Dvd plays on players but not on computers

I really don't understand the following issue: After I burn a disk image created with idvd in toast 6 (disk utilities can't seem to burn it properly) I am able to play the dvd on regular dvd players, but not on any of my computers. Why? (The "play on both PC and Mac is selected)

Hi mieke,
that is indeed strange because to make a .img of a video-dvd run on dvd standalones, you have to choose in Toast "data"+"dvd rom udf".... and NOT PC+Mac.... (???)
you don't want to create a datadisk, but a videoDVD, which has very different file structure/format then computer disks........
....... only advice I can give: try again, with settings mentioned above...
hope this answer could be helpful........

Similar Messages

Created project in PE4, burned to DVD - plays on Computer but not on DVD Player.

Created project in PE4, burned to DVD - plays on Computer but not on DVD Player.
Vista Ultimate
Let me know what other info you need.
Thanks for your help.

Yes, the lowest possible Burn speed will be a step in the direction of compatibility.
As for the Quality setting, Robert Johnson has done tests on various versions of PE and has recommend a setting of about 7.8 (IIRC). Unlike Encore, where one has many more choices, PE limits one to a Quality setting of 8. This is about equivilent to the recommend 7MB/s in Encore. Robert found that just below the 8 max. actually yielded slightly better results, than did the full 8, on his tests.
The three things that help to insure the greatest compatibility with set-top players are, and in pretty much this order:
1.) Quality media - Verbatim, Taiyo Yuden or Falcon (US only)
2.) Burn speed (slower is better. It might take a few minutes more, but if it works, you don't have returns or have to do it again.)
3.) Bit-rate around 7MB/sec
Remember - no set-top player HAS to play any Burned DVD. Most do, but some just do not - only replicated, pressed discs. Also, some player are still sensitive to the -R and +R media types. This is less a problem with newer units, however it still could be an issue with many older ones.
Personally, I test a "master" on four different players, plus my computer, before I Burn a batch, or ship out any. One unit is a very high-end Marantz, another is a mid-level Marantz, one is an RCA "el cheapo" and the other is an older Pioneer. I figure if the disc plays everywhere, there is a good chance that it will play for the client - though there are still no guarantees.
Good luck,
Hunt

Burned dvd plays on Mac but not on player

my burned dvd plays on my Mac with no problems but on my dvd player, it just stops after 3 few seconds. any ideas what happened there?
i used iDvd 4

Welcome to the Forum.
The most likely reason for consumer DVD players to skip or stop on DVDs that play well in computer DVD drives, are excessive burn errors that the consumer players 'choke on'. All burned media (CD and DVD) has burn errors. Burning at lower speeds tends to reduce the error level, hence the recommendation to burn low-speed media for maximum player compatability. Computer DVD drives have a high level of error correction (after all - you wouldn't want to loose any data on a data DVD) and can handle the errors. Consumer DVD players don't - after all they are designed to playback pressed DVDs with low error rates.
Some consumer DVD players are more sensitive to these errors than others.
Sometimes using a different brand of media will help.

DVD Studio Pro Authored DVD plays on iMac, but not PC or DVD Player

Have put several film up on web using FCP. Trying to make DVD of movies using DVD Studio Pro. The DVD plays on my iMac, but not my PC or my DVD player. Any suggestions?

Pop your disc into your Mac. On the disc there should be two folders, VIDEO_TS and AUDIO_TS. If the VIDEO_TS folder is not there, replaced by something else, then you have indeed created a HD DVD. You need to completely start over.

DVD Plays on DVD Players But not on computers- not even mine!

HELP!
I burned a DVD for a client using DVDSP 3 ( i know it's old...but it's what I've got) and the DVD works fine on all the Standard desktop DVD players we've tried them on but when the client put it in her laptop, the computer rejected it. I burned her a new one myself and tried it on MY G5, which burned it (I didn't check the first time to see if it would work on a G5) and my computer rejected it too! I've burned dozens of DVD's before using the same version of DVDSP and haven't had this problem before...
what am I missing? Could it be something in my preferences or something that i forgot to click?
My DVD drive is a Pioneer DVD-RW DVR-106D and reads other dvd's with no problem...

No rhyme or reason... but tried one more time after putting back my old copy of idvd 06 with my oldest themes in it, and I now have DVD's that will play on regular DVD players!
Now, if Apple could just get us a firmware update for the SONY DVD RW DW-U10A which came with my G-5 and then maybe we could all burn disks at the new 16X speed! Instead of limiting our possibilites.
Oh and yes, I did contact Sony about firmware updates. They informed me that this is really an OEM drive (whatever that is) and that Sony does not support it!

Dvd plays on iMac, but not on TV?

Made short iMovie from movie clips, then to iDvd. Disc will play back through my G5 iMac but my stand alone player will not accept it to play through my HDtv. Would like to play it thru the TV. Any suggestions?
Jack

Thanks Shippey: Nothing unusual that I'm aware, but I don't do much with clips. These were made with a Nikon Coolpix. All my DVD' originate as still images, but these little clips are my daughters dog, and the dog is ill, so want a little record for her of the dog barking. Fortunately as I mentioned, the disc will play on my computer, but won't even load on the stand alone player for TV.
BTW, the movie has a theme and title at beginning and end but no sound except what was recorded on the clips.

