DVD-Rom drive in Satellite C655-S5128 not working properly in Windows 8

I recently upgraded my system from Windows 7 to Windows 8. However, the DVD-Rom drive after the upgrade no longer works properly -- it now treats the pre-recorded disk as if it was completely blank. I tried reinstalling the Toshiba Disc Creator, but that did not work.
Any solution?

You apparently did not use the Toshiba Upgrade Assistant in upgrading to Windows 8. See HERE for DVD and Disk Creator problems occurring during the upgrade and solutions.
C.B.
Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit

Similar Messages

CD/DVD drive of Satellite A30 does not work properly

I have a satellite A30 - 921, but for some reason the cd/dvd has stopped working. In Drivers folder it says "driver corrupt/missing. (Error code 39). It will not roll-back or update either. Do i need to download the driver ( it is Toshiba dvd-rom SD-R6112) again & if so how/where? I cant use the recovery or installation disc as it wont read the drive. Any ideas pls.

So, you want to tell that your CD/DVD-drive is defective and you cannot read from it nor recover your system.
To download drivers you should take a look here:
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
Otherwise I suggest you to bring your machine to an authorized service partner for a hardwarecheckup. If your drive is really defective then it should be replaced.
If you need some help to find a service partner, then click on this link to find the nearest available ASP in your country:
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT
Greets

Mat****a DVD-RAM drive in Satellite A100 is not working correctly

When I insert any type of disc, the drive lights up, but the system cannot access anything on the disc. I have tried all the fixes that have been shown in the forums but nothing works. The message that I get is : D:/is not accessible. I/O device error. Curiously the only disc that it reads without any problem is the recovery disc. Unfortunately a system recovery did no solve the problem.

Hi there,
if you got still warranty then it would be necessary in your case to bring/send your machine to a local toshiba servicepartner for a hardwarecheckup. But even if you dont have warranty anymore you should do that because your issues sounds like a hardware failure.
If you need some help finding a service partner then I can provide you a link where you can find the nearest one:
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT
Good luck and nice weekend
Greets

Flash player does not work properly on Windows 7 32 bits

Hello,
My flash player does not work properly on Windows 7 32 bits with Firfox and IE8 (lasts versions).
My Flash player version : 10.0.45.2, but I tried with version 9 too, with same problems.
I have tried to uninstall, reboot, reinstall several times, ... witch did not worked.
In fact, it works correctly on some sites, like youtube, but not on some others like :
http://www.dailymotion.com/ => black screen instead of videos, right click gives flash context menu
http://www.canalplus.fr/ => videos does not load, right click gives flash context menu
http://www.myspace.com/ => no audio player, right click gives flash context menu
some games in http://www.kongregate.com/ => black screen instead of games, right click gives flash context menu
I have no problem with shockwave in http://www.adobe.com/shockwave/welcome/
No problem too with flash player on http://www.adobe.com/software/flash/about/
But in the Global Privacy Settings panel (http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager02.htm l), I cannot change any settings :
I cannot check boxes,
My changes are not saved.
In most of flash animations, videos, ...,
when I click on parameters, I cannot do anything, even closing.
when I am in full screen mode, the message "press escape to exit...." does not disappear.
Last thing, all those problems was not there when I was on Windows XP, few weeks ago, and appear with my registered Windows 7 premium familly edition, with the same hardware configuration...
Thank you for your help

Hi eidnolb
Thanks for your answer.
This is what I have :
Verify user permissions
I have an administrator account.
I tried (uninstall, install and run) with super-administrator account for same results
Install the most current version.
I am running the latest version (10.0.45.2)
Run the Clean Installer to Fix 3rd Party Flash Player Cleaners
I did not "clean" my computer.
Troubleshoot Pop-up blockers
I have no Pop-up or esle blocker software.
Ensure that Internet utilities do not block Flash Player
I tried (uninstall, install and run) without Avast.
I have windows 7 firewall. I do not know where I can allow ActiveX controls and Flash (SWF) content. I do not see anything relative to ActiveX an Flash in allowed program list.
Fix machine crashes when displaying Flash content
I have no freez or crash.
Using IE, Shockwave Flash Object is Enabled and vs 10.0.45.2
Using FF, I have SWF vs 10.0.45.2 and it is Enabled
I really do not understand !!
Thanks,
Ju'

