DVD R replacement with dual layer

I've read there are some problems trying to replace the super drive in a dual 2.o G5 with a Dual Layer drive.
Anyone have experience with this?
Rick

Anyone have experience with this?
Yup. I've done three.
I used the Pioneer 110A DL-Superdrive ($70 at fastmac.com).
Beforehand, download some drivers from "Patchburn" appropriate to your OS version (http://www.patchburn.de), and install them.
Then swap out the drives. Simple. Your Apple manual that came with the G5 has EXCELLENT instructions on removing/installing the optical drive.
Check the ID jumper config on the rear of the new drive to make sure it matches the old one. It's probably "drive select" which is no jumper installed, but check it anyway to be sure.
After installation, boot the Mac. Install the Patchburn drivers. Restart. Rebuild permissions (THIS IS IMPORTANT!!).
Test the drive.
Say 'Wow! That was easy."
Only problems I've had was a DOA drive that simply wouldn't read or write anything. Replaced it with a new one and all was well.
BTW - with regard to existing SL SuperDrive, due to circumstance I ended up using my new DL drive in an external FireWire box the first time I hooked it up.
It worked so well that I left it external and kept the old 105 SL-SuperDrive as the internal. Now I can burn two DVD's at one time (after duplicating my copy of Toast 7, of course).
So if you have an old, dead external hard drive in a box (or Jaz, or Syquest, or tape drive - anything with a working fan and power supply) you can buy a FireWire bridge board from Granite Digital and put your new drive (or your old one) in that external box.
Personally, I like having the two opticals.
Good luck. Let me know if you have any questions. If you need details about sourcing these components I've mentioned, please send me an e-mail and I'll send you the info.

Similar Messages

DVD Playback Issues with Dual Layer media

I have been using DVDSP for years now, and have rarely had any issues with burning my final projects to DVD. Any playback issues have usually been issues with players and +or-R media.
I have recently upgraded to a MacPro, and have been really stoked about being able to burn to Dual Layer media. My previous G5 didn't have a DL burner.
I have a large project that fills most the disk, and everything seems great in the software, and when playing the media files on the computer. But when I burn to disk, I have huge issues with playback on different DVD players, computers, etc. I have stuttering with menu's, freezing, and stuttering with playback of video.
I read that the issue could be because of the speed I'm burning at in DVDSP, so I saved as a disk image, and used disk utility to burn at a 4x speed. This seemed to help, but when I got to the end of the movie I had huge issues with stuttering/playback quality. So I burned another copy from the same disk image, and it wouldn't even play in my DVD player.
When I open the Video_TS folder from the DVDSP Build, and play right off my hard drive in the DVD software player, I don't have any of these issues.
So I'm guessing my problem is either my DVD media I'm using, or the burners on this new computer. I've burned DVD's on both burners (yes I have 2) and I still have the same problems.
I am using Memorex DVD+R DL and they are 8x.
Can anyone offer me some advice here. I really wish I could just hit burn and have a disk work. DL media isn't all that cheap and I don't know how many coasters I can make and keep my sanity.

I used compressor and I used the DVD: Best Quality 90 Minutes setting. The bit rate is avg 6.2 and maximum 7.7. And yes I used ac3 audio.
When you say lowest speeds possible... shouldn't a burner that says it burns at a speed work at that speed? I'm cool with burning at a lower speed to get this thing to work, but why have a burner that burns DVD DL at 8x speed, when it doesn't work? Shouldn't it work? Why is it that it won't work?
If I get Verbatim DVD+R DL, can I burn at 8x speed with those?
When I burn in disk utility I used the "varify burned data" and everything checks out ok. So why do I have this issue. Just curious.

Incompatibility issues with Dual Layer DVD+R help?

I think I've made a serious mistake in believing I could author a Dual layer dvd for replication and sale on my own. I've spent over 14 months on this film, which is working perfectly in Encore, complete with extensive menus and transitional movies.
I've done my best to transcode the media in the most compatible way (keeping bitrate below 7mbps and using dolby digital audio format) BUT I'm still having bad luck with MOST dvd players.
The DVD plays properly on my cheap sony player, but both my toshiba and humax/tivo players failed to read the disc. (multiple tries/burns....or coasters, now) I've read that there are common problems with dual layer +R.
MY QUESTION IS: what is the BEST POSSIBLE WAY to author/burn this project for mass replication? Can I really achieve the result I'm looking for with Encore or will I have to give up and go to a professional authoring house with DLT capability?
Will I get the best result by burning from encore straight to disc OR burning an image or folder, then using a third party burning program?
Thanks SO MUCH for any responses. This process has been soul-crushing.

