DVD:Rip error

Hello,
I'm trying clustering ripping for backup my dvd with dvd::rip.
This work until at the end i have message like this:
Command exits with failure code:
Command: execflow ssh -o PreferredAuthentications=publickey [email protected] "umask 0002; mkdir -m 0775 -p '/home/atlas/divx/DH-DVD2-5-8/avi/001/audio-video-psu' && `which nice` -n 19 `which nice` avimerge -i /home/atlas/divx/DH-DVD2-5-8/avi/001/chunks-psu-01/* -o /home/atlas/divx/DH-DVD2-5-8/avi/001/audio-video-psu/DH-DVD2-5-8-001-av-psu-01.avi -p /home/atlas/divx/DH-DVD2-5-8/avi/001/audio-psu-01/DH-DVD2-5-8-001-audio-psu-01-00.avi && rm /home/atlas/divx/DH-DVD2-5-8/avi/001/chunks-psu-01/* '/home/atlas/divx/DH-DVD2-5-8/avi/001/audio-psu-01/DH-DVD2-5-8-001-audio-psu-01-00.avi' && echo EXECFLOW_OK"
Output: scanning file /home/atlas/divx/DH-DVD2-5-8/avi/001/chunks-psu-01/DH-DVD2-5-8-001-00000.avi for video/audio parameter
[avilib] V: 25.000 fps, codec=XVID, frames=11, width=624, height=352
merging audio /home/atlas/divx/DH-DVD2-5-8/avi/001/audio-psu-01/DH-DVD2-5-8-001-audio-psu-01-00.avi track 0 (multiplexing) into 0 ...
AVI open: avilib - AVI file has no video data
with allready at the end a similary message:
AVI open: avilib - AVI file has no video data
I have try different compress, xvid4, x264, ffmpeg too ...
But yet the problem, could you help me please
Thanks a lot
Last edited by atlas95 (2007-05-14 05:59:25)

/usr/lib/transcode/export_divx4.so: cannot open shared object file: No such file or directory
I think this is the problem
why dont you use xvid?
Last edited by Vamp898 (2009-10-02 11:25:46)

Similar Messages

Dvd ripping error...help

Ok so i tried to rip Hostel and this thing popped up.
I/O Error!
Device blah blah blah
I dont want to type out the whole thing. Can someone tell me what happened?

Your ripping software can't break the encryption, would be my guess.
Find something else to use, go to whatever software you used support forum or go really illegal and bit torrent it.

Dvd::rip transcode/libdvdread error [SOLVED]

Job 'Process title #15' failed with error message:
Job 'Rip - title #15' failed with error message:
It seems that transcode ripping stopped short.
The movie has 182817 frames, but only 22300
were ripped. This is most likely a problem with your
transcode/libdvdread installation, resp. a problem with
this specific DVD.
The wiki makes it seem so easy to use dvd::rip! I put my disc in, started a new project, began the rip and got this. As far as I can tell, my system is up to date and has all the deps for dvd::rip in good order. I've never changed a thing with transcode (I didn't even know I had it installed before I got this error). What is wrong?
P.s. Is there a way to tell if a DVD is encrypted? This would be helpful to me since dvd::rip and its kin don't work with encrypted movies.
Last edited by Xs1t0ry (2010-02-27 01:47:55)

You see this doc: http://wiki.archlinux.org/index.php/DVD_Playing

DVD rip to iPod on Windows

Im sorry, i have seen this asked before, but the only ones i saw were ways with mac programs. Can somebody give me a link or tell me a step by step way to rip my DVDs and then convert them to a iPod format that is completely free, and i can convert a whole movie without paying for a converter. Thanks.

well thank you for reading adn doing some searching.Luckily for mac users the process isnt as cumbersome adn troublesome for windows users. I have always used this software to convert my dvds to be played on the ipod and have had no troubles and no errors. here is the website for the software adn related info about it and a website on how to convert a DVD using this software.
**FOR MAC USERS ONLY NOT FOR WINDOWS!**
http://handbrake.m0k.org/
directions
http://howto.diveintomark.org/ipod-dvd-ripping-guide/
good luck
GFF =)

DVD rip DVD Final Cut Express 4.01 - can't import

I don't know what to do, I am really lost on this. I've tired various rip dvd pass. But just plain LOST
The formate I guess when it is ripped goes to .VOB ? Is that right. But anyway I can't seem to drag it into FCE. I've had various error message something like frame rate error and other errors. I've tried various things so much. I went out and bought FCE 4. Because I thought I would have less headaches.
So I have a DVD of a underwater diver and he is using my music. So I want to separate each segment of the scenes he has in his DVD. Then rip them and use them for a resume. He gave me the go ahead. But I just don't know what would be the best dvd rip app. I tried handbrake. But it seems that the files that come from there don't import into FCE 4.
I basically am very lost on all this and not sure how to explain exactly.
Any help would be appreciated.
Thanks

Is this what you're doing?
http://www.fcpbook.com/Video6.html

IMac - external DVD drive crashes Aimersoft DVD Ripping program

I am using Aimersoft DVD ripping software (legal version) to make mp4 files out of DVDs. It works fine on the IMac internal DVD drive. But when I try and use an external DVD drive using FW800/400 conversion cable, Aimersoft program keeps crashing.
Any thoughts?

