DVD Playing in Fast Foward After Burn

1. DVD simulates perfectly in DVDSP.
2. Put it in one dvd player and it's like it's being fast forwarded. Menu, first play, everything. Not a DVD player issue.
3. Put it in another DVD player and similar thing happens. It fast forwards part of the video and the voice gets off of the video. This is in the first play track.
Never seen this before and need help. I've done over 20 DVDs in DVDSP so I'm not a newbie.

It was a piece of video in the First Play that caused the problem. It was encoded at 6.2 MBPS while the main track was 5.0. Not sure if that was why but re-encoding that video fixed it.

Similar Messages

I made a DVD with photo's and music. On my Powerbook G4 he plays perfect. But after burning the project on my LaCie d2 lightscribe and show the project on my TV than after 10 min. the music stops for a few seconds.

I made a DVD with photo's and music. On my Powerbook G4 he plays perfect. But after burning the project on my LaCie d2 lightscribe and showing the project on my TV than: after 10 min. the music stops for a few seconds. On the screen of the DVD-player I can see that after the word 'play' the clock starts again with counting the time. I tried everything: * burning slow. * all programs stopped, except iDVD. * all other apparature uncoupled. Is this a problem of my iDVD-program or my LaCie burner?

mishmumken is correct about the 99 slides. There's an 99 chapter limit in each slideshow for DVDs and each photo is considered a chapter. iDVD gets around that by renaming slide 100 back to 1 and goes on.
The pause can be minimized (but not eliminated) by burning to disk at the slowest speed available: usually 4x or 2x. Save the project to disk (File ➙ Save to Disk menu option) and play the disk image with DVD player to check out the transition at 99 and 198. Then burn the disk image to disk with Disk Utility at the slowest speed possible. Also use top quality media: Verbatium, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

My ipod nano 6th generation plays , stops , fast foward and rewinds songs by itself. it also speaks song titles non stop even with the setting off . please help me.

my ipod nano 6th generation plays , stops , fast foward and rewinds songs by itself. it also speaks song titles non stop even with the setting off . please help me.

Found this solution in another thread, what you want to do is go into the Nike Fitness thing, go to run, go to Spoken Feedback and set it to off. This should fix your problems.

Encoded dvd sticks at sane pint after burning

I am having this annoying problem with a wedding film we are producing. After exporting my qt file as prores I take the file into compressor and use the 90 min preset and create the DVD in DVD studio pro with chapter marks and menus at this point all is fine in simulation mode, it plays fine but when i burn a DVD it sticks at the same point every time. i have tried editing the film and taking out a section of footage bit it still sticks when i burn a dvd and play in my mac or on my tv!
Could it be in the audio track or something in the video timecode?
Note i: create DVDs every week like this same workflow with no problem and even burned the DVD on another mac but same problem

Hi Allister
This may be stuff you have already tried but just in case ...you could try this if you have time.. trash (delete) all the project render files and do a full re-render .. then a new export as quicktime mov using current settings, I would then try it at each stage by burning it to DVD from inside Compressor and then if that works do all the DVD Pro fancy bits when I know it is working .. I say all this as once ..I had a sequence which stuck on any DVD player including the MAC, I had what I believe to be corrupt render files because when I trashed them and re-rendered it and created a new quickTime mov using current settings, it all worked fine ..
Jim

Encore DVD's are shakey/jumpy after burning...