>The DVD plays properly on my cheap sony player, but both my toshiba and humax/tivo players failed to read the disc. (multiple tries/burns....or coasters, now) I've read that there are common problems with dual layer +R.
Marc, the only mistake I think you are making is in assuming that set top players can handle a written DVD+R DL disc.
Support in older players is at best sketchy.
If the disc is working properly in at least one player, then you should be good to go.
Replication will produce a different type of disc. One that
i will
play properly.
Not all burners support book typing, and unless you know what you're doing here do not use these "fudges". It's best using Plextor, and even Benq burners. The freeware utility IMGBurn has this ability, and it also tells you what burners do this. I've never needed it personally, as my Pioneer burners & Denon players have no trouble with +R DL media.
What you really need is a player that you
i know
plays DVD+R DL discs properly. Once you know your player is good with the format, then all other inconsistencies are player related, not authoring, and not your problem. There is simply no way at all you can guarantee any form of compliance with +R DL media, as there is nothing in the specs that says any set top player has to read these discs. Or -R DL where support is generally even worse.
Whilst most players will read -R single layer & +R single layer, again there is no mandatory requirement to do so.
You will need to get these
i replicated
and not duplicated. Duplication (burning) will result in a lot of returns, and a lot of wasted money.

Trouble with Dual Layer DVD in DVD Studio Pro

I am having some trouble burning a Dual Layer DVD in DVDSP. About 1 out 3 discs are coming out unplayable on multiple players and some are freezing during playback (starting and stopping). I have not worked with DL DVD's before and was wondering if there is a particular brand that might be better then another or if there are some settings I may be missing in DVDSP.
I am using Memorex Dual Layer DVD+R DVD's, my project is 7.1 GB's, and I am running DVD Studio Pro 4. Any feedback or ideas would be appreciated.

>I am using Memorex
That's the most likely cause of the problem. Memorex is notorious for poor quality. Try switching to Verbatim or Taiyo Yuden (now under the JVC brand).
-DH

Problems Burning DVD's (Single and Dual Layer) with FCPX

I have been burning the same size and length DVD's every week on single layer DVD's and since the update I can no longer do it.
FCPX was great for the inexperienced user, Apple what have you done !!!!!
Because it now asks for a dual layer DVD I went out and bought (expensive) them and they won't burn either, it keeps coming up with an error message prior to completing.
I went through five of the dual layers and all had the same problem.
I need the program to be easy, it was and now its not.
Will there be a fix or how do I go back to the version prior to the update.

Is Share>DVD the only export option giving you trouble? Will it let you create a single layer disk image?
If sharing works otherwise, export a master file. Bring that into Compressor and choose the DVD preset. In the Inspector>Encoder>Quality you should be able to adjust the bit rate down to where it will ft on a single-sided disk.( As you adjust te slider, the "Allows" message at the very bottom of the Quality tab will change. Be conservative and allow a cushion.)
Russ

Problems with dual layer DVD reading MBPro (2009)

Hello,
recently i wanted to take a look at a dvd that came with a magazine (for pcs, but that shouldn´t really matter here) on my macbook pro from mid 2009 (see http://support.apple.com/kb/SP541) with the latest version of osx.
Unfortunately, it didn´t succeed to read the dvd. only ejected it after doing a little searching and making strange noises.
According to the technical specifications this macbook pro should be able to at least read dual layer dvds. I won´t even try to burn one of those, because after doing a little research on the www i found a lot of entries with people going insane with the burning capabilities of macs concerning dual layer media.
Unfortunately i couldn´t find anything on the topic in the forums here. Also no official statement whether macs can or cannot cope with dl media. In my opinion, if it´s specified in the tech specs, then the computer should also live up to the expectations.
Are there any suggestions on how to go about with the matter of dl media and macs? Any information would be much appreciated. Also a notice from apple would be nice, this seems to be a matter (given, although probably not of top priority) concerning quite a lot of people and machines.
kind regards,
Reinhard Sommerer

