DVD::RIP Stops Responding [SOLVED]

Howdy,
I have just started to use DVD::RIP to try and backup some of my DVDs to XViD/DiVX. However, everytime I try to rip one, DVD::RIP it seems to stop responding while it is trying to generate a preview image of the ripped movie. The application can still be moved around within, tabs changed, but the ripping area items remain greyed out. The status bar at the bottom stops updating, however the log files continue to update with the amount of time the process has been running. According to the website, "This usually takes a few seconds, unless you're in the on-the-fly or DVD image mode, where this may need a minute." I am not in either of the above modes, I am using the application suggested RIP to Hard Drive mode. I have waited several times up to 15 minutes for this process to complete without any change. I was wondering if anyone might be able to help me out? Or point me to a better solution for DVD ripping and transcoding. Thanks.

I can't help you solve your problem with DVD::Rip, but I'd suggest you give HandBrake a try. It is a really easy to use command line tool for ripping and encoding DVDs and is by far the fastest DVD-ripper I've found. Quality is very good as well and it does stuff like detect cropping values automatically and very reliable. There's a precompiled binary for Linux on their forums if you fear to compile it on your own. You could also try Avidemux which a friend of mine suggested. He says it's the best tool for ripping DVDs, but I haven't tried it myself since I'm really satisfied with handbrake.
There's also Thoggen, Winki The Ripper, OGMRip and probably many more others. But they can't compare to Handbrake IMHO.

Similar Messages

Fresh install keybinds stop responding [solved]

Hi there,
I've recently been having some issues with Arch. I did a fresh install because I'm running on a chromebook and need as much space as possible only have a 14GB SSD at present until I get round to upgrading it.
I previously installed Arch (i386) with no such issues, but I've recently switched to i3 WM and x86_64 using this: https://wiki.archlinux.org/index.php/Ch … tion_media. Last week I also installed a custom chrome patch
https://wiki.archlinux.org/index.php/Ch … .27_Script and everything was working fine with this. I did a fresh installion of Arch about an hour ago and I'm mentioning this because it allowed me to install Arch 64bit directly from the dual ISO without having to modify the ISO itself so I'm not sure if that's the issue considering the 32bit installation worked from the same ISO.
Now I have some strange issues. Keybinds work fine when I boot up but when I open urxvt it seems to stop all my binds working. Similarly the same issue happens when I run dmenu and open chrome. Sometimes I can open multiple instances of the aforementioned before it stops working. The mouse icon changes as if it's trying to load something, but nothing opens and absolutely no binds work.
I've tried other WM's and get the same issues with urxvt and dmenu.
I have searched google but can't seem to find any related issues so I'm at a loss as to where to begin.
Any help would be greatly appreciated.
Thank you.
Last edited by Gwynplaine (2014-11-20 16:24:37)

It seems that the use of dmenu causes things to hang. I'll reboot and wait a few minutes and see if it automatically does it.
I have not modified any files since installation except enabling wicd and slim with systemctl and the modifications to .xinitrc.
Thanks for the information. I'll bear that in mind.
Edit:
So I rebooted and left the system for five minutes. After that I ran dmenu using alt+d (as defined in i3 config). Dmenu would not open and changed the mousekey to the loading icon and no other bindings would work again.
So I believe that the issue is definitely with dmenu.
Edit 2:
So a little bit more information on dmenu. I have installed it with every installation. My system is 64bit and I have enabled multilib. I installed it through pacman.
I'm going to disable multilib and re-install.
Edit 3:
Same issue. Actually seems worse now.
Edit 4:
I'm wondering if it could be due to this section of .i3/config?
# start dmenu (a program launcher)
bindsym $mod+d exec dmenu_run
# There also is the (new) i3-dmenu-desktop which only displays applications
# shipping a .desktop file. It is a wrapper around dmenu, so you need that
# installed.
# bindsym $mod+d exec --no-startup-id i3-dmenu-desktop
Edit 5:
Okay so after some testing it seems to be i3. I've re-installed, using the i3-git package from AUR. I'm installing Yeganesh and I'll see now how this plays out.
Last edited by Gwynplaine (2014-11-20 01:57:48)

LXDE and Compiz Desktop partially stops responding [Solved]

ok,
So I decided to install Compiz on an LXDE install, don't ask me why I was bored. Well everything about it is running great, except that when ever I open a file or folder on the desktop it opens fine and I close it. I go to open a folder on the desktop and it will not open to save my life. So far it seems only libre documents will open consistently, but folders not so much. Any ideas? The folders will open once I have to logout of X and log back in and I can open one folder and close it and it reproduces the error every time.
Last edited by mich04 (2012-02-04 16:49:14)

So I figured out that it was because I had full directories on the desktop instead of shortcuts, thus it was causing the desktop to freeze.

