DVD RW AD 7581S doesn't operate

I have a notebook pro 4510 with a DVD RW AD 7581.  It doesn't recognize any types of disk (Music, DVD, blank) and doesnt spin. tried desintal it in system and so on but also tried take away and reinstall driver. Still nothing. What can i do?

Hello Peter2003,
Your Probook is a Business model.  Your issue would be best answered on the HP Enterprise Business Community Forums
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Similar Messages

  • I have purchased the Adobe Creative Suite 4 and now my first dvd of the software doesn't work anymor

    I have purchased the Adobe Creative Suite 4 and now my first dvd of the software doesn't work anymore. My computer doesn't want to read it anymore. I want to mention that I also tried on some other computers and still the problems continues. How can I solve this? On the Adobe webpage I can't find anymore the download for Adobe CS4. Thanks. Marius Lupu

    You can download the software from http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html and can serialize it with the serial number you have.
    NOTE:- READ THE INSTRUCTION PROPERLY TO AVOID ANY ERROR.

  • Ipod Shuffle 2nd gen doesn't operate and computer does not respond.

    Hi,
    I'm having troubles with my 2nd gen iPod shuffle.
    I was listening to music at night but accidently left it on during night.
    Next day no light flashed when i turned my iPod on, so I put my iPod on the dock, hoping it would turn on again.
    I've had my iPod in the dock for a full day now but it still doesn't operate when I try to listen to music. Also, the computer doesn't recognize it. I've tried using another iPod, which worked, and also tried using another dock, with no result.
    Can anyone help me?
    I hope my English is understandable.
    Thanks.

    I just had that same problem. I also have my iPod touch but i also want to use this for many other reasons... SOMEBODY HELP!!!

  • Firefox4 cleared compnents.classes(cid) error, but Start page still does not load? just shows search bar that doesn't operate /load?

    Loaded Firefox 4, received error message components.classes(cid), now corrected through help pages. But Firefox Start Page only shows a Search bar, that doesn't operate, page does not carry any other information, presume it's not downloading correctly, any ideas??

    This issue can be caused by an extension that isn't working properly.
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
    * Help > Restart with Add-ons Disabled
    * Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)
    See:
    * [[Troubleshooting extensions and themes]]

  • Cmd-N to create new window doesn't operate on frontmost app!?

    Hi there
    It's second nature for me to cmd-tab to another app, then hit cmd-N to open a new window in the frontmost app.
    I notice however in 10.6 that cmd-N doesn't operate on the frontmost application, but rather on the app of a window that my mouse cursor is on.
    So if Terminal is the active application with a window open, then I cmd-tab to Safari so that it is frontmost, but my mouse cursor is still over the Terminal window, cmd-N opens a new Terminal window.
    Is this the expected behaviour? It feels very wrong.

    I just noticed that this is only happening with Terminal - so another app is frontmost but the mouse cursor is over a Terminal window, cmd-N operates on Terminal, NOT the frontmost app.

  • Hp dvd 1040i Disk tray doesn't open half the time

    My disk tray is awful to try to open. I press the button, activity light, lights, but the tray doesn't open. Press and hold the button and the same thing happens. I have to go into Windows Explorer (XP sp3) and right click the drive and select "eject" to get the disk tray open. About 10% of the time the button described above does work, 90% not.
    I noticed in my device manager the drive is described as "HP DVD WRITER 1040d". Did I get the wrong driver with this drive?  I cannot find any DVD support on the HP site.

    I wanted to add that the "pin method" of opening the drive is also requires multiple tries and seems no more successful overall than just pushing the button repeatedly.  I actually have the best luck getting them to open by applying leverage with the tip of a knife as I push the button. 

  • I recently updated to Leopard, and now DVD Studio Pro 3 doesn't work.

