DVD plays on 4:3 screen and a 16:9 screen

I have a QT file that is DVCPRO HD (720p60) DImensions: 1280X720.
I'd like to burn a DVD that plays on a 4:3 TV (with black bars on bottom and top) and then it fills the screen (for 16:9).
How do I do this?
THanks!

In DVD studio Pro, under inspector, I checked "16:9 letterbox" this did the trick

Similar Messages

Finished DVD plays (shows) complete green screen instead of movie for part of the movie

In Premiere CS4 the movie I made plays fine. In Encore timeline the movie plays fine. Yet when the DVD is burned and then played, part of the movie just shows up as completely green on the screen and then it will stop and the rest of the movie will play fine for a while and then the screen will go all green again. Any ideas of what I am doing wrong?

Lots more information is needed
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below
For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
For Mac http://mediainfo.massanti.com/
http://blogs.adobe.com/premiereprotraining/2011/02/red-yellow-and-green-render-bars.html
Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project
More information needed for someone to help http://forums.adobe.com/thread/416679
Some is general about your computer and OS, some is specific to video editing
Build a Configuration file http://www.piriform.com/speccy
Brand/Model Computer (or Brand/Model Motherboard if self-built)
How much system memory you have installed, such as 2Gig or ???
Operating System version, such as Win7 64bit Pro... or whatevevr
-including your security settings, such as are YOU the Administrator
-and have you tried to RIGHT click the program Icon and then select
-the Run as Administrator option (for Windows, not sure about Mac)
Your Firewall settings and brand of anti-virus are you running
Brand/Model graphics card, sush as ATI "xxxx" or nVidia "xxxx"
-or the brand/model graphics chip if on the motherboard
-and the exact driver version for the above graphics card/chip
-and how much video memory you have on your graphics card
Brand/Model sound card, or sound "chip" name on Motherboard
-and the exact driver version for the above sound card/chip
Size(s) and configuration of your hard drive(s)... example below
-and how much FREE space is available on each drive (in Windows
-you RIGHT click the drive letter while using Windows Explorer
-and then select the Properties option to see used/free space)
Windows Indexing is BAD http://forums.adobe.com/thread/676303
While in Properties, be sure you have drive indexing set OFF
-for the drive, and for all directories, to improve performance
Some/Much of the above are available by going to the Windows
Control Panel and then the Hardware option (Win7 option name)
OR Control Panel--System--Hardware Tab--Device Manager for WinXP
And the EXACT type and size of file that is causing you problems
-for pictures, that includes the camera used and the pixel dimensions
Plus Video-Specific Information http://forums.adobe.com/thread/459220
Read Bill Hunt on editing a VOB/MPG file http://forums.adobe.com/thread/464549
Edit Vob http://premierepro.wikia.com/wiki/FAQ:How_do_I_import_VOB_files_/_edit_a_DVD%3F
Read Hunt on Using MOD/TOD files http://forums.adobe.com/thread/699990
Work through all of the steps (ideas) listed at http://forums.adobe.com/thread/459220
If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section at the troubleshooting link
Also read file troubleshooting http://kb2.adobe.com/cps/407/kb407928.html
Reset Corrupted Preferences = Press/HOLD Ctrl+Alt+Shift while starting program

HT1657 Downloaded 2 rentals and they won't play. They ask if I would like to begin the rental period, I say yes and it takes me to the dvd screen, but does not play. I hit play, fast forward, skip chapters and nothing.

Downloaded 2 rentals and they won't play. They ask if I would like to begin the rental period, I say yes and it takes me to the dvd screen, but does not play. I hit play, fast forward, skip chapters and nothing.

I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items.

I have apple TV, an aux DVD drive, 2 new flat screen TVs, and apparently watching a DVD with apple devices is beyond their technology... highly upset

I have apple TV, and apple aux dvd drive, 2 new flat screens, $5,000 worth of hardware and facy technology that apparently will not play a freaking movie... please tell me this isnt true..

With the amount of information you've provided it's impossible to offer a potential solution. We can't see your computer so we need to know the details of your problem and setup, i.e.:
what version of iDVD are you using?
what system version are you running?
how did you create the DVD disk you're trying to play?
what fixes have you tried?
how much free space on your boot drive?
Did you follow this recommended workflow:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

When I have video clips on my timeline, they do not play in the monitor screen. I hear the sound track but can not see the image. To test if my new files are somehow the problem, I went back and used video files that I used successfully a year ago, and th

When I have video clips on my timeline, they do not play in the monitor screen. I hear the sound track but can not see the image. To test if my new files are somehow the problem, I went back and used video files that I used successfully a year ago, and they no longer play in the monitor window. I hear the sound track, but do not see any video. Have I changed some setting that controls video playback in the monitor window?

