Dvd plays on iMac, but not on TV?

Made short iMovie from movie clips, then to iDvd. Disc will play back through my G5 iMac but my stand alone player will not accept it to play through my HDtv. Would like to play it thru the TV. Any suggestions?
Jack

Thanks Shippey: Nothing unusual that I'm aware, but I don't do much with clips. These were made with a Nikon Coolpix. All my DVD' originate as still images, but these little clips are my daughters dog, and the dog is ill, so want a little record for her of the dog barking. Fortunately as I mentioned, the disc will play on my computer, but won't even load on the stand alone player for TV.
BTW, the movie has a theme and title at beginning and end but no sound except what was recorded on the clips.

Similar Messages

DVD Studio Pro Authored DVD plays on iMac, but not PC or DVD Player

Have put several film up on web using FCP. Trying to make DVD of movies using DVD Studio Pro. The DVD plays on my iMac, but not my PC or my DVD player. Any suggestions?

Pop your disc into your Mac. On the disc there should be two folders, VIDEO_TS and AUDIO_TS. If the VIDEO_TS folder is not there, replaced by something else, then you have indeed created a HD DVD. You need to completely start over.

Created project in PE4, burned to DVD - plays on Computer but not on DVD Player.

Created project in PE4, burned to DVD - plays on Computer but not on DVD Player.
Vista Ultimate
Let me know what other info you need.
Thanks for your help.

Yes, the lowest possible Burn speed will be a step in the direction of compatibility.
As for the Quality setting, Robert Johnson has done tests on various versions of PE and has recommend a setting of about 7.8 (IIRC). Unlike Encore, where one has many more choices, PE limits one to a Quality setting of 8. This is about equivilent to the recommend 7MB/s in Encore. Robert found that just below the 8 max. actually yielded slightly better results, than did the full 8, on his tests.
The three things that help to insure the greatest compatibility with set-top players are, and in pretty much this order:
1.) Quality media - Verbatim, Taiyo Yuden or Falcon (US only)
2.) Burn speed (slower is better. It might take a few minutes more, but if it works, you don't have returns or have to do it again.)
3.) Bit-rate around 7MB/sec
Remember - no set-top player HAS to play any Burned DVD. Most do, but some just do not - only replicated, pressed discs. Also, some player are still sensitive to the -R and +R media types. This is less a problem with newer units, however it still could be an issue with many older ones.
Personally, I test a "master" on four different players, plus my computer, before I Burn a batch, or ship out any. One unit is a very high-end Marantz, another is a mid-level Marantz, one is an RCA "el cheapo" and the other is an older Pioneer. I figure if the disc plays everywhere, there is a good chance that it will play for the client - though there are still no guarantees.
Good luck,
Hunt

DVD Burned from iDVD 6.0.1 plays on iMac but not a DVD player?

After burning a DVD production on DVD-RW and DVD+RW CDs and both directly from iDVD and by first creating a disc image. In all cases they worked on my iMac but none of them worked on the DVD player. Only the DVD+RW is compatible with the player and it appears the DVD starts to load but can not finish the process. Is there something I missed or is there a bug in iDVD 6.0.1?
The iDVD production was made from scratch using Magic iDVD and some video files. The Map has no errors and there where no error messages.

Is there something I missed or is there a bug in iDVD 6.0.1?
The bug is probably the format you're burning to...
Use DVD-R. I'd recommend Verbatim DVD-R burned at 4x or slower. I'll bet that will play just fine...as long as the DVD player is relatively new (2-3 years old).

Dvd plays on players but not on computers

I really don't understand the following issue: After I burn a disk image created with idvd in toast 6 (disk utilities can't seem to burn it properly) I am able to play the dvd on regular dvd players, but not on any of my computers. Why? (The "play on both PC and Mac is selected)

Hi mieke,
that is indeed strange because to make a .img of a video-dvd run on dvd standalones, you have to choose in Toast "data"+"dvd rom udf".... and NOT PC+Mac.... (???)
you don't want to create a datadisk, but a videoDVD, which has very different file structure/format then computer disks........
....... only advice I can give: try again, with settings mentioned above...
hope this answer could be helpful........

