DVD-rom into G3 with no firewire?

Hello all ~ I'm sure this question's been asked an answered, but I can't seem to find out by searching. In any case, I am thinking of purchasing an add'l clamshell G3 and was wondering if it's possible to put in a DVD-rom drive into these. I've read mixed things, so someone please help! Thank you.
MaxGirl

00MaximaGirl, Welcome to the discussion area!
You might want to search the xlr8yourmac.com's user compatibility database to read about the experiences of others.

Similar Messages

Disappear pavilion dv4 DVD ROM into My Computer

HI Experts
I have Pavilion Dv4 Laptop HP, Recently my DVD Rom drive disappear into My Computer TAB.
how to recover the same.
RGds
Pankaj Agarwal

Hi,
Please try "Fix It" from the following link:
http://support.microsoft.com/kb/314060
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

DVD-ROM not recognised with M/S setting

Hello, I just purchased a SD-R2412 DVD-ROM drive to replace my defunct drive (same model). However, my old drive was CSEL type and this new one is M/S. I didn't know there was differences within same models. This new drive is not recognized by Windows XP (SP2) and the second IDE controller disappear. Also, it is not possible to boot from CD, so I guess the BIOS is not recognizing the drive either.
I've seen some discussion regarding the reverse (old M/S, new CSEL) and some solutions for that case, but I haven't seen any comments on my problem.
My guess is that the drive is configured as slave and the BIOS is unable to recognize it in this position. If so, the question would be if there's a way to configure the M/S drive to act as a master.
Any ideas?
Thanks.

Hello
It will be very interesting to know, which Toshiba unit you have. As far as I know the drive is already set to slave but I dont now about exactly position of the jumper. Nevertheless take a look on the label which is on the drive. There you can find a picture how to set the little jumper to master or slave.
Best regards

Importing DVD Movies into iMovie with anything OTHER than a camcorder

I tried to look around the discussion board for my questions but 643 pages is a lot. This question has probably been asked 8,000,000 times but I will be 8,000,001.
I recorded some video footage on to a DVD-R disc. I tried to insert this disc into my Mac Mini and I cannot import the video footage into iMovie. I called Apple Support and they told me that once its in a format where other DVD devices can read it, I cannot import it into any Apple Software.
My question is, how can I use my DVD footage in iMovie? Is there additional software that I need to buy? (SUCH AS:)
* DVDxDV (free trial, 25$, Pro: 90$)
* Apple mpeg2 plugin (20$) + Streamclip (free)
* Cinematize >60$
* Mpeg2Works >25$ + Apple plug-in
* Toast6/7 allows converting to dv/insert dvd, hit apple-k
* connect a miniDV Camcorder with analogue input to a DVD-player and transfer disk to tape/use as converter
I have no idea what these programs do and I would appreciate it if someone can direct me to the correct one if one of these can help.
Can I convert this footage into some sort of file (Quicktime or something) that will be accepted in iMovie?
If this question was asked already (which i am sure it has) please direct me to the link where I can get my questions answered. Thanks.

Hello CreoleGQ,
the software Karsten's post points you to is meant to convert MPEG-2 (DVD) video to DV format (iMovie compatible).
I recommend you start reading here:
Dan Slagle's Unofficial iMovie FAQ: Using Mpeg (DVD) footage
http://danslagle.com/mac/iMovie/tips_tricks/6010.shtml
Matti Haveri's website: How can I edit MPEG or convert DVD or MPEG to DV
http://www.sjoki.uta.fi/%7Eshmhav/SVCDon_a_Macintosh.html#edit_convertMPEG
More info on the various software can be found on their respective websites
hope this helps
mish

DVD ROM not working with Windows 8.1...I need the driver please.

My CD/DVD/BluRay Drive is not working since I upgraded my laptop to Windows 8.1. I really need the driver as soon as possible. I really need the DVD/CD Drive to work. I spent so much money getting this laptop to where it needs to be. I bought new hard drives and everything. Please tell me that you are going to provide a driver for Windows 8.1.

Hi @biokimyaci
Welcome to the HP Support Forums! I see that you are looking for a driver for your CD/DVD or optical drive. There are no specific drivers for the optical drive they are generic Windows drivers that come as part of the operating system. Go to your Device Manager and under DVD/CD-Rom drives right click what you have there and select Uninstall. They restart your computer and Windows will automatically install the driver. What is the product number for your notebook?
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Importing DVD's into Itunes with Windows

Hi I was wondering if anyone knows how to import DVDs into Itunes so that there is a way for Canadians to have movies on their ipods. I was also wondering does anyone know when Canada will get Tv Shows and Movies in the Itunes Store?
Thanks.

Hi,
You might want to post this question in the Windows Forum rather than the Mac Forum. If you had a Mac I would suggest Handbrake (http://handbrake.m0k.org/) = they are working on a Windows version.
As to getting TV and Movies you're in the same boat as those of us in the UK
Regards,
COlin R.

