DVD-R not consistenly playing

Is there any conclusion that can be reached by a dvd-r that only sometimes plays in my sony dvd player?
I don't understand why it would work sometimes, not others. Seems like it should either work or not.
Any idea why?

I think I may have found the answer to this problem.
But here are the details of my workflow.
shot on DV
Cut in FCP
exported as self contained mov
authored and encoded in iDVD 4 (still learning dvd sp) - using CBR which is like 7.3 Mbps - it does audio and video encoding.
Saved as disc image
burnt with disc utility at 4x (no other option in disk utility)
used prodisc 8x dvd-r media
no label
pioneer DVD-105
os 10.3.9, cpu is DP 1.25 GB G4
DVD player is older sony S560D
The error message is a C 13:00 error message on my sony dvd player. After doing some online searches, it looks like a problem with the player. Apparently a lot of people have had this problem with this sony model. I just seem to have the problem more frequently when using DVD-R's than professionally replicated discs. But others have had the problem on all discs.
oh well. I guess it's a bit of relief because DVD authoring is nebulous enough for me.
Thanks
Bill

Similar Messages

HT2499 how to get mac dvd player not to play all and stop at each title?

how to get mac dvd player not to play all and stop at each title

Play all chapters, i mean.
I have a DVD and I would like to just play a chapter, and discuss it, without the next chapter automatically starting. Usually DVD players have the "Play all" you can turn off and on...but I don't see it with the Mac player.
OS 10.4.
Macbook 6
Thanks so much!

Help !! DVD DOES NOT SOUND/PLAY RIGHT WHEN PUT IN PLAYER

Hello,
I have put together a dvd of slides and music and looks and sound great on the computer when I put the dvd in. The problem is when I go to play it in my dvd player, it not only does not sound good in many areas, but also produces a delay in the picture. It comes up, then kind of refocuses. I have done these before pre iDVD09 period and never had a problem. Is there something I can do? Perhaps a different software program. It is a Christmas present and I'm disappointed in it. Any help would be awesome. I am using 16x HP DVD's and have tried adjusting the speeds in preferences...ex. 4x. Hope someone can help. Thanks !!

Have you tried saving the project at a disk image, mounting the disk image and playing it with DVD Player. That will determine if the problem lies with the encoding or the burning.
Once you're satisfied that the disk image is OK you can burn it with Disk Utility or Toast. me01's mention of the recommended DVD brands is correct except the -R type is recommended.
OT

DVD's no longer play in 10.4.11

Both older and newer studio movies no longer play on my MacBook Pro after the last software update and can't figure out why. Thx for any tips.

This is the iDVD forum and iDVD is for CREATING DVDs and NOT for playing them. You use Apple's DVD Player application for that.
Try inserting a DVD - if the DVD Player doesn't automatically launch, go into your applications folder and double click on DVD Player to launch it. If the DVD still doesn't play, go into DVD Player and select File>Open DVD (or something like that).

Recorded a Non-DV tape to DVD. Unable to play on iMac.

I want to edit a home movie I put onto DVD from a non-DV camcorder. But unlike DVD's that were made with video from a DV Camcorder, this DVD will not even play on the iMac. And I want to copy it into the iMac eventually for editing purposes, but beed to know how to get it to play on the iMac normally first. Any help is appreciated.

ChicoPhi174 wrote:
I want to edit a home movie I put onto DVD ...
is this a videoDVD (=can be used in any DVDplayer) => don't hesitate to use the Search-Feature of this board, keywords 'import DVD'
or is this a dataDVD? the, you have to tell us the 'format', specificly the codec of that data, so NOT 'it's avi/mov', but wmv, sorenson, h263, mpeg1/2/4, whatever..
or, tell us the source of that 'video', e.g. what kind/tpye of camera ...

DVDPlayer not recognizing DVD. I have an IMAC (10.7.4) using DVDPlayer (vers. 5500.26.11) and will not recognize/play a dvd movie...it thinks it is a blank dvd. The dvd movie plays fine on my Mac Book Pro (10.6.8) on the Pro's DVDPlayer (vers.5.4).

