Dvd-rom drive

Help!
I loaded itunes onto my pc using the cd-rom in the box for the 30gb video ipod, but it disabled the dvd-rom / cd-rom drive.
Any ideas on how to fix?
Thanks

Hi
look @ newegg.com; you can get a DVD burner for under $40, so plain DVD-ROM should be more like $25-30.
Check owner reports @ xlr8yourmac.com's "Drive Compatability" page on specific vendors - pretty much anything name brand (Pioneer, LG, Panasonic, LiteOn) should boot an OS installer CD/DVD. Sony is very iffy on Mac support, so I personally would avoid their products..

Similar Messages

Mounting a Solaris x86 CD/DVD from a remote Windows CD/DVD-ROM drive

Greetings, all.
Is it possible to mount a remote Windows CD/DVD-ROM drive? I have the Solaris 10x86 Companion Software DVD sitting in a CD/DVD-ROM drive that's installed on a Windows server on my network. It is shared-out (F:) and the two servers can ping each other. I've also confirmed the NFS services/daemons are running on the Solaris x86 machine. I've tried the following variations but, all have failed to produce successful results:
# mount -F nfs x.x.x.x:/f /mnt
nfs mount: x.x.x.x: : RPC: Program not registered
nfs mount: retrying: /mnt
# mount -F hsfs x.x.x.x:/f /mnt
mount: No such device
mount: cannot mount x.x.x.x:/f
# mount -F hsfs x.x.x.x:/F /mnt
mount: No such device
mount: cannot mount x.x.x.x:/F
[FYI: S10_106_SOFTWARE is the DVD's label as reported by Windows Explorer.]
# mount -F hsfs x.x.x.x:/S10_106_SOFTWARE /mnt
mount: No such device
mount: cannot mount x.x.x.x:/S10_106_SOFTWARE
# mount -F hsfs x.x.x.x:/s10_106_software /mnt
mount: No such device
mount: cannot mount x.x.x.x:/s10_106_software
# mount -F nfs x.x.x.x:/S10_106_SOFTWARE /mnt
nfs mount: x.x.x.x: : RPC: Program not registered
nfs mount: retrying: /mnt
# mount -F nfs x.x.x.x:/s10_106_software /mnt
nfs mount: x.x.x.x: : RPC: Program not registered
nfs mount: retrying: /mnt
# mount -F hsfs x.x.x.x:/f/s10_106_software /mnt
mount: No such device
mount: cannot mount x.x.x.x:/f/s10_106_software
# mount -F hsfs x.x.x.x:/F/s10_106_software /mnt
mount: No such device
mount: cannot mount x.x.x.x:/F/s10_106_software
# mount -F hsfs x.x.x.x:/f/S10_106_SOFTWARE /mnt
mount: No such device
mount: cannot mount x.x.x.x:/f/S10_106_SOFTWARE
# mount -F hsfs x.x.x.x:/F/S10_106_SOFTWARE /mnt
mount: No such device
mount: cannot mount x.x.x.x:/F/S10_106_SOFTWARE
I've also tried mounting it at bootup by adding the appropriate entry in the /etc/vfstab file but, this does not work as well. I've tried Google'ing for an answer to my issue but, I haven't been able to find anything that applies directly to what I'm reporting. It's usually chatter about mounting from one UNIX server to another. Any advice from the community would be greatly appreciated.

After three weeks, you deserve a reply. Windoze does
not natively support NFS.Also deserves a decent answer...
There are two ways to do this:
Install Microsoft's free "Windows Services for UNIX," which includes a Windows NFS server; or
Install the 'sharity' package (google for it); it provides Solaris systems the ability to mount Windows shares

PowerMac G5 doesn't work anymore simply due to a DVD-ROM drive removal!