Randy Ruttger
Thanks for the follow up.
Missing in this equation were the version of Premiere Elements that you were using and the computer operating system on which it was running. But...
The deed is done. But.....Until now and after you went ahead and moved to version 12, we now learn what version of Premiere Elements you were using. We still do not know the computer operating system involved.
You just said Premiere Elements 10. Premiere Elements 10 is hit by a serious known display issue if the computer uses a NVIDIA GeForce video card/graphics card. In this issue, the only remedy is to roll back the driver version to about May 2013. The description of the problem and how to do the roll back are described in one of the Announcements at the top of this forum. What video card/graphics card does your computer use?
On another front, Adobe will be releasing a new version of Premiere Elements any day now. No one but Adobe knows the feature set for the new version. That type of information is announced at the moment of release of the new version.
So the remedy to the problem that you presented in this thread could have been...
1. Rolling back the NVIDIA GeForce driver version to about May 2013 if possible (Windows 8 or 8.1 64 bit, may not be possible)
2. Move to another version of Premiere Elements (which you did)
I offer the above for consideration so that you can review your decisions. We are pleased to learn that Premiere Elements 12/12.1 works for you.
Please do not hesitate to ask questions and ask for clarifications, but remember that the answers are in the details.
Best wishes,
ATR

MacBook Air connected to projector won't display dvd in superdrive, but plays on macBook Air screen.

MacBook Air connected to projector won't display the dvd in the superdrive, but it is playing on the MacBook Air screen.
When dvd is ejected, MB A screen appears on the big screen through the projector. What do I need to do to get the training dvd showing on the screen?
Thanks

Power off the router. Unplug it from the wall. Wait a while.
Plug it back to the wall. Power the router on. Wait until all the lights are lit properly. It will take a while.
Restart the computer.
Start up in Safe Mode.
http://support.apple.com/kb/PH11212?viewlocale=en_US
Deselect proxies if selected.
System Preference > Network > Advanced > Proxies Tab
Uncheck “Auto Proxy Discovery”.
Click OK, Apply.

IMac will not play the DVD that I have made on imovie and burned on iMac SuperDrive ?? (DVD plays fine on household DVD player and also play fine in Toshiba laptop ) Why not on the iMac - anyone know???

iMac will not play the DVD that I have made on imovie and burned on iMac SuperDrive ?? (DVD plays fine on household DVD player and also plays fine on Toshiba laptop ) Why not on the iMac - anyone know???

There are many reasons this could be the case but whether an optical disc can be read or not is a function of:
The reflective media layer of the disc
Whether the burned disc was a DVD-R, DVD+R, DVD-RW, DVD+RW
The brand, model, and production lot of the disc
The specific frequency of the Write lasers that burned the disc
The specific frequency of the Read lasers that are attempting to read the disc
Are the Read lasers in the drive working (it is common for one set of lasers in a drive to fail while others continue to work)
How old are the Write and Read drives (laser frequencies change with age)
Is there dust on the read laser
Is there dust on the read lens
etc.
At one time it was estimated that fewer than 80% of all burned discs were readable in 90% of the drives. That has, I believe improved over time but at the same time it seems the faillure rate of lasers in the drives has increased but that may simply be the result of how many different read and write lasers there are in today's superdrives. Fortunately todays drives are a lot less expensive the replace -- now that Apple no longer installs optical drives in their computers.

My DVD plays on my Mac and new BluRay player, but not on my TV

I burned a DVD with three mp4 movies. The movies play fine in QuickTime, and the DVD plays without a problem on my Mac. It also plays correctly on a newer BluRay player. However, when I try to play the DVD on an older DVD player (about 3 years old), I have problems. The DVD starts OK, and I can navigate the menu choices. However, I find that after about a minute, the player simply freezes, and I can't play or change anything. I tried burning a new DVD with a different format, but the same thing happened. I think the problem might just be that my DVD player is too old, but I wondered if there is a setting in iDVD to be compatible with older players. Any help would be appreciated!

I tried burning a new DVD with a different format
I'm not sure you mean because ALL video DVDs are in multiplexed MPG-2 format.
I suspect your set-top DVD player doesn't 'like' writable' media (it used to be fairly common). You might try using a DVD cleaning disc in case there is any dust over the player optical system.

Slideshow - save to macbook pro to DVD to play on non-Apple computer and DVD (TV)

I have tried to save a slideshow (with music) made in iPhoto to MacBookPro to then save to a DVD to play on Non-Apple computer AND to play on TV (DVD). It acts like it is saving but then .mov won't play even on MY Macbookpro. What am I doing WRONG?

This is supposed to happen, licensing issue mean that Apple can't AirPlay protected content to other devices. You might try VLC instead of Apples built in DVD player.

I was making a movie on iMovie, and was trying to use the green screen to make a split screen. I pressed on the green screen button, but the second clip didn't play next to the first, and only the audio played.