    Hey,
    So I have a 1.8 GHz PowerPC G5 iMac (old skool, yes I know) and I reciently updated from my OS 10.3 to Leopard 10.5.6 (mostly because the internet would no longer work and I had to update or I couldn't get the latest browsers.)
    However, I just reciently discovered that while my FCP HD 4.5 has been working like it used to, my DVD SP 3 no longer works. This has been a horrible surprise for me, especially since I need to burn a DVD for a project I'm working on.  I've been searching all over the internet and these forums for the solution, but nothing has helped.
    Here is the problem:  When I open DVD SP 3 and try to save anything, the program crashes and disappears.
    Apparently I've been getting an "Exception Type:  EXC_BAD_ACCESS (SIGBUS) Exception Codes: KERN_PROTECTION_FAILURE at 0x000000000000070b Crashed Thread:  0" error. 
    One of the solutions I read to fix this problem was to try deleting my User Prefrences. I did this, restarted, and now when I tried to use the program, I was able to open DVD SP, import an asset, and SAVE! However, once I tried to drag an asset into the menu screen or do anything productive with those assets, I get a new error message that reads "The document “soultrain” could not be saved."
    I tried opening an old file from before the upgrade and was able to not only access it, but burn a fully fuctional dvd.  This leads me to believe that the program can't be completely incompatible with OS 10.5.6, but whats stopping me from saving?
    Another solution I read about here:  http://support.apple.com/kb/TS1113 said that the solution was to upgrade from Pro Application Support 3.1 to Pro Application Support 4.0.  It describes almost exactly the problem I'm having, however, PAS 4.0 doesn't seem to be available anywhere on the Apple Support Downloads site.  I google searched the patch and was able to find it elsewhere. However when I tried to install it I was now getting a Javascript error that read: "You cannot install Pro Application Support on this volume. There was an error evaluating JavaScript for the package."
    After upgrading Java, restarting, and trying again, I still get the same error.
    I am at a total loss.  I really really need some help with this problem. 

    I don't know if this helps, but I'm still working on this problem and took a screen shot of my Console Message errors:
    What's happening here is opening the program, trying to save and it crashes. Then trying to open the program again and it crashing before it even opens.  Finally opening the program a third time and trying to save it using "save as" instead of "save" (which I found one forum recommending) and it crashing again. 

  • Lightscribe dvd supermultidrive/cd writer will not operate

    Hi. I'm new to the forum. I have a HP Mediacenter pc 2006. For a while now, I cannot get the dvd/cd to operate.
    It says that there is registry errors code 19. Does anyone know of a way to fix this. I've tried to reinstall the device drivers,but it says I have the correct drivers already. Any help would be greatly appreciated.

    Hi kardash,
    Thank you for the quick reply!
    Based on the information you have re-posted with, I recommend following this document on Drive Cannot Write to Writable Discs (Windows Vista). If you are not able to read or play CDs/DVDs in the disc drive, please follow this document on CD/DVD Drive is not Detected (Windows Vista). This should help in finding a solution.
    As for the Registry Error 19, please follow this resource on Device Manager Information for Windows Vista. This document will provide a description for the error code, as well as a suggested resolution. If you need to, you can also use this document on Downloading or Updating Software and Drivers for HP Computers.
    Please re-post with the results of your troubleshooting, and I will diligently follow up with you!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Apple DVD Player 5.4 Doesn't Work

    I recently updated my MacPro to 10.6.5. Included in this update is a new version of Apple's DVD Player. The new version of DVD Player is 5.4. The installation package includes the application and an entirely new system framework to support it. Unfortunately, it doesn't work on my system.
    As a reference point, my MBP is still running 10.6.4. It has DVD Player 5.2. It works great.
    I'm unable to play DVD's or load a VIDEO_TS folder using the latest version of DVD Player on my MacPro. I didn't have any problems with DVD Player up until the Mac OS 10.6.5 update.
    Further, VLC on my MacPro works fine. This problem exists for all users on my MacPro.
    I tried to reinstall DVD Player 5.4 using Pacifist, but there was no change. I dl'd the 10.6.5 package from Apple when I did this. I also tried to reinstall the 5.4.1 framework.
    Has anyone else experienced this problem? Are there any known fixes, I prefer to use DVD player over VLC. Nothing against VLC, but DVD Player is a great app when it works.
    Thanks!

