DVD recovery disc creator error

Hiya,
I have a toshiba L300 series laptop running vista, which basically just crashes as soon as I load it up as soon as I try to do anything in normal mode (it runs perfectly in safe mode). I'd like to reboot my system obviously!
Basically when I try to run the recovery disc creator, just over half way through creating the first disc I get the error message:
'Failed to read the following file.
F:\06491XSP.swm
(error code:020150-20-00000000)'
Any help would be much appreciated,
thanks,
Olie

Hi!
Firmware updates you can get on the Toshiba website but for your Satellite A300 with Mat****a drive I didnt find one.
Have you tried DVDs from different manufactures? I use always Verbatim disks and never had problems with it.
Check this!
Bye

Similar Messages

Satellite U400 Impossible to create recovery DVD with Recovery disc creator

Hi,
I have a Satellite U400 (few years old), and I never created the recovery DVD.
Now I want to do it, but for some reasons, when I launch Toshiba recovery disc creator, nothing happens...
The partition with the recovery files is there, as well as the folder HDDRecovery. I did add some files to this partition, could this be the problem ?
Thanks for your help.

It is big problem now if the Toshiba tool cannot find the files.
How it works you can read on http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=140985
Check it out please.
What you can try now is to check if HDD recovery installation will start - http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm but Im afraid the same problem will occurs again.
To be honest you should install Win7 32bit on this small Satellite notebook. It works perfectly. Forget original Vista OS, Win7 works better.

Cannot start Toshiba Recovery Disc Creator on my Satellite A300-15K

Hi! I'm from Poland so my English is a little poor.. (but I hope that is sufficient)
My problem:
I haven't Recovery disc (DVD) because I don't use earlier Toshiba Recobery Disc Creator (when all in my laptop was good).
Now I haven't do this disc because when I start Toshiba Recovery disc Creator I have a error:
" Program Launch RDC and create INI files for RDC Recovery partition _przesta? dzia?a? (ceased to operate)_
error details:
Nazwa zdarzenia problemu: APPCRASH
Nazwa aplikacji: TRORDCLauncher.exe
Wersja aplikacji: 1.0.0.1
Sygnatura czasowa aplikacji: 4682674e
Nazwa modu?u z b??dem: WIMGAPI.DLL
Wersja modu?u z b??dem: 6.0.6001.18000
Sygnatura czasowa modu?u z b??dem: 4791a7a6
Kod wyj?tku: c0000135
Przesuni?cie wyj?tku: 00009cac
Wersja systemu operacyjnego: 6.0.6001.2.1.0.768.3
Identyfikator ustawie? regionalnych: 1045
Dodatkowe informacje 1: 9d13
Dodatkowe informacje 2: 1abee00edb3fc1158f9ad6f44f0f6be8
Dodatkowe informacje 3: 9d13
Dodatkowe informacje 4: 1abee00edb3fc1158f9ad6f44f0f6be8
Przeczytaj nasze zasady zachowania poufno?ci informacji:
http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0415

Hi
Did you change anything on your notebook?
I mean if your HDD recovery partition has been changed or the data o thin partition has been deleted?
To be honest for me it looks like the OS issue. I think its not a single tool issue but I think the operating system has been muddled up
Maybe you should try to recover the notebook using the Toshiba HDD recovery option and after the new OS installation on the notebook you could try to create the recovery disk again.
In order to start the recovery you have to press the F8 immediately after the notebook has been powered up. Then you should choose the first option called Repair My Computer.
This would lead to a new window and there you could choose Toshiba HDD recovery.
But note; this recovery would format the whole HDD so maybe you should backup some data before you would start this procedure.