Peter,Welcome to Apple Discussions.
Here are some alternative choices for playing DVDs.
If the LaCie drive USB or FW?
Tiger is serious improvement over 10.1 (although you may need some more RAM) I'm not sure whether it will cure the DVD player issue? If you still have space (9Gb) on your 40Gb drive you could use Mac the Ripper, and then open the VIDEO_TS file in DVD Player.
mrtotes

DVD Player error -69902?

I've successfully played DVDs on my iMac (24" 2.4 GHz Aluminum) -- Front Row works like a charm! However, I've recently encountered a DVD that has issues with my computer:
A couple of weeks ago I received the Beatles' "Help!" two-DVD set in timely fashion after ordering it through Amazon.ca. Unfortunately, although the second disc works perfectly on my computer (a 2007 Apple iMac 24" 2.4 GHz Intel Core Duo with 2 GB of RAM), the first disc will not play past the FBI warning and the opening page (where Play, Subtitles, Settings, Chapters is located). Whether I use either Front Row or DVD player, the result is the same: when I insert the disc into my computer, I am presented with the error message "Skipping Over Damaged Area". If, in DVD Player, I click on "Title" in order to change chapters, an error message pops up informing me "DVD Player encountered a system error. Error -69902". And in DVD Player, I am informed that this disc contains only one chapter. In any case, when I'm on the Help! opening page & I click on "Play" (in either DVD player or Front Row), nothing happens. No movie. The music keeps looping on the opening page, but not much more than that.
Out of curiosity, I tried playing this same disc on a standalone Toshiba DVD player hooked up to my home TV, and amazingly, the disc plays fine!
After emailing Amazon, I was instructed to return the DVD for a replacement, which arrived in the mail today. Imagine my surprise when the replacement displayed the same error messages! Before I return this disc for a refund, maybe someone can fill me in: what is DVD Player error -69902?
Message was edited by: Captain Maniac

Faulty disc

What is the best DVD-ripping software for mac?

what is the best DVD-ripping software for mac?

Handbrake to copy to avi or mp4(I use it for watching my DVD's on the go, so my battery lasts for a longer time)
I think MP4 is better quallity.
To copy a DVD: simply use Toast (maybe withe popcorn, but I don't use it).
But, be legal! This is a forum, and anyone can see your posts!

How do I get past "can't find valid dvd player" error?

This is regarding a G4 powermac running Tiger 10.4.3
My Sony dual layer DRX-720UL/T seems to work fine with DVD-ROM content. My kids use it for DVD-ROM games and I had no problem installing Tiger. Problem comes in when I open "DVD player" and get a "Can't find valid dvd player," error. They're connected via Firewire 400, and I've tried the USB link, just to see, but the same error comes up. I'm fairly certain that I viewed a DVD before upgrading to Tiger. The Sony is supposed to be fully mac compatiable, and even comes with Toast light 6. Again all seems to be well except for the fact that DVD player won't allow me to view a NTSC DVD. No matter how many I try.

What drive was in this G4 prior?
If you did not have a DVD drive, you need to use Pacifist to extract & install DVD Player.app; downloading or drag&drop won't work.
Also, Sony drives are probably the worst when it comes to compatability; one specific model may work fine, and others not. This should be less of an issue in Tiger, but only if the problem is other than the optical drive firmware, about which you can do nothing (on a Mac), unlike Pioneer & NEC drives that have mac-based flashers available.
If DVD Player was installed previously, based on having a DVD drive prior to Tiger install, you may want to try running the 10.4.3 Combo updater over your existing install.

Failed while scanning for CD/DVD drives, error 2355

Failed while scanning for CD / DVD drives, error 2355.
Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
D: Unsupported CD or DVD drive.
Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
As far as I know I do NOT have a virtual drive on this pc.
Any help???

Failed while scanning for CD / DVD drives, error 2355.
Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
D: Unsupported CD or DVD drive.
Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
As far as I know I do NOT have a virtual drive on this pc.
Any help???

Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the "Add or Remove Programs" control panel...