[SOLVED]MacBook Air (3,2) keyboard and trackpad stop responding int...

Hey guys, I've now got arch running on my air perfectly I think, except for a random loss of trackpad and keyboard input. It happens even with a usb keyboard. I'm not sure if the whole laptop is freezing or only the inputs stop functioning, I believe it is the latter because things that blink or move onscreen like the cursor keep blinking. It happens both in X and out. I have no idea where to start for diagnosing.
My current kernel line is this:
options "ro root=LABEL=arch arch noapic irqpoll acpi=force noefi"
I'm using nouveau but it also happens using fbdev. I can't get nvidia to work, it just blacks out the screen when starting X.
Any hints are welcome
EDIT: It just happened again, this time just after I clicked on a tab in firefox. I hit refresh, so the spinning circle came up on the tab, and the windows partially reloaded, then the mouse pointer stopped responding. The loading circle then stayed spinning indefinitely with the page failing to load any further.
Further information:
I removed noapic, irqpoll, arch (is that even a valid kernel option?) and noefi from the kernel line for this boot so that all that was left was acpi=force and it still booted happily. I'm not sure if I need any of those, I can't remember why I added them, probably to fix this keyboard issue. I'm booting through rEFInd so maybe I shouldn't have that noefi entry anyway.
Last edited by MisterAnderson (2013-05-20 05:30:28)

Solved, I removed all boot options and I'm guessing one of them was causing it.

Creating a DVD with IDVD stops responding

I am creating a movie from VHS it has audio on it I start in Imovie HD and export it to IDVD 6 it goes all the way through untill it says processing audio and then IDVD stops responding. I Transfered the movie Liar Liar to DVD and it worked fine However I cant get my home movies to work.
Power Book G4 1.67 GHZ 1 GB SDRAM Mac OS X (10.4.8) Input Sonr DVD/VHS with Moviebox DV
G5 Imac Mac OS X (10.3.8)

I read the other topics I have a 2hr video and I let it run 20 hrs I thought that was a little long I'll let it run a while longer and see.
On a personal note this *****!
I use 4 macs in my recording studio and I am happy with the performance in the audio world I guess I need to go bigger to do video.

Dvd::rip transcode/libdvdread error [SOLVED]

Job 'Process title #15' failed with error message:
Job 'Rip - title #15' failed with error message:
It seems that transcode ripping stopped short.
The movie has 182817 frames, but only 22300
were ripped. This is most likely a problem with your
transcode/libdvdread installation, resp. a problem with
this specific DVD.
The wiki makes it seem so easy to use dvd::rip! I put my disc in, started a new project, began the rip and got this. As far as I can tell, my system is up to date and has all the deps for dvd::rip in good order. I've never changed a thing with transcode (I didn't even know I had it installed before I got this error). What is wrong?
P.s. Is there a way to tell if a DVD is encrypted? This would be helpful to me since dvd::rip and its kin don't work with encrypted movies.
Last edited by Xs1t0ry (2010-02-27 01:47:55)

You see this doc: http://wiki.archlinux.org/index.php/DVD_Playing

When I enter the website, Firefox stops responding and I have to end the process from the Task Manager. How do I solve this problem?

I am running Firefox 4.0 beta 7 on Windows XP Tablet Edition OS. When I enter this site using Firefox, the browser stops responding and I have to end the process using Task Manager. However, when I open it with other browsers such as IE8, I am able to view the site as per normal. This only happened when I updated my browser to Beta 7 and I did not have such problems in the previous betas.

