DVD Recorder D-R18DTKB - Cannot see 'Disc Menu'

I can record things and play them back, but cannot finalise the disc because the 'Disc Menu' does not appear when the button is pressed. The 'Top Menu' appears, but there is nothing when I press 'Disc Menu'. Can anybody help? Thanks

I wanted to provide some clarification.
See the picture below. On the left-hand side is a clip from p.54 of the DVR620 manual, showing the thumbnails visible after pressing the TOP MENU button on the remote. You should see a screen like this if you've recorded at least one thing on the disc, but you've not yet finalized it. On the right is a screen capture of a disc menu seen on my computer using VLC, with a disc that has been finalized. I've actually entered text, whereas the default text for the titles indicate the date and time of the recording.
Which of these types of menus do you see? If the one on the right, it's finalized. If the one on the left, it's not finalized.

Similar Messages

  • Cannot see disc drive after installing boot camp windows 8

    cannot see disc drive after installing windows 8

    the superdrive,  it works fine in osx not in windows 8 on boot camp

  • Cannot see context menu for XML messages with Safari and Google Chrome

    Hi All,
    I am unable to see Context menu with the option of Create, Edit, Delete etc. for KM messages. This problem persists with Safari, Chrome and IE9 browsers. This thing works fine on IE7 and IE8 browesrs.
    On clicking  History and Options buttondoesn't perform any action i.e. we cannot see the list of options when clicking on those. This problem also persists with the above mentioned browsers.
    Also, with IE9 , I am unable to create New message when clicking on New button. The XML form doesnt open on the button click.
    The portal version I am using is EP 7.0.
    Can someone help me out with this?
    Thanks a lot in advance.
    Regards,
    Archana

    Hello Archana,
    You should check the PAM to see if your browser is supported with your current EP verison.
    http://service.sap.com/pam
    Regards,
    Lorcan.

  • HT202213 I cannot see a menu to select advanced in order to set up home sharing. Any advice?

    I am trying to set up home share with my apple tv but I cannot find a menu in iTunes to set up home share? Any advice?

    MC
    http://support.apple.com/kb/HT4557
    I wasn't sure which device you couldn't find the menu on so I have just put the link for ipad, there are links to computer etc on the page.
    Hope it is what you need,
    Jules

  • LSMW Recording.. Cannot see the fields when going to Field mapping step

    Hi all,
    I am going a test loading of data with the LSMW and I am doing with a recording.  The transaction I have used is related to my company. 
    When I go to the field mappings step I dont see the field for the target structure with which I can map the source fields..
    What may be the problem.  Let me know.. If my question is solved, I will award appropirate points.
    Thanks,
       -Ken

    Hi Consu,
    Please see, when your recording is over.. it is displayed right?
    The moment it is displayed, there on same screen either click on 'DEFAULT ALL " button on application toolbar or go to menu path edit--> default all.when u create recording u can click on this button but when it is assigned to your project , this option become disabled , so crate a new recording and follow above steps.
    Best of luck
    Thanks,
    Billy

  • How do you get the display to normal view. Cannot see top menu

    Display seems magnified. How to get it to normal view to be able to see top menus

    Could be because it does not work. It does not work in my Mavericks.
    Joe Bailey wrote:
    I am surprised the article referenced by lllass does not mention the use of the Esc or in some cases Command+Esc to exit full screen mode. It seems a strange ommission of a common technique.

  • Cannot see spry menu properties

    I am using this for the first time along with a few other
    widgets.
    At first if you hover over the menu bar a 'menu title' would
    let you address it and give you the properties box for that widget.
    Although I can get the other types of spry widgets properties to
    display I can no longer display the properties box for the menu
    bar.
    Any suggestion welcome.

