operating system.

    Reset the NVRAM/PRAM and Reset the SMC, then try again.

  • How does a DVD Player recognize/play a DVD?

    I'm wondering, does a DVD Player 'look' for the Video_TS and Audio_TS folders?
    I'm wondering because I found a backup of an old-old DVD I made a few years back. I just have the Audio/Video_TS folders. If I burned these to a DVD in the root folder, would my DVD player be able to read it? Or do programs like DVD Studio Pro burn some sort of 'invisible' data to the DVD-R which a DVD Player 'looks' for?

    Mac OS X's basic drag-and-drop burning (from the Finder) creates a hybrid HFS+/ISO-9660 disc. You can try creating a DVD Master image file with Disk Utility and then putting the files on that disk image. Disk Utility should create this type of image file as a UDF disc. I'm not in front of a Mac right now to give more detailed instructions, or to even tell if this will work.
    An easier solution might be to download DiscBlaze which will allow you 5 burns before you have to register. It can burn a UDF disc.

  • HT4108 Can I connect my external apple DVD player to play movies on my ipad 3?

    Can I connect my external apple DVD player to play movies on my ipad 3?

    I am afraid you cannot connect the external DVD player to the iPad. It won't work.

  • HT1382 Is there anyway to convert video taken by ipad and burn it to a DVD that can play on DVD player?

    Is there anyway to convert video taken by ipad and burn it to a DVD that can play on DVD player?

    Persius,
    Nearly every DVD that will play on a set-top player *should* play on a computer, provided two things:
    1.) the computer has a DVD player that can handle that flavor of DVD media, DVD RW, DVD-R, DVD+R, DVD DL, etc.
    2.) the computer has a software player installed. This feature has been removed from some common media players. You may need to locate, download and install a separate software player.
    There could be another discussion on interlaced vs progressive scan media, but I'll let you ask that question.
    Hunt

  • DVD player not playing DVDs

    I can't seem to get my DVD player to play any of my movies. When I insert the dvd it doesn't show up on my desktop. The DVD Player doesn't start up until I start it(I have the option to 'open DVD Player) when I insert a DVD). I've tried several DVDs, all real dvd's, not burned or copied. I keep getting "Supported Disc Not Available". I haven't changed the region... I'm not even sure how to do that. I can still read and play music cd's. I've also tried using Front Row and I get "The DVd cannot be played... the format was not recognized".... well, They are the same DVDs I've watched befor so I'm wondering why... any thoughts befor I call up apple and get rejected since my warranty is shot.
    Thanks....

    You might try to reset the SMC (System Management Controller) and/or PRAM (Parameter Random Access Memory). Mac OS X: What's stored in PRAM?

  • Control DVD Player to play specific chapters of inserted DVD?

    (this question also posted in Automator discussion)
    I would like to create an applescript that will instruct DVD player to play back certain chapters on a DVD. I want to send the script by email to a friend, so she can insert her copy of the DVD (The Yellow Submarine, actually), run my script, and view a "scripted" playback of chapters I've selected.
    Even better would be the ability to determine edit points by time rather than chapter.
    My applescript skills are weak--I can edit an existing script, but I don't have experience writing from scratch. Thanks very much for your suggestions.
      Mac OS X (10.4.8)  
      Mac OS X (10.4.8)  

    Here is some starter code:
    set desired_Chapter to 7
    tell application "DVD Player"
    activate
    play dvd
    set available_Chapters to available chapters
    end tell
    if (desired_Chapter ≤ available_Chapters) then tell application "System Events" to tell process "DVD Player" to click menu item desired_Chapter of menu "Chapter" of menu item "Chapter" of menu "Go" of menu bar item "Go" of menu bar 1
      Mac OS X (10.4.4)  

  • I burned some files onto a DVD-R disc using my MacBook Air.  I did it by dropping the files onto the DVD icon in Finder and burned it right there.   If I put the dics into my DVD Player, it plays just fine.  If I insert it into a computer, it opens t

    I burned some files onto a DVD-R disc using my MacBook Air.
    I did it by dropping the files onto the DVD icon in Finder and burned it right there. 
    If I put the dics into my DVD Player, it plays just fine.  If I insert it into a computer, it opens the disc like a memory stick or something: I can open the files, but it won't play via Macs DVD Player. Can I do something so Macs will recognize the disc as a Dvd?

    I burned some files onto a DVD-R disc using my MacBook Air.
    I did it by dropping the files onto the DVD icon in Finder and burned it right there. 
    If I put the dics into my DVD Player, it plays just fine.  If I insert it into a computer, it opens the disc like a memory stick or something: I can open the files, but it won't play via Macs DVD Player. Can I do something so Macs will recognize the disc as a Dvd?

  • Finished DVD won't play in DVD player.....

    Hi All,
    I am new to DVD Studio Pro; I made the jump from idvd......!
    I just finished my first DVD, and it won't play in my dvd player; it plays fine on my computer with the DVD player. could it be because the dvd player is about 6 years old?
    TIA!!

    How did you burn the DVD and what media? That can aalso cause issues, Which version of DVD SP are you using and what machine?
    Take a look at this thread, discusses how some things can be off depending on what andd where you are trying to run things, goes to qutting, but also something that can cause other issues
    http://discussions.apple.com/thread.jspa?messageID=6643197#6643197

  • How do I burn dvd that will play in dvd player

    How do I burn a DVD that will play in DVD player for my TV?  Example, iPhoto images, Utube images, etc.