Burned dvd plays on Mac but not on player

my burned dvd plays on my Mac with no problems but on my dvd player, it just stops after 3 few seconds. any ideas what happened there?
i used iDvd 4

Welcome to the Forum.
The most likely reason for consumer DVD players to skip or stop on DVDs that play well in computer DVD drives, are excessive burn errors that the consumer players 'choke on'. All burned media (CD and DVD) has burn errors. Burning at lower speeds tends to reduce the error level, hence the recommendation to burn low-speed media for maximum player compatability. Computer DVD drives have a high level of error correction (after all - you wouldn't want to loose any data on a data DVD) and can handle the errors. Consumer DVD players don't - after all they are designed to playback pressed DVDs with low error rates.
Some consumer DVD players are more sensitive to these errors than others.
Sometimes using a different brand of media will help.

Burned dvd plays on computers, but not dvd players - help?

Hi,
I'm a noobie. I made a movie in final cut pro 5, then converted it to a quicktime movie, then saved it in idvd. The movie plays on all computers, but it's not recognized by dvd players connected to tv's. My questions are:
1. What's a quick way to burn onto a dvd that will be recognized by dvd players that aren't on computers?
2. What's the best way to save the best quality of my final cut movie to a dvd that I can play anywhere?
thanks!

Hi Noob:
Welcome to discussions!
There is no sure-fired way to record to a DVD that every DVD player will recognize. Just too many of them out there.
Try burning a the lowest speed possible (1x to 4x )using a reliable disk like Verbatim DVD-R.
This is worth reading: (I copied it from one of Len Goff's discussion threads...)
Suggest you create a disc image and then burn the DVD. File/Save As Disc Image...
http://docs.info.apple.com/article.html?artnum=164927
This will isolate any encoding/burning issues you may encounter. Once the disc image is created, double-click the .img and burn the virtual disc that should appear on your desktop, using Toast to burn the DVD. Disk Utility to burn the .img file. Usually, you can select a burning speed in Disk Utility.
There are variations to this process based on which OS X you are using...
Open Disk Utility (in Utilities folder in Applications folder), click on the virtual disc (maybe the .img) in the left-hand window. Click the Burn icon. A new window should drop down and your SuperDrive tray will open after clicking the Burn icon. Insert a recordable DVD. (Verbatim DVD-R preferred by me.) Click the Close button. Wait. Select a burn speed. Then click the Burn button.
-->If the virtual disk selection won't allow you to click the Burn icon, use the .img file instead. This may have changed in 10.3.9 and did change in Tiger.
Also, you can use DVD Player to play the virtual disk to check your iDVD project before burning to DVD. Launch DVD Player. File/Open VIDEO_TS (Open DVD Media... in Player 4.6). Find the VIDEO_TS folder and open that. (The audio folder is for DVD-Audio disks.)
http://docs.info.apple.com/article.html?artnum=93006
:)Sue

After using video capture device to copy VHS to DVD, burnt DVD will play on computer but not

After using video capture device to copy VHS to DVD, burnt DVD will play on computer but not on DVD player. Tech support for the VCD said my HP DVD burning software has to burn "DVD Video and not DVD data" and to check with HP. How can i check myself.

Grahamster, welcome to the forum.
I recommend trying CDBurnerXP for burning video CD's. I have been using it for years without a glitch. I use it mainly for burning ISO's, but have used it for all types. Please let us know if it works or not.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Music video plays in itunes but not on ipod

hi
like my subject line states, i transferred a whole bunch of music videos off of dvd into mp4 format using videora.
they play in itunes but not on my ipod.
i transferred about 400 or so at the same time to ipod do you think that's why most of them won't play ?
should i do it one by one ?
thanks.

it's more than just the mp4 format. They need to be encoded correctly with the right dimensions and other attributes as well. I don't bother with this sort of thing right now. If there is anyone who has these specs, just post them here. Otherwise, you can always google them or search these boards for the proper format/size/encoding.

