Dvd players won't read iDVD 6 burned dvd...

My recent DVD of photos burned with iDVD 6 on 2 different DVD-R (Verbatim and Maxwell) is readable on Apple computers (tried on 3 different G4 powerbooks) but not readable in the severeal home dvd players I've tried (3 different makers: 3 year old Panasonic, 2 year old Samsung, 2 year old Sony, all compatible with DVD-R format). I will try as suggested in many forums to burn at slower speed. Any other suggestion on what is causing this?

Hello,
I have the opposite problem. DVDs made with iDVD6 play fine on my Samsung combo DVD/VCR and my Sony Windows notebook -- but they DON'T PLAY BACK on the Apple iMac that burned them or on my iBook -- both the Apples return a message that the media cannot be read in this computer (great: it can be burned but not read!).
Did you find any answer? if so, I'd appreciate your sharing it.

Similar Messages

Using OS X 10.8.4. Installed iLife 11 to get iDVD. iMovie ready to burn through iDVD. Attempted burn. iDVD says burn is complete. Burn lines are on DVD R. Same disk cannot be read and is considered blank by computer and DVD player. How do I burn properly?

Using OS X 10.8.4. Installed iLife 11 and got iDVD. iMovie ready in iDVD. Attempted burn. iDVD says burn is complete. Burn lines are on DVD+R. Same disk cannot be read and is considered blank by computer and DVD player. How do I burn properly?

Hello TchrDi,
I suggest this article named Archived - iDVD: Troubleshooting issues with burning discs found here http://support.apple.com/kb/ht1583.
It is pretty lengthy, but also pretty thorough.
Cheers,
Sterling

G5 drive will read and burn DVD's, won't read or burn CD's

I have a two year old G5 mac that suddenly won't read or burn CD's but the DVD burner/read is working fine. It just spits out CD's. The drive is a Sony DVD RW-DW U12A; revision AADB.
I just got ilife 08 (worked fine on DVD) but have a CD of iwork 08 that I can't use! Help!!

Based on past user reports/problems with the Sony drive, when problems such as yours occur, it's time for a new drive. DVD and CD are separate lens', so one can fail while the other continues to function. The Sony drive has been prone to problems, and early failures (based on posts in these forums, and others).
You may attempt cleaning, as it is possible that the CD lens is blocked by dust, or dirty. But, when commercial discs/install discs can't be read, it doesn't bode well for the drive.
Comparing the cost of a quality cleaning kit, and the cost of a new 18x Pioneer DVR-112 ($30), you may just opt for the Pioneer.
http://www.newegg.com/Product/Product.aspx?Item=N82E16827129007
Review of DVR-112:
http://www.cdfreaks.com/reviews/Pioneer-DVR-112-DVD-Burner-Review
If you opt for the Pioneer, the drive has native support in Tiger, though it needs Patchburn for iApp's support (all drives, other than Apple OEM, require such):
http://www.patchburn.de/

TouchSmart 300 Dvd Player won't read or burn DVD

My dvd player is not working correctly. I am able read and burn CDs, but the player won't read or write DVDs. I have a touchsmart 300 running Windows 7. I was trying to burn some home movies in WMA format. Movie Maker recognizes a blank DVD, and attempts to burn the DVD, but once it finishes, the disk is blank. I then tried to just burn a MPG file using another software program and it failed at the validation stage. Finally, I put a dvd movie in the drive and it wont recognize the disk. These functions used to work fine. The computer is only 15 months old, of course I only had a one year warranty.
Is there anyway this could be related to software or is it a hardware problem?