Recovery Disc Creator does not list any discs for creation

Brand new NB200-10G (this a UK model). When I run TOSHIBA Recovery Disc Creator it does not show any discs for creation and the CREATE option is greyed out so I cannot create the discs. Now... when I first got it I did not have a USB DVD writer with me but I ran RDC out of curiosity to see the devices it might offer. At that time it DID list discs to be created but I cancelled out. I get the impression the program thinks it has created the discs and I believe I read somewhere that it will not create the discs more than once. I think it must have set a switch in the registry or .ini files somewhere to indicate that the discs have been created. If so does anyone know how to "undo" this? Drive D (data) and hidden partition *appear* to be intact.
If this is not possible then I guess I could try the "press key 0 at power up" method to restore to original install setting and this might then enable me to create the discs but I'm concerned that if the restore fails in a destructive way that I might be left without a working PC. TIA Ken
Solved!
Go to Solution.

OK all fixed!
Restore using key 0 at power up worked fine and cured the ToRDC problem. It then let me produce 2 copies of the restore DVD. Don't know what caused the problem... issue CLOSED.
Ken

Satellite L500D PSLK0A Toshiba Recovery Disc Creator does not run correctly

Hi,
I am trying to create a recovery disc for my Toshiba Satellite L500D PSLK0A-00U009.
When I run the Recovery Disc Creator it begins to open then it comes up with a box with an exclamation mark then it says 'Can not open target partition'. Then the Recovery Disc Creator will open. It then appears normal then when I insert a CD to being the process it looks as though it is going to work then it says Error and stops and ejects the CD the Error is code is: 0E01B5-26-510444D9
I have already uninstalled then program then reinstalled it using a download from the MyToshiba website and this did not fix the problem.
Any suggestions?

Hi
Did you try different disks from different manufactures?
How about the usage of USB flash memory stick? As far as I know you can create an bootable USB Recovery flash stick too.

Re: Recovery disc creator cannot be launched

Hi,
I'm having problem with my recovery disc creator, an error occured "No HDD recovery area!\nThe recovery disc can not be launched." when i'm trying to create a back-up disc.
Need help. What do i need to do?
Many thanks.
kenji
Solved!
Go to Solution.

if you have formatted the disc then you have completely removed the hdd partitions. im sure you have figured this out but im going to say it anyway. this is the exact reason your toshiba user's guide tells you to make recovery media first before anything else is done on the laptop. with that out of the way you can order recovery media from toshiba for $25 by calling 1(800)457-7777 or ordering online here csd.toshiba.com/cgi-bin/tais/support/jsp/serviceUnitVerification.jsp?orderType=SFF
-civicman4-
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Post all info about your laptop and version of windows. We are working on it but still do not have the powers to read your mind.

Win7 64 bit (original pre-installed) ,32 bit dvd recovery disc

I've just bought new notebook from toshiba L500-208 recently. And i absolutely have no idea how to deal with this new stuff! Please help me!
I had one NB from compaq for 5 yrs, when i format window just use 1 cd and this finish!
But now what i dont understand is i have win7 64 bit (when i bought), but i have 32 bit recovery disc.
I want to know if i format notebook and use this recovery disc, i will lose 64 bit, right?
What if i want to have 64 bit for next installation, what i have to do? please help me too..
thank you so much!

Hello
The whole situation is quite simply. If you check PC and notebook market you will see that more and more new products will be offered with 64bit operating systems.
So the software production goes slowly in this direction.
Toshiba offers you brand new notebook with 64bit operating system but also offer you 32bit version if you feel comfortable with it and if you want to use some software not designed for 64bit operating systems.
Your notebook is delivered with HDD recovery image and if you read users manuals you can find info that you should create own recovery DVD.
This can be done with preinstalled Toshiba recovery disc creator. The shortcut for this tool you can find on desktop.
So, before you do anything please create this installation disc. After doing this you can install 32bit version and use it so long you want.
When you want to have 64bit version again use self created recovery disc for installation.
I hope you understand now how it works.
If you have more questions please let me know.

Toshiba NB200-10z - recovery disc creator.lnk isn't available

Hello, I have a problem with my netbook Toshiba NB200-10z, when I run Toshiba recovery disc creator I get the window with:
The unit or network connection to which the link refers "recovery disc creator.lnk isn't available.
Make sure that the disk is properly inserted or the network resource is available and try again
How can I fix it?