    If you have to purchase an iLife disc in order to obtain the iDVD application remember that the iLife 11 disc only provides  themes from iDVD 5-7.  The Software Update no longer installs the earlier themes when starting from the iLIfe 11 disk nor do any of the iDVD 7 updaters available from the Apple Downloads website contain them. 
    Currently the only sure fire way to get all themes is to start with the iLife 09 disc:
    This shows the iDVD contents in the iLife 09 disc via Pacifist:
    You then can upgrade from iDVD 7.0.3 to iDVD 7.1.2 via the updaters at the Apple Downloads webpage.
    OT

  • Dvd player air play

    I am unable to get the Mountain Lion DVD player to play video over air play (screen is grey and white checker board).  The audio is just fine.  If I turn air play off - the dvd is visible on my MacBook Pro screen.  I have a early 2011 MacBook Pro.

    It's probably a DRM limitation dictated by the publisher of the DVD.

  • IMac no longer recognizes my DVD player after upgrading to DVD Player 4.6

    Hi,
    Several days ago I upgraded to Tiger and then 2 days ago, through "software update" I upgraded to 10.4.3 and also upgraded to DVD Player 4.6
    I just discovered that my computer no longer sees the DVD player and an inserted DVD doesn't show up anywhere (when I check under "Hardware" and then "Disc Burning" under "About This Mac" it says "No burning device was found."
    I tried reinstalling the upgrade (DVD Player 4.6) but it says it can't because there's no valid DVD player in the system (my computer has a Superdrive and I've played and burned DVD's a plenty in the past several months).
    Any help/info will be GREATLY appreciated!!
    -Stephen

    Hi sjberg!
    Welcome
    Will this update help you?
    DVD Playback Update 4.6.1 addresses a disc validation issue some users may encounter when attempting to play a disc for the first time with DVD Player 4.6. This update is recommended for all users of DVD Player 4.6.
    http://www.versiontracker.com/dyn/moreinfo/macosx/12701
    Sue

  • IMac 2008 OS10.9.1 external dvd won't play movie DVD's

    iMac 2008 OS10.9.1 external dvd won't play movie DVD's. Other DVD/CD's are recognized.
    My internal DVD/CD p-layer/burner stopped working 3 years ago like many other iMacs did.
    Any help would be greatly appreciated. This is all red because I am ******!

    I have discovered, no thanks to Samsung techs, what the problem is, and it might be revealing for others, as well. It seems that DVD Player, which is the app Apple provides in OS x for (naturally) playing videos, doesn't work with external drives if the computer has an internal drive – even when, as in my case, the internal drive is dead.
    I have learned, however, of the existence of a couple of alternative, free applications that run video and audio disks with external optical drives, and one of them, at least (VLC), seems to be widely acclaimed. Does anyone know whether bypassing DVD Player could be a bad idea? There were some gripes from one or two reviewers about awkwardness with playing audio DVDs with iTunes, but I'm not sure what they meant when they said that you have to click on individual items in a selection. Would that mean, for example, having to click on each movement of a Mozart trio? That I couldn't play an entire album's contents of another kind of music without clicking on each song?
    Getting the internal optical drive replaced would be prohibitive, even if the parts could be obtained, so I guess I'm stuck trying to deal with the external drive I have and finding the best replacement for DVD Player that I can find. The interesting thing is that the drive works beautifully with a MacBook Air I tried it with, so I guess that is because the Air doesn't have an internal drive?
    Wouldn't you think that Samsung techs would know all this? The one I spoke to told me to make sure that my system preference for CDs and DVDs was set to open automatically with DVD Player and sent me all kinds of FAQs, plus a way to get an RMA number for a return. Not a word about difficulties with Macs having an existing internal drive. And all after spending a very long time talking with me about what was going on, what the error message was, and so on. I guess the message hasn't gotten to them.
    I hope this information will be helpful to someone.

Maybe you are looking for

  • Mac Itunes 10.2.1 dozens of songs ! in front, itunes can't find them

    After updating, with no other changes, DID NOT rename or change path to external NAS where songs are located, dozens/hundreds of songs can't be found by itunes. 2click on it and locate and say use for rest but no work, it would take me hours and hour

  • Help with panning image

    Hi There I'm building a site that features a panning panoramic image with buttons embedded into it. I've got a piece of script that does it for me, but I have two issues. 1. My panning image is 500 pixels high and my document is 700px, right now the

  • Problem Dynamic Security : No filter applied without Refresh

    Hi,  I am surprise because when I open my PowerPivot report on my Bi portal on Sharepoint 2013, no filter are applied, Dynamic Security not work, unless I do a refresh of my report. When I refresh my report, with an other windows account, all the fil

  • MultiCamEdit  preview layout in CS6 changes.

    I'd appreciate some help- with this .  First time this has happened.  I'm working on a 3 cam MultiCamEdit.  Been doing this every week for about a year now and all of a sudden, the layout changes. Maybe you can suggest a way to reset it back.  I did

  • Price Condition control

    Hi, I use two kinds of discounts in one pricing pro., one is based on quantity(Caculation type), another is fixed amount, but if over deliveried, I find the second condition(fixed amount) also changed according to actual quantity, how can I avoid it?