Hello again,
well - thanks for the information. i would like to point out that the dvd i was trying to use was not for burning purposes. it was a medium that came with a magazine. out of my experience sometimes these work even better than home-burnt dvds, but that might be subjective.
anyway, tonight i gave it another try with the cleansed medium. apx. in the same condition as last time (had stored it in a safe place) and big surprise: this time it didn´t read neither side again. kind of a drawback - maybe tomorrow i´ll have more luck again.
so my hopes for an apple official to comment on this forum won´t be heard, i guess. although it appeared to me that last time here i had seen a user profile resembling an official apple profile. but i might be wrong, i´ll just keep on wondering about this so-called dl-drive.
kind regards,
reinhard

Backup to DVD doesn't span properly with dual layer media.

I attempted to use the backup feature in Itunes 7.0.1
After choosing backup to disc, it provided a warning that the backup would require more than one CD - and that's OK by me, so I went ahead and put media in the drive. It started and after filling the first disk, it stopped and said it was aborting because of an 'unspecified error?'
My DVD drive is capable of dual layer burning, and I use good quality media. It did successfully burn the DVD, but only part of the library was backed up onto the dual layer DVD I was using. I have used both this drive and this type/brand media succesfully on numerous other projects.
It looks like the backup routine fails when using dual layer media and backing up more than will fit on one media.
I could't acess the bug report paga so am posting it here.
I don't know if it's repeatable, because I don't want to waste any more dual layer DVD's.
Windows XP Pro, non remarkable system otherwise, P4 2400 - 1G memory no weird startup programs, no anti virus running. pretty much plain vanilla.
Just thought other might have the same issue.
Windows XP Pro

henry, would it be possible to get a copy of your CD/DVD diagnostics to Apple via the form at the bottom of the following document?
Optical drives diagnostics and troubleshooting

Maximizing HD Video with iDVD/DVD Studio Pro and dual layer DVD

I have 30 minutes of edited home video from iMovie HD and I am trying to use iDVD to burn the project. I have a dual layer DVD+ disk and would like to maximize the quality of the project to 8 gigs. Each time I change the project info, etc. the project still is just 1 gig. Any suggestions, please....

iDVD produces NTSC/PAL videoDVDs within the specs given by the socalled Red Book Standards...- max bitrate is 8 - 9kB/sec... which is, in your case 30min=1GB
(but: iDVD "wastes" a lot of bandwidth for PCM audio....)
DVDSP/Compressor allows a manual setting of bitrates, so you can devide the max. rate wiser between audio and video... but some dvdplayers (esp. software ones in the PC world) don't handle such high bitrates...
as said above, no homebrewn HiDef DVD so far, lets see, what 10.5 and the new ProMacs will bring to us....

DVD with dual layer on Toshiba Satellite L10?

Hi,
I've bought a Toshiba Satellite L10 recently. How do I know if the DVD burner has got the new dual layer system? It's neither written in the user manual nor on the DVD/ROM drive. There it says: DVD+ReWritable, whereas it says on the DVD I've bought: DVD+R DL. So if there's no "DL" written on my drive does that mean that is does not do dual layer DVDs?
I hope you can help,
Sunflower

Hi,
as far as I know the L10 can have only a CD writer or it has, as Quad says, a DVD Super Multi drive. In your case I think it is the Multi drive, which should be able to use DL.

Player compatibility problem with dual layer media

I've created a dual layer DVD and there is a problem with compatibility from player to player.
It plays fine in one of my DVD players but will not load in the other.
The duplicators tested my master on 2 players and it loaded on both, but would lock up if a chapter was selected from the submenu.
It has 4 tracks of content. 3 menus, and a bunch of chapter markers. The original build had stories (replaced with standard chapter markers) but I removed them hoping it would solve the problem.
The imported video tracks were created with Compressor. MPEG-2 2 pass VBR max bit rate 7.5. AC3 audio tracks. 7.7 GB on disc.
I'm already way over my deadline and ahve no idea what to do next other than maybe recompress so the disc is not so close to being maxed out.