    Yea, I got to thinking about that after I posted. You're right, Boot Camp is safe.
    What's very strange is I tried a LOTR DVD over the weekend and it played fine. Thinking it to be a fluke, I tried another ... this time Elf. It worked. I then tried playing from two different VIDEO_TS folders on my HD. They worked too.
    I can't explain it. I tried to surgically remove all of the key video player components (including the framework). I then reinstalled these files using the 10.6.5 combo update. No change. I then restored these files using Time Machine (I didn't want to risk messing something else up as there are quite a lot of dependencies stitched together via symlinks at the framework level).
    So I should've been back to where I started. A few days later, everything appears to be working.
    I have no answers, but I'm glad to have my DVD Player back.
    This is off topic, but I also solved a problem I've been having with my mouse for YEARS. I had problems with the Mighty Mouse and later the Magic Mouse on my MacPro. I thought it was my desk. That is, I thought the surface of my desk was causing tracking problems. Very annoying tracking problems. I know, I should've considered bluetooth, but I didn't. To be honest, I wasn't experiencing any other bluetooth related problems so I really thought it was my desk. This problem became unbearable when I was working in Maya last week so I started researching mouse surfaces and mouse pads again (ha!). I inadvertently found this obscure PDF via google. It was written by some guy who was having the same problem 2-3 years ago. Following this guy's procedure, I cracked open my MacPro and moved three difficult to reach wires. Now my Magic Mouse is as smooth as glass. As is my older Mighty Mouse. It turns out that my Airport and Bluetooth modules were wired incorrectly at the factory in China. Honestly, this has been screwed up since 2007. Apparently, this has happened to quite a few people though I never heard about it until now. It would've been nice if Apple would've published something when they discovered they had shipped units with incorrectly wired Bluetooth modules! (if they did, I've yet to find anything from them on the subject). Whatever, I'm glad to have my MacPro's mouse working properly.

  • Swalife websight doesn't operate correctly on one of our computers and works fine on the other

    We have two Dell laptops. For explanation of this problem, I will refer to them as #1 and #2. I have used Firefox on #1 for 3 years now. Our other computer, #2 has been using IE, but because of IE issues, we decided to switch it to FF also. It is necessary for us to use swalife.com website for work. When I log in to swa life on #1 it works fine as it always has. We downloaded FF 18.0 on #2 and the swalife site only has partial functionality. We can log in to the site on #2 and it recognizes the names and passwords, but will not open the default opening page. The default page has 4 tabs, news, need to know, swa pics, and profiles. The only tab out of the three that works correctly is the need to know tab. The other three have a window that opens that displays the following message:
    This Connection is Untrusted
    You have asked Firefox to connect
    securely to blog.swalife.com, but we can't confirm that your
    connection is secure.
    Normally, when you try to connect securely,
    sites will present trusted identification to prove that you are
    going to the right place. However, this site's identity can't be verified.
    What Should I Do?
    If you usually connect to
    this site without problems, this error could mean that someone is
    trying to impersonate the site, and you shouldn't continue.
    blog.swalife.com uses an invalid security certificate.
    The certificate is not trusted because no issuer chain was provided.
    (Error code: sec_error_unknown_issuer)
    Yesterday I contacted Norton security. They took control of #2 and said that it wasn't a security problem and that they couldn't fix it. He suggested using Chrome, since swalife.com operated fine with chrome on #2. That is not the solution I wanted. We also contacted Tech Support at swalife and they had no idea what the problem could be. My question to you is...if swalife.com operates correctly on#1 with FF18.0, why can't #2 operate on FF18.0? Both computers are in the same room, using the same router, and are on the same Insight cable connection. I have checked and compared security settings on both computers and both appear to be identical. Please note, that in the Untrusted window it says that "You have asked FF to connect securely to blog.swalife.com but we can't confirm that your connection is secure." We are not asking to connect to blog.swalife. We never use it. The site sends us to this window directly from the log on page.
    Please Help
    Larry Krauss
    [email protected]
    614-448-8035

    The blog.swalife.com server doesn't send a required intermediate certificate.
    You can inspect the certificate chain via a site like this:
    *http://www.networking4all.com/en/support/tools/site+check/
    You can Copy and Paste the certificate text of the intermediate certificate (COMODO High-Assurance Secure Server CA) to a .cer text file and import the certificate in the Certificate Manager or use Firefox > New Tab > Open File.
    DO NOT set any trust bits, those are only required for root certificates and should never be set for intermediate certificates.

  • HT3910 Snow Leopard install DVD fail. Installer doesn't show up.

    I had upgraded my Mac to 10.9 and i wanted a fresh start. So i erased the hard drive and then i tried to install Snow Leopard using the install DVD . I keep trying and nothing happens, the installer doesn't show up plus i can't see any startup disks. I tried remote install using a windows computer but nothing. Any suggestions?

    Have you ever run 10.6 on that computer? If Internet Recovery gave you Lion, is that the OS your computer came with? If so, you can't shouldn't install Snow Leopard.
    Install OSX Restrictions
    CD/DVD Loading Problems                        
    CD/DVD Drive - Troubleshooting
    CD/DVD Drive - Troubleshooting (2)

  • Why my dvd drive on MBPro doesn't recognize blank cd-r and dvd-r?