I'm very new to video but I've learned just enough to be dangerous, so any constructive help is appreciated.
Projects were shot on a Nikon D300s and D90(720p, 24fps), cut up in Premiere Pro CS5 and Dynamic Linked into Encore. Using the standard NTSC, DVD defaults (didn't touch a thing), the final disc is shakey/jumpy. Looks like flickering, but the image on screen is actually changing position in what looks like the vertical plane.
Here's where it gets weird. .ncor files from my old CS4 system still burn beautifully. If I open the old project in PPro CS5 and DL to Encore, shakey discs. In the Encore Preview the project plays perfectly.
An observation I had was that the problematic timelines in Encore all had what looked like horizontal banding in the timeline "thumbnails". The previous version .ncor files have clean thumbnails.
And if it helps, my little GoPro camera burns just fine. What could be different between projects in CS4 and CS5? Is it something that Premiere is doing or Encore? Since the previews in Encore look good until you burn the disc, I'm thinking Encore is the culprit so far.
I'm sure I have left out a ton of pertinant details to help you help me, so please fire away.
Thanks
OS X 10.6.8
CS5 Production Premium fully updated
Uninstalled and reinstalled twice

Excellent.
You've provided only the initial info from mediainfo - probably using the "sheet" view. There the info you want is in the very bottom section. Here is an example. See the "Scan tyupe: interlaced" and "Scan order: Bottom Field First"? (It was an m2v, so no audio.)
Format
: MPEG Video
Format version
: Version 2
Format profile
: Main@Main
Format settings, BVOP
: Yes
Format settings, Matrix
: Default
Format settings, GOP
: M=3, N=15
Duration
: 14s 1ms
Bit rate mode
: Variable
Bit rate
: 4 108 Kbps
Nominal bit rate
: 7 000 Kbps
Width
: 720 pixels
Height
: 480 pixels
Display aspect ratio
: 4:3
Frame rate
: 29.970 fps
Standard
: NTSC
Color space
: YUV
Chroma subsampling
: 4:2:0
Bit depth
: 8 bits
Scan type
: Interlaced
Scan order
: Bottom Field First
Compression mode
: Lossy
Bits/(Pixel*Frame)
: 0.397
Stream size
: 6.86 MiB (96%)
Would it be best when using Premiere and Encore, to use Adobe media Encoder and make my video into a file, then bring that file into Encore, or does it not make any difference which way you do it as I've just been putting my timeline straight into Encore when its ready to goto DVD.
You can do it either way. But if you export, you have one more step to make sure the fields are correct. Your problem, is probably in the Premiere settings, so I would do an export from AME unless you discover you need to.

DVD plays at lower quality after building to dvd out of encore?

Hi All
I shoot DSLR HD video, edit in Premier Pro CS6, Dynamic Link to Encore CS6 where I build my dvd menu's ect. and export/build to DVD. But when playing the DVD back on a DVD player the quality seems quit lower than the original footage as well as softer, almost as if a soft focus was applied. When the subject or person in the video makes fast moments there seems to be motion blurr as well even when I shoot at faster shutter speeds.
I know I can get way better output quality but can't seem to it done.
PLEASE HELP!!!!

Hi Ann,
As true as your statement is, would it not then render a good quality 720x480 DVD format, even by DVD standards as your parent file was 1920x1080p. When I look at other DVD's shot and edited the same way as mine I still see a big quality difference, theirs being better render than mine.
Then you look at a DVD that you would rent from your local DVD shop, the qualities great. Even the indie films made on a low budget and DSLR's or season 5 of House
(that to my knowledge was also shot with Canon 5D's) the qualities excellent. How do they manage to scale down to 720x480 but still keep the quality?

After burned to dvd the edge are cut off in my tv screen. looks like zoomed

hi
i am FCPX user. i create my project using format (resolution )as showed on the pic below
after burned to dvd the edge are cut off on my tv screen. looks like zoomed as showed in the pic below.
thanks for taking ur time to help me!!
then i export using master file as
showed on pic below
and after i burn on to dvd my edge are cut off. here pic trying to show before burn on my mac and after burned on to dvd
before burned on to dvd on my iMac screen
AFTER BURNED ON TO DVD ON MY TV SCREEN
i really need ur help thanks
after burned to dvd the edge are cut off in my tv screen. looks like zoomed

Thanks Alchroma
i used this dvd burner just incase..
but i thought i might have wrong settings from begning.
do u thinik this setting is alright when creating DVD
Alchroma wrote:
That thought jumped into my head as well.
If the Safe Area settings are OK then it's well a settings issue in either the DVD player or TV or both.
Al
Alchroma wrote:
That thought jumped into my head as well.
If the Safe Area settings are OK then it's well a settings issue in either the DVD player or TV or both.
Al
thanks again

After burning a DVD one or more of the scenes wont play?