There is [[Flash]] content on that page.
Do you have a problem with Flash on other websites?
Create a new profile as a test to check if your current profile is causing the problems.
See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

IMAC suddenly stops working Mouse,keyboard, wifi all stops responding. PLEASE HELP

iMAC suddenly stops working,display is on but key board and mouse does not respond.I changed keyboard with usb also but still same.even wifi stops working also.PLEASE HELP before there was some kernel panic errors , i updated every thing, installed an original osx mountain Lion. taken to Apple service center. They found nothing wrong with hard ware. But i am having still the same problems. It just stops responding to keyboard, mouse even wifi goes off some time. I thought it may be keyboard mouse problem so i changed them to normal usb keyboard and mouse but still the same. PLEASE PLEAE HELP. -------- LAST ERROR REPORT IS BELOW Interval Since Last Panic Report: 687085 sec Panics Since Last Report: 2 Anonymous UUID: 48C67BCC-4ADB-0131-8FCC-DBD9C01FBB0C Fri Jul 19 17:23:01 2013 panic(cpu 0 caller 0xffffff80096b8655): Kernel trap at 0xffffff7f8a53f351, type 14=page fault, registers: CR0: 0x000000008001003b, CR2: 0x0000000000000060, CR3: 0x000000000bf36000, CR4: 0x0000000000000660 RAX: 0x0000000000000000, RBX: 0x0000000000000000, RCX: 0x0000000000000018, RDX: 0x0000000000000004 RSP: 0xffffff8089c4ba60, RBP: 0xffffff8089c4ba80, RSI: 0x0000000000000060, RDI: 0x00000000ffffff8f R8: 0x00000000000000ff, R9: 0x0000000000000019, R10: 0xffffff8074831004, R11: 0x0000000000000008 R12: 0x0000000000000000, R13: 0xffffff807482e0ec, R14: 0x00000000ffffffff, R15: 0x0000000000000000 RFL: 0x0000000000010297, RIP: 0xffffff7f8a53f351, CS: 0x0000000000000008, SS: 0x0000000000000010 Fault CR2: 0x0000000000000060, Error code: 0x0000000000000000, Fault CPU: 0x0 Backtrace (CPU 0), Frame : Return Address 0xffffff8089c4b700 : 0xffffff800961d626 0xffffff8089c4b770 : 0xffffff80096b8655 0xffffff8089c4b940 : 0xffffff80096ce17d 0xffffff8089c4b960 : 0xffffff7f8a53f351 0xffffff8089c4ba80 : 0xffffff7f8a525ff5 0xffffff8089c4bac0 : 0xffffff7f8a53a352 0xffffff8089c4bb50 : 0xffffff7f8a50da56 0xffffff8089c4bbb0 : 0xffffff7f8a4e5c36 0xffffff8089c4bbf0 : 0xffffff7f8a4e71b4 0xffffff8089c4bc20 : 0xffffff7f8a547d3c 0xffffff8089c4bc50 : 0xffffff7f8a4fad5b 0xffffff8089c4be00 : 0xffffff7f8a4f8a9e 0xffffff8089c4be40 : 0xffffff7f8a4fee0e 0xffffff8089c4be80 : 0xffffff7f8a5454df 0xffffff8089c4beb0 : 0xffffff7f8a58c82e 0xffffff8089c4bf00 : 0xffffff8009a4b1ab 0xffffff8089c4bf60 : 0xffffff800963e25e 0xffffff8089c4bfb0 : 0xffffff80096b3137 Kernel Extensions in backtrace: com.apple.driver.AirPort.Atheros40(600.72.2)[EBF8D6E8-59C6-3C1C-9549-32DDA193B1 D2]@0xffffff7f8a4ad000->0xffffff7f8a5f5fff dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f89c83000 dependency: com.apple.iokit.IO80211Family(530.4)[E86BEE31-8EE0-34BE-A53F-2571D85CC628]@0xff ffff7f8a43e000 dependency: com.apple.iokit.IONetworkingFamily(3.0)[F02560D1-ADE6-3AD9-8D05-43CB2B7C8B87]@0 xffffff7f89ddc000 BSD process name corresponding to current thread: kernel_task Mac OS version: 12E55 Kernel version: Darwin Kernel Version 12.4.0: Wed May 1 17:57:12 PDT 2013; root:xnu-2050.24.15~1/RELEASE_X86_64 Kernel UUID: 896CB1E3-AB79-3DF1-B595-549DFFDF3D36 Kernel slide: 0x0000000009400000 Kernel text base: 0xffffff8009600000 System model name: iMac10,1 (Mac-F2268DC8) System uptime in nanoseconds: 397672779228 last loaded kext at 256566570174: com.apple.filesystems.msdosfs 1.8.1 (addr 0xffffff7f8b624000, size 65536) last unloaded kext at 363393284081: com.apple.filesystems.msdosfs 1.8.1 (addr 0xffffff7f8b624000, size 57344) loaded kexts: com.apple.filesystems.smbfs 1.8.4 com.apple.driver.AudioAUUC 1.60 com.apple.driver.AppleHDA 2.3.7fc4 com.apple.driver.AppleMikeyHIDDriver 122 com.apple.driver.AGPM 100.12.87 com.apple.driver.AppleHWSensor 1.9.5d0 com.apple.driver.AppleUpstreamUserClient 3.5.10 com.apple.kext.AMDFramebuffer 8.1.2 com.apple.driver.AppleMikeyDriver 2.3.7fc4 com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0 com.apple.driver.AppleLPC 1.6.0 com.apple.driver.AppleBacklight 170.2.5 com.apple.driver.AppleMCCSControl 1.1.11 com.apple.ATIRadeonX2000 8.1.2 com.apple.iokit.IOUserEthernet 1.0.0d1 com.apple.iokit.IOBluetoothSerialManager 4.1.4f2 com.apple.Dont_Steal_Mac_OS_X 7.0.0 