Hello, here's what's happened (I'll write using the "present" because I'm not English).
This happened about two days ago:
I need to read an Ultra ATA hard disk, so I power off the Mac.
I remove the SuperDrive DVD-ROM and I connect the hard disk in its place (I already made this with other ATA hard disks in past and it always was OK).
I close the Mac.
I try to start: nothing! The light on the power-on button of the Screen (Apple Cinema Display 20" plastic) and the light on the power-on button of the Mac case starts flashing 3 times (then stop, than other three times, etc...).
So I power off. I change the jumper configuration of the hard disk, like the Super Drive. I try again: NOTHING. Always three-times flashing the lights.
So I power off. I re-install the DVD drive, close the Mac again and restart it.
SURPRISE: the same symptom! The computer doesn't start and always makes the three-times flashing lights...
So I tried totally removing the DVD drive, and restarting it without it: nothing: same symptom.
Unfortunately I made these attempts forgetting to disconnect the power cable of the Mac!
Then I start trying with other RAM configurations, hoping that just a RAM module got burned. I have 6 ram modules (512 MB each).
I try lots of combinations... nothing, always same symptom.
Finally, I disconnect the power cord again, I re-install all the RAM modules, an I try to reset the CMOS: I remove the Motherboard battery for some seconds.
Than I re-install the battery, close the Mac, connect the power cord, restart it: it works!!!
I go in System Info, and I see that it doesn't recognize two of the 6 RAM modules: just 4. The slots of the other 2 not recognized DIMM modules seems empty, but there is the ram!
So I power off the Mac Again. I disconnect the power cord.
I change the RAM modules positions. I try again: nothing! Again the three-times flashing lights symptom, and always black screen again.
So I try again by removing the CMOS battery... nothing... always flashing...
After lots of attempts (also changing again the RAM positions, trying to remember how it was when it worked...)... nothing.
I power off the Mac.
After about an hour, I simply try to power on it... IT WORKED!!!
I used it too... went on Internet, etc... Finished working, I powered it off and went to bed.
The day after, I tried to power it on... nothing! Always three times flashing lights...
From that moment, it was totally impossible to let it work...
I tried to change the RAM positions again... I tried also pressing every time the reset button on the Mother Board... nothing...
The only different symptom that I obtained, a couple of times, was that the two lights (on the Screen button and on the Mac tower button) didn't flash, but was always on.... but it didn't run anyway: totally black screen.
How is this possible? Durin 18 years of computer hardware experience, NEVER happened that a computer got broken just removing and re-installing a DVD-ROM drive!
And I'd never imagined that removing a DVD-ROM could be a dangerous operation... It seems to me just like a car that got broken if I replace the cigarette lighter...
What do you think? how is this possible?
If the CPU or the Motherboard or the RAM too got broken... simply it NEVER should run... on the contrary two times it worked very well!... with a broken Motherboard or CPU??? ...mmmm... so strange....
If the RAM got broken... how is this possible? 6 ram modules burned together??? It seems so absurd... (in past there were 8 RAM modules... one or two got broken... so I removed them and it worked again... but not 6 !!!!).
Any opinion?
Any practical advice?
Prevision of costs?
Thank you!!!
Message was edited by: ununpentium