DVD-ROM problem reloaded

HI everybody. I have posted this issue before, but got no solution for it. So, I'm trying again.
Whenever I insert a CD into my DVD-ROM drive the system gets locked. The drive's light lights up a few times, but everything gets locked, including the mouse pointer. Then after a few minutes the mouse pointer is released and the system can be used again. The DVD-ROM drive, however, is never accessed at all.
When the above useless processing is finished the mouse pointer is released, and I can use the system - as long as I don't try to access the DVD-ROM drive again. If I do try to access the drive, everything gets locked up again as explained in the above paragraph.
Would you guys be able to help me figure this out?

ttreaders:
I have had problems since I began installing nVidia IDE drivers. Whenever I install those, the problem repeats itself. With the original MS WinXP drivers I did not have it. However I get a lot more performance from the system with the newest nVidia IDE drivers. So ...
G_man:
Thanks for your "moral" support. Your description of the problem is excellent. It seems exactly the same as mine. This drive is a Samsung SD-616B 16x DVD-ROM that came with my Dell 8200 system. I took it out of the Dell system and installed in the new one. The FW version is F006. I bought this Dell 8200 in November 2001. I wouldn't think it's an old drive though. Regarding round cables, I do have them, so I might try using flat ones sometime in the near future, and see if it works better. Also, please see my reply to archermoo below.
Archermoo:
I have disabled UDMA mode in Bios and driver, and ... IT WORKS!!! Alleluiah. The system can access the drive and is not hanging any more. .
Now, my question to you guys is: what am I missing by changing the DVD-ROM drive's access mode to PIO?

Some Advice Concerning my MSI 16x DVD Rom Needed

This probably isn't the forum to ask this but I'm running out of options. I'm using DVD X Plat and it absolutly refuses to use the MSI DVD Rom to read with. I'm having to use the writer as the reader resulting in read times of 15-18 min. By the way I have had excellent performance in burning DVD-R's and CD-R's, TDK's, Memorex and Generics. I have tried everything but consider myself a hobbiest at most. I have the reader on IDE 1, the Burner on 2 and the HDD on 3. I thought I would get the best performance with the reader on 1 and burner on 2. The reader plays DVD's, CD's fine but absolutly will not read while backing-up DVD's. Anyone familiar or experience any problems like this. Could it possibly be the reader? Any help would be appreciated, thanks.
Butch R

NovJoe, Thanks for the reply. The Seagate HDD is IDE. You gave me some advice on the settings in BIOS. Would they still be same considering my HDD is IDE? Also I was informed that having the burner and rom on 2 seperate channels would be better. While speed would not increase perhaps quality would. Any comments? I just burnt a DVD to DVD using Nero and the results were great with the Rom and Burner. No one else has experienced the problem I'm having with the program that has responded to my query on their forum. Pulling my hair out
Thanks
Butch R

Receive message after importing serveral songs from CD into iTunes (latest ver 11.1.5.5)... "Error occurred while converting the file 'songname'. The required folder cannot be found." CD/DVD ROM is no longer recognized until restart.

Consistently receive the following message after importing serveral songs from CD into iTunes (latest ver 11.1.5.5)...
"Error occurred while converting the file 'songname'. The required folder cannot be found."
CD/DVD ROM is no longer recognized until computer is restarted.

I have the same problem. I recently moved my music from a Vista PC to a new Laptop with an external CD drive. It will copy one song from the CD and it will show in the Music file and then I get the message ' Error importing a CD - Folder not found'. I must unplug the CD drive and plug it back in. I have seen no fix for this problem.

Can you install tiger on a power mac g4 with out a DVD drive if so how, I do have have a 2011 iMac can I use that in target disk mode with a FireWire cable any help would be appreciated

Can you install tiger on a power mac g4 with out a DVD drive if so how, I do have have a 2011 iMac can I use that in target disk mode with a FireWire cable any help would be appreciated

Hello,
You need to put the Tiger Install Disc in the 2011 iMac, boot the 2011 uMac into Target mode...
http://support.apple.com/kb/HT1661
Boot the G4 holding the Option or alt key, hopefully the Install Disc in the 2011 iMac will show as a boot choice.
We just want to use the 2011 iMac as a big expensive FW Optical drive, it cannot be installed osing the 2011 iMac itself.

Can I swap the CD-RW with a DVD-ROM from older iMac?

I have two slot loading iMacs.
1)iMac DV spec ed. 400 MHz with DVD-ROM from Oct. 1999
2)iMac spec. ed. 700 MHz with CD-RW from summer 2001
Can I put the DVD-ROM from iMac 1 into iMac 2, i.e. take out the CD-RW from the newer iMac and put in the DVD-ROM from the older iMac ? Or is the DVD-drive too old ?
Thanx
Martin

I don't see any reason this wouldn't work, but I'd have to wonder why you'd want to do this. a CD-RW is much more useful, in my personal opinion, than a DVD player on a computer.