com.apple.driver.ApplePolicyControl 3.4.5 com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport 4.1.4f2 com.apple.filesystems.autofs 3.0 com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1 com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1 com.apple.BootCache 34 com.apple.driver.AppleIRController 320.15 com.apple.iokit.SCSITaskUserClient 3.5.5 com.apple.driver.AppleUSBCardReader 3.1.7 com.apple.driver.XsanFilter 404 com.apple.iokit.IOAHCIBlockStorage 2.3.1 com.apple.driver.AppleUSBHub 5.5.5 com.apple.driver.AppleFWOHCI 4.9.6 com.apple.driver.AirPort.Atheros40 600.72.2 com.apple.driver.AppleRTC 1.5 com.apple.driver.AppleAHCIPort 2.5.2 com.apple.nvenet 2.0.19 com.apple.driver.AppleUSBEHCI 5.5.0 com.apple.driver.AppleUSBOHCI 5.2.5 com.apple.driver.AppleEFINVRAM 1.7 com.apple.driver.AppleHPET 1.8 com.apple.driver.AppleACPIButtons 1.7 com.apple.driver.AppleSMBIOS 1.9 com.apple.driver.AppleACPIEC 1.7 com.apple.driver.AppleAPIC 1.6 com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0 com.apple.nke.applicationfirewall 4.0.39 com.apple.security.quarantine 2.1 com.apple.driver.AppleIntelCPUPowerManagement 196.0.0 com.apple.driver.DspFuncLib 2.3.7fc4 com.apple.iokit.IOAudioFamily 1.8.9fc11 com.apple.kext.OSvKernDSPLib 1.6 com.apple.driver.IOPlatformPluginLegacy 1.0.0 com.apple.driver.AppleSMBusPCI 1.0.11d0 com.apple.driver.IOPlatformPluginFamily 5.3.0d51 com.apple.driver.AppleBacklightExpert 1.0.4 com.apple.driver.AppleSMBusController 1.0.11d0 com.apple.kext.AMD4600Controller 8.1.2 com.apple.kext.AMDSupport 8.1.2 com.apple.iokit.IOSurface 86.0.4 com.apple.iokit.IOSerialFamily 10.0.6 com.apple.iokit.IOBluetoothFamily 4.1.4f2 com.apple.driver.AppleGraphicsControl 3.4.5 com.apple.iokit.IONDRVSupport 2.3.7 com.apple.iokit.AppleBluetoothHCIControllerUSBTransport 4.1.4f2 com.apple.kext.triggers 1.0 com.apple.iokit.IOFireWireIP 2.2.5 com.apple.driver.AppleSMC 3.1.4d2 com.apple.driver.AppleHDAController 2.3.7fc4 com.apple.iokit.IOGraphicsFamily 2.3.7 com.apple.iokit.IOHDAFamily 2.3.7fc4 com.apple.iokit.IOUSBHIDDriver 5.2.5 com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.5 com.apple.iokit.IOBDStorageFamily 1.7 com.apple.iokit.IODVDStorageFamily 1.7.1 com.apple.iokit.IOCDStorageFamily 1.7.1 com.apple.iokit.IOSCSIBlockCommandsDevice 3.5.5 com.apple.iokit.IOUSBMassStorageClass 3.5.1 com.apple.driver.AppleUSBMergeNub 5.5.5 com.apple.driver.AppleUSBComposite 5.2.5 com.apple.iokit.IOAHCISerialATAPI 2.5.1 com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.5 com.apple.iokit.IOUSBUserClient 5.5.5 com.apple.iokit.IOFireWireFamily 4.5.5 com.apple.iokit.IO80211Family 530.4 com.apple.iokit.IOAHCIFamily 2.3.1 com.apple.iokit.IONetworkingFamily 3.0 com.apple.iokit.IOUSBFamily 5.6.0 com.apple.driver.NVSMU 2.2.9 com.apple.driver.AppleEFIRuntime 1.7 com.apple.iokit.IOHIDFamily 1.8.1 com.apple.iokit.IOSMBusFamily 1.1 com.apple.security.sandbox 220.3 com.apple.kext.AppleMatch 1.0.0d1 com.apple.security.TMSafetyNet 7 com.apple.driver.DiskImages 345 com.apple.iokit.IOStorageFamily 1.8 com.apple.driver.AppleKeyStore 28.21 com.apple.driver.AppleACPIPlatform 1.7 com.apple.iokit.IOPCIFamily 2.7.3 com.apple.iokit.IOACPIFamily 1.4 com.apple.kec.corecrypto 1.0 Model: iMac10,1, BootROM IM101.00CC.B00, 2 processors, Intel Core 2 Duo, 3.06 GHz, 4 GB, SMC 1.53f13 Graphics: ATI Radeon HD 4670, ATI Radeon HD 4670, PCIe, 256 MB Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463235363634485A2D3147314631 Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463235363634485A2D3147314631 AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.72.0-P2P Bluetooth: Version 4.1.4f2 12041, 2 service, 18 devices, 1 incoming serial ports Network Service: Ethernet, Ethernet, en0 Network Service: AirPort, AirPort, en1 Serial ATA Device: Hitachi HDE721010SLA330, 1 TB Serial ATA Device: HL-DT-ST DVDRW GA11N USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0x24400000 / 2 USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0x26500000 / 2 USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x04500000 / 4 USB Device: USB Keyboard, 0x04f2 (Chicony Electronics Co., Ltd.), 0x0111, 0x04300000 / 3 USB Device: Microsoft Notebook Optical Mouse with Tilt Wheel, 0x045e (Microsoft Corporation), 0x00d2, 0x04100000 / 2 USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000 / 2 USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0x06110000 / 3