Thats just how compatible that media is... +R DL (double layer) & -R DL are not that compatible. Recordable media is less compatible that replicated discs but double and dual layer media can be 50% compatible at best (depending on your target market...)
Good quality media, Verbatim +R DL for example burnt at slow speeds helps improve things,
-Jake

LightScribe SuperMulti DVD±R/RW with Double Layer Support is no longer able to read all lightscribe discs(Blank or Containing Data)

Hi,
The product Name of my computer is: HP Pavilion dv6-6093ex Entertainment
Notebook PC support
The number of my computer is : LM610EA#A2N.
Could anyone please at this splendid forum take some of their precious time
out to really reply my questions and solve my problems?
FIRST OF ALL:
My HP Pavilion Laptop is about 3 years old.
My
sister's Dell Inspiron laptop is 3 years old.
My HP laptop is well-cared, as opposed to my sister's Inspiron Dell laptop, which is always thrown in dust without caring at all. Also, its battery is always inserted even when it is fully charged while the laptop is plugged in to the main power supply.
However, my laptop is either used on only battery, or on plugin. Also, it is kept from the dust. But, I really found that the battery of the Dell laptop still lasts about three and half hours, and there is no problem cooling fan is not properly properly.
I only remember one thing differently done on my laptop battery which is I charged it fully, then I stored it without using it for about four months, then when I reused it, I found it got worse over time. I.e. first time of using it after storing,I found
it empty, then I charged it again fully, however, then it lasted about 2 hours, then 1 and half hours, next an hour, now it is only lasting about 20 minutes without performance. If there is high performance, then
the computer shuts down suddenly.
My problem is follows:::
First: Whenever I inserted any Containing Data OR Data CD/DVD-RLightScribe discs, I found that HP optical driver was
unable to read them. When clicking on the optical disc drive 'double-click' while disc was inserted, then I found that disc opened as this way(NOTE: With a CD/DVD player is grayed out)
I was told 'I suspect the culprit might be hardware and lightscribe dive might be
corrupt. Please sent it to service center to check. In addition, this thread could be as a reference:
http://answers.microsoft.com/en-us/windows/forum/windows_vista-hardware/media-in-cddvd-drive-is-not-readable/794fe26a-7e47-45c4-a50b-0af2ed53f75b'
Since no one replied to me at HP forums, although my HP laptop is one of their products, I had to post my problem here to know if my driver is corrupted and needs to be replaced or not.
Blank Or Used(containg data) CD/ DVD ±R/RW lightscirbe is unable to be read by optical drive
When clicking on drive 'duble-click', I found it opens like a USB FlashDrive or With a CD,DVD player, however,
: Bare in mind that 'with CD/DVD Player'
is grayed out)
Not Blank(containing data) CD/ DVD ±R/RW NON -Lightscirbe disc opens normal:
Blank CD/ DVD ±R/RW NON-lightscirbe opens normal(Opens like
a USB FlashDrive or With a CD,DVD)::
My LightScribe System Software version is:
I've tried installed the latest version of lightscribe software, then I run
the diagnostic utility, however, the problem still persists.
My HP CD/DVD DVDآ±R/RW specs are::
Optical Drives
hp CDDVDW TS-L633R
Media Type DVD Writer
Name hp
CDDVDW TS-L633R
Availability Running/Full Power
Capabilities Random
Access, Supports Writing, Supports Removable Media
Read capabilities CD-R,
CD-RW, CD-ROM, DVD-RAM, DVD-ROM, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-R DL, DVD-RW
DL, DVD+R DL
Write capabilities CD-R, CD-RW, DVD-RAM, DVD-R, DVD-RW, DVD+R,
DVD+RW, DVD-R DL, DVD+R DL
Config Manager Error Code Device is working
properly
Config Manager User Config FALSE
Drive E:
Media Loaded
FALSE
SCSI Bus 0
SCSI Logical Unit 0
SCSI Port 0
SCSI Target Id
1
Status OK
Trying to solve the problem,
I have done these steps in order::
I tried checking with dignostic ulitiy:
I have tried Advanced View , this is the file of output data ofdignostic utlity
LightScribe System Software Settings:
SOFTWARE\LightScribe\MessageDir C:\Program Files (x86)\Common Files\LightScribe\
SOFTWARE\LightScribe\LSPrintDialog C:\Program Files (x86)\Common Files\LightScribe\LSPrintDialog.exe
SOFTWARE\LightScribe\LSPrintingDialog C:\Program Files (x86)\Common Files\LightScribe\LSPrintingDialog.exe
SOFTWARE\LightScribe\LsPrintLauncher C:\Program Files (x86)\Common Files\LightScribe\LSPrintLauncher.dll