Idvd project with video and slideshow for dvd-rom file access

working on an idvd project with both a video section and photos in a few photo galleries. its' a slightly more complex project, but still only 2gb on a 4gb disc. After we burn (with all dvd-rom contents checked, and advance>edit dvd-rom contents shows photo files all there) the finished disc doesn't have files available in the dvd-romcontents! its' driving us mad as simpler projects are burning properly, with both photo and video files available. Could there be some kind of conflict occurring? does anyone have any ideas?!
17" Desktop G5 Mac OS X (10.4.2)

Steve,
It sounds like Windows Movie Maker Live was used. The regular WMM will Export to DV-AVI Type I, which will Import into PrPro much better.
I would recommend converting the WMA/WMV to DV-AVI, and Importing that into a DV NTSC (if you are in NTSC-land) Project.
Then, you would use Encore to do the DVD authoring. There are several ways to get the material on your Sequence into Encore. ADL (Adobe Dynamic Link) is probably the easiest way to do this.
What is your exact workflow from PrPro, into Encore?
What brand of blank media are you burning the DVD to?
This ARTICLE will give you some tips.
Good luck, and let us know a bit more,
Hunt
PS - Multiplexing is the function of combining the Audio and the Video into one file. There are usually two choices, "None" and then often "DVD." For None, you will get two separate files - one for the Audio and one for the Video. With "DVD" you should get a muxed (combined) file. Actually, the separate Audio and Video is the preferred way, if one is doing an Export from PrPro, and then an Import to Encore. One would Import the Video into Encore as a Timeline, and the Audio as an Asset. In Encore, just drag the Audio file from the Project Panel to the appropriate Timeline, where it will snap into place.

Help to Install Tiger OS with external USB DVD-ROM

Hi! I would like to know if I can install Tiger with a External DVD on my G3 Ibook?. My internal CD crash, that's why I looking for an advice..
Regards.
Dave

I have a similar problem, but unfortunately, the FireWire port got thoroughly bashed before I got my hands on this machine. So while this model can, strictly speaking, run Tiger (or could if I upgraded the memory), I can't use Target Mode to do so, nor can I boot from the DVD, because this model, which was the first iBook to come with a FireWire port, only has a CD-ROM, not a DVD.
I understand that Apple used to give people the option to send in their Tiger DVD and get a set of CDs, but I can't find any trace of that on the Apple site now. I've seen Tiger on CD for sale, but it cost $179, even before shipping, and the whole point of the exercise is to avoid spending any more money than absolutely necessary (at least during this fiscal year) to upgrade to Tiger. (I've had a whole bunch o' startup costs, and don't need any more right now.)
Grga

Authoring problem with DVD-ROM content, Authoring problem with DVD-ROM content

Out of nowhere, I can't seem to add DVD-ROM content to my latest DVD. The folder is about 1100 photos and weighs in at 1.6GB. The content is accepted, the DVD burns and all seems right until you try to access the DVD folders. The video plays beautifully. The folder structure displays but I can't even get the VIDEO_TS folder to display detail consistently. This isn't my first time to the fair, I've been authoring with DVDSP for 8-9 years.
I went back and reviewed the the procedure step-by-step, I even re-named all the photos to comply with ISO 9660 naming conventions... no joy. I've
burned it with and without the Joliet Extension Support, no difference.
I'm on an (early 2008) 8x3.2GHz Mac Pro running Snow Leopard (10.6.8) and FCS3.
Anyone ever seen this? I'm stumped.

Michael, thanks for the response. It turns out it's both the size and quantity of photos.
I feel stupid for not solving this earlier, but it took a trip to one of my back-up systems to see the problem:
The SuperDrive simply doesn't have the bandwidth to quickly transfer sufficient info to display these additional folders. I tried the same DVD on one of my souped up G5 dualies (with new 16X burner) and it seemed to incrementally display the folders. That's when I realized that a DVD with a couple of GB of video on it is a poor display system. LOL
I'll re-organize the data into more, smaller folders and instruct the recipients to be patient or drag the folders to their desktop.

Adding H.264 Files into DVD-ROM Folder

So here is the problem:
I have 10 hours of footage and I want it all on one DL-DVD that will only be used in Dell/IBM laptops with QT installed.
Here is where I am at:
I converted footage into 10 one hour H.264 files, and I plan to use DVDSP4 to create a DVD-ROM folder.
Here is the question:
Is there any way to create a menu that will allow me to create chapter markers to open each file when clicked? I read about DVD@ccess, but this does not seem the way to go for PC users. And if there is no way to do it, should I just use Toast and make a data DVD? (not sure if DVDSP4 will do this). Seems silly to make a Menu to Just tell everyone to go back to the DVD drive and look in the folder for the chapter files.
Thanks for any insight,
Don

But i guess that's not exactly a topic for this forum. < </div>
It's not the topic is inappropriate, it's just not a direct function of DVDSP and, as you might guess, folks like me have neither experience nor patience with PC applications. That it can be done at all without using something like HTML amazes me. Thanks for the heads up on this technique, Chris, hopefully the OP will research it on his own.
bogiesan

DVD-rom into G3 with no firewire?

Similar Messages

Maybe you are looking for