Hi,
First, try the automated fixit from Microsoft on the link below.
Windows 7
If it still isn't working, try the following.
Next, from the Start Menu, open the Control Panel and click on Device Manager. Next click to open DVD/CD-ROM Drives. Right click the drive and select uninstall. Do not delete drivers if asked. When the device has uninstalled click on the 'Scan for Hardware Changes' icon ( usually just below Help on the toolbar ). Let windows reinstall the drive and see if it now works.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Pavilion DV4-2161nr CD/DVD drive won't read or burn

I recently had my Hard Drive changed in my HP and the CD/DVD drive was working fine...then about a month ago the door won't open and it stopped reading every cd/dvd i put in...it won't read blanks or movies or audio cds/dvds...I also have a yellow question marke by PCI Device...CAN SOMEONE PLEASE HELP ME?

do you have the win 7 cd handy, try to boot into the discs and see whether that works, this will tell you whether that is software or hardware problem. Such failures do occur, due to ageing of laser.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

HT1338 DVD drive won't read or burn

DVD drive won't read after upgrade to mountain lion install

do you have the win 7 cd handy, try to boot into the discs and see whether that works, this will tell you whether that is software or hardware problem. Such failures do occur, due to ageing of laser.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

MBP won't read burned DVDs after Mountain Lion upgrade

Well, I think this is the last Macintosh I'll be owning. I've really had it. And now with the decision to cancel the 17" laptop, what's my inscentive to stick around?
OK, rant over. I recently upgraded to Mountain Lion. All went fine, however, I did not notice until today that the machine will no longer read my previously-burned DVDs. The machine thinks they are blank DVDs! Interesting that I can insert a movie DVD and it reads/plays fine.
Has anyine else had this problem? Is there a solution?
Thanks-

What version is Pages? If you have at least Pages 4.0.5, try deleting the preference file. Go to HD > Users > (your account) > Library > Preferences, delete the com.apple.iwork.pages.plist file & then restart Pages. In Finder, hold down the Option key while clicking on the Go menu & your user Library will appear about halfway down the list.
If you're version of Pages is older, try updating.

CD-DVD Drive won't read CD-ROM just burned -- readable on other computers

Computer: Satellite C655D-S5048
OS: Windows 7 64-bit
Software used for burning: Roxio
Burn process goes smoothly -- options set for creation of read-only disk. Disks are 700 Mb, 52x of good quality.
After having been burned, when reinsterted in the drive, the computer reads the disk as empty, and offers options on how to burn files to it.
On any other computer, the disk is readable.
Ran Toshiba Laptop Checkup -- nothing found.
Tried running cleaning disk through -- no improvement.
Thoughts?
Solved!
Go to Solution.

Peter--
Thanks! However, after spending a while on the phone with Toshiba, their tech and I came to the conclusion it might be a hardware problem. I was advised there were two separate lasers/lenses in the drive -- one for reading; one for burning. Given I was able to locate a (brand new) replacement TSST drive online for $29 plus shipping, I opted to order one -- I'll post whether that solved it or not.
As to different burn software -- the outcome was the same for Toshiba Disc Creator, Roxio, and freeware called Shampoo (I think).

Idvd won't read my quicktime video

I exported from FCP into Mpeg4 and now idvd won't read the video image on the file (even though it displays the image). the files are not copyrighted. i just need to burn onto a disk so that it can be uploaded later onto the internet. any way to fix my problem or to get around idvd?

iDVD does not work with mpeg4.
If the file is less than 4gb simply create a data DVD not a video DVD.
x

Players won't play DVD

I've seen this problem discussed a little in this forum, but hope to get some more ideas. I made a DVD containing a manual-advance slideshow with about 20 TIFF files in iDVD that plays fine in the Mac DVD Player. But it won't play in either of our two DVD players -- an old GE model and a brand-new Panasonic model. The old one just says, "This disk cannot be played." The new one shows the opening screen with the "thumbnail" of the first slide, but when you try to advance it, the player says the disk can't be played.
I found one post that said manual-advance may not work, but I haven't wasted another DVD yet to try auto advance.
Any ideas would be welcome.
eMac Mac OS X (10.3.9) 1 Ghz G4, 512MB RAM

Have you tried all the buttons on the DVD player remote?
Manual advance slides are actually chapters.
That said, it's been my experience that some DVD players won't advance the slides.
Auto advance should be OK for you.

