DVD-ROM created in DVDSP does not show files in Windows

Hello,
I created a DVD-ROM in DVD Studio Pro 4 with the purpose of having a working DVD and also have additional files in that same disk. It all works fine in a Mac; I can watch the DVD, and I can also access the additional files (one .pdf and one .mp4) from the Finder. The DVD also works fine in any DVD player.
However, when I put the disk on a Windows computer, I can only watch the DVD movie, but the additional files DO NOT appear in Windows Explorer. If I open the dvd drive on a Windows computer, there's only the AUDIO_TS and VIDEO_TS folders, and nothing else.
Does anybody have an idea of what's going on here? PLEASE HELP.
Thank you.

This is an m2v file playing on the windows machine. Of course I would have preferred to run with a mac, but the end display software does not run on a Mac.
Windows Media Player, using the commonly(?) installed Klite Codec Pack which includes and mpeg2 decoder, shows it as having a length of 6:38.
VLC will play it as well, but shows not timecode on a windows machine.
The whole movie is there and I can scrub until the end in WMP. In fact Windows Media Player will play it to the end. And as it hits the end, the timecode should show 10:00 minutes, but it does not, it shows 6:38. On a Mac it shows 10:00 minutes
The end movie is to play in software (Windows Samsung's Magic Info Pro) that loops when the end time code is reached. Which it thinks is 6:38. The only problem is that it loops at 6:38 of the original movie which is not the end of the movie.
Sounds like a relativistic spacetime problem.
Before I get slammed for asking Windows related questions -- I put this in the compressor forum to see if there was some compressor setting I was not enabling, or some tweak that I could do to make an m2v file windows friendly.

Similar Messages

  • Mapped Drive B:\ to a network share but does not show up in Windows Explorer.

    I mapped drive B: to a network share but it does not show up in Windows explorer.  I can go to the drive by typing b:\ but is not visible in explorer.  But if I login as local admin it shows up in windows explorer.  Any suggestions?

    Hi Lloyd Reeves,
    Based on my research, I would like to suggest the following:
    Disconnect the mapped drive and map it again.
    Ensure the user is using an administrator account; or change another user account to have a try.
    Create  a shortcut for a share folder and see if it will disappear.
    In addition,  it would be helpful for future troubleshooting if you could help to collect the following information:
    Which method did you use to map drive?
    Was there any error message in the Event log? If so, please provide the      detailed information.
    For your information, please refer to this similar case:
    http://social.technet.microsoft.com/Forums/windows/en-US/6acab187-c46c-4ff9-8604-196c64ea8995/mapped-drives-not-visible-in-explorer-although-shown-in-map-network-drive?forum=w7itpronetworking
    Regards,
    Lany Zhang

  • Bridge does not shows file info, just thumbnails, what's going on? already adjusted in preferences, but still only thumbnails and not the info of the file

    Bridge 8.5 does not shows file info, already adjusted in preferences but still just showing thumbnails only.
    Can anyone please help?
    Thanks

    The single download means that you won't be able to redownload it from the store without paying, either on a computer's iTunes or an iOS device - it doesn't stop you from copying the audiobook to your other computers or syncing it to your iOS devices, you just can't redownload it. (I believe that they are all supplied to Apple by audible.com, so I assume that it's them requiring the one-time download.)
    You can download audiobooks on your computer's iTunes and sync them to iOS devices, you do not have to buy them directly on the device (if you do then you can copy them back to your computer's iTunes library by connecting the device and using the File > Devices > Transfer Purchases menu option on your computer's iTunes).
    What you are doing to sync them should work i.e.
    - connecting the iPad to your Mac
    - selecting the iPad on your Mac's iTunes
    - selecting its Books tab and selecting the audiobooks that you want to sync to the iPad and syncing/applying that selection.
    You should then get an audiobooks option in the Music app on your iPad. If they aren't appearing there  then do they show in Settings > General > Usage > Music on the device - if you have audiobooks on the iPad then they should be listed there under an 'audiobooks' heading.
    By 'restart the iPad' do you mean a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
    You could also try closing its Music app via the iPad's taskbar : Force an app to close in iOS.
    And do a soft-reset and retry syncing.
    I assume that music and other items sync ok ?