Adobe Premier 11 - After burning a DVD one or more of the scenes wont play, the scene is showing and highlights but wont play...this has only recently just started to happen. I thought it may have been the physical DVD disk issue, but have tried others and same thing is occuring?

Does iTunes let you burn CDs even though you have installed iTunes 8? There are many users - me included - who have lost the ability to burn CDs after we installed iTunes 8. I am curious to learn what may be different about your settings versus those of us who are being adversely impacted. Do you know what the UpperFilters and LowerFilters are in your registry for disc burning?
Thank you.

After burning DVD, DVD player cannot play main menu

Hi all,
I created a project with a main menu with several links to submenus in Encore. When i take a preview it all looks great. However after burning the DVD, the DVD reader is unable to lanch the CD to it's master main menu (set as first play) and after a long time searching, it starts one of the submenus. There i have a link back to the main menu, but it doesn't seem to work.
I tried this on several DVD players but all has the same problem. I also create a DVD folder on HD, there it works.
I'm pretty sure my DVD burner works fine. Could it be that Encore is using too heavy compression (the avi file is 29Gig and fits on 1 DVD) that can not be use for let's say cheaper version of DVD players? (2 years old).
If not, any other idea where the problem could be ??
Tx

Hi Harm,
you were absolutely right. I was either suspecting the large avi file to be to heavily compressed or my dvd burner but NO...i just bought some TDK 16 DVD-R and the whole thing was solved. Saves me a lot of trouble, no new DVD-R, no new software.... tx mate :)
ps do you know any gud site where i can found some good audio samples which can be used for DVD menus?

After burning to dvd, using idvd, movie stops on frame but audio continues

After creating imovie which works perfectly, and also after trasferring to idvd works perfectly, i have problems when playing back dvd after burning to disc. The movie stops but the audio continues. I altered the clip but same thing happened in next clip after next burn. I don't think its a corrupt clip, but maybe something to do with WHEN it occurs in the movie. Any suggestions? After 4 goes and many hours burning I am stumped!

Hi Tomma1
And welcome to apple discussions. It's good you chose to use 16 bit audio for all of your source material. And assuming this is accurate info .... From what I can tell, you are doing nearly everything correctly. However let me ask you a few questions.
1. Are you using the boot volume (the hard drive where iDvd and Leopard are actually located) to encode your dvd (yes/no)?
2. More importantly, does the disc image also go out of sync when played thru apple's dvd player app? or does it only happen on the burned dvd-r?
3. Are you using Verbatim Dvd-R or an alternate brand? if it's the latter, then for troubleshooting purposes while on this forum; please use Verbatim Dvd-R. (it helps us eliminate additional / possible variables). Thereafter feel free to use the media that works best for you and your mac.
4. Have you tried an alternate encoding setting other than pro quality setting? and do you get the same results?

After burning 3 dvds, got error 0x80020022 on MATSHITA DVD-R   UJ-845 Drive. Used 1x speed. iMac G5 PowerPC

MATSHITA DVD-R   UJ-845:
Error message: 0x80020022.
Got this after burning 5 other discs. Two of which didn't burn and ejected. When I inserted them again, they did not appear on desktop. Had to use Disc Utility to eject them.   After those two issues, this message showed up when re-trying the burn process.
What must I do to get this drive to burn the discs?

Thanks for the info. I have another question pertaining to your answer: "What speed would be best to use so the drive doesn't become HOT--- lowest speed for a longer period of time. . . OR . . . at a faster speed for a lesser time?
Also, I tried using it half-hour later and got same result. I then waited 1 hour longer and it worked then.
Thanks to all letting me know to cool it off!