IMAC DVD Player does not recognizing dvd movie . I have an IMAC (10.7.4) using DVDPlayer (vers. 5500.26.11) and it will not recognize/play a dvd movie...it thinks it is a blank dvd. The IMAC will play rented dvd movies. The dvd movie plays fine on my Mac Book Pro (10.6.8) on the Pro's DVDPlayer (vers.5.4) abd in my external Sony DVD Player The dvd move was made/burned on a PC. Why will a dvd movie play on my Macbook Pro and not my IMAC?

Hello:
This is not an area I have much experience in......I rarely insert DVDs and I have never had a similar problem.
When the DVD is in the drive (and DVD players is open) click on File>get disk info.
Barry

Pioneer 8400 DVD receiver player, as iPhone ios6 update now when connecting the new iPhone with ios6 via blutooth (firmware prob) to my car DVD 8400 unit, when playing music such as on my phone or Pandora the track button does not function or work at all

pioneer 8400 DVD receiver player, as iPhone ios6 update now when connecting the new iPhone with ios6 to my car DVD 8400 unit, when playing music such as on my phone or Pandora the track button does not function or work at all not even if i press skip track forward or back on the unit it doesn't function everything works except that. on listening to radio or anything else related not pairing thru Bluetooth unit works fine, seems there to be Bluetooth update that is not making iPhone and unit not compatible at all. does pioneer need fix this problem with update firmware or thru apple need help. my iPhone was working fine before with previous ios 5 before.

Dear Valued Pioneer Customer:
We would like to inform you of the availability of an optional Bluetooth® firmware update (HW05-SW01.27.20) that enables Bluetooth AVRCP control and metadata display from a compatible Pioneer CD or DVD Receiver when used with an iPhone® 5 or iOS 6 device. If you do not own an iPhone 5 or iOS 6 device, there is no need to install this update.
This firmware update may be used only with the following 2012 Pioneer products:
CD Receivers
DVD Receivers
DEH-P8400BH
DEH-P9400BH
DEH-80PRS
AVH-P2400BT
AVH-P3400BH
AVH-P4400BH
AVH-P8400BH
In order to perform this update, the following items are needed:
A Pioneer CD or DVD Receiver above with built-in Bluetooth
Laptop with built-in Bluetooth running Windows® 7
Bluetooth firmware update (HW05-SW01.27.20)
How to Obtain the Free Firmware Update
1. Download the INSTRUCTIONS for the optional Bluetooth firmware update (HW05_SW01.27.20).
2. Download the UPDATE FILE to a computer and transfer the file to a compatible 2012 Pioneer CD or DVD Receiver via a Bluetooth-enabled Windows 7 laptop.
You can also arrange for Pioneer to update your 2012 Pioneer CD or DVD Receiver by calling Pioneer Customer Service toll free at 800-421-1404 during regular business hours (M-F 10AM-7:30PM Eastern Time, except on holidays). If this firmware update is performed by Pioneer, there is a charge of $60.00 (this charge includes return shipping of the updated unit within the U.S.). Charges for removal/reinstallation of the unit and shipment to Pioneer are the customer’s responsibility.
How to Determine if the Firware Update has Already been Installed
CD Receivers:
• With the unit turned off (press and hold the source button until the CD Receiver turns off), press and hold the center of the volume knob to bring up the Settings menu → rotate the volume knob until "BT Version Info" is displayed and then press the center of the volume knob → The firmware version should show HW05-SW01.27.20.
DVD Receivers:
• With the unit turned off (press the home button and select ‘OFF’ from the source icons), press the home button → Press the “System” icon at the bottom of the screen → Select the “Bluetooth Version Info” option → The firmware version should show HW05-SW01.27.20.
If the Bluetooth firmware version shows HW05-SW01.27.20, no further action is necessary.
Questions
If you have any questions, please contact the Pioneer Customer Service Center toll free at 1-800-421-1404, Monday through Friday, 10:00 a.m. to 7:30 p.m. (Eastern Time), except on holidays.
Sincerely,
Pioneer Electronics (USA) Inc.