That panic was not caused by third-party software. If the problem is recurrent, the possibilities are:
A stale or corrupt kernel cache
A damaged OS X installation
A fault in a peripheral device, if any
Corrupt non-volatile memory (NVRAM)
An internal hardware fault (including incompatible memory)
An obscure bug in OS X
You may already have ruled out some of these.
Rule out #1 by booting in safe mode and then rebooting as usual. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
You can rule out #2 and #3 by reinstalling the OS and testing with non-essential peripherals disconnected and aftermarket expansion cards removed, if applicable. Sometimes a clean reinstallation (after erasing the startup volume) may solve a problem that isn't solved by reinstalling in place, without erasing.
Corrupt NVRAM, which rarely causes panics, can be ruled out by resetting it.
If your model has user-replaceable memory, and you've upgraded the memory modules, reinstall the original memory and see whether there's any improvement. Be careful not to touch the gold contacts. Clean them with a mild solvent such as rubbing alcohol. Aftermarket memory must exactly match the technical specifications for your model. Memory that is either slower or faster than specified may be incompatible.
The Apple Hardware Test or Apple Diagnostics, though generally unreliable, will sometimes detect a fault. A negative test can't be depended on. Run the extended version of the test.
In the category of obscure bugs, reports suggest that FileVault may trigger kernel traps under some unknown conditions. Most, though not all, of these reports seem to involve booting from an aftermarket SSD. If those conditions apply to you, try deactivating FileVault.
Connecting more than one display is another reported trigger for OS X bugs.
If your system is not fully up to date, running Software Update might get you a bug fix.
In rare cases, a malformed network packet from a defective router or other network device can cause panics. Such packets could also be sent deliberately by a skillful attacker. This possibility is something to consider if you run a public server that might be the target of such an attack.
If none of the above applies, make a "Genius" appointment at an Apple Store to have the machine tested. You may have to leave it there for several days. There isn't much point in doing this unless you can reproduce the panic, or if you can't, it happens often enough that it's likely to be repeated at the store. Otherwise you may be told that nothing is wrong.
Print the first page of the panic report and bring it with you.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you know how to restore, and you have at least two independent backups.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
*An SSD doesn't need to be zeroed.