Since this is an English language forum you should post the message in English language.
I assume you are not able to start the Recovery disk creator software
Why?? Who knows.
Try to recover the notebook using HDD recovery option:
Press F8, choose Repair my Computer, and HDD recovery.
If this would not be available or possiblewell you will need to try to order a recovery disk from Toshiba or would try to install the system using another disk

Satellite A300D-126 Recovery Disc Creator

Hello,
can anyone tell me from where i can download the recovery disc creator for my toshiba. I have format the laptop and i am running windows xp sp2.
Thank you

I think you have erased the recovery image by formating the laptop. Right?!
But you can order a backup media here

Satellite A300: Does TRDC Reminder & Toshiba Recovery Disc Creator work after Win 7 upgrade?

Hello,
I am sorry for bad English.
Satellite A300.
Conducted updating to Win7 on the program Toshiba Upgrade.
Does this program work;
TRDC Reminder and Toshiba Recovery Disc Creator after updating to Wins7?
The program TRDCReminder did not find "Renewal of computer".
On the program Toshiba Recovery Disc Creator was created and that incomprehensible?
If is not it these programm how to recover computer in the case of failure?
Does Tempro work in Win7?
Many thanks.
With kind regards.
Igor.

Good evening.As*** - Enormous thank you for an answer.Before updating to W - s7, I created disks reanimator with Vista.Is there a question in that, how to create the disks of reanimator on W - s7? in default of the corresponding programs?I understood that in the case of accident:1.Restore to Vista 2.Repeatedly to set W - S7 ?Really are not there other paths?On Vista the system was reinstalled from a hard disk.There was possibility to create the disk of renewal.W - S 7 AS ? Tempro after a refixturing ?????:To run out term of guarantee, did 6 months pass ? Enormous Thank you for patience. With kind regards. Igor

Satellite L300D - Recovery disk creator error

I have a Satellite L300D and need to put it back to the original settings.But the recovery disc didnt work (C:\Program Files\TOSHIBA\TOSHIBA Recovery Disc Creator\TRORDCLauncher.exe The specified path does not exist).Now i dindt know what to do.

I had the same issue when purchased my lap, I tried to install Win Xp and didn't make a recovery disk. I installed from Windows copy disk and got drivers/utilities from [Toshiba Driver Page|http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp]
You can also do like this or oder [Recovery disk|https://backupmedia.toshiba.eu/landing.aspx] from Toshiba but for money

Portg Z30-A-182 - Recovery Media Creator Error

Hi,
I have a brand new Portg Z30-A-182, have installed my office and virusscan and now want to create a set of Recovery DVD's using Recovery Media Creator.
I use a Samsun external DVD-writer and DVD+RW disc's.
I keep getting the error 0E01BA-49-00000000 when the software wants to start writing to the DVD.
I searched the internet and this seems an error which occurs frequently and does not get solved using other type of discs.
How do I solve this error ?
I saw that I can BUY a set of recovery discs with Toshiba online, but that can not be the purpose with a brand new pc ???

Can you plese test functionality when you try to create recovery USB stick?
I have machine without ODD too and I have created recovery USB. It is for me more komfortable than using DVDs.
By the way: in the past i have created recovery DVDs using DVD-R medias only.
Check also this thread.

Toshiba Recovery Media Creator Error Code 020150-20-00000000 (Satallite L755-S5308)

We just received 2 - Toshiba Satallite L755-S5308 Laptops over the thanksgiving holiday from Best Buy and the first thing we normally do after powering up the laptops is to create our recovery disc sets to DVD's. However, both laptops are giving the same error message on both machines at the same point in the creation of the Recovery DVD Disc 4 when using the Toshiba Recovery Media Creator. Please See Eror Message Below:
Failed To Read The Following File.
D:\ZZImages\ZZImages\Preinst18.swm
(Error Code: 020150-20-00000000)
If you are getting this error message then you will not be able to restore your laptop factory software and operating system (Windows 7 Home Premium 64-bit)