Hi Wolfman I have an update of the situation.
We tried moving the RAM modules again... and at one point it worked! With just 2 RAM modules.
But at the green screen (with the gray apple darker) it blocked.
So we removed the two RAM modules and installed other two modules: it worked again! These two last modules are 512 MB each.
So we restarted the system pressing "c" with the OSX DVD in the drive, and it worked! I used System diagnostic OSX utility and it found the 2 ram modules, but of 256 MB each instead of 512 !!! How is this possible? (if they were broken OK, but detect just half of its size seems so strange...).
Than we restarted it again connecting an OSX bootable external Fire Wire LaCie hard disk (FW400 port), and it worked!
We used DISK UTILITY to test the internal boot hard disk and it gave me an error (verify disk).
The Disk utility was unable to repair the disk.
Another damage!
I remember that in the past attempts it booted once (not three times flashing) and stopped at the grey screen... (I think: maybe due to the boot hard disk error!).
Unfortunately this external bootable firewire disk has got some problem and it sometimes blocks itself emitting a "clic".
So I powered the mac off and connected another newer firewire lacie bootable hard disk. I connected it in the FW800 port. I rebooted and... surprise: three times flashing light again!!!
No way to let it pass this wall, no initial "sound" again... nothing!
So I removed the FW800 drive, and changed the RAM again (inverted them, always two internal slots n. 1 and 2): it worked!
I booted from the FW400 hard disk, and it worked. I was able to backup some data from the internal hard disk (in order to be able to try to solve the error initializing it), and I tried again to boot with the FW800 hard disk (I want a stable system while initializing a drive!).
As I connected the FW800 hard disk again, I tried to reboot... nothing! Again the three-times flashing light error! No sound... black screen again...
(So, simply removing a DVD ROM I got RAM broken, maybe the Logic board, the hard disk too... maybe the FireWire 800 port too.... mmmm.... this mac is possessed! And it is connected through a professional power stabilizer too!).
So after several attempts with RAM, cmos reset, firmware reset (power it up holding the power on button for some seconds), etc... I got it working again...
So this time I rebooted it pressing "c" and I initialized the internal hard disk using the OSX DVD as boot drive...
Then I rebooted from the FW400 hard disk and I used CarbonCopyCloner to restore an internal hard disk clone OSX complete installation from a .dmg image file in the FW800 lacie hard disk... but this time I connected it not using the FW800 port but through the USB 2.0 port... and it was able to copy the data.
The computer was working... able to boot... no three times flashing error... no FW800 connections... always rebooting OK... the internal hard disk initialized, working, with NO errors (disk utility tested), made bootable...
I tried to reboot again (with no "c" or "alt" pressing, hoping the internal boot hard disk working again): nothing!
THREE TIMES FLASHING LIGHT AGAIN!!! No way to solve the problem now... always flashing...
What is happening here??? I don't understand! I use computers (instable DOS/Windows computers mainly!!!) form about 18 years... never seen a so strange behaviour!!!
We'll try to gather money to replace the RAM, before thinking to a Logic Board replacement...
Your opinion?
Thanks!

My acer 7535-5020 no longer recognizes my cd/dvd rom drive

My acer 7535-5020 no longer recognizes my cd/dvd rom drive-I am ready to scream! I cannot afford the tech prices as I am disabled but I cannot find anything to cure this sick puppy. Help please!!!

check inside BIOS whether your ODD can be detected, if cant be detected must be connection cable or HW issue
if still able to detect in BIOS, try to run basic troubleshoot regarding ODD
https://support.microsoft.com/en-us/kb/314060/en-us?wa=wsignin1.0

DVD-Rom drive in Satellite C655-S5128 not working properly in Windows 8

I recently upgraded my system from Windows 7 to Windows 8. However, the DVD-Rom drive after the upgrade no longer works properly -- it now treats the pre-recorded disk as if it was completely blank. I tried reinstalling the Toshiba Disc Creator, but that did not work.
Any solution?

You apparently did not use the Toshiba Upgrade Assistant in upgrading to Windows 8. See HERE for DVD and Disk Creator problems occurring during the upgrade and solutions.
C.B.
Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit

Can anyone point me in the right direction for the link to download Acrobat 9 Standard? I found the link to download 9 Pro but not standard. Old computer crashed and new computer does not have a CDR/DVD rom drive.

Can anyone point me in the right direction for the link to download Acrobat 9 Standard. I found the link to download 9 Pro but not standard. Old computer crashed and new computer does not have a CDR/DVD rom drive.

Hi,
Standard or Pro would be licensed through your serial number, the download link and downloaded file would be the same for both of them.
Pro or Standard would be determined after you put in your serial number.
Download Acrobat products | 9, 8
Thank You
Arjun

CD-RW/DVD-ROM drive reads DVD's but spits out CD's

Hi,
The CD-RW/DVD-ROM drive of my Titanium Pawoerbook doesn't read CD's anymore; it makes funny noises and spits any CD's out again. Funny thing is that I don't have any problems reading DVD's.
Is there anything I could do to fix this problem?
Thanks for any advice!
Malte

Try using a DVD drive cleaning disc first. Available in most PC shops.My Ti's Superdrive goes through phases of having a bad day making ugly cluncking noises and spitting discs out but the next day works just fine...
mrtotes

CDRW/DVD Rom drive disabled by Panther

Looks like same problem as dozens of others, but no answers. After upgrading to 10.3.9 the Sony CRX820E is hiding. Toast titanium says "no CD Recorder found" CD's show up in finder but not DVD's. (it is a DVD Rom drive)
Anyone find a fix for this recurring problem or do we just write it off to "progress"?