How do I connect to Net Flix? I put in my user name and password which work fine with my iMac but not on my Apple TV?

How do I connect to Net Flix? I put in my user name and password which work fine with my iMac but not on my Apple TV?

Can you give me a screenshot of the User Accounts window in Control Panel?
Please create a screenshot by following the guide mentioned at [[How do I create a screenshot of my problem?]].
Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. You really help us to visualize the problem.

How can I move movies from my computer to my iPad? They will play in quicktime but not iTunes

How can I move movies from my computer to my iPad? They will play with quicktime but not iTunes so I can't sync them

Th AVPlayerHD works well for playing other video types. You can transfer the videos via USB in the app tab in iTunes on your computer. When you open that tab when you have you iPad connected to the computer scroll down and you will see apps listed on the left and a blank on the right. Click on the app and then click on the add button under the blank window on the right. Then navigate to the video you want to play and it will transfer it to the iPad. I have about 14 movies on mine using AVPlayerHD. works very well. Also have VLC player (before it was yanked from the app store). Works about the same.
You can also get the app Air Video and stream the video to from your computer to the iPad, and even have Theo ad connected to the tv to watch on there. I do that all the time with my iPhone. Saves time with not having to sync movies all the time.

I am trying to save a mp3 file but firefox does not allow me to save it...it allows me to play the file but not download and asave it to my computer. How do I enable it to save mp3 files on my computer?

I am trying to save a mp3 file but firefox does not allow me to save it...it allows me to play the file but not download and asave it to my computer. How do I enable Firefox to save mp3 files on my computer?

Go to Options>Applications tab > search MPEG Layer 3 audio(audio/mpeg) > use "Save File" option on drop down menu.

My Mac Mini doesn't recognize my Avengers DVD--it keeps saying "Supported disc not available." I've tried other DVD's which work, but not this one. itunes and everything else has been updated to the newest versions. Help?

My Mac Mini doesn't recognize my Avengers DVD--it keeps saying "Supported disc not available." I've tried other DVD's which work, but not this one. itunes and everything else has been updated to the newest versions. Help? Also...It doesn't recognize the digital copy DVD.

I have ALL the exact same symptoms as on my home computer.
It sure sounds to me like something on the iPod is broken. If it's under warranty then I would send it back for repair. If not, check out some of the web repair services, such as iPodResQ etc.

ITunes purchased song plays in iTunes but not on iPod

I have purchased several songs from the music store. One of the songs will play in iTunes but not on my iPod. I've removed the song several times from the iPod and resynced with iTunes, but the song still cuts out in the middle of the song. What should I do?

If it's just a problem with that song, I would contact the customer service who may authorize another download.
http://www.apple.com/support/itunes/store/download/#form

Trying to connect my iMac to on 10.8.2 with PowerBook Intel on 10.5.8; sharing works from PowerBook to iMac but not the other way around. Why?

Trying to connect my iMac to on 10.8.2 with PowerBook Intel on 10.5.8; sharing works from PowerBook to iMac but not the other way around. Why?

Thanks for the interest. Preferences are similar on both machines: screen sharing, file sharing, printer sharing & scanner sharing all ticked and radio button for Screen Sharing is ON.
My confusion is that I can get a network connection to the iMac by selecting "go to server" on the PowerMac running 10.5.8 but am unable to make the iMac connect to the PowerMac using similar selections. When ethernet cable is plugged in the PowerMac shows up on the finder bar on the iMac, but it does not allow either screen sharing or connection to occur - a dialog box tells me to check System Prefs and Network connection.
I'm hoping to export a large file of photos from iPhoto on my iMac to my wife's PowerMac and hoped to achieve this with an ethernet network connection.

Dvd plays on iMac, but not on TV?

Similar Messages

Maybe you are looking for