Gadgets not working properly in windows 7

For some reason the gadgets in windows 7 are not working properly. I can open the gadget gallery and select a gadget, but it doesn't show the entire thing. For example i select the clock, and all it shows is a black square with the red ticking hand frozen. Another example is the CPU meter. All it shows when i click on it is a little white square where the meter should be. I can still close the gadgets by way of the close button on each gadget though (the calendar doesn't appear at all). UAC is turned on and i have rebooted the pc, same thing still happening. (It is Enterprise edition if that makes any difference). If anyone could help that would be great!

Have you come across the problem where some of the Gadgets that you added to the Sidebar/Desktop are not displayed correctly? For example, the clock gadget may be displayed as a black square containing only the "seconds" hand. Other gadgets may show up as
white rectangles with an information (i) icon and a plus sign. The settings button next to the gadget does not work, but the
x to close does. Here are some screenshots:
The above-mentioned behavior is caused due to the following reasons:
A subkey with foreign/ASCII character exists under the "Zones" registry key.
XML registration is missing in the system.
Use these steps to fix the problem:
Fix for Case 1
1. Click Start, type Regedit.exe and press {ENTER}
2. Navigate to the following branch:
HKEY_CURRENT_USER \ Software \ Microsoft \ Windows \ CurrentVersion \ Internet Settings \ Zones
3. Under the Zones key, delete the subkey shown with an ASCII character:
4. Exit the Registry Editor.
5. Logoff and login back to your user account.
Fix for Case 2
1. Open an
elevated Command Prompt window. To open an elevated (admin) Command Prompt, click Start, click All Programs, click Accessories,
right-click Command Prompt, and then click Run as administrator.
2. In the Command Prompt window, type the following command and press ENTER:
regsvr32 msxml3.dll
3. Similarly, run these commands:
regsvr32 scrrun.dll
regsvr32 jscript.dll
You should see the DllRegisterServer in <filename> succeeded message for each command executed.
4. Logoff and login back to your user account and see if the Gadgets display correctly.

CD/DVD drive on Satellite Pro M70 wont work properly

Following my up date to Vista Ultimate and SP1 my CD/DVD disk drive stopped working.
I was able to adjuest this using the "HKEY_LOCAL_MACHINE/SYSTEM/ETC/.." but now only DVD will operate correctly.
When I try to re-install my All-in One printer the installation only reaches step 1 and I then get the follwing message. 'the Installer cannot access the regristry key - HIKEY_LOCAL_MACHINE\SYSTEM\Current\ControlSEt\Enum .'
The drive sems to be permanently in DVD RW. Can anyone assist.

>Can anyone assist?
Maybe Microsoft. Many different and very strange issues occur after SP1 installation. For better overview check http://aps2.toshiba-tro.de/kb0/TSB84026M0000R01.htm

Toshiba DVD player is not working properly since Windows 7 upgrade

I recently upgraded to Windows 7 and can no longer get my Toshiba DVD player to work.
I have tried updating drivers, uninstalling and reinstalling. Also, I tried to download a Realtec driver meant for Vista from a suggestion on another thread and that was even worse. It is currently uninstalled, but when I install it, it either doesn't play at all or I get an error saying that it can't connect to the output device.
Has someone experienced a similar problem on Windows 7?

I have the same problem - I have upgraded my new Toshiba satellite L300-29V and the Toshiba DVD player wont work. The error message I get is "modules needed for this application are missing - if restarting does not work then re-install application" - I don't know how to reinstall - supposedly the application is on a partition on my hard drive but I dont know how to get at it. Any suggestions please?
Tim

I have noticed that when using Tigers Dosk utility to ERASE a flash drive I have a choice of FAT but not FAT32. It seems that flash drives formatted as FAT do not work properly when trying to copy files from a Windows machine. Why?

I have noticed that when using Tigers disk utility to format an external USB flash drive I only have the choice of FAT ( when formatting for use on a Windows machine ) and not FAT32. I have found that USB FLASH drives formatted as FAT do not always work on Windows machines. Why? How can I use Tiger to format for FAT32?