IMac will not play the DVD that I have made on imovie and burned on iMac SuperDrive ?? (DVD plays fine on household DVD player and also play fine in Toshiba laptop ) Why not on the iMac - anyone know???

iMac will not play the DVD that I have made on imovie and burned on iMac SuperDrive ?? (DVD plays fine on household DVD player and also plays fine on Toshiba laptop ) Why not on the iMac - anyone know???

There are many reasons this could be the case but whether an optical disc can be read or not is a function of:
The reflective media layer of the disc
Whether the burned disc was a DVD-R, DVD+R, DVD-RW, DVD+RW
The brand, model, and production lot of the disc
The specific frequency of the Write lasers that burned the disc
The specific frequency of the Read lasers that are attempting to read the disc
Are the Read lasers in the drive working (it is common for one set of lasers in a drive to fail while others continue to work)
How old are the Write and Read drives (laser frequencies change with age)
Is there dust on the read laser
Is there dust on the read lens
etc.
At one time it was estimated that fewer than 80% of all burned discs were readable in 90% of the drives. That has, I believe improved over time but at the same time it seems the faillure rate of lasers in the drives has increased but that may simply be the result of how many different read and write lasers there are in today's superdrives. Fortunately todays drives are a lot less expensive the replace -- now that Apple no longer installs optical drives in their computers.

DVD will not play on iMac in Bootcamp using Windows 8

I am trying to play a DVD in Windows 8 being run with Bootcamp on my iMac (OSX 10.9). The DVD will not autoplay in Windows. You can see the DVD in the folder view, but can only access the Video_TS and Audio_TS files, not the actual playable DVD. Have tried playing it through the folder view as well as Windows Media also to no avail. Booted down Windows and into Mac OS, and the DVD autoplays just fine. How can I get it to play in Windows mode, as the software we are running for a certain program needs to be accessed constantly before and after the DVD needs to play?

tried the vlc player it's free to download and works better then other players really

I've burnt a slideshow of my photos onto a DVD disc but it will not play on my DVD player. It plays ok on my acer laptop. I burnt the same disc with slideshow from my old dell computer

I've burnt a slideshow of my photos on my Apple Mac to a DVD+REW disc but it will not play on my DVD player or on a combined DVD/TV. However it will play on my wife's Acer laptop. I then erased the disc & burned another slideshow from my ancient Dell computer onto the same disc &it played just fine on everything. So it seems the problem ids somewhere in the Apple Mac process. Any ideas?
Keith C

Gary Scotland wrote:
If you want to play material on a dedicated DVD Video hardware player, you must create a DVD video disc, and you must use a DVD authoring application.The software creates files that the DVD video player can play and will burn them to a recordable DVD disc. Examples of applications are:
Roxio Toast and iSky DVD Creator
Mac's used to be supplied with iDVD authoring software but Apple discontinued it in 2011.
Thanks for that. Will need to check iSkysoft out. I am in the process of looking for a VisualHub replacement/backup. Especially when it comes to ease of use. Toast is ok. Just looking for something along the lines of VH.

DVD is not playing in my DVD player!

I made a movie in iMovie HD, created a DVD in iDVD, burned it successfully, and now that I try to play it on my DVD player, it is choppy and basically freezes and says "disk error". I can see the title pages and everything looks good, so I'm not sure what's going on. I took it to work and it only played on an old DVD player in someone's office, but not on my computer DVD player, not in other, newer DVD players. I burned the movie on a Maxell DVD-R, which I thought was a good brand. Do you think it has to do with burning speed? As I'm not sure what speed I set the burn for. It does play, however, on the apple DVD Player on my mac, so I know it works at least somewhere! The problem is that I gave this DVD to the bride (I edited her wedding) and she was unable to play it at her home. Any ideas????