Sound on DVD players, but not computer??

I had to switch from my mac to a PC in order to burn a DVD. I can get the DVD to work in a regular DVD player, but in PC's there is Video but no Sound?
Any help would be great!
Thanks All!

I had the same bizarre problem. Burned DVDs would play with sound on commercial DVD players, but not on my PowerBook through the DVD Player application. Attempting to solve the problem, I used Handbrake to rip the DVDs. The ripped files would play fine with sound if placed on my 5G iPod, but not on my Mac through QuickTime (still video only, no sound). This fixed the probem: launch Audio MIDI Setup (it is in your Utilities folder) and check the volume output sliders. One of mine was set to zero output, even though I had never before launched Audio MIDI Setup. I moved the output slider controls to maximum. Problem solved. Good luck.

After using video capture device to copy VHS to DVD, burnt DVD will play on computer but not

After using video capture device to copy VHS to DVD, burnt DVD will play on computer but not on DVD player. Tech support for the VCD said my HP DVD burning software has to burn "DVD Video and not DVD data" and to check with HP. How can i check myself.

Grahamster, welcome to the forum.
I recommend trying CDBurnerXP for burning video CD's. I have been using it for years without a glitch. I use it mainly for burning ISO's, but have used it for all types. Please let us know if it works or not.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

I can see other accounts on home share and play the songs, but not drag them to my account. Home share is on "on" on both accounts and both computers are authorized. What can I do to copy the song from account to account?

I can see other accounts on home share and play the songs, but not drag them to my account. Home share is on "on" on both accounts and both computers are authorized. What can I do to copy the song from account to account?

okasy if you want to move the music from the other comptuer into your comptuer you can > but if they were purchased with a different APPLE id then you need to authorize the comptuer to play them .
http://support.apple.com/kb/HT4527
click homesharing > shows how to move the song onto your comptuer

Music video plays in itunes but not on ipod

hi
like my subject line states, i transferred a whole bunch of music videos off of dvd into mp4 format using videora.
they play in itunes but not on my ipod.
i transferred about 400 or so at the same time to ipod do you think that's why most of them won't play ?
should i do it one by one ?
thanks.

it's more than just the mp4 format. They need to be encoded correctly with the right dimensions and other attributes as well. I don't bother with this sort of thing right now. If there is anyone who has these specs, just post them here. Otherwise, you can always google them or search these boards for the proper format/size/encoding.

How can I move movies from my computer to my iPad? They will play in quicktime but not iTunes

How can I move movies from my computer to my iPad? They will play with quicktime but not iTunes so I can't sync them

Th AVPlayerHD works well for playing other video types. You can transfer the videos via USB in the app tab in iTunes on your computer. When you open that tab when you have you iPad connected to the computer scroll down and you will see apps listed on the left and a blank on the right. Click on the app and then click on the add button under the blank window on the right. Then navigate to the video you want to play and it will transfer it to the iPad. I have about 14 movies on mine using AVPlayerHD. works very well. Also have VLC player (before it was yanked from the app store). Works about the same.
You can also get the app Air Video and stream the video to from your computer to the iPad, and even have Theo ad connected to the tv to watch on there. I do that all the time with my iPhone. Saves time with not having to sync movies all the time.

I am trying to save a mp3 file but firefox does not allow me to save it...it allows me to play the file but not download and asave it to my computer. How do I enable it to save mp3 files on my computer?

I am trying to save a mp3 file but firefox does not allow me to save it...it allows me to play the file but not download and asave it to my computer. How do I enable Firefox to save mp3 files on my computer?

Go to Options>Applications tab > search MPEG Layer 3 audio(audio/mpeg) > use "Save File" option on drop down menu.

My Mac Mini doesn't recognize my Avengers DVD--it keeps saying "Supported disc not available." I've tried other DVD's which work, but not this one. itunes and everything else has been updated to the newest versions. Help?

My Mac Mini doesn't recognize my Avengers DVD--it keeps saying "Supported disc not available." I've tried other DVD's which work, but not this one. itunes and everything else has been updated to the newest versions. Help? Also...It doesn't recognize the digital copy DVD.

I have ALL the exact same symptoms as on my home computer.
It sure sounds to me like something on the iPod is broken. If it's under warranty then I would send it back for repair. If not, check out some of the web repair services, such as iPodResQ etc.

ITunes purchased song plays in iTunes but not on iPod

I have purchased several songs from the music store. One of the songs will play in iTunes but not on my iPod. I've removed the song several times from the iPod and resynced with iTunes, but the song still cuts out in the middle of the song. What should I do?

If it's just a problem with that song, I would contact the customer service who may authorize another download.
http://www.apple.com/support/itunes/store/download/#form

Hi i am putting photos in my project it will play the videos but not the photos never had a problem before

hi i am putting photos in my project it will play the videos but not the photos i have not had a problem with this before

If you haven't tried re syncing the apps using iTunes..
Connect the iPad to your computer. Select it under Devices left side of the iTunes window. Select Apps from the menu, make sure the boxes next to those apps are selected then click the Sync button bottom right side of the iTunes window.

Dvd plays on players but not on computers

Similar Messages

Maybe you are looking for