DVD Drive Won't Read "Homemade" Data Discs

Hello! I just purchased a T500 with a regular old DVD burner (Optiarc DVD RW AD-7910S) and am having an issue with it. The problem is that it will read certain DVDs just fine (a Visual Studio DVD, for instance, worked just fine. As did a Vista Ultimate DVD). Unfortunately, other discs are not so fortunate. Anything that contains just plain old data files (such as a disc of log files, a disc with video files, etc) won't load at all. The drive will spin up, spin down, make a floppy disk reading clunking sound, and repeat the procedure.
So it seems that anything that comes from an ISO or an "official" source (Microsoft) works fine, but any time a disc was burned with Nero or the Windows burning thing(tm) it won't read at all. This doesn't apply to CDs, however, which seem to be working just fine.
Is this an easily fixable problem? Could it be a problem with the hardware? It doesn't seem like that would only stop it from reading data discs, but I'm no expert. I updated the firmware to the latest version available on the download site (actually I did that before trying any data discs, so I don't know if it was an issue with the old firmware). Is it possible that it didn't update properly or something? Would it be worth trying (or possible) to redo the firmware update or to revert to the old version to test? Forgive me if I'm sounding ignorant here.
Thanks for any insights!
P.S. I'm using Windows Vista Ultimate 64-bit, if that makes any difference to anything.

Total WAG: are your home-made data DVDs finalized? I think just about everything these days can handle mulit-session CDs, but IIRC there are some configurations that won't recognize multi-session DVDs.
Like I said, just a WAG.
Z.
Message Edited by zoltanthegypsy on 04-19-2009 05:05 PM
Message Edited by zoltanthegypsy on 04-20-2009 09:52 AM
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

MBPro won't read SL DVD - can I copy the install DVD on a PC?

My MacBook Pro won't read the SL install DVD (as others have had problems with). I have access to a PC with DVD to DVD copy ability. My question is, can I burn a copy of the install DVD to another DVD and use that copy (assuming my MB will be able to read the copy DVD)? Is this possible? Any tips on how would be much appreciated - a shame to buy the install DVD and unable to use it. Buying an external DVD drive doesn't make sense, as I plan on upgrading my MB with the year. Thanks!

My question is, can I burn a copy of the install DVD to another DVD and use that copy (assuming my MB will be able to read the copy DVD)?
I'm not sure why you think that would work. Either the disk is damaged, in which case you won't be able to magically create a good copy, or your drive is damaged, in which case it's not going to read a copy any better than the original.
Is this a new disk, or have you used it before? Is it readable in other machines? Can your Mac read other disks?

After creating a slideshow in iDVD and burning it to a blank DVD-R disk, can I later add another slideshow?

After creating a slideshow with my photos in iDVD and burning it to a bland DVD-R disk, can I used the unused space on the disk to add another slideshow at a later date?

Thanks!

16X DVDs won't read

I have a G5 PowerMac (latest version I believe). It came with a SONY DVD RW DW-U21A installed. I tried replacing it with a Memorex DVD unit to be able to use 16x DVDs. It still won't read 16x DVDs even though the Memorex DVD drive will burn an dread them just fine in a PC. Is there a special drive that I need or is it a matter of the G5 not being able to read 16x no matter what?

I think you've got the same "software fault" that's affecting a number of us at the moment.. I'm was trying to log this with Apple but I'm just out of support so they won't help.. They wont even acknowledge my question.. Search on "DVD not reading blank media" or similar..

Once the iDVD is burned, what can I delete to free up space without compromising the integrity of the dvd

Once the iDVD is burned, what can I delete to free up space? I tried deleting the iMovie events and projects, but then the iDVD would no longer play because it said the movie contents or link was not available. I was under the impression that once I saved the iDVD that the associated video was saved in that file, not a link to an iMovie event and project. Can somebody help? Now I have to find the original footage, re-edit it in iMovie, and start the whole iDVD process over because I deleted the iMovie project and events.

Hmmm, did you actually burn a DVD from the project?

Dvd players won't read iDVD 6 burned dvd...

Similar Messages

Maybe you are looking for