The entire computer is 6 years old almost 7, and it worked fine until recently.
Maybe its to do with the new power supply I put in, I put a 750 watt power supply in to replace my 250 watt, because I recently got a new graphics card.
the power supply is plugged in correctly, and my system tells me the drive is there, it just won't read DVD discs.
I'll give a run down of how putting the new power supply in went:
1) I found out that the plug I would need for my floppy drive was required by my new graphics card, so I took the IDE cable out of the Floppy drive and motherboard, and plugged the power supplies plug into the graphics card.
2) After a problem with my computer not being able to find either the DVD Writer or CD drives, I found the problem was a loose IDE cable, which I promptly put back in place, then my computer was able to find the drives.
3) Afterwards I changed my BIOS a little, I changed it so it wouldn't try to find a Floppy drive, and changed the sequence of booting the system from having the floppy drive boot first to the DVD/CD drives boot first.
4) I started up my system and popped in a disc for a game, 3 different times the drive refused to work, 3 different times I found a solution that got it to read the disc, then afterwards if I put a different disc in it wouldn't work, and the fix wouldn't work a second time.
I hope this helps answer me, but here is another question. Can a device be plugged in to any IDE port on the motherboard? If so, is it possible using the IDE cable to plug the DVD drive into the port the Floppy drive was plugged into might help?

Driver for DVD rom drive for dv6308nr

Does anyone know where to find the driver for an HP laptop dv6308nr cd/dvd rom drive? I looked it up on the site and it isn't listed under the available drivers. Maybe I am missing it????

Hi,
which Notebook do you own and which system is used?
Normally you don't need an extra DVD driver except DVD RAM is used!
Is there occured any failure with the DVD? Why can't you use it anymore?
Please write down some further informations!
Bye TOK

DVD+R not reading back on some DVD-ROM drives

The recording device is the built-in SuperDrive on my iBook G4 1.42. I've been archiving copies of my photos to recordable DVD. It's usually 2 copies of each set - one in DVD+R and one in DVD-R. I store each set in a different place.
My preferred media is (Made in Japan) Taiyo-Yuden media sold under the FujiFilm and Sony label. So far, the spindles I've opened and used are the FujiFilm (8x-listed) DVD+R (regular silver label) and DVD-R (from the "Color Tower" package).
The DVD-R recordings seem to read back fine in most DVD-ROM drives I've tried. I have a circa 2001 PC with a DVD-ROM drive, and it doesn't read back the DVD+R copies. It'll just whirr for about 20 seconds and then just stop without the disc mounting. All DVD recordings seem to read back just fine on my iBook G3 600.
Are there any known problems with readback of DVD+R recorded from OS X on some DVD-ROM drives? I figure I'm eventually going to get an external drive that also records DVD+R (I'm thinking that would present the fewest compatibility problems) or a new machine (it's about time after five years).
14 iBook G4 1.42 1.5GB (10.4.3), 12 iBook G3 600 640MB (10.3.9)

Just a note of interest. If your machine is 2001
vintage, my guess it doesn't like + media at all.
There are some reports that in some cases that these
older drives can read them sporaticlly at best, this
is normally caused by the poor quality of some
manufactures.
It's a Sony VAIO desktop with a Pioneer DVD-ROM drive. I don't know about "quality" per se, but it probably finicky.
I find that using the best quality media eliminates
many problems. And I realise that it is more
expensive to use this media but in the long run it's
worth the extra money.
Have a look at the Media Guide below.
http://www.digitalfaq.com/media/dvdmedia.htm
Cheers Don
Like I said - Taiyo Yuden all the way unless it's maybe sometime like video storage where it's no big deal. I just got three spindles of MIJ (had to look carefully for that) Sony 16x DVD-R for $12.99 each at CompUSA. They didn't have it on sale, but they price-matched the $12.99 price at Best Buy (my local store only had made in Taiwan stock). I was next to the manager at the customer service area, and she said I could have as many as I wanted at that price. If it were some expensive item, I think I would have been limited to one or two.