Hi
I burn my DVDs at an as slow speed possibly. This can be set in iDVD08 or by creating
a DiskImage and use Disk Util tool or Roxio Toast™ to burn where speed can be
set down to x1
Speed is set by the no. on the DVD bought eg x16 and max speed on DVD-burner eg x8
in previous versions of iDVD. So forcing iDVD up to version 6, one has to buy x2 DVDs.
No other way possibly else using another program to do the actual burning.
I only use Verbatim DVDs
Only DVD-R (Single Layer)
Read this on iDVD quality = Result
*DVD quality*
1. iDVD 8 has three levels of qualities.
iDVD 6 has the two last ones
• Professional Quality (movies up to 120 min.) - BEST
• Best Performances (movies less than 60 min.) - High quality on final DVD
• High Quality (in iDVD08) / Best Quality (in iDVD6) (movies up to 120 min.) - slightly lower quality than above
2. From
• FCE/P - Export out as full quality QuickTime.mov (not selfcontaining, no conversion)
• iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
when the movie includes photos. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
• iMovie’08 not meant to go to iDVD. Go via Media Browser or rather use iMovie HD 6 from start.
3. I use Roxio Toast™ to make an as slow burn as possibly eg x1 (in iDVD’08 this can also be set)
This can also be done with (Apple) Disk Util tool.
4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
use an external one as scratch disk (if it is not start-up disc).
5. Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
6. DVD-R (no +R or +/-RW)
7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
8. Don’t burn more than three DVD at a time - but let the laser cool off for a while befor next batch.
iDVD quality also depends on:
• HOW much free space is there on Your internal (start-up) hard disk. Go for approx 25Gb.
less than 5Gb and Your result will most probably not play.
• What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
Convert to .aiff first and use this in movie project
• What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
(If You need to change to do a NTSC DVD from PAL material let JESDeinterlacer3.2.2 do the conversion)
(Dropping a PAL movie into a NTSC iDVD project
(US) NTSC DVDs most often are playable in EU
(EU) PAL DVDs most often needs to be converted to play in US
UNLESS: They are plabacked by a Mac - then You need not to care
• What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
• How You encode and burn it. Two settings prior iDVD08
Pro Quality (only in iDVD08)
Best / High Quality (not always - most often not)
Best / High Performances (most often my choise)
1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD08
2. Project info: Select Professional Encoding - only in iDVD08.
Region codes:
iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
DVD Studio pro can set Region codes:
1 = US
2 = EU
Yours Bengt W

Imac G5 Play Dvd but Not Cd

I have a Imac G5 with a superdrive and if will play DVD but not CD. Anyway i can fix this?

Two ways that might fix it (the superdrive uses different lasers for CDs and DVDs):
1. Clean the superdrive with a proprietary lens cleaner that uses tiny brushes.
2. Reset the SMU:
Resetting the SMU on a G5 iMac:
http://support.apple.com/kb/HT1767

DVD's Not Playing....

I have the latest software of Final Cut Pro , Motion , Soundtrack , and DVD Studio Pro. Recently when i have been burning DVD's in DVD Studio Pro the DVD's have not been playing in my home DVD player. The DVD's though play on my Apple G5 flawlessly. I am using the Apple DVD's and tried all of the different laser settings on DVD Studio Pro , Blue & Red. What do i need to fix in the DVD Studio Pro application to get my DVD's to play on everday DVD players? I know its prob. just a minor thing.

all of the DVDs i use are the Apple brand DVDs. When i am finished with a project in Final Cut Pro i export it using Compressor and choose MPEG DVD option. All of my footage is filmed with a Panasonic AG-DVX100, DV Film. I dont mess around with the 24fps featture because that gets to confusing and havent found much sucess for that.

DVD Player not playing discs

My DVD player won't play rental dvd's etc .. I get a message saying "Supported Disk Not Available"
I have successfully played on 2 dvd's on this machine (it's only 2 weeks old) and each of those times i got a message asking my permission to change the region settings plus a warning that i would only be able to change the settings 5 times ... this third attempt at watching a movie (a big reason i bought the 2nd machine - to watch dvd's in my bedroom) it now gives me the 'not supported' message
HELP!!!!!

After some research I tried a suggestion from another forum to repair disk permissions - so far so good (at least the dvd i was trying to watch played no problem)
I did see numerous posts in my travels where people had experienced exactly the samr thing that I had - is there a bug Apple???

What can I do, if a DVD will not play?

What can I do, if a DVD will not play?

You don't want to change the player Region Code. If I remember correctly you can only change the Region Code three times and it sticks to the last Region Code you selected.
Does the DVD play in another player?

DVD-R not consistenly playing

Similar Messages

Maybe you are looking for