SOFTWARE\LightScribe\ResourceDir C:\Program Files (x86)\Common Files\LightScribe\res
SOFTWARE\LightScribe\LSPrintAPI C:\Program Files (x86)\Common Files\LightScribe\LSPrintAPI.dll
SOFTWARE\LightScribe\Update\UpdateShellCommand http://www.lightscribe.com/go/downloads/windows
SOFTWARE\LightScribe\Update\PreviousVersion 1.18.20.1
SOFTWARE\LightScribe\Update\CurrentVersion 1.18.27.10
SOFTWARE\LightScribe\Update\TrailingVersion
SYSTEM\CurrentControlSet\Services\LightScribeService\Type 16
SYSTEM\CurrentControlSet\Services\LightScribeService\Start 2
SYSTEM\CurrentControlSet\Services\LightScribeService\ErrorControl 0
SYSTEM\CurrentControlSet\Services\LightScribeService\
SYSTEM\CurrentControlSet\Services\LightScribeService\DisplayName LightScribeService Direct Disc Labeling Service
SYSTEM\CurrentControlSet\Services\LightScribeService\ObjectName LocalSystem
SYSTEM\CurrentControlSet\Services\LightScribeService\Description Used by the LightScribe software components to support 3rd party disc labeling applications using the LightScribe COM Application Programming Interface (LSCAPI). This service needs to run for LightScribe direct disc labeling to work.
SYSTEM\CurrentControlSet\Services\Eventlog\Application\LightScribeService\
SYSTEM\CurrentControlSet\Services\Eventlog\Application\LightScribeService\
SYSTEM\CurrentControlSet\Services\Eventlog\Application\LightScribeService\TypesSupported 7
SYSTEM\CurrentControlSet\Services\Cdrom\Enum\0 IDE\CdRomhp_CDDVDW_TS-L633R______________________0300____\4&334f7860&0&0.1.0
SYSTEM\CurrentControlSet\Services\Cdrom\Enum\Count 2
SYSTEM\CurrentControlSet\Services\Cdrom\Enum\NextInstance 2
SYSTEM\CurrentControlSet\Services\Cdrom\Enum\1 SCSI\CdRom&Ven_ELBY&Prod_CLONEDRIVE&Rev_1.4\1&2afd7d61&0&000000
SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\allocatecdroms 0
SYSTEM\CurrentControlSet\Services\CDRom\autorun 1
SOFTWARE\INTEL\Intel Application Accelerator Not detected
Drives and Media:
Drive 0 : hp CDDVDW TS-L633R 0300 219 (E:), Media Imaging Parameter : 114
I tried running the below command line to fix potential disk issue 'Chkdsk/r /f'
I cleaned the drive, discs, and so on.
I have uninstalled the all third-party data recording software.
I have uninstalled the Cyber DVD suite, lightscribe system software
which came pre-installed with my HP pavilion Notebook.
I have recovered my system from the HP Factory Recovery discs.
I have tried opening all those LightScibe discs not opening on my HP optical drive, on a Dell optical drive, and all of them were opened well, although Dell optical drive did not have a lightscribe feature at all., nor third party disc recording software.
However, the problem is still with opening the discs LIGHT-SCRIBE.
Thus, my questions are:
How to determine if the drive is corrupted and needs to be replaced with another one.
I think there something needed to be done on the BIOS Of my HP laptop[[[A similar problems happened on my Desktop computer's optical drive which is as follows (ALL discs are opened as empty by Optical Drive of My Desktop Computer) ---while
my optical drive of my desktop was connected to the
primary slave IDE, and the HDD was connected to the primary master IDE, the optical drive and hard disk are functioning well. However, I remember that while burning an image with Nero essential V: 5, something went wrong, and
then the Optical Drive of My Desktop Computer (HL-DT-ST DVD-RAM GH22NP20) became NOTrecognised/Installed on
BIOS, although it was still shown on the device manager as a recognised device. Also, it was listed on my computer, however, when entering a disc(blank or with data) into the drive, I found it was not recognised, and it opened empty(no files
at it), although it contains data. Thus, I decided to boot to BIOS, and clicked on 'Autodetection for IDE', then I found that only HDD was still shown as installed on BIOS. However, the optical drive was not. Th I tried clicking on it on BIOS and then
clicking on 'enter' to try to let the device be re-recognized. However, that
made no difference. I had to take part my computer ,and then reconnected the optical drive onto thesecondary slave IDE , and let HDD connected to the same
primary master IDE. Then, I found that the problem solved and all discs were read normally. Aslo, optical drive became installed on BIOS.
What is meant with with double Layer Support.
How much does it cost?
A man should convert his anger and sadness into strength to continue living in this life.