Using the DVD-Rom drive renders MBP almost useless

Under Windows XP Pro on my 2.2 MBP, while accessing the DVD-Rom drive for anything (browsing directories, installing something, playing/burning a DVD or ripping a CD) the computer cannot playback audio. It comes out so skippy and jumpy that you cannot recognise speech. It slows down typing input, mouse movement, and makes video playback skippy. It also hangs up my soundcard (M-Audio Firewire 410), and I have to restart the computer to get sound to work again. I have installed the Bootcamp 2.0 drivers from the Leopard disc.
Does anyone else have this problem, and have you found any way to fix it? Thank you.

Anyone?

Playing DVD+RW discs in DVD-Rom drive

I've got a Toshiba SD-M1222 DVD-rom drive. I recently bought a new separate domestic DVD+RW machine.
Discs recorded on the DVD+RW play back no problem in my other domestic DVD players, but when I try to play them in my DVD-Rom on the PC, I get a 'disc not recognised' message, even though I have set the recording up to be compatible with other players.
Is there a way I can get DVD+RW discs to play on this DVD-Rom drive?

Hi
Sorry but there is no way to change it. Those are two different formats. I have the same situation with my Satellite.
If you want to have more information about DVD formats google a little bit around.
Bye

Installing Photoshop Elements 12 w/out dvd-rom drive

I bought the adobe premium elements 12 and was told that I could download it online. I need help downloading it without the DVD-ROM Drive.

download the trial and activate with your serial number:
http://www.adobe.com/products/premiere.html

My last windows update whiped out my cd/dvd rom drive. how can i get it back?

on my HP Pavilion dv6700 entertainment notebook.
originaly was equipt with Window Vista Home, but I upgraded to Windows 7 Home both are 32bit.
I have automatic updates enabled, but I think my last update whipped out my CD/DVD ROM drive.
it shows up in my BIOS, but not in my device manager. I updated the driver(s), but still doesn`t show up, and my computer cannot find it. I get an error saying the drive doesn`t exist.
Is there a way to fix this? is is my drive ultimately dead?
plz help
[removed for privacy]
thanks,
Liz

Hi,
This fix from Microsoft may help.
Regards
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Satellite L300-1D4 PSLB8E - Cannot Open CD/DVD ROM Drive

Hi, Fellow's
So i have a problem with cd/dvd rom drive.
After i upgraded with latest driversmy computer the drive cannot opening :( i'm doing restarts and this is the same... when i press drive button to open, it flashes orange led for two or three times and nothing happening, the drive is still busy.
Before windows reinstalation with older version drivers worked fine, but only sometimes it wasn't working.. and now it doing nothing all the time.
My windows is 7 x64, drivers updated yesterday. Can anyone help me ?

> Before windows reinstalation with older version drivers worked fine, but only sometimes it wasn't working.. and now it doing nothing all the time.
It looks like a driver update lead to malfunction. so, reinstall OS or restore OS to earlier point. By the way, is it listed in device manager?

Dvd Rom Drive in a Satellite 4030 cds???

I have an old Toshiba Satellite 4030 cds.I would like to know if i am able to install a dvd rom drive into this laptop. If yes which models would fit this machine.
Thank You
PB

Hi Breck,
in my opinion there is no way to upgrade the internal CD Drive to a DVD Drive because the CD Drive is fixed mounted and could only replaced by the same model!
Only an external solution like USB or PCMCIA would fit!
Sorry!
Rudi

Dvd-rom drive

Similar Messages

Maybe you are looking for