    Hi Kin, thanks for your help.
    Yes, neither the <statement> nor <img ...
    @thumbpath... /> are showing in FF.
    I did collapse the insignificant whitespace
    *<statement>
    <![CDATA[ ... ]]>
    </statement>
    as you’ve suggested- but to my eye, there is no change
    when viewed in FF. I removed whitespace directly from the xml doc (
    www.cabeau.com/ly_cabeau/galleries/perforated/perforated.xml
    ) rather than stripping the whitespace via an xsl:stylesheet or,
    using ... xsl:strip-space... which I little understand.
    I have uploaded all relevant files, cleared all cashes and
    temporary data locally;
    there must be something I am missing....
    www.cabeau.com/ly_cabeau/newwork.htm

  • Dead printer screen on printer...cannot see menu etc.

    I have an HP Photosmart Premium C309 Printer/scanner/fax. It is not that old. The small screen is dead, all black so I cannot see the menu etc. How can I fix this. Thank you. Angela

    This should help: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01817193&tmp_task=solveCategory&cc=us&dlc=en&la...
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Cannot see menu

    I cannot see the menu bar after the latest update. I'm running vista 64 bit.

    (Apologies for barging in, ed.)
    when I click on show menu bar - all I get is a gray line below where the apple is  - cannot see any words. Also do not have a menu at the very top of the screen
    That's consistent with trouble with the Segoe UI fonts on your system.
    If you're using Windows XP or Windows Vista, try Vortical's technique from the following post:
    Re: iTunes 10.1 Missing Text
    But if you're using Windows 7, try itunesTRK's suggestion from the following post:
    menu bar invisible
    Can you see the text in the menus now? (If so, follow ed's instructions to get your Source list and other whatnot displaying.)

  • Toshiba DVR620 DVD Recorder/VCR Combo

    Hi! I have a new Toshiba DVR620 recorder to transfer old family VHS tapes to the DVD format.  I am able to record to the DVD ---HOWEVER, the dvd recording displays erratic flashes of sudden brightening of the picture throughout the dvd recording. You can see it on the TV monitor as it is recording. It is too annoying to keep as a video or send copies to the rest of my family. The flashes of brightening occur then it returns to normal light exposure till the next one ---It can occur 3x in a couple of seconds or 1x in 10 seconds. You can still see the video picture. It is like the picture overexposes for split seconds at a time. I took thhe exact tape that did this to the photo center at our CVS Pharmacy and it turned out perfect---no problem at all. I have tried changing the rca cables---it did not help. The TV I monitor it on is a Lg 47 in. flatscreen. This is MY THIRD machine and ALL THREE MACHINES---do exactly the same thing!   CAN"T figure this out! The other two machines were FUNAI very similar to the Toshiba I bought now---I returned both of them.    I use DVD-R DVD Verbatim X8 blanks.  I have tried Taiyo-Yuden JVC DVD -R X8 blank dvd's---same identical problem.  I do have the recorder sitting on top of my old analog TV and 2 old VCRs and a Blu-Ray player. However I do not have these on during operation of the DVD recorder. I note that initially it will display L1---not sure what this is---but like I said I have no problem recording.  The VCR side works perfect---plays the tape exactly like it is no light brigtening flashes at all. I just can't figure this out. I have spoken to Funai and Toshiba support--they don't have any suggestions. I really need to be able to record my own DVD's due to the high expense of sending them to some else to transfer----Anyone have any IDEAS??? electrical intereference  or what?  maybe I should try my old JVC VCR and buy a stand alone DVD recorder---don't know if that would make a difference.
    Solved!
    Go to Solution.

    Some clarifications for you...
    You'll press REC MODE on the remote multiple times to choose the speed to record (XP, SP, LP, EP, SLP). Be sure INPUT SELECT is pressed so that you see either L1 or L2 (but not L3). Then you will press DVD DUBBING to begin the VCR->DVD dubbing. Yes, you can then leave the DVR620 on its own (and turn off the TV or change to a different input on the TV). DVD recording will stop when the VCR encounters blank tape or no picture for 3 minutes, or when the tape runs out. And also, if you run out of recording space on the DVD.
    You can finalize when you come back after the recording is done. Note that if you want to make multiple dubbings onto the same DVD, you don't finalize until after the last recording is made. Once you finalize a DVD+R or DVD-R disc, you can't record on it any more. (You can reformat DVD+RW and DVD-RW and reuse them).