Did you try unsinatalling LightScribe application then checking the status ?
This is probably related to the faulty hardware or the application ( LightScribe
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.
Could you please really concentrate with me, and really reply to me to finish this problem pending.
If you had had a look again at my first post, you would have seen that I said that I have done some things, among of which is: I have uninstalled the Cyber DVD suite, lightscribe system software
which came pre-installed with my HP pavilion Notebook.
Yes, you're right the two threads below are concerned about one issue.
https://social.technet.microsoft.com/Forums/en-US/w7itpromedia/thread/5c1aa5e8-9728-492b-a5c3-387f29ee4b6e/#d6f63628-29a3-4adf-b33f-03b33c138910
https://social.technet.microsoft.com/Forums/windows/en-US/683997ff-1004-4579-b69d-5e982746c917/lightscribe-supermulti-dvdrrw-with-double-layer-support-is-no-longer-able-to-read-all-lightscribe?forum=w7itpromedia
However, this thread contains more precise details and screen shots about the problem. I was not able to understand whether all lightscribs were not unable to be read or not. However, I now recognized that, and I recognized that only all LightScribe(empty
or used) discs are unable to be read. furthermore, that other thread got far too longer to be followed.
Moreover, I would like you to take some time out to answer my problem about Lighstscribe discs since I am going to purchase 'A battery, Cooling Fan' From the HP agent in Yemen, which is far away from me about 1000 Km. Thus, If my optical disc drive was corrupted
as well, then I would be requesting the 'optical disc drive' as well from the HP along with 'Battery, Cooling Fan' .
A man should convert his anger and sadness into strength to continue living in this life.

Recordable space on DVD-R vs. Dual-Layer DVD+R

I have the PB 17" 1.67GHz Nov 2005 model with the DVD dual-layer burning drive.
I bought a 15 pack Memorex DVD+R DL recordable 2.4x, 8.5GB, 240min video to experiment some with this media.
On many of my DVD-R Single-Layer discs I can record data up to around 4.3 GB at a pinch. I notice that the DVD+R Dual-Layer disc will only record data up to around just under 8GB using Toast Titanium v7.0.2 in each case. Is this to be expected ? I was hoping for much closer to 8.3 GB. If the 8GB is all I can expect what is the 0.5 GB being held back for and what is this user-unusable spaced used for ?
Thanks... Barry

I have the PB 17" 1.67GHz Nov 2005 model with the DVD dual-layer burning drive MATSHITA DVD-R UJ-846.
I bought a 15 pack Memorex DVD+R DL recordable 2.4x, 8.5GB, 240min video to experiment some with this media. Toast actually reports the disc ID to be RITEK...D01 dual, opposite track path.
On many of my DVD-R Single-Layer discs I can record data up to around 4.3 GB at a pinch. I notice that the DVD+R Dual-Layer disc will only record data up to around just under 8GB using Toast Titanium v7.0.2 in each case. Is this to be expected ? I was hoping for much closer to 8.3 GB. If the 8GB is all I can expect what is the 0.5 GB being held back for and what is this user-unusable spaced used for ?
Thanks... Barry

Why does the file size change when put into an iDVD project? And problems with dual layer discs...