Video hangs after burning on a DVD

Hi,
after burning a project with menus and several chapters, I notice the DVD is hanging after a few chapters. My DVD burner itself should be ok, I got no hardware failures and it's working fine with Nero Burning ROM. Any suggestions??
Tx a lot,
Kristof

You used iTunes to burn the CD? If so, it should work. The question is, did you choose "back up to disc," or did you create a playlist, and choose "Burn playlist to disc?"
If you do it the first way, you are just saving the actual music files (not in CD format) to a CD.
If you create playlist and burn playlist to disc, you are making an actual Audio CD that will play in any CD player.
If you are already using the second method, are you using a CD-R, or CD-RW? Some players have problems w/RW's.
Btw, iTunes songs are not MP3 format, so I don't think you'll be able to find a "converter." LOL

After burning CD, won't play

After burning a CD on my Emac, it will not play on another device. I receive the "ding" letting me know that it burned OK. Am I missing a step after the "ding"? Am I burning incorrectly? Thanks for any help you can give.

awsmith,
Welcome to the Apple Discussions!
Can you provide a little more information? What kind of file(s) did you burn, and on what device are you trying to play the CD? Does the other device recognize the CD and fail to open the files, or is the CD not seen at all?
You may also want to try another blank CD, especially one from a different spindle or package of discs. Blank CDs can degrade over time, especially in less-than-ideal strorage conditions (see the NIST document Care and Handling of CDs and DVDs), and some brands and batches of blank discs are markedly less quality than others (while written in terms of DVD discs, the manufacturer rankings in Blank DVD Media Quality Guide are useful).

Unable to select individual chapters after burning to DVD.

I created a wedding DVD with six different chapters in IDVD. Five are videos and one is a slide show. After burning the disc everything seemed fine except I am unable to select the chapters in my DVD player. Is this because I used a DVD+R DL for the blank media instead of a DVD-R DL? I had to use a DL disc because of the size.

Hi
You are familiar with the - long going - iDVD BUG !
This been hunting us in several versions - and never been corrected.
To set it of - You make a movie in iMovie or FinalCut - With Chapters
Import it into a new project in iDVD
You see something in need of correcting
Return to Video-editing program (application)
When back in iDVD - it will notice and ask You to either
• Up-Date - or
• Cancel
NON WILL WORK
Resulting DVD if made will
• Play movie OK
• All Chapters (Sceen Selections) - WILL START AS Chapter ONE !
Medicine:
• In iDVD Trash old movie - AND - Clear iDVD Assets - OR -
• I favor - Create a Brand New iDVD PROJECT - and do not go back if not very important
Yours Bengt W

Bad quallity film after burning dvd with idvdv professional quality.

After making a movie in imovie and importing it in idvdv the quality is still HD
after burning a dvd with professional quality the quatity of the dvdv is very poor. Horizontal lines are dancing over the screen!!
Can anyone tell me wat is going on???

Keep in mind that all Dvd's burned through your mac and are playable on your mac as well as your set top DVD player are ALWAYS standard definition /SD. There is no way around this (that is if your intentions is for playback on most computers and most set top Dvd Players.
One of the limiting factors is apple's dvd player app. It isn't fully blu-ray compatible yet. Meaning that even if you did burn a high def. Dvd which is only playble on Sony's PS3 and most set top Blu-ray players .... the finished Dvd won't play on your mac since apple has yet to update/upgrade their DVD Player application to fully incorporate Blu-ray standards. To the best of my knowledge, apple's support is very limited here. Hence the alternative for mac users is to use Roxio Toast's Blu-ray plug in as well as Toast Blu-ray player. If you opt to go high def through Toast then the completed Dvd will NOT play on most set top dvd players but will on most Blu-ray Players as well as Sony's PS3.
Hope this advice helps but if not just come on back.
Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software / products that may be mentioned in this topic. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information above at your own discretion.
Message was edited by: SDMacuser

DVD Playing in Fast Foward After Burn

Similar Messages

Maybe you are looking for