  • Recording a DVD with LG DVD Recorder and FIOS Standard Set Top Box

    I have FIOS Standard Set Top Box, a Sony TV, and an LG DVD Recorder. I cannot figure out how to record a TV program on my LG DVD Recorder. I have 3 remotes: a FIOS Remote, an LG DVD Recorder Remote and a Sony TV Remote. What remote/s should I use, and in what order?  Thanks.

    1) Connect coax (cable) wire from the wall to the RF input on the back of the STB.
    2) Connect coax (cable) from the cable out (might say "to TV/VCR") on the back to the STB to the cable in on the back of the TV.
    3) Connect composite (red, yellow, white) wires from the back of the STB to the input of the DVD player.
    4) Connect composite (red, yellow, white) wires from the back of the DVD player to the back of the TV.
    Let me know if any of those aren't possible based on your equipment. The SD STB (QIP 2500) has very few outputs so there are not a lot of options for a setup like this).
    In order to record a program, you will have to do the following:
    -Set the STB to whatever channel you want to record and keep it on. You will not be able to change the channel, because the DVD player will be recording whatever the STB outputs (the same feed the TV gets). With FiOS, it is not possible to have a DVD do the tuning for you, because it is an all-digital signal and most DVD players can only tune to analog chs 1-99.
    -Set the DVD player channel to "input" or something of the like. This will get your DVD player to show the signal from the STB.
    -Set your TV channel to composite input. This will show you whatever the DVD player is getting from the STB.
    -If you want to watch normal TV without the DVD player, you can turn your TV to Ch. 3 or 4 and get the feed from the STB without having to turn on your DVD player.

  • Cannot play disc

    Hi,
    I created a project in DVDSP. It builds find and says that formatting was successful. However, when I take it to the DVD player it says, "Cannot play disc." It's funny, b/c it plays on my computer DVD player.
    During the build, the log said that it didn't include the VIDEO_TS or HVDVD_TS folder - wondering if this is part of the problem. FYI, this is a copy of the log:
    Warning: The file ‘AB_ROLLER.layout’ found in the VIDEO_TS or HVDVD_TS folder will not be included in the final disc.
    Warning: The file ‘HV000I01.BUP’ found in the VIDEO_TS or HVDVD_TS folder will not be included in the final disc.
    Warning: The file ‘HV000I01.IFO’ found in the VIDEO_TS or HVDVD_TS folder will not be included in the final disc.
    Warning: The file ‘HV000M02.EVO’ found in the VIDEO_TS or HVDVD_TS folder will not be included in the final disc.
    Warning: The file ‘HV001I01.BUP’ found in the VIDEO_TS or HVDVD_TS folder will not be included in the final disc.
    Warning: The file ‘HV001I01.IFO’ found in the VIDEO_TS or HVDVD_TS folder will not be included in the final disc.
    Warning: The file ‘HV001M01.EVO’ found in the VIDEO_TS or HVDVD_TS folder will not be included in the final disc.
    Warning: The file ‘HV001T01.EVO’ found in the VIDEO_TS or HVDVD_TS folder will not be included in the final disc.
    Warning: The file ‘VOB_DATA.LAY’ found in the VIDEO_TS or HVDVD_TS folder will not be included in the final disc.
    Warning: The file ‘AB_ROLLER.layout’ found in the VIDEO_TS or HVDVD_TS folder will not be included in the final disc.
    Warning: The file ‘VOB_DATA.LAY’ found in the VIDEO_TS or HVDVD_TS folder will not be included in the final disc.
    Not sure if it's a simple setting that I'm missing, or what, but this has been bugging me all day.
    I've taken the same quicktime and created it on idvd and it does just fine. what is it with DVDSP that i need to do special?
    thanks.