I exported a short video of mine from Final Cut Express and the size of the file came out to 7.3 GB. When I put it into an iDVD project, it says that the file is only 800 MB. I tried just burning it onto a dual layer disc anyway to see if it might still burn at the original file size, but the disc came out unusable for some reason, and obviously hadn't been burned anywhere near full-capacity. So, I tried it again, and the exact same thing happened.
I guess my first question is: why is iDVD changing the size of the file? I want the quality to be the best it can be, so keeping it at 7.3 GB as opposed to 800 MB is rather important.
Secondly, why did the dual layer discs come out unusable? I've burned single layer discs before and they haven't been an issue. Also, I know for a fact that the drive can burn dual layer discs, so that isn't the issue.
Thanks in advance to anyone who can provide me with help on this issue.

LivelyJamesS wrote:
I exported a short video of mine from Final Cut Express and the size of the file came out to 7.3 GB. When I put it into an iDVD project, it says that the file is only 800 MB.
Guessing here but it looks like you edited/exported an SD/DV sequence of about 30 min in FCE. DVD needs to be MPEG-2 so iDVD compresses the original file down to the size that you report.
LivelyJamesS wrote:
I guess my first question is: why is iDVD changing the size of the file? I want the quality to be the best it can be, so keeping it at 7.3 GB as opposed to 800 MB is rather important.
The quality will be what the MPEG-2 compression and the software allow for. MPEG-2 is DVD standard .... there's no way around that.
LivelyJamesS wrote:
Secondly, why did the dual layer discs come out unusable? I've burned single layer discs before and they haven't been an issue. Also, I know for a fact that the drive can burn dual layer discs, so that isn't the issue.
Guessing again but it would seem that you burned a Data DVD instead of a Video DVD which would be unusable by a set-top player. As I said above you can't get around DVD standards.
If by any chance your video was HD originally you can try to go the Blu-Ray route using Roxio Toast or FCS 3 (discontinued) or FCP X. You will also need a Blu-Ray burner.

DVD Studio Pro 4 Dual Layer Disc Question - Can Files Be Moved from Top to Bottom Layer?

HI Everyone -
I have authored a dual layer DVD for a feature film with lots of bonus material. I put the layer break in the least intrusive spot where the frame is already still and there is little sound. Layer switch is fine. DVD plays as it should with no problems other than the expected pause during the layer break.
I'd like to have the layer break at a point much earlier in the movie, where it actually goes to black and silence for a moment - a spot DVDSP4 won't let me assign a layer break marker to. I do understand why.
DVD Studio Pro has the movie on the bottom layer of the DVD, I assume because that is the first track I created.
At this point, is it at all possible to move the tracks around where the bonus features take up most of the bottom layer so the less of the movie is on the bottom layer and I can move that layer break up (without completely re-authoring)?
Thank you for your time.
Joe Grisaffi
Houston TX

The fun continues...
The DVD Drive on my 10.6 machine seems to no longer be working...
Maybe this caused/contributed to/resulted in the earlier problem?
Anyone else experiencing similar issues? All hard drives and firewire drives seem to be functioning normally at this time.
My 10.5 machine appears to be eating through the DVD writing process successfully... slowly, but successfully

Please help! why is the DVD burner not burning dual layer media in my G5?

I have tried, unsuccessully, to burn dual layer DVD's on my G5 using the latest iDVD software (iLife '08) but to no avail. I switch to dual layer in iDVD but invaribly, I always get a multiplexing error at the end of the burn. Any suggestions?
Rick

Are there any plans to update OS 10.4.11 to include a firmware update for the DVD drive? Or has it already been changed in Leopard?
Depending on what model of Superdrive you have, there may be a firmware update from the manufacturer, just not from Apple. Updating to the latest firmware from the manufacturer often provides for better media compatibility, faster burn speeds, and sometimes even features that were disabled by Apple's version of the firmware.
DVD-R DL discs have one major drawback if you're using them to burn video DVDs - you have no control over where the layer break is placed. The first layer must always be filled completely before any data is written to the second layer. DVD+R DL does not have this limitation. You can place the layer break anywhere you like, just as long as the first layer is more full than the second.

DVD R replacement with dual layer

Similar Messages

Maybe you are looking for