  • I tried to open a folder in my Documents. It does not show in any window but does show up when I am half way between windows. It did the same thing when I tried to empty the trash. It asked if that was what I wanted but I could't say yes because it was or

    I tried to open a folder in my Documents. It does not show in any window but does show up when I am half way between windows. It did the same thing when I tried to empty the trash. It asked if that was what I wanted but I could't say yes because it was or

    what is your question/issue here? did the folder have any content in it to begin with? screen shots of what you may be seeing?
    if english isn't your native language, write it in what you are most comfortable speaking in to describe your issue.

  • Edu DVD in computer iTunes but does not show up in iPad iTunes or iPad video.  How do I make the DVD contents available on the iPad?

    Educational DVD added successfully to computer iTunes but does not show up in iPad iTunes or iPad video.  How do I make the DVD contents available on the iPad?

    Thanks!  For whatever bizarre reason for which I have no answer - I sync'd my iPad to my MBP the old fashion way (not iCloud) and the movie showed up just fine.  It is Nikon camera 'how to' video. I like to watch them for a better indepth discovery of what the camera can do.  The only weird thing about the hard wire sync is that it was placed in a catagory "home movies" which was never there before...actually it showed up in two places "home movies" and TV shows.
    So, thanks anyway!  Pretty cat!
    Mona

  • Named Criteria created, but it does not show up in the Data Controls view

    Hello there,
    I wish to use a data-bound ADF Mobile ListView in one of the pages on the app. However, only entries of the underlying data that fulfill a certain condition shall be displayed in the list. The condition basically is an "Equals" test against a bind variable in the pageFlowScope. Therefore, I have created a corresponding Named Criteria for the data control - proceeded like described here:
    https://blogs.oracle.com/adf/entry/create_named_criteria_in_ejb
    The Named Criteria, in my case, has been created and saved, yet it does not show up in the Data Controls view of JDeveloper. Therefore, I cannot drag it on a UI element to use it.
    I only have the "Operations" folder where the quick guide above also shows a "Named Criteria" folder.
    Refreshing or restarting JDeveloper did not solve this.

    It was all taken care of by Gaurav Aggarwal
    He got me all fixed up, Thank you for your concern.
    Daniel Walters

  • Ipod does not show up in Windows or Itunes! tried everything!

    Here is the problem:
    This is a new problem. Ipod worked fine on this computer until recently.
    Ipod 5th gen does not show up in My Computer or Itunes.
    It seems that it happend after I installed the latest update to Itunes.
    What is happening:
    When Ipod is plugged into my USB (the same one I always used before) it never shows up in my computer or itunes and always says "Do Not Disconnect" never stops!
    What have I tried:
    I plugged it into my friends laptop! It worked fine. Window found it.
    I then used updater on it
    I did the 5 r's over and over again. Nothing
    I have reinstalled Itunes and tried that a few times
    I tried different USB ports, nothing
    I tried putting other items in my USBs and they work fine
    IPOD just refusses to be seen on this computer again.
    Any ideas? Thanks. This comp has my library and it is the one I use daily.

    Thanks! But I actually figured it out! Right after I said something about the driver, I went into device mangager. Sure enough even though it did not show up as a drive letter the device manager said is was installed and working.
    So I deleted the device out of device manager. Restarted and plugged it in. Although I go some weird error. It found the IPOD and now Itunes sees it.
    I believe that killing the process would have done the same thing as you stated.
    Thanks to all for taking the time to answer these issues. It beats the apple store or tech support.

  • Copy does not show File 2 metadata in Nikon View NX

    A picture opened in Photoshop CS4 11.0.1 and saved as a copy jpeg (after color correction) when opened in Nikon View NX 1.5.2 does not show the
    metadata with shutter speed, lens aperture, etc. However, that same picture shows the original info in Photoshop (File info > camera data). I wrote Nikon and they claimed Photoshop and other third part apps "ruin the shooting data." Opinions? Suggestions? Thanks
    Macbook Pro 2.16gHz OSX10.5.6 gRAID 2TB.

    Well the problem is that, in Windows, the menu bar is owned by the application. When you view the PDF in the browser, the browser owns the menu bar and chooses what to show. Hence it shows only the browser items and not the Reader menus. If you view it outside the browser, Reader is running stand-alone and shows it's menu items.
    I think, all you can do is show make sure the button bars you want are exposed by default.

  • In Photoshop Element 9, when opening the Organise section, the top bar does not show File, etc.?