    You'll find in the General in your Disc settings, in the Inspector Windows (if you click in any empty space of your Graphic View, you'll get you disc in the Inspector window).
    In DVDSP Preferences, in Project settings, you can change the by default setting for new projects.
      Alberto

  • Satellite M70-340: I cannot see the DVD schort cut menu after reinstallation

    Hi,
    I just recently bought Toshiba M70-340 2 weeks ago. Now I learn that there is better Toshiba comparing the my one.
    My question is I cannot see on the screen the DVD schort cut menu. First time when I opened it it was on the rıght handside
    of screen and my machine was Turkish Win XP Home edition. Than I reformat and change into English version of WinXP that comes with in Toshiba recovery CD. But I lost the screen menu for DVD I guess. Now ı don't know how to re-install that option.
    Plus my machine is use the Intel Centrino 1.7 but I am not sure if this is a dual proccess. Secondly the ram is 512MB and I am trying to buy 2GB extened ram but seems still very very expensive (around $1100) Why is that 2GB ram so expensive?
    I am using my laptop for software engineering as well as using Macromedia flash and Adobe Photoshop.
    The both application and MS VS.NET 2005 as well as SQL Server 2000 and SQL Server 2005 application are very slow and sometime it takes more than 30
    min. to compile or open it.
    I have my home PC P4 3.2G with 1GB ram and it's faster than my Toshibe laptop.
    Please be patien with me, after a 5 years later I bought my second laptop and first one was notebook from another manufacture.
    I search in the internet and I find the M70-340 with Turkish Q type keyboard was the best option and it cost me $1450.
    All I need how to overcome my problem and I need someone from Toshiba to explained to me carefully.
    Can someone read my post and answer my question and worries?
    I thank you very much and I looking forward to receive some help.
    Kind Regards,
    NTMS2006

    Hello
    I dont want to disappoint you but please dont expect someone from Toshiba will write to you because this is user-to-user forum. I will try to write some comments because I have the same unit as you.
    This DVD shortcut is really not understandable for me and I really dont know what you are writing about. If the DVD drive is recognized and installed properly it should be listed in device manager and also shown in Windows explorer. If you want to discus about it please describe exact status of DVD drive in device manager and Windows explorer.
    You are right about memory. This notebook is delivered with 512 MB Ram. According the notebook specification it can handle max with 2GB of Ram and if you want to use max please use 2x1GB module. Compatible one is DDR2-400/533 1GB (PA3411U-1M1G).
    2GB modules are the newest and everything new is very expensive. I dont know how much it can costs but definitely not around $1100. For this money you can buy the whole notebook.
    The list of used software is impressive and I am not wondering if the notebook runs slow. Upgrade it to max Ram and it will be much faster. Please dont compare your desktop with this mobile unit.
    Pick up info how much costs PA3411U-1M1G memory module and use two of them for max RAM. You will see that unit will run faster and I hope you will be satisfied with performance.
    Have a nice day!

  • Has I Tunes removed burn to disc from the menu, only I cannot see it any more

    Has I Tunes removed burn to disc from the menu, only I cannot see it any more ???

    Les @ i tunes wrote:
    Has I Tunes removed burn to disc from the menu, only I cannot see it any more ???
    Les, It is still there.  Make sure that the playlist you plan to burn is open.

  • I connected my Ipad 2 to the TV by the HDMI cable. I can see mp4 videos stored in my Ipad but I cannot record them on the DVD recorder which is connected to the TV by a SCART connection. In which way can I store my videos avoiding to fill the Ipad memory?

    Is it possible to record videos stored in Ipad2 on a DVD recorder or external HDD?

    Connect the phone by USB to the computer, import with image capture, iPhoto or whatever application you use to import movies, drop it into iTunes.

Maybe you are looking for