You could create an image of the entire HDD onto another drive, but this can be a headache for a lot of users and would require specialized hardware and a HDD enclosure. As such, it's not a feasible solution.
Oh,come now. You can buy 'specialized hardware' -- an HDD enclosure -- from a widely known online computer store for $12.99 with free shipping, and a spare plain old Seagate 500 GB hard drive (nothing very special about it, except that it costs more since the flooding in Thailand) running at 7200 rpm from a different widely known online computer store for $99.99 (shipping extra). Seagate gives away its branded version of Acronis True image for free. It is not that hard to use. I believe the L755 has a 500 GB 5400 rpm hard disc drive, so this Seagate may make the laptop run faster under some conditions. Creating an image of the laptop HDD onto this 2nd HDD mounted in the enclosure may take hours, but consider the only other alternative, below:
Anyone who thinks that solution is not feasible can just wait until their one and only hard disc drive fails or develops a software problem. Without usable recovery discs, the machine must be dropped off or mailed to a service center. Compare the waiting and the expense to have someone else solve that kind of problem with the effort and expense of preventing it. If you don't mind being without your computer for a few days or weeks, go for the simple way.
By the way, even the best home-burned optical discs are prone to develop unexpected failures after they are created. I've never had a factory pressed optical disc properly stored develop a late failure. If these work out of the box, they work a couple of years later. The technologies behind a home-burned disc and a factory-pressed disc are different.
Getting back to my original point, should your 1st HDD fail, and should you have a 2nd HDD with the cloned image of the 1st HDD, your recovery takes as long as it takes to remove HDD #1, installed HDD #2, and reboot your laptop, involving about 5 minutes of your time and perhaps a small screwdriver. You can test whether or not your cloned backup works the same way, by installing HDD #2 and seeing if it works. If you only have a single HDD, there is no good way to test your recovery media, since they overwrite your original HDD.

HP Recovery Disc Creation Error

I just bought a new HP Pavilion 500 desktop AMD Elite Quad Core A8-6500 8GB memory 2TB hd, and I am trying to create recovery discs as recommended by the system using DVD+R (Memorex Brand) discs to complete this process. The program comes up, checks the disc I insert and tells me which type I have and that it will take 3 discs to complete the progess.
It then appears to be creating disc number 1.
However after completion, it says it is verifying the disc and then after about 15 minutes puts up an error message.
"An error occured while creating the disc. Try a new disc or choose a different high quality brand of disc and make sure all applications arre closed."
This whole process wastes about 30 minutes. However, I can see in windows explorer that the disc has been created and has files on it. I rebooted, started over and was able to create disk 1. Disk 2 would always error out at the end of the process. I spent hours last night trying 6 different disks until I gave up on Disk 2. Thinking I have a bad PC or drive, I tried ripping cd's and playing movies, all seemed to work ok.
I was really frustrated until I saw that 5 years after this 2009 post people are still having the exact same issue! So it is not just me.
I am giving up on recovery disks because I have already spent too much time and disks on it.
I will try the recovery usb and if that fails move on.

Additional information is below. I was surprised to see so many people with HP products having exactly the same problem. The recovery disk problem is very frustrating because you have to wait so long for it to error (30-45 min.) and it looks like it is working right up to the point it errors out at the end of the disc writing process.
1. Product name - HP Black 500-214 Desktop PC with AMD Elite Quad-Core A8-6500 Accelerated Processor, 8GB Memory, 2TB Hard Drive, purchased and unboxed yesterday
2. OS - Windows 8.1
3. Error Message - "An error occured while creating the disc. Try a new disc or choose a different high quality brand of disc and make sure all applications are closed."
4. Any changes made - No changes, this was right out of the box after I set up window 8.1.

Recovery Media creator error windows 8

Hi;
while i'm trying to creat recovery disc on DVD an error happend and i want to fix it
plaese help me i don't have any backup
Attachments:
بدون عنوان.png ‏30 KB

What laptop do you have, and what error do you receive?
- Peter

DVD recovery disc creator error

Similar Messages

Maybe you are looking for