    Super drive on my MB Pro doesn't recognize blank CD's and DVD's.Both are ejected after 10-15 seconds.It reads all other CD's and DVD's....
    That means I cannot burn new CD's and DVD's.Any sugestions?

    OK
    Then the best way to pin this problem down is to split the process into two parts
    • Encoding
    • Burning
    By "Save as a DiskImage" - If this works and plays OK with DVD tool - then
    • Material Used are OK
    • iDVD and Encoding is OK
    Then use Disk Util tool to burn to DVD and now
    • I only use Verbatim
    • DVD-R (as they play on more and even older DVD-players)
    • Burn Speed set down to x2 or x4 - to get less Burn Errors (and even the DVD will play on a PC or the Mac that made it - NOT ALWAYS SO ! )
    • and I never let Start-Up Hard Disk go under 25Gb free space
    • NO other program during process or burning - e.g. Screen, Energy-Savers, Internet, etc - No Nothing
    BTW - DO NOT pop in any CD or DVD until Mac ASK'S for it ! else You wind up with a Data-DVD if burned.
    Yours Bengt W

  • DVD studio pro track doesn't accept HD video asset??

    Hello,
    I am ready to burn my project on a DVD but it doesn't seem to accept HD resolution in DVD studio pro?
    I exported my project into a quicktime movie in FCP using Apple ProRes 422, aspect ratio HD(960x720).
    When I drag the imported quicktime movie onto the track in DVD studio pro, it automatically corrects the resolution setting of the track to 720x480 and 1280x720 option turns not selectable.
    Why does this happen and how could I set the track in DVD studio pro to burn the disc without changing the aspect ratio and quality of the video??
    please help!
    thanks in advance.
    YK

    Hi Javi,
    thanks for your message.
    I was reading the discussion here and it looks like this explains the same question:
    https://discussions.apple.com/message/4987864#4987864
    meanwhile i have exported the project using compressor with settings for DVD. this time DVD studio pro seems to import the video fine and is able to burn.
    It is working but I hope i am making the right action for the best quality result. please let me know if you have any thoughts on this.
    many thanks!

  • Burned DVD plays on Macs, doesn't play on windows????

    Hi, got a quick question and I think there is an easy answer but I am missing it.
    I burned my project to DVD and it works perfectly on all of the Macs in the company. The problem is it doesn't play on any of the Windows machines or in standard DVD players.
    What gives? Anyone know what is causing this?
    Thanks in advance.
    DG

    It's almost always the choice of media.
    Suggest you look at the label and then google for comments about that supplier.
    You can also search here for terms that are similar to your problem. Unfortunately, hardly anyone ever comes back, closes their discussions, and tells us if they solve their problems so there may not be any helpful threads.
    Hope you get better advice soon. give the wonks a day or tow, sometimes DVDSP is a low traffic area.
    bogiesan

  • I have a 2006 iMac.  I am trying to hook up a LG external DVD writer.  It doesn't appear on the desktop when I hook it up.  Any suggestions?

    I have replaced the internal DVD/CD drive twice in the last 1 1/2 years.  Now when I insert a DVD or CD, it does not appear on the desk top or anywhere else.  I can't eject it.  I tried everything possible that I could think of.  After a few weeks, the CD decided to eject when I started up my computer.  I put another DVD in and this time it showed up on the desk top, so I tried to burn something to it and the computer told me there wasn't any device available to do such.  Then I could not get it to eject.  I tried shutting down the computer and starting it up, and the DVD disappeared off the desk top again.  This time I was able to get it to eject sooner.  I haven't put anything new in there since!  I purchased a third party external DVD writer.  When I hooked it up to the computer, nothing appeared on the desk top.  I put the software disc in (which is windows, but I wanted to see what it did).  It showed up on the desk top and let me open it up.  I was able to eject it from the desk top.  I then put in a blank CD to record music to.  Since there wasn't anything on my computer for the new drive, I tried dragging and dropping the songs onto the CD and it appeared to be burning the CD, but when I put the CD into my stereo, it showed error.  Many years ago I had a LaCie external drive because my computer didn't have one and it used Toast which was on my desk top.  I thought this one was supposed to just work with iTunes, but I am not sure what I am supposed to do with it.  Should the device appear on my desk top when I plug it in?  Is there some kind of software that I am supposed to have?  I am running version 10.6.8.  Thanks!

    The external DVD/CD Writer will Not appear on your desktop when you attach it to your iMac.  It will appear in "Finder", which is in your Dock.
    Hope this helps

Maybe you are looking for