Firefox 4 appears to be causing my graphics card to stop responding for no reason, since upgrading to 4.0.

I'm not sure if its a common occurance for other users, but since the 'hardware accelerated support' with Firefox 4 release, firefox seems to regularly cause my graphics card (Nvidea GT320M) on my laptop to 'stop responding' for a few seconds every so often, usually when I have flash websites such as youtube open. It isn't a huge deal since it restarts working again after a few seconds of a black screen, but its annoying non-the-less.
An example of such: earlier today i started up firefox 4, and when it was loading the tabs, the screen turned black, and when the screen came back on, pop up in the windows task bar told me that the graphics card had stoped responding but successfully recovered. Not the first time, but becoming a more regular occurrence.

You seem to be running older versions of Flash and Java plugins. I'd recommend you update to the latest versions first of all to see whether the problem persists or not.
The easiest way to check is to go to the [http://www.mozilla.com/en-US/plugincheck/ Plugins Check] page.
If that fails to solve the problem, try running Firefox in [[Safe Mode]]. If it works correctly in that configuration, then one of your add-ons is the culprit.

IE 11 Does not load pages and "Stops Responding" After 11/26/2013 Windows Update

I have Windows 7 Pro 64 bit. IE 11. (Doesn't matter if I try to open 32 or 64 bit IE)
I keep Automatic Updates on and they install as soon as they are available.
Everything on my PC was running fine 11/25/13.
I came to it 11/26/13 after Windows Updates ran and now whenever I open any webpages, it does not load the web page 100%, no hyperlinks can be clicked on and once you attempt to click on anything. I get the "IE 11 has stopped responding" bubble.
It also seemed to affect Firefox which does not completely load pages either.
Any shove in the correct way to help solve this would be helpful.

Robert -
Anyone who has gathered over 13,000 points is certainly to be respected as being super smart and uber helpful. However, your response is inadequate on two counts.
First, "stopped working" is not an inexact phrase, nor is it a euphemism trotted out by a newbie who hasn't the skill to describe the problem accurately. "stopped working" is an exact part of the error message issued by Windows. Of course it would
help if Windows would issue error messages that are more useful, but that is a different issue. For the purposes of this discussion, "stopped working" as part of the exact error message is a useful piece of information.
Second, despite your excellent suggestions for hunting down the problem, I'm guessing that few people here have the time or inclination to be beta testers for Microsoft. Even if the exact cause is found, it is not likely that anyone here will
be able to fix the problem. There are literally hundreds of people complaining about this problem in multiple forums. If you know your consumer behavior metrics, then you know that means tens of thousands are affected. This is systemic, not
a random problem on a few errant machines. Microsoft needs to know that they have a major problem on their hands and they need to fix it. I saw this problem starting with IE 10. Is it any wonder that in that time, IE usage has fallen greatly
while Chrome has become the dominant browser? (The only reason I am bothering to write instead of just shifting to Chrome is that Chrome also has its bugs, one of which affects a web app I use several times a week, so I need a functioning version of
IE.)
So thanks Robert for all your help in the past, but this response isn't helpful.
Microsoft, are you listening? Fix your browser.

Firefox stops responding for about 30 seconds after hitting Enter on any website's search bar, even the built in Google search or when signing into Facebook.

As the title says, I run Firefox Beta 6 and just reinstalled Windows 7 Professional on my system due to seriously messed up Windows update, and when I downloaded and installed Firefox, I noticed every time I searched using the Google search next to the URL bar, FF would freeze for about 30 seconds to a minute, with nothing running in the background and no other programs running. I also disabled all Add-Ons and it still continues to act up, so that leads me to believe it's a FF issue, but even on every other website when using the search bar as soon as I hit enter, it locks up and stops responding then goes back to normal about 30 secs later, or if I sign into Facebook it does the same, and even when I had the FF 5 Beta before I had to reinstall I never had a problem.