    Just reinstalled Photoshop Ele,ents 9 onto Windows 7.
    In the Editt part,on opening, all is well.  This clearly show the top bar where youcan call and enter from the file to work with items on your computer.
    However, on the Organise section, this to bar does not show at all, therefoere you are unable to do any work as you cannot import items from anywhere.
    How do I get this to work now.

    You should ensure your font/text size is 100% or 96 dpi in the Windows control panel or you may need to adjust the native screen resolution of your monitor. Alternatively try keyboard shortcuts to access the menus.
    File – Alt+f
    Edit – Alt+e
    Find - Alt+i
    View – Alt+v
    Window – Alt+w
    Help – Alt+h

  • New I Mac- safari does not show the URL window- help!

    My safari does not show the website address window, but everyone else in the family shows it. How do I fix this so that I can view the address window. Thanks.

    HI John,
    From the Safari Menu Bar click View/Customize Toolbar.
    Drag the default Toolbar up or individual items.
    Carolyn

  • Ipod does not show files

    Please help! - my ipod (80gb classic/black) all of a sudden does not show any of my music at all (nor photos etc). I have restored it on iTunes, yet the files are still absent, and when I plug it back in iTunes does not recognise it - and regularly becomes unresponsive and freezes. I erased the ipod on disk utility, but since doing this I cannot erase it again - it will not unmount. The iPod also makes a clicking noise which I presume is its hard drive.
    Is this a problem with my Mac - ie iTunes files, or does it sound like a physical problem with the ipod itself?
    Thanks for your help, Tim Stoner

    Stonertim,
    Clicking noise is usually a sign of a failing hard drive, I would take it (Your iPod) to your local Apple store and let them take a look at it.
    Weston

  • Ticket created on ECC does not show on SM7.0

    On ECC PROD, select help->create support message, fill up info and save, a support message is created.
    Because we have an SM7.0 based CHARM configured for above ECC landscape. The ticket created above should show up at that SM7.0 in txn crm_dno_monitor. However, it is NOT showing up.
    By the way, on the CHARM system (i.e. SM7.0), support message created as said above, will show up in crm_dno_monitor.
    Could you help tell how to fix this issue?
    Thanks a lot!

    Hi,
    This issue is  related with your RFC connections it seems.
    Please check that RFC connection from ECC PRD to SOLMAN is working fine.
    Revert after checking RFC connectivity status.
    Regards,
    Gagan Deep Kaushal

  • Import images grid does not show file extension

    I use Aperture in a "referenced" mode. At times, I have jpeg files in the same folder as my nef files (which had already been imported into Aperture). The import images list does not have (or I cannot find out how to display) the file name that shows the file extension too. Of the data available, i can scroll to the right and see a lot of different metadata in the list, but not the file extension.
    Does anyone know how to have the file extension displayed in the list that is shown when trying to import?
    thanks

    Aperture can display just about anything you would like to display. The key is putting the correct field into the metadata set for that is being used for the browser or viewer that is active (you can have two ready to go and switch between them or none with a shortcut key)
    This should tell you everything you ever didn't want to know
    [Aperture Metadata Display|http://photo.rwboyer.com/2008/08/aperture-and-metadata-display>
    RB

  • Files copied as .lnk files to usb and does not show up in Windows

    When I copy files from the MBP to a USB disk, instead of copying the files as is, the Mac converts the files into a .LNK file, which then shows up as "shortcuts" rather than the copied file in Windows. Why is this?

    same here.. it happened after installing Lion and updating iTunes
    My nano does not appear on iTunes or desktop, however it charges.
    iPod nano 2nd Gen
    Mac OS X Lion 10.7
    iTunes 10.4
    please don't tell me that Apple added my lovely nano to Black list !!

  • Ls -l does not show files unless used in a shell script

    Our backup script is generating files called BACKUP.01.04.05 (the 01.04.05 is a generated date). Well the files do not show up when using ls-l at the command line, except for the ones generated in 2000 (e.g. BACKUP.00.01.01). But if I put echo|ls -l in a script then the files do show up in the listing. We are running solaris 2.7. Any ideas? Thanks!

    Hi there,
    The behavior you described sure does not seem to make much sense.
    Is it possible if the 'ls' in your command line is aliased to
    something which might explain the behavior?
    Also, echo|ls -l should not make a difference, I don't think ls takes
    any input from the pipe. I assume that the 'ls' you run from the
    shell script is different than the one you run from your command
    line. The 'which ls' command will show if your ls is aliased.
    Hope this helps.
    Hae
    Sun Technical Developer Support

Maybe you are looking for