I have done all the steps that I could find, and I am still having this issue...can someone help me please?
Here is the diagnostics test I just ran as well. Not sure why it wont read my ipod either.
Microsoft Windows Vista Home Basic Edition Service Pack 2 (Build 6002)
Dell Inc. Inspiron 1525
iTunes 11.1.5.5
QuickTime not available
FairPlay 2.5.16
Apple Application Support 3.0.1
iPod Updater Library 11.1f5
CD Driver Not Available
CD Driver DLL Not Available
Apple Mobile Device 7.1.1.3
Apple Mobile Device Driver 1.62.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 00D5BEA809F38F28
Current user is an administrator.
The current local date and time is 2014-04-05 12:39:11.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:        {F45D6408-EDE8-4F4F-8BDF-AE815F918114}
Description:            Dell Wireless 1505 Draft 802.11n WLAN Mini-Card
IP Address:             192.168.0.16
Subnet Mask:          255.255.255.0
Default Gateway:    192.168.0.1
DHCP Enabled:      Yes
DHCP Server:         192.168.0.1
Lease Obtained:     Sat Apr 05 12:21:08 2014
Lease Expires:       Sat Apr 05 13:21:08 2014
DNS Servers:         68.105.28.12
                                68.105.29.12
                                68.105.28.11
Adapter Name:        {8F15FB4D-2EE6-4690-A8E7-82ACBF7A4F1E}
Description:            Marvell Yukon 88E8040 PCI-E Fast Ethernet Controller
IP Address:             0.0.0.0
Subnet Mask:          0.0.0.0
Default Gateway:    0.0.0.0
DHCP Enabled:      Yes
DHCP Server:
Lease Obtained:     Wed Dec 31 17:00:00 1969
Lease Expires:       Wed Dec 31 17:00:00 1969
DNS Servers:
Active Connection: LAN Connection
Connected:             Yes
Online:                    Yes
Using Modem:        No
Using LAN:             Yes
Using Proxy:           No
Firewall Information
Windows Firewall is off.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2014-04-05 12:38:45.
**** CD/DVD Drive Tests ****
LowerFilters: PxHelp20 (2.0.0.0),
No drivers in UpperFilters.
Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the “Add or Remove Programs” control panel.
**** Device Connectivity Tests ****
iPodService 11.1.5.5 is currently running.
iTunesHelper 11.1.5.5 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) ICH8 Family USB Universal Host Controller - 2830. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2831. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2832. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2834. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2835. Device is working properly.
Intel(R) ICH8 Family USB2 Enhanced Host Controller - 2836. Device is working properly.
Intel(R) ICH8 Family USB2 Enhanced Host Controller - 283A. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
RICOH OHCI Compliant IEEE 1394 Host Controller. Device is working properly.
Most Recent Devices Not Currently Connected:
iPod touch (4th generation) running firmware version 6.0.1
Serial Number:       CCQH8BRSDT77
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.

CD Driver Not Available
CD Driver DLL Not Available
With that one, I'd start with solution 3 from the following document:
iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install

DVD RAM errors every time on U205

I have a Satellite U205-S5002 and every time I try to burn data to a DVD it errors just as it is finishing. Any ideas on how I can fix this?
thanks (in advance)
Solved!
Go to Solution.

Looks like the problem was I was using DVD+R instead of DVD-R. Now it works fine...

Every time I start iTunes I get a missing CD/DVD software error.

Installed new CD/DVD burning software and now every time I start iTunes I get a missing CD/DVD software error. I've repaired iTunes twice.

Try removing and reinstalling all the Apple software using:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

Help, DVD burning error

hello, I have been getting DVD burning error messages for the last two days. I have been getting the message "disk burning failed because an unexpected error occurred. there was also a message about not enough laser power to calibrate. I have tried slower speeds, a different brand of DVDs and a DVD Lens cleaner and still no luck. It started on christmas eve with Tiger and it's been doing it for the last two days on Leopard with the same system.

I created the same Topic, you can try looking for it. I just went and got my superdrive replaced, seemed to work ok.

Dvd::rip using only 1 instead of 4 cores

Hello, fellow Archers!
I've installed dvd::rip today and started transcoding my DVD's... And I saw a problem: It only uses one core at a time. The processor (I guess that it's not the program, which does that) is swapping the core being used every few seconds, but I can only see one core being pushed to it's 100%. Can I (and - if so - how to do that) set it up to use all 4 cores? It should speed up the process.
I'm using it's default programs (mplayer, xine, etc.), although I'm using mplayer-vaapi. Is that the cause? Should I swap to default mplayer? Or maybe it's related to my system settings? Does it install all the programs to support 4 cores by default, or should I set something up?
Cheers!
TurekPolski
Last edited by turekpolski (2012-02-22 23:00:33)

Have you tried HandBrake?

DVD:Rip error

Similar Messages

Maybe you are looking for