I was making a movie on iMovie, and was trying to use the green screen to make a split screen. I pressed on the green screen button, but the second clip didn't play next to the first, and only the audio played. I tried again with some different clips and some worked and some didn't. This hasn't happened before. What should I do? (I am using iMovie '09)

No guarantess but try smc and pram resets,

Imported video from imovie, when i try to play only have audio, screen is red and flickering

imported video from imovie, when i try to play only have audio, screen is red and flickering. new mac pro.

steved
Thanks for the reply with additional details.
In order to help you with the Elements Organizer 13 and Premiere Elements 13 issues, we need details of that video from iMovie.
You should be able to get the important details of the iMovie video by telling us the export settings that you used for the iMovie export.
Minimum information..
Video Compression
Audio Compression
File Extension
Frame Size
First, update Premiere Elements 13 and Elements Organizer 13 each to the 13.1 Update (See Help Menu/Update in an opened
Premiere Elements 13 project.)
We will be watching for further details in order to plan and carry out troubleshooting strategy.
Thank you.
ATR.

Plays fine in IMOVIE and IDVD but disk doesn't play right in home DVD Playe

I created a movie in IMovie and it plays fine there. I converted it to IDVD and it plays fine there, but when I burn the actual DVD, it takes 12 hours! and then it won't play on my home DVD player. (It starts out fine, shows the menu and has the movie, but halfway through it freezes. Or if I try to fast forward to skip to the next chapter it freezes.
I tried upgrading my Superdrive to the new Pioneer 111D (it was suggested to me that my older 103 was not compatible with Panther) and still the same problem.
I am noticing now that when I go to check my system profiler, it's now saying for the new Pioneer 111D that "disc burning is NOT supported".
I'm in the midst of a project and feeling pretty screwed. HELP!

First of all, I'm appreciating all the responses and help. This is a serious concern for me which I need to find a solution for asap.
As far as the media itself... the discs are TDK DVD- and I've ruined about 4 or 5 of them... each having the same problem...taking 12 hours to burn they play for awhile on a commercial DVD player then freezes up about 2/3rds the way through (unless you try to scan through, in which case it freezes up on the spot.) There are a total of 3 scenes... and the 3rd scene doesn't happen at all in the final burned disc. So, J.Keller, as much as I'd love to blame the media I don't think I can. But it's certainly a reasonable explanation.
Karsten, I have to tell you the thought that it might actually take LONGER to butn this disc is painful. It's actually only 45 minutes or so of material. But if I knew that it would take 24 hours but it would work perfectly I'd go for it! I will download the patch you recommend to see if it offers a workaround solution.
But I'm still perplexed that in the SYSTEM PROFILER for the Pioneer 111D it says that "burning is NOT supported". Should I be concerned about this?
At this point I'll try just about anything. So if J Keller thinks that by waving a dead chicken over my head while singing dixie would help create a workable DVD so I can finish this project for my boss, I'd give it a try.
Any other thoughts? I really appreciating the insights and suggestions.

I need to know how to fix my iphone4 I was playing one of my games and a up date poped up and i push it to up date my phone. When it restarted all I have is a white screen and four black dots and all the driffent laughes I can not make any or get any call

I need to know how to fix my iphone4 I was playing one of my games and a up date poped up I pushed on the up date when it restarted all I have is a white screen with four black dots and all the driffent laughes and a i with a blue circle around it I can not make any calls or get any calls or any thing

I don't have apps on my phone so i can;t do anything

TV/DVD Combi DVD plays in black and white

I have a TV/DVD Combi 32DV502B. The TV is fine but when I press source on the remote and select DVD mode it comes up in black and white and the DVD plays in black and white. The only cables that come out of the TV are power and aerial cables. Can anybody help

That doesn't appear to be a US model, and this is the forums for Toshiba USA. You may want to contact Toshiba in your region.
- Peter

Playing Burned DVD's - some work, some stop and pixelate

I created my first DVD project with Final Cut Pro and finished it in DVD Studio Pro. I played it on my 2004 Panasonic DVD player without a problem, but when I sent it to family and friends many of them said there was chatter and sometimes it hung up and would not play right. I am trying to figure out if there is a specific DVD to use or is it formatting (DVD-R, or DVD+R) or are there settings I am missing in DVD Studio Pro that I should be using?

Hi Setla,
And welcome to the forum. If it looks fine on your set top box and you used the same media as the disks you sent to your friends. Then I would drop the encoding bit rate and / or convert your audio to dolby (if thats applicable). Compressor checks for a maximum bit rate on build but that doesn't necessarily mean all players will be able to handle this (stacks of variables). My first choice would be to convert the audio and then if need be attack the video.
When making DVD's I would also recommend using something like Toast as this will go through a verify cycle which should rule out any dodgy media or writes.
Enjoy.

DVD plays on 4:3 screen and a 16:9 screen

Similar Messages

Maybe you are looking for