I think it depends on the size of the Flash Drive as to whether it uses FAT16 or FAT32.
Can you format it FAT32 on the PC?
Other options would be NTFS or Mac OS Extended...
NTFS-3G Stable Read/Write Driver...
http://www.ntfs-3g.org/
MacFUSE: Full Read-Write NTFS for Mac OS X, Among Others...
http://www.osnews.com/story/16930
MacDrive for the PCs... allows them to Read/Write HFS+...
http://www.mediafour.com/products/macdrive/

ATI driver not working properly on windows xp

hello sir,
i have a problem and hope you can fixed it for me. the problem is, when im installed windows xp on my laptop. only Intel hd driver working but the ATI driver is not working ( not detetcted when done install driver). im trying install driver manualy, but still not working. So i dont know if ATI driver only used for window 7 or both. im used
G470 model 20078
Intel (r) celeron(r) CPU B800 @ 1.5GHz
tq

Welcome to the forum!
Did you install the Windows XP Chipset Driver for your model prior to trying to install the Ati driver? The chipset driver must be one of the first drivers installed so that the operating system can correctly identify the rest of the installed hardware for their driver installation. Once the chipset driver is installed, reboot and then try installing the Windows XP version of the Ati driver.
Owner & Operator of the following:
● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.

Usb not working properly in windows 7 x64 (890FXA-GD70)

Hi,
I am currently having problems with my USB ports. A select few ports are not working. In the device manager, windows claims to have not started up related drivers. I tried fixing this by updating the drivers from the msi page. This caused all the usb ports to stop working. I am not sure what the problem is but however it does seem isolated to my windows 7 x64 install. My keyboard and mouse still work in bios, but not once windows 7 starts up. The keyboard and mouse also work when I use the system disk to restore back to a system checkpoint. I am at a loss as to what could be causing this or how to fix it when the drivers supported are failing me.
Any help would be appreciated. Thanks.
Chris

Quote from: Bas on 19-November-10, 22:57:34
Those few need extra drivers.
As they are USB3.0 ports: http://eu.msi.com/index.php?func=downloaddetail&type=driver&maincat_no=1&prod_no=2025
Yea as I stated earlier, after installing these drivers all the usb ports stopped working in the current windows 7 install.

10.7 not working properly in windows 7

Hi,
I have windows 7 32 Bit OS. I had downloaded 10.7 just now & installed it.
It opened first time. but later on every time i try to run itunes, it says "iTunes has stopped working".
A Problem caused the program to stop working correctly. Windows will close the program.

Have you come across the problem where some of the Gadgets that you added to the Sidebar/Desktop are not displayed correctly? For example, the clock gadget may be displayed as a black square containing only the "seconds" hand. Other gadgets may show up as
white rectangles with an information (i) icon and a plus sign. The settings button next to the gadget does not work, but the
x to close does. Here are some screenshots:
The above-mentioned behavior is caused due to the following reasons:
A subkey with foreign/ASCII character exists under the "Zones" registry key.
XML registration is missing in the system.
Use these steps to fix the problem:
Fix for Case 1
1. Click Start, type Regedit.exe and press {ENTER}
2. Navigate to the following branch:
HKEY_CURRENT_USER \ Software \ Microsoft \ Windows \ CurrentVersion \ Internet Settings \ Zones
3. Under the Zones key, delete the subkey shown with an ASCII character:
4. Exit the Registry Editor.
5. Logoff and login back to your user account.
Fix for Case 2
1. Open an
elevated Command Prompt window. To open an elevated (admin) Command Prompt, click Start, click All Programs, click Accessories,
right-click Command Prompt, and then click Run as administrator.
2. In the Command Prompt window, type the following command and press ENTER:
regsvr32 msxml3.dll
3. Similarly, run these commands:
regsvr32 scrrun.dll
regsvr32 jscript.dll
You should see the DllRegisterServer in <filename> succeeded message for each command executed.
4. Logoff and login back to your user account and see if the Gadgets display correctly.