I managed to solve this problem as my computer has been giving me problems lately and completely froze on me the other day thanks to Game Booster Beta 3 and completely screwed with Windows 7 to the point I almost had to reinstall again, but I managed to fix all my problems and if you would just follow my link here over to my post on Seven Forums then it would be easier then explaining it again.
http://www.sevenforums.com/system-security/180714-windows-7-professional-64-bit-logs-but-almost-frozen-3.html#post1550277 The reason for this is if you shut down your computer while running Firefox, it's possible you corrupted your User Profile for FF and if you follow my instructions you can repair it instead of making a new, so just follow the link, read my post and if you have anymore problems just message me on Seven Forums. Have a nice day and hopefully you get it all fixed. :b

Firefox stops responding while loading a specific website

Whenever I open firefox and immediately try to load the website http://www.espncricinfo.com/ , firefox stops responding. But if I try to load this site after browsing some other sites, the problem seems to resolve automatically. The website loads without any problem in Chrome or IE. I encountered this problem first with firefox 14 and with firefox 15, the problem persists.

Start Firefox in [https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Safe Mode] and check it again to see if one of the your extensions or hardware acceleration is the problem.
Do not click the Reset button. If the problem does not happen in Safe Mode see : [https://support.mozilla.org/en-US/kb/troubleshoot-extensions-themes-to-fix-problems Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems ]
thanks again

When I try to view my full att bill firefox stops responding and closes ALL pages. I have to open explorer to view it!

I am trying to view my ATT wireless bill, and when I ask to view the full version it opens another window and says receiving data from ATT. This doesn't ever change and when I hit any key on any other window in firefox then I am told that firefox has stopped responding and must close.

No release of Pages v5 can open AppleWorks, Pages '05, Pages '06, Pages '08, or RTF documents. Sometimes, it cannot open its own documents.
You will need to do one of the following:
Borrow your MacBook Pro back until you can export all your incompatible documents to MS Word (Which Pages v5 can open)
Install your iWork '08 DVD on your new Air, and then immediately apply the following Apple Updaters. Again Export to MS document formats.
Pages v3.0.3
Numbers v1.0.3
Keynote v4.0.4
Purchase iWork '09 DVD, and then immediately update with Apple iWork 9.3 updater.
Open the document(s) that Pages v5 won't permit
Save as Pages '09 v4.3 documents, or export as MS Word
Upload to Zamzar, and convert to MS Word (free for limited volume)
No sensitive documents
Email notification within 3 - 4 minutes with MS Word document download link
After you do either item 2 or 3, run Disk Utility and verify/repair application permissions on your boot drive. Open your converted documents in Pages v5.

Firefox stops responding for 15s when starting downloads.

Every time I start a new download, Firefox will stop responding for around 15 seconds. During this time, nothing happens, my CPU usage spikes, and many downloads will subsequently fail if they do not support a resume feature. This is extremely frustrating. I have tried reinstalling, disabling add-ons, and clearing my download history daily, all to no avail. I'm tempted to switch back to Firefox 3.x. I know this doesn't apply here, but Nightly does the same thing.
I've got a C2D @ 3.16, 8 GB DDR2 1066, and a WD VelociRaptor 300 GB HDD as my primary (where files are saved temporarily), so I know it's not the system that's struggling.

I managed to solve this problem as my computer has been giving me problems lately and completely froze on me the other day thanks to Game Booster Beta 3 and completely screwed with Windows 7 to the point I almost had to reinstall again, but I managed to fix all my problems and if you would just follow my link here over to my post on Seven Forums then it would be easier then explaining it again.
http://www.sevenforums.com/system-security/180714-windows-7-professional-64-bit-logs-but-almost-frozen-3.html#post1550277 The reason for this is if you shut down your computer while running Firefox, it's possible you corrupted your User Profile for FF and if you follow my instructions you can repair it instead of making a new, so just follow the link, read my post and if you have anymore problems just message me on Seven Forums. Have a nice day and hopefully you get it all fixed. :b

Firefox stops responding when scroling down on youtube.

when i go to youtube and don't scroll down everthings find but if do there a 60% chance that it will stop responding and crash. and i have uninstalled and refreshed firefox and no changes am getting to the point of leaving firefox if i can't fix it

'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that temporarily turns off hardware acceleration, resets some settings, and disables add-ons (extensions and themes).
'''If Firefox is open,''' you can restart in Firefox Safe Mode from the Help menu:
* Click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
'''If Firefox is not running,''' you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
When the Firefox Safe Mode window appears, select "Start in Safe Mode".
;[[Image:SafeMode-Fx35]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, theme, or hardware acceleration. Please follow the steps in the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.

DVD::RIP Stops Responding [SOLVED]

Similar Messages

Maybe you are looking for