Whatsapp not working properly in windows

Developers please try to fix the problem for whatsapp first because it the the most important application we find. The messages are delayed and does not show immediately, we cant sent videos and music on whatsapp. Many people refrain to buy Nokia windows phone just because of this problem. There are lots of problems in whatsapp too

Have you come across the problem where some of the Gadgets that you added to the Sidebar/Desktop are not displayed correctly? For example, the clock gadget may be displayed as a black square containing only the "seconds" hand. Other gadgets may show up as
white rectangles with an information (i) icon and a plus sign. The settings button next to the gadget does not work, but the
x to close does. Here are some screenshots:
The above-mentioned behavior is caused due to the following reasons:
A subkey with foreign/ASCII character exists under the "Zones" registry key.
XML registration is missing in the system.
Use these steps to fix the problem:
Fix for Case 1
1. Click Start, type Regedit.exe and press {ENTER}
2. Navigate to the following branch:
HKEY_CURRENT_USER \ Software \ Microsoft \ Windows \ CurrentVersion \ Internet Settings \ Zones
3. Under the Zones key, delete the subkey shown with an ASCII character:
4. Exit the Registry Editor.
5. Logoff and login back to your user account.
Fix for Case 2
1. Open an
elevated Command Prompt window. To open an elevated (admin) Command Prompt, click Start, click All Programs, click Accessories,
right-click Command Prompt, and then click Run as administrator.
2. In the Command Prompt window, type the following command and press ENTER:
regsvr32 msxml3.dll
3. Similarly, run these commands:
regsvr32 scrrun.dll
regsvr32 jscript.dll
You should see the DllRegisterServer in <filename> succeeded message for each command executed.
4. Logoff and login back to your user account and see if the Gadgets display correctly.

ITunes will not work properly on windows PC

iTunes performance is slow and my devices will not synch properly after uninstalling and reinstalling the application 3 times on my windows PC. When I tried to update my phone, it took hours and failed to backup anything on my phone from July to now (Dec) and will not recognize my iPad.

Follow the directions of tt2 in https://discussions.apple.com/thread/5822086

Push Mail Not Working Properly for Windows Live Mail when Online At Windows Live Messenger

Hello,
This is quite an old subject, but it seems to be a recurring problem across versions of Windows Live Messenger handheld client software and Blackberry Internet Service server software. For some time, I used to have no issues with Live Messenger and Push Mail from Hotmail. Now, once again, I am having a huge delay, of several hours, when logged on as “Online” to Windows Live Messenger.
What makes me believe that it is not a Windows Live limitation, by design, due to protocols and notification mechanisms in use, is the fact that I can receive both push mail and instant message notifications, immediately, as long as I am logged on to Windows Live Messenger as “Busy” or “Away”. If the protocols in place allowed notifications to only a single service at a time, I believe it should not work regardless of the status on Windows Live Messenger.
I have been using Hotmail for quite a while and most of my friends use Windows Live Messenger, so I would like to keep both working in my BlackBerry. I understand BlackBerry has a commitment to offering broad compatibility, great stability, and better integration than other solutions on the market that appeals to fancy user interfaces and forget about objectivity. Having a mobile platform that can keep both the corporate and consumer world happy is definitely a great advantage. There are several loyal users that would like to keep sharing the proficiency on a common user interface for business and personal use.
I do not often post messages to online forums, but this is an issue that has been annoying me for quite some time and I am really looking forward to a solution. Is anyone experiencing the same behavior with Windows Live Messenger lately? Is RIM looking for a solution?
Thanks,

Ahhh...given that description, it may be WAD (Working As Designed):
KB15747Email message delivery is delayed because of an integrated Windows Live Hotmail account on the BlackBerry smartphone
As such, there would be nothing to report...
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Satellite M100 sound not working after installing Windows 7

Everything else is working after this upgrade except the sound. Have tried everything. Any suggestions?
Many Thanks.
Rory

Hi,
For me the case is clear: Windows 7 is not the market as yet and its not released as yet. So I think this is the problem.
Anyway, have you tried to install the driver from the Toshiba website? There you can also find the Synaptics driver. Its for Vista but normally the drivers for Vista are also work in Windows 7. Its worth a try.
http://www.csd.toshiba.com
Have you tried the key combination FN+F9? So you can enable and disable the touchpad but I doubt that this works. Normally you need the Toshiba utility for this
Greets

DVD-Rom drive in Satellite C655-S5128 not working properly in Windows 8

Similar Messages

Maybe you are looking for